Enhancing Evacuation Plans with a Situation Awareness System Based on End-User Knowledge Provision.

Recent disasters have shown that having clearly defined preventive procedures and decisions is a critical component that minimizes evacuation hazards and ensures a rapid and successful evolution of evacuation plans. In this context, we present our Situation-Aware System for enhancing Evacuation Plans (SASEP) system, which allows creating end-user business rules that technically support the specific events, conditions and actions related to evacuation plans. An experimental validation was carried out where 32 people faced a simulated emergency situation, 16 of them using SASEP and the other 16 using a legacy system based on static signs. From the results obtained, we compare both techniques and discuss in which situations SASEP offers a better evacuation route option, confirming that it is highly valuable when there is a threat in the evacuation route. In addition, a study about user satisfaction using both systems is presented showing in which cases the systems are assessed as satisfactory, relevant and not frustrating.

Design and technical evaluation of an enhanced location-awareness service enabler for spatial disorientation management of elderly with mild cognitive impairment

The progressive ageing of population has turned the mild cognitive impairment (MCI) into a prevalent disease suffered by elderly. Consequently, the spatial disorientation has become a significant problem for older people and their caregivers. The ambient-assisted living applications are offering location-based services for empowering elderly to go outside and encouraging a greater independence. Therefore, this paper describes the design and technical evaluation of a location-awareness service enabler aimed at supporting and managing probable wandering situations of a person with MCI. Through the presence capabilities of the IP multimedia subsystem (IMS) architecture, the service will alert patient's contacts if a hazardous situation is detected depending on his location. Furthermore, information about the older person's security areas has been included in the user profile managed by IMS. In doing so, the service enabler introduced contribute to “context-awareness” paradigm allowing the adaptation and personalization of services depending on user's context and specific conditions or preferences.

The chair of food Banks UPM as a tool of raising awareness and promoting a culture of rational food comsumption

The Chair of Food Banks UPM arises from a cooperation agreement between the Spanish Federation of Food Banks (FESBAL) and the Technical University of Madrid (UPM), with the aim of raising awareness and promoting rational food consumption to avoid food waste, through activities of training, transfer of knowledge and promotion of I+D+i. The aim of this paper is to reflect on the activities carried out during the first year in order to obtain learning lessons and improve the management of activities and resources.

Context-awareness in task automation services by distributed event processing

Everybody has to coordinate several tasks everyday, usually in a manual manner. Recently, the concept of Task Automation Services has been introduced to automate and personalize the task coordination problem. Several user centered platforms and applications have arisen in the last years, that let their users configure their very own automations based on third party services. In this paper, we propose a new system architecture for Task Automation Services in a heterogeneous mobile, smart devices, and cloud services environment. Our architecture is based on the novel idea to employ distributed Complex Event Processing to implement innovative mixed execution profiles. The major advantage of the approach is its ability to incorporate context-awareness and real-time coordination in Task Automation Services.

Evidence of the presence of bias in subjective metrics: analysis within a family of experiments

Context: Measurement is crucial and important to empirical software engineering. Although reliability and validity are two important properties warranting consideration in measurement processes, they may be influenced by random or systematic error (bias) depending on which metric is used. Aim: Check whether, the simple subjective metrics used in empirical software engineering studies are prone to bias. Method: Comparison of the reliability of a family of empirical studies on requirements elicitation that explore the same phenomenon using different design types and objective and subjective metrics. Results: The objectively measured variables (experience and knowledge) tend to achieve more reliable results, whereas subjective metrics using Likert scales (expertise and familiarity) tend to be influenced by systematic error or bias. Conclusions: Studies that predominantly use variables measured subjectively, like opinion polls or expert opinion acquisition.

Utilizing the Internet of Things to promote energy awareness and efficiency at discrete production processes: Practices and methodology

El actual contexto de fabricación, con incrementos en los precios de la energía, una creciente preocupación medioambiental y cambios continuos en los comportamientos de los consumidores, fomenta que los responsables prioricen la fabricación respetuosa con el medioambiente. El paradigma del Internet de las Cosas (IoT) promete incrementar la visibilidad y la atención prestada al consumo de energía gracias tanto a sensores como a medidores inteligentes en los niveles de máquina y de línea de producción. En consecuencia es posible y sencillo obtener datos de consumo de energía en tiempo real proveniente de los procesos de fabricación, pero además es posible analizarlos para incrementar su importancia en la toma de decisiones. Esta tesis pretende investigar cómo utilizar la adopción del Internet de las Cosas en el nivel de planta de producción, en procesos discretos, para incrementar la capacidad de uso de la información proveniente tanto de la energía como de la eficiencia energética. Para alcanzar este objetivo general, la investigación se ha dividido en cuatro sub-objetivos y la misma se ha desarrollado a lo largo de cuatro fases principales (en adelante estudios). El primer estudio de esta tesis, que se apoya sobre una revisión bibliográfica comprehensiva y sobre las aportaciones de expertos, define prácticas de gestión de la producción que son energéticamente eficientes y que se apoyan de un modo preeminente en la tecnología IoT. Este primer estudio también detalla los beneficios esperables al adoptar estas prácticas de gestión. Además, propugna un marco de referencia para permitir la integración de los datos que sobre el consumo energético se obtienen en el marco de las plataformas y sistemas de información de la compañía. Esto se lleva a cabo con el objetivo último de remarcar cómo estos datos pueden ser utilizados para apalancar decisiones en los niveles de procesos tanto tácticos como operativos. Segundo, considerando los precios de la energía como variables en el mercado intradiario y la disponibilidad de información detallada sobre el estado de las máquinas desde el punto de vista de consumo energético, el segundo estudio propone un modelo matemático para minimizar los costes del consumo de energía para la programación de asignaciones de una única máquina que deba atender a varios procesos de producción. Este modelo permite la toma de decisiones en el nivel de máquina para determinar los instantes de lanzamiento de cada trabajo de producción, los tiempos muertos, cuándo la máquina debe ser puesta en un estado de apagada, el momento adecuado para rearrancar, y para pararse, etc. Así, este modelo habilita al responsable de producción de implementar el esquema de producción menos costoso para cada turno de producción. En el tercer estudio esta investigación proporciona una metodología para ayudar a los responsables a implementar IoT en el nivel de los sistemas productivos. Se incluye un análisis del estado en que se encuentran los sistemas de gestión de energía y de producción en la factoría, así como también se proporcionan recomendaciones sobre procedimientos para implementar IoT para capturar y analizar los datos de consumo. Esta metodología ha sido validada en un estudio piloto, donde algunos indicadores clave de rendimiento (KPIs) han sido empleados para determinar la eficiencia energética. En el cuarto estudio el objetivo es introducir una vía para obtener visibilidad y relevancia a diferentes niveles de la energía consumida en los procesos de producción. El método propuesto permite que las factorías con procesos de producción discretos puedan determinar la energía consumida, el CO2 emitido o el coste de la energía consumida ya sea en cualquiera de los niveles: operación, producto o la orden de fabricación completa, siempre considerando las diferentes fuentes de energía y las fluctuaciones en los precios de la misma. Los resultados muestran que decisiones y prácticas de gestión para conseguir sistemas de producción energéticamente eficientes son posibles en virtud del Internet de las Cosas. También, con los resultados de esta tesis los responsables de la gestión energética en las compañías pueden plantearse una aproximación a la utilización del IoT desde un punto de vista de la obtención de beneficios, abordando aquellas prácticas de gestión energética que se encuentran más próximas al nivel de madurez de la factoría, a sus objetivos, al tipo de producción que desarrolla, etc. Así mismo esta tesis muestra que es posible obtener reducciones significativas de coste simplemente evitando los períodos de pico diario en el precio de la misma. Además la tesis permite identificar cómo el nivel de monitorización del consumo energético (es decir al nivel de máquina), el intervalo temporal, y el nivel del análisis de los datos son factores determinantes a la hora de localizar oportunidades para mejorar la eficiencia energética. Adicionalmente, la integración de datos de consumo energético en tiempo real con datos de producción (cuando existen altos niveles de estandarización en los procesos productivos y sus datos) es esencial para permitir que las factorías detallen la energía efectivamente consumida, su coste y CO2 emitido durante la producción de un producto o componente. Esto permite obtener una valiosa información a los gestores en el nivel decisor de la factoría así como a los consumidores y reguladores. ABSTRACT In today‘s manufacturing scenario, rising energy prices, increasing ecological awareness, and changing consumer behaviors are driving decision makers to prioritize green manufacturing. The Internet of Things (IoT) paradigm promises to increase the visibility and awareness of energy consumption, thanks to smart sensors and smart meters at the machine and production line level. Consequently, real-time energy consumption data from the manufacturing processes can be easily collected and then analyzed, to improve energy-aware decision-making. This thesis aims to investigate how to utilize the adoption of the Internet of Things at shop floor level to increase energy–awareness and the energy efficiency of discrete production processes. In order to achieve the main research goal, the research is divided into four sub-objectives, and is accomplished during four main phases (i.e., studies). In the first study, by relying on a comprehensive literature review and on experts‘ insights, the thesis defines energy-efficient production management practices that are enhanced and enabled by IoT technology. The first study also explains the benefits that can be obtained by adopting such management practices. Furthermore, it presents a framework to support the integration of gathered energy data into a company‘s information technology tools and platforms, which is done with the ultimate goal of highlighting how operational and tactical decision-making processes could leverage such data in order to improve energy efficiency. Considering the variable energy prices in one day, along with the availability of detailed machine status energy data, the second study proposes a mathematical model to minimize energy consumption costs for single machine production scheduling during production processes. This model works by making decisions at the machine level to determine the launch times for job processing, idle time, when the machine must be shut down, ―turning on‖ time, and ―turning off‖ time. This model enables the operations manager to implement the least expensive production schedule during a production shift. In the third study, the research provides a methodology to help managers implement the IoT at the production system level; it includes an analysis of current energy management and production systems at the factory, and recommends procedures for implementing the IoT to collect and analyze energy data. The methodology has been validated by a pilot study, where energy KPIs have been used to evaluate energy efficiency. In the fourth study, the goal is to introduce a way to achieve multi-level awareness of the energy consumed during production processes. The proposed method enables discrete factories to specify energy consumption, CO2 emissions, and the cost of the energy consumed at operation, production and order levels, while considering energy sources and fluctuations in energy prices. The results show that energy-efficient production management practices and decisions can be enhanced and enabled by the IoT. With the outcomes of the thesis, energy managers can approach the IoT adoption in a benefit-driven way, by addressing energy management practices that are close to the maturity level of the factory, target, production type, etc. The thesis also shows that significant reductions in energy costs can be achieved by avoiding high-energy price periods in a day. Furthermore, the thesis determines the level of monitoring energy consumption (i.e., machine level), the interval time, and the level of energy data analysis, which are all important factors involved in finding opportunities to improve energy efficiency. Eventually, integrating real-time energy data with production data (when there are high levels of production process standardization data) is essential to enable factories to specify the amount and cost of energy consumed, as well as the CO2 emitted while producing a product, providing valuable information to decision makers at the factory level as well as to consumers and regulators.

50 Years Ago We Marched: What began on the grounds of Lincoln University, ended on the steps of the Alabama State Capitol

LINCOLN UNIVERSITY - On March 25, 1965, a bus loaded with Lincoln University students and staff arrived in Montgomery, Ala. to join the Selma march for racial and voting equality. Although the Civil Rights Act of 1964 was in force, African-Americans continued to feel the effects of segregation. The 1960s was a decade of social unrest and change. In the Deep South, specifically Alabama, racial segregation was a cultural norm resistant to change. Governor George Wallace never concealed his personal viewpoints and political stance of the white majority, declaring “Segregation now, segregation tomorrow, segregation forever.” The march was aimed at obtaining African-Americans their constitutionally protected right to vote. However, Alabama’s deep-rooted culture of racial bias began to be challenged by a shift in American attitudes towards equality. Both black and whites wanted to end discrimination by using passive resistance, a movement utilized by Dr. Martin Luther King Jr. That passive resistance was often met with violence, sometimes at the hands of law enforcement and local citizens. The Selma to Montgomery march was a result of a protest for voting equality. The Student Nonviolent Coordinating Committee (SNCC) and the Southern Christian Leadership Counsel (SCLC) among other students marched along the streets to bring awareness to the voter registration campaign, which was organized to end discrimination in voting based on race. Violent acts of police officers and others were some of the everyday challenges protesters were facing. Forty-one participants from Lincoln University arrived in Montgomery to take part in the 1965 march for equality. Students from Lincoln University’s Journalism 383 class spent part of their 2015 spring semester researching the historical event. Here are their stories: Peter Kellogg “We’ve been watching the television, reading about it in the newspapers,” said Peter Kellogg during a February 2015 telephone interview. “Everyone knew the civil rights movement was going on, and it was important that we give him (Robert Newton) some assistance … and Newton said we needed to get involve and do something,” Kellogg, a lecturer in the 1960s at Lincoln University, discussed how the bus trip originated. “That’s why the bus happened,” Kellogg said. “Because of what he (Newton) did - that’s why Lincoln students went and participated.” “People were excited and the people along the sidewalk were supportive,” Kellogg said. However, the mood flipped from excited to scared and feeling intimidated. “It seems though every office building there was a guy in a blue uniform with binoculars standing in the crowd with troops and police. And if looks could kill me, we could have all been dead.” He says the hatred and intimidation was intense. Kellogg, being white, was an immediate target among many white people. He didn’t realize how dangerous the event in Alabama was until he and the others in the bus heard about the death of Viola Liuzzo. The married mother of five from Detroit was shot and killed by members of the Ku Klux Klan while shuttling activists to the Montgomery airport. “We found out about her death on the ride back,” Kellogg recalled. “Because it was a loss of life, and it shows the violence … we could have been exposed to that danger!” After returning to LU, Kellogg’s outlook on life took a dramatic turn. Kellogg noted King’s belief that a person should be willing to die for important causes. “The idea is that life is about something larger and more important than your own immediate gratification, and career success or personal achievements,” Kellogg said. “The civil rights movement … it made me, it made my life more significant because it was about something important.” The civil rights movement influenced Kellogg to change his career path and to become a black history lecturer. Until this day, he has no regrets and believes that his choices made him as a better individual. The bus ride to Alabama, he says, began with the actions of just one student. Robert Newton Robert Newton was the initiator, recruiter and leader of the Lincoln University movement to join Dr. Martin Luther King’s march in Selma. “In the 60s much of the civil rights activists came out of college,” said Newton during a recent phone interview. Many of the events that involved segregation compelled college students to fight for equality. “We had selected boycotts of merchants, when blacks were not allowed to try on clothes,” Newton said. “You could buy clothes at department stores, but no blacks could work at the department stores as sales people. If you bought clothes there you couldn’t try them on, you had to buy them first and take them home and try them on.” Newton said the students risked their lives to be a part of history and influence change. He not only recognized the historic event of his fellow Lincolnites, but also recognized other college students and historical black colleges and universities who played a vital role in history. “You had the S.N.C.C organization, in terms of voting rights and other things, including a lot of participation and working off the bureau,” Newton said. Other schools and places such as UNT, Greenville and Howard University and other historically black schools had groups that came out as leaders. Newton believes that much has changed from 50 years ago. “I think we’ve certainly come a long way from what I’ve seen from the standpoint of growing up outside of Birmingham, Alabama,” Newton said. He believes that college campuses today are more organized in their approach to social causes. “The campus appears to be some more integrated amongst students in terms of organizations and friendships.” Barbara Flint Dr. Barbara Flint grew up in the southern part of Arkansas and came to Lincoln University in 1961. She describes her experience at Lincoln as “being at Lincoln when the world was changing.“ She was an active member of Lincoln’s History Club, which focused on current events and issues and influenced her decision to join the Selma march. “The first idea was to raise some money and then we started talking about ‘why can’t we go?’ I very much wanted to be a living witness in history.” Reflecting on the march and journey to Montgomery, Flint describes it as being filled with tension. “We were very conscious of the fact that once we got on the road past Tennessee we didn’t know what was going to happen,” said Flint during a February 2015 phone interview. “Many of the students had not been beyond Missouri, so they didn’t have that sense of what happens in the South. Having lived there you knew the balance as well as what is likely to happen and what is not likely to happen. As my father use to say, ‘you have to know how to stay on that line of balance.’” Upon arriving in Alabama she remembers the feeling of excitement and relief from everyone on the bus. “We were tired and very happy to be there and we were trying to figure out where we were going to join and get into the march,” Flint said. “There were so many people coming in and then we were also trying to stay together; that was one of the things that really stuck out for me, not just for us but the people who were coming in. You didn’t want to lose sight of the people you came with.” Flint says she was keenly aware of her surroundings. For her, it was more than just marching forward. “I can still hear those helicopters now,” Flint recalled. “Every time the helicopters would come over the sound would make people jump and look up - I think that demonstrated the extent of the tenseness that was there at the time because the helicopters kept coming over every few minutes.” She said that the marchers sang “we are not afraid,” but that fear remained with every step. “Just having been there and being a witness and marching you realize that I’m one of those drops that’s going to make up this flood and with this flood things will move,” said Flint. As a student at Lincoln in 1965, Flint says the Selma experience undoubtedly changed her life. “You can’t expect to do exactly what you came to Lincoln to do,” Flint says. “That march - along with all the other marchers and the action that was taking place - directly changed the paths that I and many other people at Lincoln would take.” She says current students and new generations need to reflect on their personal role in society. “Decide what needs to be done and ask yourself ‘how can I best contribute to it?’” Flint said. She notes technology and social media can be used to reach audiences in ways unavailable to her generation in 1965. “So you don’t always have to wait for someone else to step out there and say ‘let’s march,’ you can express your vision and your views and you have the means to do so (so) others can follow you. Jaci Newsom Jaci Newsom came to Lincoln in 1965 from Atlanta. She came to Lincoln to major in sociology and being in Jefferson City was largely different from what she had grown up with. “To be able to come into a restaurant, sit down and be served a nice meal was eye-opening to me,” said Newsom during a recent interview. She eventually became accustomed to the relaxed attitude of Missouri and was shocked by the situation she encountered on an out-of-town trip. “I took a bus trip from Atlanta to Pensacola and I encountered the worse racism that I have ever seen. I was at bus stop, I went in to be served and they would not serve me. There was a policeman sitting there at the table and he told me that privately owned places could select not to serve you.” Newsom describes her experience of marching in Montgomery as being one with a purpose. “We felt as though we achieved something - we felt a sense of unity,” Newsom said. “We were very excited (because) we were going to hear from Martin Luther King. To actually be in the presence of him and the other civil rights workers there was just such enthusiasm and excitement yet there was also some apprehension of what we might encounter.” Many of the marchers showed their inspiration and determination while pressing forward towards the grounds of the Alabama Capitol building. Newsom recalled that the marchers were singing the lyrics “ain’t gonna let nobody turn me around” and “we shall overcome.” “ I started seeing people just like me,” Newsom said. “I don’t recall any of the scowling, the hitting, the things I would see on TV later. I just saw a sea of humanity marching towards the Capitol. I don’t remember what Martin Luther King said but it was always the same message: keep the faith; we’re going to get where we’re going and let us remember what our purpose is.” Newsom offers advice on what individuals can do to make their society a more productive and peaceful place. “We have come a long way and we have ways to change things that we did not have before,” Newsom said. “You need to work in positive ways to change.” Referencing the recent unrest in Ferguson, Mo., she believes that people become destructive as a way to show and vent anger. Her generation, she says, was raised to react in lawful ways – and believe in hope. “We have faith to do things in a way that was lawful and it makes me sad what people do when they feel without hope, and there is hope,” Newsom says. “Non-violence does work - we need to include everyone to make this world a better place.” Newsom graduated from Lincoln in 1969 and describes her experience at Lincoln as, “I grew up and did more growing at Lincoln than I think I did for the rest of my life.”

Female preference for swords in Xiphophorus helleri reflects a bias for large apparent size

Swordtail fish (Poeciliidae: genus Xiphophorus) are a paradigmatic case of sexual selection by sensory exploitation. Female preference for males with a conspicuous “sword” ornament is ancestral, suggesting that male morphology has evolved in response to a preexisting bias. The perceptual mechanisms underlying female mate choice have not been identified, complicating efforts to understand the selection pressures acting on ornament design. We consider two alternative models of receiver behavior, each consistent with previous results. Females could respond either to specific characteristics of the sword or to more general cues, such as the apparent size of potential mates. We showed female swordtails a series of computer-altered video sequences depicting a courting male. Footage of an intact male was preferred strongly to otherwise identical sequences in which portions of the sword had been deleted selectively, but a disembodied courting sword was less attractive than an intact male. There was no difference between responses to an isolated sword and to a swordless male of comparable length, or between an isolated sword and a homogenous background. Female preference for a sworded male was abolished by enlarging the image of a swordless male to compensate for the reduction in length caused by removing the ornament. This pattern of results is consistent with mate choice being mediated by a general preference for large males rather than by specific characters. Similar processes may account for the evolution of exaggerated traits in other systems.

Crossover isomer bias is the primary sequence-dependent property of immobilized Holliday junctions

Recombination of genes is essential to the evolution of genetic diversity, the segregation of chromosomes during cell division, and certain DNA repair processes. The Holliday junction, a four-arm, four-strand branched DNA crossover structure, is formed as a transient intermediate during genetic recombination and repair processes in the cell. The recognition and subsequent resolution of Holliday junctions into parental or recombined products appear to be critically dependent on their three-dimensional structure. Complementary NMR and time-resolved fluorescence resonance energy transfer experiments on immobilized four-arm DNA junctions reported here indicate that the Holliday junction cannot be viewed as a static structure but rather as an equilibrium mixture of two conformational isomers. Furthermore, the distribution between the two possible crossover isomers was found to depend on the sequence in a manner that was not anticipated on the basis of previous low-resolution experiments.

The atypical codon usage of the plant psbA gene may be the remnant of an ancestral bias

The psbA gene of the chloroplast genome has a codon usage that is unusual for plant chloroplast genes. In the present study the evolutionary status of this codon usage is tested by reconstructing putative ancestral psbA sequences to determine the pattern of change in codon bias during angiosperm divergence. It is shown that the codon biases of the ancestral genes are much stronger than all extant flowering plant psbA genes. This is related to previous work that demonstrated a significant increase in synonymous substitution in psbA relative to other chloroplast genes. It is suggested, based on the two lines of evidence, that the codon bias of this gene currently is not being maintained by selection. Rather, the atypical codon bias simply may be a remnant of an ancestral codon bias that now is being degraded by the mutation bias of the chloroplast genome, in other words, that the psbA gene is not at equilibrium. A model for the evolution of selective pressure on the codon usage of plant chloroplast genes is discussed.

Sources of selection bias in evaluating social programs: An interpretation of conventional measures and evidence on the effectiveness of matching as a program evaluation method

This paper decomposes the conventional measure of selection bias in observational studies into three components. The first two components are due to differences in the distributions of characteristics between participant and nonparticipant (comparison) group members: the first arises from differences in the supports, and the second from differences in densities over the region of common support. The third component arises from selection bias precisely defined. Using data from a recent social experiment, we find that the component due to selection bias, precisely defined, is smaller than the first two components. However, selection bias still represents a substantial fraction of the experimental impact estimate. The empirical performance of matching methods of program evaluation is also examined. We find that matching based on the propensity score eliminates some but not all of the measured selection bias, with the remaining bias still a substantial fraction of the estimated impact. We find that the support of the distribution of propensity scores for the comparison group is typically only a small portion of the support for the participant group. For values outside the common support, it is impossible to reliably estimate the effect of program participation using matching methods. If the impact of participation depends on the propensity score, as we find in our data, the failure of the common support condition severely limits matching compared with random assignment as an evaluation estimator.

Nem um tostão da previdência social : o caso das bóias-frias idosas no semi-árido irrigado

Inclui notas explicativas e bibliográficas