Exploratory and dust-bathing behaviour in laying hens kept in commercial aviaries and furnished cages

The aim of the present thesis was to identify management factors that affect the extent of exploratory behaviour (ground pecking, scratching) as well as quantitative and qualitative as-pects of dust-bathing behaviour in laying hens kept in commercial furnished cages (‘small group housing’) and aviaries. Based on the results, it should be considered which management measures can be recommended for farmers to enhance hen welfare. The feasibility of direct observations of dust-bathing behaviour as well as video observations of exploratory and dust-bathing behaviour was tested in two aviaries. The direct observations were judged to be unfeasible under the conditions encountered. For the analysis of the video recordings, different sampling intervals for instantaneous scan sampling, different extents of observation time, and intra- and inter-observer reliabilities were compared and the most ap-propriate observation scheme selected. Applying the selected scheme (observing the first 16 minutes of every hour distributed over two consecutive light days with a sample interval of two minutes), within the range of environmental conditions found in 22 aviaries, pecking, scratching and dust-bathing behaviour was performed on average 25, 2 and 7 % of the obser-vation time. Hen numbers in the litter were positively associated with stocking density and group size. More scratching was performed with increasing litter height as well as in humid litter. If no litter had been provided, thus substrate consisted of dust and faeces, a reduced proportion of dust-bathing was found. The same method was then used in 16 furnished cage systems. On average 12 % of the total hen number were found on the scratching mats. The hens spent 8 % of the observed time pecking at the mat, 4 % dust-bathing and 0.4 % scratch-ing. Higher proportions were found on the mats and more dust-bathing behaviour occurred, if substrate was provided. Also with increasing light intensity and stocking density more hens were observed on the mats. More pecking and scratching occurred in conditions of higher stocking density, probably due to social facilitation, and of increased mat area per hen. With increasing mat numbers per cage less pecking was observed. Wider mats led to increased dust-bathing behaviour. Finally, 129 dust-baths recorded in 17 aviaries were analysed in detail. On average they lasted 17 minutes, with the tossing phase taking 69 % of this time, including on average 2 vertical wing shakes and 3 scratches with one leg per minute tossing phase. Dust-bath duration de-creased with increasing litter height. Litter type influenced all recorded parameters: dust-bath duration was highest on straw and lowest on fine material and fine material mixed with straw, where on both also the proportion of the tossing phase was lowest. The number of vertical wing shakes during the dust-bath was highest on straw and lowest on fine material mixed with straw as against the frequency of vertical wing shaking that was lowest on straw and highest on fine material. If dust-bathing hens were disturbed twice or more, dust-bathing duration decreased. With increasing light intensity a decreased proportion of the tossing phase as well as a reduced number of vertical wing shakes were recorded. Possibly the light stimulated the hens to dust-bath more often with less tossing behaviour per performance. The observed variation of the dust-bathing parameters could reflect successful adaptation or frustration of the hens. The litter and light conditions on the investigated farms were predominantly restrictive in terms of stimulation of exploration and dust-bathing behaviour. Thus, it was only possible to analyse possible associations between these factors and exploration and dust-bathing behav-iour within the range found. Based on the results the following management recommendations can be given: To allow hens in furnished cages more normal activity, substrate availability should be improved and mat space and light intensity increased. With regard to aviaries as well litter availability should be improved. Litter height should not be too low. Disturbances during dust-bathing should be prevented, but no influencing factors could be identified.

Schauder – Zur Dekonstruktion eines Spürens

Zusammenfassung: Ziel der Arbeit ist den Sinn von Schauder philosophisch zu erhellen. An einem Einzelphänomen, wie es so bisher nicht behandelt wurde, wird zugleich das Geflecht von Affekt/Emotion/Gefühl, gestützt auf Hegel, Heidegger, Husserl, Freud und Lacan, in immer neuen Ansätzen kritisch reflektiert und Zug um Zug mit Derrida dekonstruiert. In einem Textverfahren, das sich auch grafisch durch gegenübergestellte Kolumnen auszeichnet, werden heterogene Ansätze zum Sinn von Schauder mit dekonstruktivistischen Einsichten konfrontiert. Die Ansätze, Schauder über Datum, Begriff, Phänomen oder Strukturelement bestimmen zu wollen, durchdringen sich dabei mit denjenigen, die sich einer solchen Bestimmung entziehen (Hegels Negativität, Heideggers Seinsentzug oder Lacans Signifikantenmangel). Am Fokus Schauder, an dem sich das Fiktive einer mit sich selbst identischen Präsenz besonders eindringlich darstellt, werden so spezifische Aporien der Metaphysik der Präsenz entfaltet und die Geschlossenheit logozentristischer Systeme in die Bewegung einer anderen Öffnung und Schließung im Sinn der Schrift bzw. des allgemeinen Textes transformiert. Neben der différance, dem Entzug der Metapher, dem Supplement und dem Gespenstischen stützt sich die Arbeit auf die Iterabilität, bei der im selben Zug die Identität des Sinns gestiftet und zerstreut wird (Dissemination). Im Kapitel Piloerection werden Ambivalenzen und Paradoxien des Schauders am Beispiel von computergestützten empirisch-psychologischen Studien aufgezeigt. Im Kapitel Atopologie des Schauders prädikative, propositionale und topologische Bedingungen zum Sinn von Schauder analysiert und dekonstruiert. Ebenso, im Folgekapitel Etymon, etymologische und technisch-mediale Bedingungen. Im Schlußkapitel Maß, Anmaß, Unmaß der Empfindung des Schauders wird am Beispiel der konkreten Beiträge zum Schauder von Aristoteles, Kant, Fechner, Otto, Klages, Lorenz und Adorno aufgezeigt, dass (1) ein Schauder nicht von einem Außen aus an-gemessen werden kann, (2) sich im Schauder die metaphysische Opposition von Fiktion und Realität in einer Unentscheidbarkeit zerstreut, (3) dass trotz der Heterogenität der Ansätze in diesen Beiträgen eine Komplizenschaft zum Ausdruck kommt: ein Begehren nach Präsenz, das durch den Ausschluß des Anderen zugleich die Gewalt des Einen produziert, (4) dass der Signifikant Schauder, der selbst in Abwesenheit eines Referenten, eines bestimmten Signifikats, einer aktuellen Bedeutungs­intention, eines Sen­ders oder Empfängers funktioniert, als verändertes Zu­rückbleiben eines differenzieller Zeichens betrachtet werden muss, als Effekt von Spuren, die sich nur in ihrem eige­nen Auslöschen ereignen. Die Arbeit schließt mit dem Vorschlag, Spüren jenseits von Arché, Telos oder Eschaton, jenseits eines Phallogozentrismus in der derridaschen Spur zu denken. Nicht zuletzt über diese Pfropfung, wie sie im Französischen [trace] so nicht möglich ist, schließt sie als deutschsprachiger Beitrag an sein Werk an.

Facilitating Mechanical Design with Augmented Reality

By enhancing a real scene with computer generated objects, Augmented Reality (AR), has proven itself as a valuable Human-Computer Interface (HCI) in numerous application areas such as medical, military, entertainment and manufacturing. It enables higher performance of on-site tasks with seamless presentation of up-to-date, task-related information to the users during the operation. AR has potentials in design because the current interface provided by Computer-aided Design (CAD) packages is less intuitive and reports show that the presence of physical objects help design thinking and communication. This research explores the use of AR to improve the efficiency of a design process, specifically in mechanical design.

PRIM an Open Mobile Robot Platform. Motivation, Present and Future Trends

This paper is focused on the robot mobile platform PRIM (platform robot information multimedia). This robot has been made in order to cover two main needs of our group, on one hand the need for a full open mobile robotic platform that is very useful in fulfilling the teaching and research activity of our school community, and on the other hand with the idea of introducing an ethical product which would be useful as mobile multimedia information point as a service tool. This paper introduces exactly how the system is made up and explains just what the philosophy is behind this work. The navigation strategies and sensor fusion, where machine vision system is the most important one, are oriented towards goal achievement and are the key to the behaviour of the robot

ICTINEUAUV wins the First SAUC-E competition

A pioneer team of students of the University of Girona decided to design and develop an autonomous underwater vehicle (AUV) called ICTINEU-AUV to face the Student Autonomous Underwater Challenge-Europe (SAUC-E). The prototype has evolved from the initial computer aided design (CAD) model to become an operative AUV in the short period of seven months. The open frame and modular design principles together with the compatibility with other robots previously developed at the lab have provided the main design philosophy. Hence, at the robot's core, two networked computers give access to a wide set of sensors and actuators. The Gentoo/Linux distribution was chosen as the onboard operating system. A software architecture based on a set of distributed objects with soft real time capabilities was developed and a hybrid control architecture including mission control, a behavioural layer and a robust map-based localization algorithm made ICTINEU-AUV the winning entry

Abstracting qualitative information for process supervision

Supervisory systems evolution makes the obtaining of significant information from processes more important in the way that the supervision systems' particular tasks are simplified. So, having signal treatment tools capable of obtaining elaborate information from the process data is important. In this paper, a tool that obtains qualitative data about the trends and oscillation of signals is presented. An application of this tool is presented as well. In this case, the tool, implemented in a computer-aided control systems design (CACSD) environment, is used in order to give to an expert system for fault detection in a laboratory plant

Semiactive backstepping control for vibration attenuation in structures equipped with magnetorheological actuatorscat

This paper deals with the problem of semiactive vibration control of civil engineering structures subject to unknown external disturbances (for example, earthquakes, winds, etc.). Two kinds of semiactive controllers are proposed based on the backstepping control technique. The experimental setup used is a 6-story test structure equipped with shear-mode semiactive magnetorheological dampers being installed in the Washington University Structural Control and Earthquake Engineering Laboratory (WUSCEEL). The experimental results obtained have verified the effectiveness of the proposed control algorithms

How to do a quick cast on.

Domestic knitting machine tutorial.

how to transfer stitches

domestic knitting machine tutorial

how to change colour

domestic knitting machine tutorial

how to knit with part/hold buttons

domestic knitting machine tutorial

how to do a 2 colour punchcard

domestic knitting machine tutorial

how to use the tuck function on a punchcard.

domestic knitting machine tutorial

how to change a needle

domestic knitting machine tutorial

Docencia práctica en los laboratorios de las ingenierías de informática apoyada en herramientas CASE.

Aceptado para su publicación en las actas del Segundo Taller de trabajo en Ingeniería del Software basada en componentes distribuidos ISCDISï01. En colaboración con VI Jornadas de Ingeniería de Software y Bases de Datos (Almagro, Ciudad Real - 2 de noviembre de 2001)