Enabling aircraft emergency landings using active visual site detection

The ability to automate forced landings in an emergency such as engine failure is an essential ability to improve the safety of Unmanned Aerial Vehicles operating in General Aviation airspace. By using active vision to detect safe landing zones below the aircraft, the reliability and safety of such systems is vastly improved by gathering up-to-the-minute information about the ground environment. This paper presents the Site Detection System, a methodology utilising a downward facing camera to analyse the ground environment in both 2D and 3D, detect safe landing sites and characterise them according to size, shape, slope and nearby obstacles. A methodology is presented showing the fusion of landing site detection from 2D imagery with a coarse Digital Elevation Map and dense 3D reconstructions using INS-aided Structure-from-Motion to improve accuracy. Results are presented from an experimental flight showing the precision/recall of landing sites in comparison to a hand-classified ground truth, and improved performance with the integration of 3D analysis from visual Structure-from-Motion.

A novel T-DNA vector design for selection of transgenic lines with simple transgene integration and stable transgene expression

Plants transformed with Agrobacterium frequently contain T-DNA concatamers with direct-repeat (d/r) or inverted-repeat (i/r) transgene integrations, and these repetitive T-DNA insertions are often associated with transgene silencing. To facilitate the selection of transgenic lines with simple T-DNA insertions, we constructed a binary vector (pSIV) based on the principle of hairpin RNA (hpRNA)-induced gene silencing. The vector is designed so that any transformed cells that contain more than one insertion per locus should generate hpRNA against the selective marker gene, leading to its silencing. These cells should, therefore, be sensitive to the selective agent and less likely to regenerate. Results from Arabidopsis and tobacco transformation showed that pSIV gave considerably fewer transgenic lines with repetitive insertions than did a conventional T-DNA vector (pCON). Furthermore, the transgene was more stably expressed in the pSIV plants than in the pCON plants. Rescue of plant DNA flanking sequences from pSIV plants was significantly more frequent than from pCON plants, suggesting that pSIV is potentially useful for T-DNA tagging. Our results revealed a perfect correlation between the presence of tail-to-tail inverted repeats and transgene silencing, supporting the view that read-through hpRNA transcript derived from i/r T-DNA insertions is a primary inducer of transgene silencing in plants. © CSIRO 2005.

Assessing land-use and transport integration via a spatial composite indexing model

Achieving sustainable urban development is identified as one ultimate goal of many contemporary planning endeavours and has become central to formulation of urban planning policies. Within this concept, land-use and transport integration is highlighted as one of the most important and attainable policy objectives. In many cities, integration is embraced as an integral part of local development plans, and a number of key integration principles are identified. However, the lack of available evaluation methods to measure extent of urban sustainability levels prevents successful implementation of these principles. This paper introduces a new indicator-based spatial composite indexing model developed to measure sustainability performance of urban settings by taking into account land-use and transport integration principles. Model indicators are chosen via a thorough selection process in line with key principles of land-use and transport integration. These indicators are grouped into categories and themes according to their topical relevance. These indicators are then aggregated to form a spatial composite index to portray an overview of the sustainability performance of the pilot study area used for model demonstration. The study results revealed that the model is a practical instrument for evaluating success of local integration policies and visualizing sustainability performance of built environments and useful in both identifying problematic areas as well as formulating policy interventions.

In vitro assessment of surface congruency and integration of chondrocytes at adjacent edges of micro-fabricated clefts on cartilage

Osteochondral grafts are common treatment options for joint focal defects due to their excellent functionality. However, the difficulty is matching the topography of host and graft(s) surfaces flush to one another. Incongruence could lead to disintegration particularly when the gap reaches subchondoral region. The aim of this study is therefore to investigate cell response to gap geometry when forming cartilage-cartilage bridge at the interface. The question is what would be the characteristics of such a gap if the cells could bridge across to fuse the edges? To answer this, osteochondral plugs devoid of host cells were prepared through enzymatic decellularization and artificial clefts of different sizes were created on the cartilage surface using laser ablation. High density pellets of heterologous chondrocytes were seeded on the defects and cultured with chondrogenic differentiation media for 35 days. The results showed that the behavior of chondrocytes was a function of gap topography. Depending on the distance of the edges two types of responses were generated. Resident cells surrounding distant edges demonstrated superficial attachment to one side whereas clefts of 150 to 250 µm width experienced cell migration and anchorage across the interface. The infiltration of chondrocytes into the gaps provided extra space for their proliferation and laying matrix; as the result faster filling of the initial void space was observed. On the other hand, distant and fit edges created an incomplete healing response due to the limited ability of differentiated chondrocytes to migrate and incorporate within the interface. It seems that the initial condition of the defects and the curvature profile of the adjacent edges were the prime determinants of the quality of repair; however, further studies to reveal the underlying mechanisms of cells adapting to and modifying the new environment would be of particular interest.

Developing examplars for sustained integration of palliative care principles into allied health curricula

The PCC4U (Palliative Care Curriculum for Undergraduates) project aims to support the inclusion of the principles and practice of palliative care in all health professional training. While uptake rates of the project resources and curriculum initiatives is strong in medicine and nursing (86% of courses actively engaged with the project in 2012) integration of palliative care content in allied health disciplines has been less consistent. This report explores the process adopted to address this issue. In 2012 six allied health courses – representing social work, pharmacy, psychology, occupational therapy, dietetics and physiotherapy – commenced a range of tailored curriculum initiatives with the aim of informing the development of exemplars of integration of palliative care in specific disciplines. The PCC4U project provided palliative care learning materials, curriculum resources and expertise, and financial support as part of this curriculum development process. Review of the outcomes of each initiative indicates that tailored support has provided an opportunity for courses to develop palliative care curriculum content that reflects both discipline and local contexts. It has contributed six discipline specific exemplars of the integration of palliative care in allied health professional curricula and provided insights into allied health educational approaches in palliative care, particularly the use of evidence based resources. As a result project curriculum materials and activities have been expanded. These will be implemented with allied health courses through workshops, site visits and curriculum mapping initiatives in 2013 to better sustain the integration of palliative care in health professional curricula.

Physical activity and health-related quality of life among physiotherapists : a cross sectional survey in an Australian hospital and health service

Background Physiotherapists are a professional group with a high rate of attrition and at high risk of musculoskeletal disorders. The purpose of this investigation was to examine the physical activity levels and health-related quality of life of physiotherapists working in metropolitan clinical settings in an Australian hospital and health service. It was hypothesized that practicing physiotherapists would report excellent health-related quality of life and would already be physically active. Such a finding would add weight to a claim that general physical activity conditioning strategies may not be useful for preventing musculoskeletal disorders among active healthy physiotherapists, but rather, future investigations should focus on the development and evaluation of role specific conditioning strategies. Methods A questionnaire was completed by 44 physiotherapists from three inpatient units and three ambulatory clinics (63.7% response rate). Physical activity levels were reported using the Active Australia Survey. Health-related quality of life was examined using the EQ-5D instrument. Physical activity and EQ-5D data were examined using conventional descriptive statistics; with domain responses for the EQ-5D presented in a frequency histogram. Results The majority of physiotherapists in this sample were younger than 30 years of age (n = 25, 56.8%) consistent with the presence of a high attrition rate. Almost all respondents exceeded minimum recommended physical activity guidelines (n = 40, 90.9%). Overall the respondents engaged in more vigorous physical activity (median = 180 minutes) and walking (median = 135 minutes) than moderate exercise (median = 35 minutes) each week. Thirty-seven (84.1%) participants reported no pain or discomfort impacting their health-related quality of life, with most (n = 35,79.5%) being in full health. Conclusions Physical-conditioning based interventions for the prevention of musculoskeletal disorders among practicing physiotherapists may be better targeted to role or task specific conditioning rather than general physical conditioning among this physically active population. It is plausible that an inherent attrition of physiotherapists may occur among those not as active or healthy as therapists who cope with the physical demands of clinical practice. Extrapolation of findings from this study may be limited due to the sample characteristics. However, this investigation addressed the study objectives and has provided a foundation for larger scale longitudinal investigations in this field.

Transit Capacity and Quality of Service Manual (TCQSM) applications for education

Relevant Education Contexts, Examples of TCQSM Applicability to Undergraduate Disciplines, Why Teach with the TCQSM?, TCQS Teaching Tools, Theory Curriculum Example: Examination Question, Problem Based Learning Example: Senior Year Semester Team Project, Honors Dissertation Example Topics, Where to From Here?

How transit route passenger load and distance can together influence quality of service

This paper investigates: - correlation between transit route passenger loading and travel distance - its implications on quality of service (QoS) and resource productivity. It uses Automatic Fare Collection (AFC) data across a weekday on a premium bus line in Brisbane, Australia. A composite load-distance factor is proposed as a new measure for profiling transit route on-board passenger comfort QoS. Understanding these measures and their correlation is important for planning, design, and operational activities.

How transit route passenger load and distance can together influence quality of service

This paper investigates quality of service and resource productivity implications of transit route passenger loading and travel distance. Weekday Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate correlation between load factor and distance factor. Relationships between boardings and transit work indicate that distance factor generally increases with load factor. Time series analysis is then presented by examining each direction on an hour by hour basis. Inbound correlation is medium to strong across the entire span of service and strong for daytime services up to 19:30, while outbound correlation is strong across the entire span. Passengers tend to be making longer distance, peak direction commuter trips under the least comfortable conditions under stretched peak schedules than off-peak. Therefore productivity gains may be possible by adjusting fleet utilization during off-peak times. Weekday profiles by direction are established for a composite load-distance factor. A threshold corresponding to standing passengers on the Maximum Load Segment reveals that on-board loading and travel distance combined are more severe during the morning inbound peak than evening outbound peak, although the sharpness of the former suggests that encouraging shoulder peak travel during the morning would be more effective than evening peak. Further research suggested includes: consideration of travel duration factor, relating noise within hour to Peak Hour Factor, profiling load-distance factor across a range of case studies, and relating load-distance factor threshold to line length.

Learning processes in creative service teams : towards a dynamic systems theory

The fastest-growing segment of jobs in the creative sector are in those firms that provide creative services to other sectors (Hearn, Goldsmith, Bridgstock, Rodgers 2014, this volume; Cunningham 2014, this volume). There are also a large number of Creative Services (Architecture and Design, Advertising and Marketing, Software and Digital Content occupations) workers embedded in organizations in other industry sectors (Cunningham and Higgs 2009). Ben Goldsmith (2014, this volume) shows, for example, that the Financial Services sector is the largest employer of digital creative talent in Australia. But why should this be? We argue it is because ‘knowledge-based intangibles are increasingly the source of value creation and hence of sustainable competitive advantage (Mudambi 2008, 186). This value creation occurs primarily at the research and development (R and D) and the marketing ends of the supply chain. Both of these areas require strong creative capabilities in order to design for, and to persuade, consumers. It is no surprise that Jess Rodgers (2014, this volume), in a study of Australia’s Manufacturing sector, found designers and advertising and marketing occupations to be the most numerous creative occupations. Greg Hearn and Ruth Bridgstock (2013, forthcoming) suggest ‘the creative heart of the creative economy […] is the social and organisational routines that manage the generation of cultural novelty, both tacit and codified, internal and external, and [cultural novelty’s] combination with other knowledges […] produce and capture value’. 2 Moreover, the main “social and organisational routine” is usually a team (for example, Grabher 2002; 2004).

Prevalence of health behaviours in pregnancy at service entry in a Queensland health service district

Objective: Limited prevalence data for unhealthy pregnancy health behaviours make it difficult to prioritise primary prevention efforts for maternal and infant health. This study's objective was to establish the prevalence of cigarette smoking, sufficient fruit and vegetable intake and sufficient physical activity among women accessing antenatal clinics in a Queensland (Australia) health service district. Method: Cross-sectional self-reported smoking status, daily fruit and vegetable intake, weekly physical activity and a range of socio-demographic variables were obtained from women recruited at their initial antenatal clinic visit, over a three-month recruitment phase during 2007. Results: Analyses were based on 262 pregnant women. The study sample was broadly representative of women giving birth in the district and state, with higher representation of women with low levels of education and high income. More than one quarter of women were smoking. Few women met the guidelines for sufficient fruit (9.2%), vegetables (2.7%) or physical activity (32.8%) during pregnancy. Conclusions: There were low levels of adherence to health behaviour recommendations for pregnancy in this sample. Implications: There is a clear need to develop and evaluate effective pregnancy behaviour interventions to improve primary prevention in maternal and infant health. Brief minimal contact interventions that can be delivered through primary care to create a greater primary prevention focus for maternal and infant health would be worth exploring.

Innate and adaptive immunity at mucosal surfaces of the female reproductive tract : stratification and integration of immune protection against the transmission of sexually transmitted infections

This review examines the multiple levels of pre-existing immunity in the upper and lower female reproductive tract. In addition, we highlight the need for further research of innate and adaptive immune protection of mucosal surfaces in the female reproductive tract. Innate mechanisms include the mucus lining, a tight epithelial barrier and the secretion of antimicrobial peptides and cytokines by epithelial and innate immune cells. Stimulation of the innate immune system also serves to bridge the adaptive arm resulting in the generation of pathogen-specific humoral and cell-mediated immunity. Less understood are the multiple components that act in a coordinated way to provide a network of ongoing protection. Innate and adaptive immunity in the human female reproductive tract are influenced by the stage of menstrual cycle and are directly regulated by the sex steroid hormones, progesterone and estradiol. Furthermore, the effect of hormones on immunity is mediated both directly on immune and epithelial cells and indirectly by stimulating growth factor secretion from stromal cells. The goal of this review is to focus on the diverse aspects of the innate and adaptive immune systems that contribute to a unique network of protection throughout the female reproductive tract.

Academic legal research and academic research capacity enhancement working topic : "purposes and objectives of law schools beyond educating students (research, capacity building,community service and outreach)"

One of the main objectives of law schools beyond educating students is to produce viable legal research. The comments in this paper are basically confined to the Australian context, and to examine this topic effectively, it is necessary to briefly review the current tertiary research agenda in Australia. This paper argues that there is a need for recognition and support for an expanded legal research framework along with additional research training for legal academics. There also needs to be more effective methods of measuring and recognising quality in legal research. This method needs to be one that can engender respect in an interdisciplinary context.

Technological tools for science classrooms : choosing and using for productive and sustainable teaching and learning experiences

In this age of rapidly evolving technology, teachers are encouraged to adopt ICTs by government, syllabus, school management, and parents. Indeed, it is an expectation that teachers will incorporate technologies into their classroom teaching practices to enhance the learning experiences and outcomes of their students. In particular, regarding the science classroom, a subject that traditionally incorporates hands-on experiments and practicals, the integration of modern technologies should be a major feature. Although myriad studies report on technologies that enhance students’ learning outcomes in science, there is a dearth of literature on how teachers go about selecting technologies for use in the science classroom. Teachers can feel ill prepared to assess the range of available choices and might feel pressured and somewhat overwhelmed by the avalanche of new developments thrust before them in marketing literature and teaching journals. The consequences of making bad decisions are costly in terms of money, time and teacher confidence. Additionally, no research to date has identified what technologies science teachers use on a regular basis, and whether some purchased technologies have proven to be too problematic, preventing their sustained use and possible wider adoption. The primary aim of this study was to provide research-based guidance to teachers to aid their decision-making in choosing technologies for the science classroom. The study unfolded in several phases. The first phase of the project involved survey and interview data from teachers in relation to the technologies they currently use in their science classrooms and the frequency of their use. These data were coded and analysed using Grounded Theory of Corbin and Strauss, and resulted in the development of a PETTaL model that captured the salient factors of the data. This model incorporated usability theory from the Human Computer Interaction literature, and education theory and models such as Mishra and Koehler’s (2006) TPACK model, where the grounded data indicated these issues. The PETTaL model identifies Power (school management, syllabus etc.), Environment (classroom / learning setting), Teacher (personal characteristics, experience, epistemology), Technology (usability, versatility etc.,) and Learners (academic ability, diversity, behaviour etc.,) as fields that can impact the use of technology in science classrooms. The PETTaL model was used to create a Predictive Evaluation Tool (PET): a tool designed to assist teachers in choosing technologies, particularly for science teaching and learning. The evolution of the PET was cyclical (employing agile development methodology), involving repeated testing with in-service and pre-service teachers at each iteration, and incorporating their comments i ii in subsequent versions. Once no new suggestions were forthcoming, the PET was tested with eight in-service teachers, and the results showed that the PET outcomes obtained by (experienced) teachers concurred with their instinctive evaluations. They felt the PET would be a valuable tool when considering new technology, and it would be particularly useful as a means of communicating perceived value between colleagues and between budget holders and requestors during the acquisition process. It is hoped that the PET could make the tacit knowledge acquired by experienced teachers about technology use in classrooms explicit to novice teachers. Additionally, the PET could be used as a research tool to discover a teachers’ professional development needs. Therefore, the outcomes of this study can aid a teacher in the process of selecting educationally productive and sustainable new technology for their science classrooms. This study has produced an instrument for assisting teachers in the decision-making process associated with the use of new technologies for the science classroom. The instrument is generic in that it can be applied to all subject areas. Further, this study has produced a powerful model that extends the TPACK model, which is currently extensively employed to assess teachers’ use of technology in the classroom. The PETTaL model grounded in data from this study, responds to the calls in the literature for TPACK’s further development. As a theoretical model, PETTaL has the potential to serve as a framework for the development of a teacher’s reflective practice (either self evaluation or critical evaluation of observed teaching practices). Additionally, PETTaL has the potential for aiding the formulation of a teacher’s personal professional development plan. It will be the basis for further studies in this field.