1000 resultados para young
Resumo:
We previously proposed a method for estimating Young's modulus from instrumented nanoindentation data based on a model assuming that the indenter had a spherical-capped Berkovich geometry to take account of the bluntness effect. The method is now further improved by releasing the constraint on the tip shape, allowing it to have a much broader arbitrariness to range from a conical-tipped shape to a flat-ended shape, whereas the spherical-capped shape is just a special case in between. This method requires two parameters to specify a tip geometry, namely, a volume bluntness ratio V-r and a height bluntness ratio h(r). A set of functional relationships correlating nominal hardness/reduced elastic modulus ratio (H-n/E-r) and elastic work/total work ratio (W-e/W) were established based on dimensional analysis and finite element simulations, with each relationship specified by a set of V-r and h(r). Young's modulus of an indented material can be estimated from these relationships. The method was shown to be valid when applied to S45C carbon steel and 6061 aluminum alloy.
Resumo:
In the present paper, the hardness and Young's modulus of film-substrate systems are determined by means of nanoindentation experiments and modified models. Aluminum film and two kinds of substrates; i.e. glass and silicon, are studied. Nanoindentation XP II and continuous stiffness mode are used during the experiments. In order to avoid the influence of the Oliver and Pharr method used in the experiments, the experiment data are analyzed with the constant Young's modulus assumption and the equal hardness assumption. The volume fraction model (CZ model) proposed by Fabes et al. (1992) is used and modified to analyze the measured hardness. The method proposed by Doerner and Nix (DN formula) (1986) is modified to analyze the measured Young's modulus. Two kinds of modified empirical formula are used to predict the present experiment results and those in the literature, which include the results of two kinds of systems, i.e., a soft film on a hard substrate and a hard film on a soft substrate. In the modified CZ model, the indentation influence angle, phi, is considered as a relevant physical parameter, which embodies the effects of the indenter tip radius, pile-up or sink-in phenomena and deformation of film and substrate.
Resumo:
对于为论证球形液滴附加压强的Young-Laplace公式而设计的一个理想实验,有文献试图借助吉布斯自由能函数进行证明,本文给出符合这一条件的证明方法.
Resumo:
From 1997 to 2003, we examined the impacts of two aquatic herbicides, fluridone (Sonar; 1-methyl-3-phenyl-5-[3-(trifluromethl) phenyl]-4(1H)-pyridinone), and dipotassium salt of endothall (Aquathol K; 7-oxabicyclo[2.2.1]heptane-2,3-dicarboxylic acid), used to control dense hydrilla (Hydrilla verticillata L. f. Royle), on population characteristics of juvenile largemouth bass (Micropterus salmoides Lacepede) in small coves (<10 ha) in Lake Seminole, Georgia. In addition, we estimated areal coverage and species composition of submersed aquatic vegetation (SAV) communities in each cove. Fish and plants were sampled in both control (hydrilla infested)and herbicide treated coves in November and March- April each year. Electrofishing catch-per-effort for both number and weight of age-0 and age-1 fish for the 1997 to 2002 year classes was either the same or higher (p < 0.05) in herbicide treated than in control coves. Age-0 fish were larger (p <0.05) in treated, than in control coves in November, but at age-1 in the following spring, fish were slightly longer (p <0.05) in the control coves. Higher age-0 catches were associated with greater percent reductions in numeric catch between age-0 and age-1 and reduced lengths of fish in November indicating density-dependent effects. Age-0 fish lengths were also negatively correlated to percent cover of both total and native SAV. Total or native SAV coverages were not associated with catch-per-unit effort for number and weight, but nearly all control and herbicide treated coves had total SAV coverage greater than 40%. Applications of both Sonar and Aquathol K reduced total SAV coverage and hydrilla, permitted the establishment of native SAVs, and had either neutral or positive impacts on young largemouth bass in small coves in Lake Seminole. (PDF contains 7 pages.)
Resumo:
Background: To know how moderate-to-vigorous physical activity (MVPA) and sedentary time change across lifespan periods is needed for designing successful lifestyle interventions. We aimed to study changes in objectively measured (accelerometry) MVPA and sedentary time from childhood to adolescence and from adolescence to young adulthood. Methods: Estonian and Swedish participants from the European Youth Heart Study aged 9 and 15 years at baseline (N = 2312) were asked to participate in a second examination 6 (Sweden) to 9/10 (Estonia) years later. 1800 participants with valid accelerometer data were analyzed. Results: MVPA decreased from childhood to adolescence (21 to 22.5 min/d per year of follow-up, P = 0.01 and ,0.001, for girls and boys respectively) and also from adolescence to young adulthood (20.8 to 22.2 min/d per year, P = 0.02 and ,0.001 for girls and boys, respectively). Sedentary time increased from childhood to adolescence (+15 and +20 min/d per year, for girls and boys respectively, P,0.001), with no substantial change from adolescence to young adulthood. Changes in both MVPA and sedentary time were greater in Swedish than in Estonian participants and in boys than in girls. The magnitude of the change observed in sedentary time was 3–6 time larger than the change observed in MVPA. Conclusions: The decline in MVPA (overall change = 30 min/d) and increase sedentary time (overall change = 2:45 h/d)observed from childhood to adolescence are of concern and might increase the risk of developing obesity and other chronic diseases later in life. These findings substantially contribute to understand how key health-related behaviors (physical activity and sedentary) change across important periods of life.
Resumo:
It is with deep conviction and satisfaction that we have accepted the invitation to take part in this meeting, an occasion which enables us to reflect together on such a delicate and important question and at the same time to get to know our mutual environments,different geographically and culturally often distant but drawn to face together problems of European dimensions, such as the question of youth employment.
Resumo:
Carbon nanotubes (CNTs), due to their exceptional magnetic, electrical and mechanical properties, are promising candidates for several technical applications ranging from nanoelectronic devices to composites. Young's modulus holds the special status in material properties and micro/nano-electromechanical systems (MEMS/NEMS) design. The excellently regular structures of CNTs facilitate accurate simulation of CNTs' behavior by applying a variety of theoretical methods. Here, three representative numerical methods, i.e., Car-Parrinello molecular dynamics (CPMD), density functional theory (DFT) and molecular dynamics (MD), were applied to calculate Young's modulus of single-walled carbon nanotube (SWCNT) with chirality (3,3). The comparative studies showed that the most accurate result is offered by time consuming DFT simulation. MID simulation produced a less accurate result due to neglecting electronic motions. Compared to the two preceding methods the best performance, with a balance between efficiency and precision, was deduced by CPMD.
Resumo:
The relationships between indentation responses and Young's modulus of an indented material were investigated by employing dimensional analysis and finite element method. Three representative tip bluntness geometries were introduced to describe the shape of a real Berkovich indenter. It was demonstrated that for each of these bluntness geometries, a set of approximate indentation relationships correlating the ratio of nominal hardness/reduced Young's modulus H (n) /E (r) and the ratio of elastic work/total work W (e)/W can be derived. Consequently, a method for Young's modulus measurement combined with its accuracy estimation was established on basis of these relationships. The effectiveness of this approach was verified by performing nanoindentation tests on S45C carbon steel and 6061 aluminum alloy and microindentation tests on aluminum single crystal, GCr15 bearing steel and fused silica.
Resumo:
PURPOSE: The main goals of the present study were: 1) to review some recommendations about how to increase lean body mass; 2) to analyse whether following scientific sources of current recommendations, visible changes can be shown or not in a participant (body composition, strength and blood analyses). METHODS: One male athlete completed 12 weeks of resistance training program and following a diet protocol. Some test were determined such as, strength 6RM, blood analyses, skindfold measurements, body perimeters and impedance test. Body composition measurements were taken 3 times during the program (before-T1, after 6 weeks of intervention period-T2 and at the end of the program-T3). On the other hand, strength tests and blood analyses were performed twice (before and after the program). RESULTS: Strength was increased in general; blood analyses showed that Creatine kinase was increased a 104% and Triglycerides level was decreased a 22.5%; in the impedance test, body mass (1.6%), lean body mass (3.5%) and Body mass index (1.7%) were increased, whereas fat mass was decreased (15.5%); relaxed and contracted biceps perimeters were also increased. CONCLUSION: A muscle hypertrophy training program mixed with an appropriate diet during 12 weeks leads to interesting adaptations related to increase in body weight, lean body mass, biceps perimeters, strength and creatine kinase levels, and a decrease in fat mass.
Resumo:
[EN] The purpose of this study was to evaluate body composition and body image (perception and satisfaction) in a group of young elite soccer players and to compare the data with those of a control group (age and BMI matched). Participants were 56 volunteer males whose mean age and BMI were 19.6 (SD 1.3) years and 23.3 (SD 1.1) kg/m2, respectively. Results showed that soccer players have a higher lean mass and lower fat mass than controls. Moreover, body perception (difference between current and actual image) was more accurate in controls than in soccer players, and the results suggest a tendency for soccer players to aspire to have more muscle mass and body fat. Soccer players perceived an ideal image with significantly higher body-fat percentage than their current and actual images. There were no body-dissatisfaction differences between groups, however. Although the results are necessarily limited by the small sample size, the findings should be of interest to coaches of young elite soccer teams.