The usefulness of Usability and User Experience evaluation methods on an e-Learning platform development from a developer's perspective: A case study

The development of a web platform is a complex and interdisciplinary task, where people with different roles such as project manager, designer or developer participate. Different usability and User Experience evaluation methods can be used in each stage of the development life cycle, but not all of them have the same influence in the software development and in the final product or system. This article presents the study of the impact of these methods applied in the context of an e-Learning platform development. The results show that the impact has been strong from a developer's perspective. Developer team members considered that usability and User Experience evaluation allowed them mainly to identify design mistakes, improve the platform's usability and understand the end users and their needs in a better way. Interviews with potential users, clickmaps and scrollmaps were rated as the most useful methods. Finally, these methods were considered unanimously very useful in the context of the entire software development, only comparable to SCRUM meetings and overcoming the rest of involved factors.

Negative density dependence and environmental heterogeneity effects on tree ferns across succession in a tropical montane forest.

Although tree ferns are an important component of temperate and tropical forests, very little is known about their ecology. Their peculiar biology (e.g., dispersal by spores and two-phase life cycle) makes it difficult to extrapolate current knowledge on the ecology of other tree species to tree ferns. In this paper, we studied the effects of negative density dependence (NDD) and environmental heterogeneity on populations of two abundant tree fern species, Cyathea caracasana and Alsophila engelii, and how these effects change across a successional gradient. Species patterns harbor information on processes such as competition that can be easily revealed using point pattern analysis techniques. However, its detection may be difficult due to the confounded effects of habitat heterogeneity. Here, we mapped three forest plots along a successional gradient in the montane forests of Southern Ecuador. We employed homogeneous and inhomogeneous K and pair correlation functions to quantify the change in the spatial pattern of different size classes and a case-control design to study associations between juvenile and adult tree ferns. Using spatial estimates of the biomass of four functional tree types (short- and long-lived pioneer, shade- and partial shade-tolerant) as covariates, we fitted heterogeneous Poisson models to the point pattern of juvenile and adult tree ferns and explored the existence of habitat dependencies on these patterns. Our study revealed NDD effects for C. caracasana and strong environmental filtering underlying the pattern of A. engelii. We found that adult and juvenile populations of both species responded differently to habitat heterogeneity and in most cases this heterogeneity was associated with the spatial distribution of biomass of the four functional tree types. These findings show the effectiveness of factoring out environmental heterogeneity to avoid confounding factors when studying NDD and demonstrate the usefulness of covariate maps derived from mapped communities.

El nuevo escenario global y un modelo de negocio para la industria naval militar del 2025

Los retos y oportunidades a los que se enfrentan las organizaciones y administraciones de las primeras décadas del siglo XXI se caracterizan por una serie de fuerzas perturbadoras como la globalización, el avance de las tecnologías emergentes y el desequilibrio económico, que están actuando como impulsores de la transformación del mercado. La acción conjunta de estos factores está obligando a todas las empresas industriales a tener que trabajar con mayores y más exigentes niveles de productividad planteándose continuamente como mejorar y lograr satisfacer los requerimientos de los clientes. De esta situación surge la necesidad de volver a plantearse de nuevo ¿quién es el cliente?, ¿qué valora el cliente? y ¿cómo se pueden generan beneficios sostenibles? La aplicación de esta reflexión a la industria naval militar marca los objetivos a los que esta tesis doctoral busca dar respuesta. El primer objetivo, de carácter general, consiste en la definición de un modelo de negocio sostenible para la industria naval militar del 2025 que se adapte a los requisitos del cliente y al nuevo escenario político, económico, social, tecnológico y ambiental que rodea esta industria. El segundo objetivo, consecuencia del modelo general, trata de desarrollar una metodología para ejecutar programas de apoyo al ciclo de vida del “buque militar”. La investigación se estructura en cuatro partes: en la primera se justifica, por un lado, la necesidad del cambio de modelo y por otro se identifican los factores estructurantes para la definición del modelo. La segunda parte revisa la literatura existente sobre uno de los aspectos básicos para el nuevo modelo, el concepto Producto-Servicio. La tercera parte se centra totalmente en la industria naval militar estudiando los aspectos concretos del sector y, en base al trabajo de campo realizado, se identifican los puntos que más valoran las Marinas de Guerra y como estas gestionan al buque militar durante todo su ciclo de vida. Por último se presentan los principios del modelo propuesto y se desarrollan los pilares básicos para la ejecución de proyectos de Apoyo al Ciclo de Vida (ACV). Como resultado de la investigación, el modelo propuesto para la industria naval militar se fundamenta en once principios: 1. El buque militar (producto de alto valor añadido) debe ser diseñado y construido en un astillero del país que desarrolla el programa de defensa. 2. El diseño tiene que estar orientado al valor para el cliente, es decir, se tiene que diseñar el buque militar para que cumpla su misión, eficaz y eficientemente, durante toda su vida operativa, asegurando la seguridad del buque y de las personas y protegiendo el medio ambiente de acuerdo con las regulaciones vigentes. 3. La empresa debe suministrar soluciones integrales de apoyo al ciclo de vida al producto. 4. Desarrollar y mantener las capacidades de integración de sistemas complejos para todo el ciclo de vida del buque militar. 5. Incorporar las tecnologías digitales al producto, a los procesos, a las personas y al propio modelo de negocio. 6. Desarrollar planes de actuación con el cliente domestico a largo plazo. Estos planes tienen que estar basados en tres premisas: (i) deben incluir el ciclo de vida completo, desde la fase de investigación y desarrollo hasta la retirada del buque del servicio; (ii) la demanda debe ser sofisticada, es decir las exigencias del cliente, tanto desde la óptica de producto como de eficiencia, “tiran” del contratista y (iii) permitir el mantenimiento del nivel tecnológico y de las capacidades industriales de la compañía a futuro y posicionarla para que pueda competir en el mercado de exportación. 7. Impulsar el sector militar de exportación mediante una mayor actividad comercial a nivel internacional. 8. Fomentar la multilocalización ya que representa una oportunidad de crecimiento y favorece la exportación posibilitando el suministro de soluciones integrales en el país destino. 9. Reforzar la diplomacia institucional como palanca para la exportación. 10. Potenciar el liderazgo tecnológico tanto en producto como en procesos con políticas activas de I + D+ i. 11. Reforzar la capacidad de financiación con soluciones innovadoras. El segundo objetivo de esta tesis se centra en el desarrollo de soluciones integrales de Apoyo al Ciclo de Vida (ACV). La metodología planteada trata de minimizar la brecha entre capacidades y necesidades a lo largo de la vida operativa del barco. Es decir, el objetivo principal de los programas de ACV es que la unidad conserve durante toda su vida operativa, en términos relativos a las tecnologías existentes, las capacidades equivalentes a las que tendrá cuando entre en servicio. Los ejes de actuación para conseguir que un programa de Apoyo al Ciclo de Vida cumpla su objetivo son: el diseño orientado al valor, la ingeniería de Apoyo al Ciclo de Vida, los proyectos de refresco de tecnología, el mantenimiento Inteligente y los contratos basados en prestaciones. ABSTRACT On the first decades of the 21st century, organizations and administrations face challenges and come across opportunities threatened by a number of disruptive forces such as globalization, the ever-changing emerging technologies and the economic imbalances acting as drivers of the market transformation. This combination of factors is forcing all industrial companies to have more and higher demanding productivity levels, while bearing always in mind how to improve and meet the customer’s requirements. In this situation, we need to question ourselves again: Who is the customer? What does the customer value? And how can we deliver sustainable economic benefits? Considering this matter in a military naval industry framework sets the goals that this thesis intends to achieve. The first general goal is the definition of a new sustainable business model for the 2025 naval industry, adapted to the customer requirements and the new political, economic, social, technological and environmental scenario. And the second goal that arises as a consequence of the general model develops a methodology to implement “warship” through life support programs. The research is divided in four parts: the first one justifies, on the one hand, the need to change the existing model and, on the other, identifies the model structural factors. On the second part, current literature regarding one of the key issues on the new model (the Product-Service concept) is reviewed. Based on field research, the third part focuses entirely on military shipbuilding, analyzing specific key aspects of this field and identifying which of them are valued the most by Navies and how they manage through life cycles of warships. Finally, the foundation of the proposed model is presented and also the basic grounds for implementing a Through Life Support (TLS) program are developed. As a result of this research, the proposed model for the naval industry is based on eleven (11) key principles: 1. The warship (a high added value product) must be designed and built in a shipyard at the country developing the defense program. 2. Design must be customer value oriented, i.e.warship must be designed to effectively fulfill its mission throughout its operational life, ensuring safety at the ship and for the people and protecting the environment in accordance with current regulations. 3. The industry has to provide integrated Through Life Support solutions. 4. Develop and maintain integrated complex systems capabilities for the entire warship life cycle. 5. Introduce the product, processes, people and business model itself to digital technologies. 6. Develop long-term action plans with the domestic customer. These plans must be based on three premises: (i) the complete life cycle must be included, starting from the research and development stage throughout the ship’s disposal; (ii) customer demand has to be sophisticated, i.e. customer requirements, both from the efficiency and product perspective, "attract" the contractor and (iii) technological level and manufacturing capabilities of the company in the future must be maintained and a competitive position on the export market has to be achieved. 7. Promote the military exporting sector through increased international business. 8. Develop contractor multi-location as it entails an opportunity for growth and promote export opportunities providing integrated solutions in the customer's country. 9. Strengthen institutional diplomacy as a lever for export. 10. Promote technological leadership in both product and processes with active R & D & I policies (Research & Development & Innovation) 11. Strengthen financing capacity through innovative solutions. The second goal of this thesis is focused on developing integrated Through Life Support (TLS) solutions. The proposed methodology tries to minimize the gap between needs and capabilities through the ship operational life. It means, the main TLS program objective is to maintain the ship’s performance and capabilities during operational life, in relative terms to current technologies, equivalent to those the ship had when it entered service. The main actions to fulfill the TLS program objectives are: value-oriented design, TLS engineering, technology updating projects, intelligent maintenance and performance based contracts.

Modelo multidimensional de los factores que afectan la interacción entre marketing y ventas en el lanzamiento de nuevos productos en Latino América

Esta tesis se centra en la identificación y análisis de los factores que pueden favorecer o actuar como barreras del éxito de la implementación de la innovación y las relaciones entre sí, desde el enfoque de la interface marketing-ventas. El trabajo empírico se enmarca en el vacío de investigación existente en el campo del proceso de lanzamiento de nuevos productos en los mercados donde operan subsidiarias de empresas multinacionales de consumo masivo (FMCG). Las empresas FMCG son altamente dependientes de la innovación como proceso clave determinante del crecimiento competitivo de mediano y largo plazo. En un contexto de acortamiento del ciclo de vida de los productos, como resultado del desarrollo tecnológico y científico que impactan en el comportamiento de los consumidores, las empresas invierten un mayor nivel de recursos en el desarrollo de nuevos productos, reingeniería y programas de innovación (Mundra, Gulati y Gupta, 2013). Sin embargo, a pesar del aumento en la inversión, las tasas de éxito de la innovación reportadas son inferiores al 25% (Evanschitzky, Eisend, Calantone y Jiang, 2012). Aumentar las tasas de éxito de los proyectos de innovación es reconocida en la literatura como un elemento clave para la supervivencia y competitividad de las empresas, para ser superiores a su competencia y desarrollar nuevos modelos de negocios. A pesar de la existencia de estudios que intentan comprender el proceso de lanzamiento de nuevos productos, no se ha identificado un claro prototipo de gestión de la innovación (Gupta et al, 2007). Profundizando en los factores de éxito, los autores Keupp, Palmié y Gassman (2012) reconocen que la innovación exitosa no depende solamente de la estrategia de selección de los proyectos de innovación, sino también la forma en que los mismos son implementados (Klein and Sorra, 1996; Repenning, 2002; Keupp, Palmié y Gassmann, 2012). Al analizar la implementación de los proyectos de lanzamiento de nuevos productos al mercado, en empresas FMCG, dicho proceso es responsabilidad principalmente de las funciones de marketing y ventas a través de la comunicación con los consumidores y los clientes respectivamente (Ernst, Hoyer y Rubsaamen, 2010). Es decir que el éxito en la implementación de la innovación requiere la gestión efectiva de la relación inter-funcional entre marketing y ventas (Ernst, Hoyer y Rubsaamen, 2010; Hughes, Le Bon y Malshe, 2012). A pesar de la importancia de la integración entre marketing y ventas en la conceptualización e implementación de la innovación, este tema no ha sido estudiado en profundidad (Hughes, Le Bon y Malshe, 2012; Keupp, Palmié y Gassmann, 2012). En las empresas multinacionales, está demostrado que el desempeño de las subsidiarias determinan el éxito competitivo de la empresa a nivel global. El desafío de dichas subsidiarias es conjugar el desarrollo global de innovación y comunicación con las características locales de comportamiento del consumidor y el mercado. Por lo tanto, esta investigación empírica responde a la pregunta académica y de gestión acerca de cómo mejorar las tasas de éxito de lanzamiento de nuevos productos al mercado en subsidiarias de empresas de consumo masivo, desde la perspectiva de la relación entre marketing y ventas. En particular analiza cómo afectan la formalización de los procesos y los mecanismos de comunicación a la confianza interpersonal y a la efectividad de la interface marketing-ventas y dichos factores a su vez sobre la planificación integrada de la implementación de la innovación. La determinación de los factores o ítems que conforman cada uno de los constructos del proceso de ejecución de la innovación, se llevó a cabo a partir de una revisión exhaustiva del estado del arte de la literatura sobre las interfaces funcionales y el proceso de innovación. Posteriormente, los ítems seleccionados (más de 50 en total) fueron validados por referentes de marketing y ventas de Argentina y Uruguay a través de entrevistas en profundidad. A partir de los factores identificados se construyeron dos modelos teóricos: • (1) relativo a la influencia de las dimensiones de confianza interpersonal sobre la efectividad de las uniones inter-funcionales y como los mecanismos organizacionales, tales como la frecuencia y la calidad de la comunicación entre las áreas, afectan la confianza y la relación entre ellas; • (2) relativo a la dimensión planificación integrada de la implementación de la innovación, ya que durante el lanzamiento de nuevos productos al mercado, marketing y ventas utilizan procesos formales que facilitan la comunicación frecuente y efectiva, desarrollando confianza inter-personal que no solamente afecta la efectividad de su relación sino también el desarrollo de planes integrados entre ambas áreas. El estudio fue llevado a cabo en una empresa multinacional de consumo masivo que integra la lista Global 500 (Fortune, 2015), presente en todo el mundo con más de 25 marcas participantes en más de 15 categorías, implementando 150 proyectos de innovación en el último año. El grupo de subsidiarias en estudio fue reconocido a nivel mundial por su desempeño en crecimiento competitivo y su alta contribución al crecimiento total. El modelo analizado en esta tesis fue expandido al resto de América Latina, tratándose entonces de un caso ejemplar que representa una práctica de excelencia en la implementación de la innovación en subsidiarias de una empresa multinacional. La recolección de los datos fue llevado a cabo a través de un cuestionario estructurado y confidencial, enviado a la base de datos de todo el universo de directores y gerentes de marketing y ventas. El nivel de respuesta fue muy elevado (70%), logrando 152 casos válidos. El análisis de datos comprendió el análisis descriptivo de los mismos, estimación de fiabilidad y análisis factorial exploratorio a través del software SPSS v.20. El análisis factorial confirmatorio y el análisis de senderos para examinar las relaciones entre los factores se estudiaron mediante el software R (Package 2.15.1., R Core Team, 2012) (Fox, 2006). Finalmente se llevaron a cabo entrevistas en profundidad a gerentes de marketing y ventas de cada uno de los seis países con el fin de profundizar en los constructos y sus relaciones. Los resultados de los modelos demuestran que la frecuencia de comunicación impacta positivamente en la calidad de la misma, que a su vez afecta directamente la relación entre marketing y ventas. Adicionalmente, la calidad de la comunicación impacta sobre la confianza cognitiva, que a su vez se relaciona no solamente con la confianza afectiva sino también con la relación entre ambas áreas. Esto significa que para mejorar la implementación de la innovación, los gerentes deberían orientarse a reforzar la relación entre marketing y ventas facilitando la construcción de confianza interpersonal primero cognitiva y luego afectiva, incrementando la frecuencia de la comunicación que alimenta la calidad de la comunicación entre ambas áreas. A través del segundo modelo se demuestra que durante el lanzamiento de nuevos productos al mercado, marketing y ventas necesitan emplear procesos formales que faciliten la comunicación frecuente y efectiva. De esta forma se contrarresta el efecto negativo de la formalización sobre la planificación integrada entre ambas áreas. Adicionalmente, los gerentes de ambos departamentos deberían promover la construcción de confianza interpersonal, no solamente para mejorar la efectividad de la relación, sino también para desarrollar planes integrados de implementación de nuevos productos. Finalmente, se valida que la frecuencia de la comunicación, la confianza afectiva y la relación marketing-ventas, se relacionan positivamente con la planificación integrada en la implementación de la innovación. El estudio contribuye a la comprensión de los factores que las empresas pueden emplear para mejorar la relación inter-funcional entre marketing y ventas y la implementación de la innovación en empresas de consumo masivo. El aporte de esta investigación puede ser valorado de dos maneras, los aportes a la gestión y a la academia. Desde el punto de vista empresarial, provee a los líderes al frente de empresas de consumo masivo, del conocimiento sobre los factores que afectan la implementación de la innovación y en definitiva el éxito del negocio a mediano y largo plazo. Desde el punto de vista académico aporta al conocimiento del proceso de implementación de la innovación y en la efectividad de la interface marketing y ventas en un caso de buenas prácticas en el mercado de consumo masivo. A su vez incorpora por primera vez un estudio empírico en geografías emergentes capaces de recuperar el camino de crecimiento posterior a una profunda crisis económica a través de la exitosa implementación de la innovación en sus mercados. ABSTRACT This thesis is focused on the identification, analysis and relationship study of factors which may benefit or hinder the successful deployment of innovation, from a marketing-sales interface perspective. Considering the non-existent investigation dedicated to the study of new products launches into markets in which Fast Moving Consumer Goods (FMCG) companies’ subsidiaries operate, it is that this investigation has been carried out. FMCG companies rely on innovation as their key process for a competitive growth on a medium and long term basis. Nowadays, the life-cycle of products is getting shorter as a result of new technological and scientific development, having impact on consumer behavior, and therefore companies are forced to dedicating more resources to the development of new products, reengineering and innovation programs (Mundra, Gulati and Gupta, 2013). However, in spite of the investment increase, the innovation success rates have been reported to be lower than 25% (Evanschitzky, Eisend, Calantone y Jiang, 2012). Increasing success rates on innovation processes has been considered as a key element on the survival and competitiveness of companies, outperforming competitors and developing new business models. Despite new studies which try to comprehend the process of new products launch, a prototype of innovation management has not yet been identified (Gupta et al, 2007). Emphasizing on success factors, authors Keupp, Palmié and Gassman (2012) recognize that successful innovation does not solely depend on innovation processes’ selection strategy, but it is also based on the way in which these are implemented (Klein and Sorra, 1996; Repenning, 2002; Keupp, Palmié y Gassmann, 2012). While analyzing the implementation of projects for new products releases on massive consumption companies, the two departments in charge of taking this forward are marketing and sales, by focusing on communication strategies with consumers and clients respectively (Ernst, Hoyer y Rubsaamen, 2010). This means that having success on innovation implementation requires an effective management of inter-functional relationship among marketing and sales (Ernst, Hoyer y Rubsaamen, 2010; Hughes, Le Bon y Malshe, 2012). In spite of the importance on the integration between marketing and sales on the conceptualization and implementation of innovation, this subject has not been studied in depth (Hughes, Le Bon y Malshe, 2012; Keupp, Palmié y Gassmann, 2012). In multinational companies, previous research has confirmed that the performance of their subsidiaries determine the competitive success of the company on a global scale. The challenge of said subsidiaries is to conjugate the global innovation development and communication with the local consumer and market behavior. Therefore, this empirical study aims to respond to the academic and management question of how to improve the success rates of new product launches into MNE subsidiary’ markets, from a marketing-sales relationship perspective. Particularly, this investigation analyses how the formalization of products and communication mechanisms affect interpersonal trust and marketing-sales interface effectiveness and also on how these factors affect the overall planning of the implementation of innovation. The determination of which factors build the hypothesis of the innovation execution process was taken forward through an extensive research on the extant literature on functional interfaces and innovation processes. More than 50 items were selected which were in turn validated by marketing and sales referents on Uruguay and Argentina through in depth interviews. Based on the identified factors, two theoretical models were proposed: (1) Relative to the influence that interpersonal trust dimensions have on inter functional linkages effectiveness and how organizational mechanisms such as frequency and quality of communication between departments affect trust and their relationship. (2) Relative to the integrated planning and innovation implementation dimensions. Marketing and sales department use formal process thus allowing inter-personal trust, which affects positively their relationship and also enables the development of integrated planning between them. The study was performed within a massive consumption company which is part of the “Global 500” (Fortune, 2015), with subsidiaries all over the world and more than 25 participant brands in 15 categories, having implemented over 150 innovation projects in the year under study. The analyzed subsidiary group has been awarded worldwide for their performance in competitive growth and their high contribution to the total growth. The model being analyzed in this thesis was implemented throughout Latin America, representing a remarkable case of innovation implementation excellence for subsidiaries of multinational companies. Data recollection was carried out through a structured and confidential questionnaire, sent to the universe of marketing-sales directors and managers’ database available with a high level of responsiveness of 70%, resulting in 152 valid cases. Data exploration involved a descriptive analysis, followed by a reliability estimation and an exploratory factorial analysis carried out through SPSS v.20. Confirmatory factorial analysis and path analysis (to examine relations between the different study factors) were studied using “R” software (Package 2.15.1., R Core Team, 2012) (Fox, 2006). Finally, in depth interviews were carried out to several marketing and sales managers in each of the six countries so as to further confirm the hypothesis and their relations. The models results prove that communication frequency has a positive impact on the quality of the same, which in turn has direct effects on the marketing-sales relations. Additionally, communication quality has an impact on the cognitive trust, which also relates not only to affective trust, but also to the relation between both areas. This means that in order to improve the implementation of innovation, managers should strive to enforce marketing-sales relations, facilitating the interpersonal trust construction (firstly cognitive, followed by affective trust), increasing the communication frequency, and therefore nurturing the communication quality among both areas. Through the second model, the results confirm the importance of creating effective relationships between sales and marketing to facilitate planning integrated new product implementations. While formalized new product development processes provide opportunities for sales and marketing to communicate, this does not directly influence the planning of integrated new product implementations. By using these formal opportunities to communicate to create information quality, it is possible to improve sales and marketing’s ability to integrate information during the planning process. Further, communication quality creates inter-personal trust in the other party’s competences (cognitive-based trust), leading to affect-based trust. Affect-based inter-personal trust, not only to improve the overall effectiveness of the sales and marketing relationship, but also helps in planning integrated new product implementations. This study contributes to the understanding of factors which enterprises can use to improve the inter-functional relations between marketing and sales, and the implementation of innovation in FMCG companies. The contribution of this investigation can be measured in two ways: enrichment of management and contribution to the academic area. From a business perspective, it provides massive consumption businesses leaders with knowledge on which factors affect innovation implementation, which results on mid and long-term success for the company. From an academic point of view, it provides knowledge on a prototype of successful innovation implementation management based on the marketing-sales interface effectiveness through a case study in the FMCG consumption market. Last but not least, it incorporates for the first time an empiric study on emerging geographies capable of recovery post a deep economic crisis through successful innovation implementation on their markets.

Caracterización y análisis comparativo del comportamiento medioambiental de los materiales de aislamiento térmico utilizados en la envolvente del edificio, en función del sistema constructivo y de la situación geográfica

La construcción es uno de los causantes de mayor impacto ambiental y energético en el entorno. Por ello, los profesionales del sector deben empezar a cambiar la manera en la que diseñan la arquitectura, incorporando técnicas y parámetros sostenibles desde las primeras etapas del diseño, controlando la elección de los materiales y las soluciones constructivas. A través de las Declaraciones Ambientales de Producto (DAP) es posible conocer el perfil ambiental de los productos de la construcción, sin embargo, la mayoría de estos documentos solo poseen información de la etapa de producto (A1-A3) y de la etapa de fin de vida, contemplando solo un tipo de tratamiento (vertedero o incineración). Lo que propone esta investigación es generar información medioambiental del resto de las etapas del ciclo de vida relacionado con el producto, haciendo especial hincapié en la etapa de transporte (A4), puesta en obra (A5), transporte de obra a planta de tratamiento (C2) y etapa de fin de vida con vertedero e incineración. Para la realización de la investigación se ha generado un Inventario de Ciclo de Vida (ICV) con valores medios facilitados por las empresas. El ámbito de actuación es la península ibérica, considerándose un transporte en camión. La evaluación ambiental se ha realizado con la herramienta informática SimaPro (versión 7.3.3). Para los procesos que no han podido ser modelizados por falta de información, se ha recurrido a la base de datos Ecoinvent (versión 2.0). Las categorías de impacto analizadas son las contempladas en la UNE-EN ISO 15804+A1. Con esta investigación se propone una catalogación medioambiental del material de aislamiento térmico según los impactos asociados al transporte, puesta en obra y fin de vida del producto para que el prescriptor pueda escoger qué material es el más adecuado a incorporar en el proyecto, desde el punto de vista medioambiental. ABSTRACT _ Construction is one of the main causes of environmental and energy impacts in the environment. Therefore, the professionals of the sector should begin changing the way they design architecture, incorporating sustainable techniques and parameters from the first design stages, controlling the choice of materials and building solutions. It is possible to know the environmental profile of construction products through Environmental Product Declarations (EPD). However, most of these documents only provide information for the product stage (A1-A3) and the end-of-life stage, taking into account only one type of treatment (landfill or incineration). This research proposes the generation of environmental information for the rest of the life cycle stages related to the product, with particular emphasis on the transportstage (A4), construction installation (A5), transport from the construction site to the recycling facilities (C2) and end-of-life stage with landfill and incineration. A Life Cycle Inventory (LCI) has been generated for the development of the research, with mean values provided by the firms. The scope of action is the Iberian Peninsula, considering transport by lorry. The environmental assessment has been carried out with the SimaPro software (version 7.3.3). The Ecoinvent database (version 2.0) has been used for the processes that couldn’t be modelled due to lack of information. The impact categories analysed are those considered in standard UNE-EN ISO 15804+A1. This research proposes an environmental cataloguing of the thermal insulation material depending on the impacts associated with transport, construction installation and end-of-life of the product so that the prescriber might choose which material is the most suitable to implement in the project from an environmental point of view.

Bridging the gap between energy and the environment

Acknowledgements This work was supported by the UK Energy Research Centre Phase 2, under its Energy and Environment theme Grant Number NE/J005924/1 and NE/G007748/1. Open Access funded by Natural Environment Research Council

The Schizosaccharomyces pombe spo20+ Gene Encoding a Homologue of Saccharomyces cerevisiae Sec14 Plays an Important Role in Forespore Membrane Formation

The Schizosaccharomyces pombe spo20-KC104 mutation was originally isolated in a screen for sporulation-deficient mutants, and the spo20-KC104 mutant exhibits temperature-sensitive growth. Herein, we report that S. pombe, spo20+ is essential for fission yeast cell viability and is constitutively expressed throughout the life cycle. We also demonstrate that the spo20+ gene product is structurally homologous to Saccharomyces cerevisiae Sec14, the major phosphatidylinositol transfer protein of budding yeast. This structural homology translates to a significant degree of functional relatedness because reciprocal complementation experiments demonstrate that each protein is able to fulfill the essential function of the other. Moreover, biochemical experiments show that, like Sec14, Spo20 is a phosphatidylinositol/phosphatidylcholine-transfer protein. That Spo20 is required for Golgi secretory function in vegetative cells is indicated by our demonstration that the spo20-KC104 mutant accumulates aberrant Golgi cisternae at restrictive temperatures. However, a second phenotype observed in Spo20-deficient fission yeast is arrest of cell division before completion of cell separation. Consistent with a direct role for Spo20 in controlling cell septation in vegetatively growing cells, localization experiments reveal that Spo20 preferentially localizes to the cell poles and to sites of septation of fission yeast cells. We also report that, when fission yeasts are challenged with nitrogen starvation, Spo20 translocates to the nucleus. This nuclear localization persists during conjugation and meiosis. On completion of meiosis, Spo20 translocates to forespore membranes, and it is the assembly of forespore membranes that is abnormal in spo20-KC104 cells. In such mutants, a considerable fraction of forming prespores fail to encapsulate the haploid nucleus. Our results indicate that Spo20 regulates the formation of specialized membrane structures in addition to its recognized role in regulating Golgi secretory function.

Molecular cloning and sequence analysis of the complestatin biosynthetic gene cluster

Streptomyces lavendulae produces complestatin, a cyclic peptide natural product that antagonizes pharmacologically relevant protein–protein interactions including formation of the C4b,2b complex in the complement cascade and gp120-CD4 binding in the HIV life cycle. Complestatin, a member of the vancomycin group of natural products, consists of an α-ketoacyl hexapeptide backbone modified by oxidative phenolic couplings and halogenations. The entire complestatin biosynthetic and regulatory gene cluster spanning ca. 50 kb was cloned and sequenced. It consisted of 16 ORFs, encoding proteins homologous to nonribosomal peptide synthetases, cytochrome P450-related oxidases, ferredoxins, nonheme halogenases, four enzymes involved in 4-hydroxyphenylglycine (Hpg) biosynthesis, transcriptional regulators, and ABC transporters. The nonribosomal peptide synthetase consisted of a priming module, six extending modules, and a terminal thioesterase; their arrangement and domain content was entirely consistent with functions required for the biosynthesis of a heptapeptide or α-ketoacyl hexapeptide backbone. Two oxidase genes were proposed to be responsible for the construction of the unique aryl-ether-aryl-aryl linkage on the linear heptapeptide intermediate. Hpg, 3,5-dichloro-Hpg, and 3,5-dichloro-hydroxybenzoylformate are unusual building blocks that repesent five of the seven requisite monomers in the complestatin peptide. Heterologous expression and biochemical analysis of 4-hydroxyphenylglycine transaminon confirmed its role as an aminotransferase responsible for formation of all three precursors. The close similarity but functional divergence between complestatin and chloroeremomycin biosynthetic genes also presents a unique opportunity for the construction of hybrid vancomycin-type antibiotics.

Evidence from disruption of the lmcpb gene array of Leishmania mexicana that cysteine proteinases are virulence factors.

The mammalian form of the protozoan parasite Leishmania mexicana contains high activity of a cysteine proteinase (LmCPb) encoded on a tandem array of 19 genes (lmcpb). Homozygous null mutants for lmcpb have been produced by targeted gene disruption. All life-cycle stages of the mutant can be cultured in vitro, demonstrating that the gene is not essential for growth or differentiation of the parasite. However, the mutant exhibits a marked phenotype affecting virulence-- its infectivity to macrophages is reduced by 80%. The mutants are as efficient as wild-type parasites in invading macrophages but they only survive in a small proportion of the cells. However, those parasites that successfully infect these macrophages grow normally. Despite their reduced virulence, the mutants are still able to produce subcutaneous lesions in mice, albeit at a slower rate than wild-type parasites. The product of a single copy of lmcpb re-expressed in the null mutant was enzymatically active and restored infectivity toward macrophages to wild-type levels. Double null mutants created for lmcpb and lmcpa (another cathepsin L-like cysteine proteinase) have a similar phenotype to the lmcpb null mutant, showing that LmCPa does not compensate for the loss of LmCPb.

Contribuições ao processo de inserção das PMES no mercado de capitais brasileiro

O crescimento de uma empresa pode ser apoiado com recursos de terceiros provenientes do mercado de crédito ou do mercado de capitais. Credores ou potenciais investidores disponibilizam recursos a partir de um processo de avaliação de indicadores de performance. Para as PMEs que consideram o crescimento, conhecer como os indicadores relevantes se comportam ao longo de um ciclo de crescimento é uma questão estratégica. Fatores como tamanho, lucratividade, oportunidades de crescimento, composição de ativos das empresas, risco inerente aos resultados, têm sido vinculados a determinantes de uma estrutura de capital. Assim sendo, este trabalho busca verificar quais indicadores podem nortear o desempenho empresarial de PMEs ao longo de um ciclo de crescimento. Como contribuição original, este trabalho apresenta um painel com indicadores em diferentes estágios de crescimento que resultam na geração de valor para os proprietários e potenciais investidores do mercado de capitais. A amostra inicial é composta por 1.610 empresas para o período de 2010 a 2014. Entretanto, considerando a disponibilidade de informações, a amostra final é composta por 28 empresas de porte médio/grande, 387 empresas grandes e 138 empresas listadas na BM&FBOVESPA, totalizando 553 empresas. A metodologia adotada envolve a classificação de porte de empresa do BNDES como critério para definir ciclo de crescimento, e testes de estatística descritiva, análise fatorial, análise de correlação, regressão múltipla linear e montagem de painel. Como resultado, verificou-se que as variáveis tamanho, composição de ativos e lucratividade são fatores que explicam o endividamento de curto prazo para o estágio médias/grandes empresas. Ainda, que esses fatores explicam o endividamento de longo prazo para os estágios grandes e empresas listadas na BM&FBOVESPA. Tais resultados estão de acordo com estudos prévios, mas as variáveis relacionadas a volatilidade e crescimento não foram significantes nos modelos para os estágios de empresas. O painel montado a partir das variáveis de composição de ativos e lucratividade indicou que endividamento de curto prazo, endividamento de longo prazo, receita líquida, retorno sobre o patrimônio líquido e lucros antes de juros, impostos, depreciação e amortização (EBITDA) sinalizam empresas, em cada estágio de ciclo de crescimento do estudo, que buscam o crescimento com rentabilidade acima da média e atendem a critérios valorizados pelo investidor do mercado de capitais. Estes indicadores podem sinalizar o desempenho empresarial de PMEs ao longo de um ciclo de crescimento

Análise de metabólitos e proteínas totais em folhas de Eucalyptus grandis durante a infecção por Puccinia psidii

Os mecanismos moleculares envolvidos na resistência de plantas contra patógenos são um tema bastante discutido no meio acadêmico, sendo o objetivo maior dos estudos a diminuição das perdas de produtividade provocadas por doenças em plantações do mundo todo. Muitos modelos de interação patógeno-hospedeiro foram propostos e desenvolvidos priorizando plantas e culturas de rápido desenvolvimento com ciclo de vida curto. Espécies de ciclo longo, porém, devem lidar durante anos - ao menos até a idade reprodutiva - contra o ataque de bactérias, fungos e vírus, sem contar, nesse meio tempo, com recombinações genéticas e mutações que tornariam possível o escape contra as moléstias causadas por microrganismos. Assim, como alternativa aos modelos usuais, o presente trabalho estudou um diferente par de antagonistas: Eucalyptus grandis e Puccinia psidii. Apesar da contribuição de programas de melhoramento genético, o patossistema E. grandis X P. psidii ainda é pouco descrito no nível molecular, havendo poucos estudos sobre os processos e as moléculas que agem de forma a conferir resistência às plantas. Assim, buscando o melhor entendimento da relação entre E. grandis X P. psidii, o presente trabalho estudou a mudança dos perfis de proteínas e metabólitos secundários ocorrida nos tecidos foliares de plantas resistentes e susceptíveis durante a infecção pelo patógeno, com o auxílio da técnica de cromatografia líquida acoplada à espectrometria de massas. Os resultados obtidos indicam que as plantas resistentes percebem a presença do patógeno logo nas primeiras horas pós-infecção, produzindo proteínas ligadas à imunidade (HSP90, ILITYHIA, LRR Kinase, NB-ARC disease resistance protein). Essa percepção desencadeia a produção de proteínas de parede celular e de resposta oxidativa, além de modificar o metabolismo primário e secundário. As plantas susceptíveis, por outro lado, têm o metabolismo subvertido, produzindo proteínas responsáveis pelo afrouxamento da parede celular, beneficiando a absorção de nutrientes, crescimento e propagação de P. psidii. No trabalho também são propostos metabólitos biomarcadores de resistência, moléculas biomarcadoras de resposta imune e sinais da infecção por patógeno em E. grandis.

Building from building waste: The development of an instrument to determine the circularity of materials from the existing building stock in order to maximise high quality reuse

On a global level the population growth and increase of the middle class lead to a growing demand on material resources. The built environment has an enormous impact on this scarcity. In addition, a surplus of construction and demolition waste is a common problem. The construction industry claims to recycle 95% of this waste but this is in fact mainly downcycling. Towards the circular economy, the quality of reuse becomes of increasing importance. Buildings are material warehouses that can contribute to this high quality reuse. However, several aspects to achieve this are unknown and a need for more insight into the potential for high quality reuse of building materials exists. Therefore an instrument has been developed that determines the circularity of construction waste in order to maximise high quality reuse. The instrument is based on three principles: ‘product and material flows in the end of life phase’, ‘future value of secondary materials and products’ and ‘the success of repetition in a new life cycle’. These principles are further divided into a number of criteria to which values and weighting factors are assigned. A degree of circularity can then be determined as a percentage. A case study for a typical 70s building is carried out. For concrete, the circularity is increased from 25% to 50% by mapping out the potential for high quality reuse. During the development of the instrument it was clarified that some criteria are difficult to measure. Accurate and reliable data are limited and assumptions had to be made. To increase the reliability of the instrument, experts have reviewed the instrument several times. In the long-term, the instrument can be used as a tool for quantitative research to reduce the amount of construction and demolition waste and contribute to the reduction of raw material scarcity.

Offshoring of Information-intensive Services: Structural Breaks in Industry Life Cycles. ACES Working Papers, August 2010

The emergence of widespread offshoring of information-intensive services is arguably one of the more impactful phenomena to transform business in the last ten years. A growing body of research has examined the firm-level drivers andlocation factors (i.e., the why's and where's) of services offshoring. However, little empirical research has examined the maturation sequencing (or when's) of services offshoring. Adopting industry life cycle theory as a framework, the key research questions examined in the paper are: when do different categories of offshoring services provision change from being emergent sectors to more mature ones, and how does the timing of this sequence relate to the type of service offshored. Using a database of 1420 offshore services FDI projects, we find that the value-add as well as the information sensitivity of the service category are related to when the service categories progress through the industry life cycle. Implications for future waves of service offshoring are discussed.

The effect of life expectancy on fertility, saving, schooling and economic growth: theory and evidence

We construct a simple growth model where agents with uncertain survival choose schooling time, life-cycle consumption and the number of children. We show that rising longevity reduces fertility but raises saving, schooling time and the growth rate at a diminishing rate. Cross-section analyses using data from 76 countries support these propositions: life expectancy has a significant positive effect on the saving rate, secondary school enrollment and growth but a significant negative effect on fertility. Through sensitivity analyses, the effect on the saving rate is inconclusive, while the effects on the other variables are robust and consistent. These estimated effects are decreasing in life expectancy. Copyright The editors of the Scandinavian Journal of Economics 2005.

The Bali bombs and the tourism development cycle

This paper analyses the impact of the Bali bombings on international visitor arrivals in Bali and compares this crisis with previous crises with reference to Butler’s hypothetical tourism area life cycle. The paper demonstrates that the Bali bombings had by far the greatest impact on international tourism visitation than any other crisis in the island’s history. Such was the severity of the decline in Bali that both national and local measures were taken to restore confidence. Important though these measures were, they do not fully account for the strong resurgence in international arrivals, suggesting that the destination has not yet reached consolidation in accordance with Butler’s hypothesis and that the strength of the resurgence owes much to the underlying trend of the development phase associated with the general picture proposed by Butler.