Sequestering of Fe and Pb ions from Wastewater by Canarium schweinfurthii after carbonization and chemical treatment: Isothermal and Kinetic Modeling

In this paper agricultural waste; Canarium schweinfurthii was explored for the sequestering of Fe and Pb ions from wastewater solution after carbonization and chemical treatment at 400oC. Optimum time of 30 and 150 min with percentage removal of 95 and 98% at optimum pH of 2 and 6 was obtained for Fe and Pb ions. Kinetics model followed pseudofirst order as sum of absolute error (EABS) between Qe and Qc greater than that of pseudo second order. Parameters evaluated from isothermal equation (Freundlich and Langmuir) showed that KL and QO for Fe > Pb and R2 for Langmuir> Freundlich. The study reveals the suitability of the adsorbent for sequestering of Fe and Pb ions from industrial wastewater.

Structural and Biochemical Characterization of Peroxiredoxin Q beta from Xylella fastidiosa CATALYTIC MECHANISM and HIGH REACTIVITY

The phytopathogenic bacterium Xylella fastidiosa is the etiological agent of various plant diseases. To survive under oxidative stress imposed by the host, microorganisms express antioxidant proteins, including cysteine-based peroxidases named peroxiredoxins. This work is a comprehensive analysis of the catalysis performed by PrxQ from X. fastidiosa (XfPrxQ) that belongs to a peroxiredoxin class still poorly characterized and previously considered as moderately reactive toward hydroperoxides. Contrary to these assumptions, our competitive kinetics studies have shown that the second-order rate constants of the peroxidase reactions of XfPrxQ with hydrogen peroxide and peroxynitrite are in the order of 107 and 106 M(-1) s(-1), respectively, which are as fast as the most efficient peroxidases. The XfPrxQ disulfides were only slightly reducible by dithiothreitol; therefore, the identification of a thioredoxin system as the probable biological reductant of XfPrxQ was a relevant finding. We also showed by site-specific mutagenesis and mass spectrometry that an intramolecular disulfide bond between Cys-47 and Cys-83 is generated during the catalytic cycle. Furthermore, we elucidated the crystal structure of XfPrxQ C47S in which Ser-47 and Cys-83 lie similar to 12.3 angstrom apart. Therefore, significant conformational changes are required for disulfide bond formation. In fact, circular dichroism data indicated that there was a significant redox-dependent unfolding of alpha-helices, which is probably triggered by the peroxidatic cysteine oxidation. Finally, we proposed a model that takes data from this work as well data as from the literature into account.

Phase transitions in gene networks evolved under different selection rules

Mathematical models of gene regulation are a powerful tool for understanding the complex features of genetic control. While various modeling efforts have been successful at explaining gene expression dynamics, much less is known about how evolution shapes the structure of these networks. An important feature of gene regulatory networks is their stability in response to environmental perturbations. Regulatory systems are thought to have evolved to exist near the transition between stability and instability, in order to have the required stability to environmental fluctuations while also being able to achieve a wide variety of functions (corresponding to different dynamical patterns). We study a simplified model of gene network evolution in which links are added via different selection rules. These growth models are inspired by recent work on `explosive' percolation which shows that when network links are added through competitive rather than random processes, the connectivity phase transition can be significantly delayed, and when it is reached, it appears to be first order (discontinuous, e.g., going from no failure at all to large expected failure) instead of second order (continuous, e.g., going from no failure at all to very small expected failure). We find that by modifying the traditional framework for networks grown via competitive link addition to capture how gene networks evolve to avoid damage propagation, we also see significant delays in the transition that depend on the selection rules, but the transitions always appear continuous rather than `explosive'.

Biosorción en tanque agitado de Cd(+2) y Pb(+2) con cáscara de cacao

En la búsqueda de tecnologías más limpias para el tratamiento de efluentes que contienen metales pesados se ha dirigido la atención hacia la biosorción. Este estudio permitió abordar el proceso de biosorción de 〖Cd〗^(+2)y 〖Pb〗^(+2) en efluentes mineros a través de la cáscara de cacao. Se determinó las características físico-químicas del biosorbente y el resultado obtenido fue: la cáscara de cacao tiene una superficie neutra, compuesta principalmente por grupos ésteres alifáticos; además se estudió los factores que afectan este proceso como son: pH, tamaño de partícula, tiempo de contacto, Temperatura, y la concentración inicial del metal. El pH óptimo para la biosorción de plomo es entre 4 y 5 y para el cadmio fue entre 5 y 6; con respecto al tiempo de contacto necesario para eliminar la mayor cantidad de iones metálicos fue de 10 minutos, siendo el resultado obtenido en la remoción tanto de cadmio como de plomo de 86,92% y 96,74% respectivamente. Se observó que la temperatura no afecta significativamente el proceso de biosorción como el pH y se determinó como óptima 25℃ ; también se analizó que la cáscara de cacao tiene mayor afinidad por el cadmio por tener un radio iónico más pequeño que el plomo permitiéndole alcanzar poros reducidos; además al aumentar la concentración, la eliminación de cadmio disminuyó y para el plomo aumentó pero no de forma significativa. Los datos experimentales de la biosorción de plomo y cadmio en cáscara de cacao, reproducen favorablemente el modelo cinético Pseudo Segundo Orden, con coeficientes de correlación (R^2) para 〖Pb〗^(+2) de 0,999 y 〖Cd〗^(+2) de 1. Finalmente en el estudio de equilibrio el modelo de Langmuir describe el proceso de adsorción para 〖Cd〗^(+2) y el modelo de Fleundlich se ajustó mejor a los datos experimentales para 〖Pb〗^(+2).

Rejeito de xisto como adsorvente para remoção de fenol em águas produzidas na indústria de petróleo

Produced water is the main effluent linked to the activity of extraction of oil and their caring management is necessary due to the large volume involved, to ensure to minimize the negative impacts of discharges of these waters in the environment. This study aimed to analyze the use of retorted shale, which is a reject from the pyrolysis of pirobituminous shale, as adsorbent for the removal of phenols in produced water. The material was characterized by different techniques (grain sized analysis, thermal analysis, BET, FRX, FT-IR, XRD and SEM), showing the heterogeneity in their composition, showing its potential for the removal of varied compounds, as well as the phenols and their derivatives. For the analysis of the efficiency of the oil shale for the adsorption process, assays of adsorption balance were carried through, and also kinetic studies and dynamics adsorption, in the ETE of the UTPF of Petrobras, in Guamaré-RN. The balance assays shown a bigger conformity with the model of Langmuir and the kinetic model more adjusted to describe the adsorption of phenols in retorted shale was of pseudo-second order. The retorted shale presented a low capacity of adsorption of phenols (1,3mg/g), when related to others conventional adsorbents, however it is enough to the removal of these composites in concentrations presented in the produced water of the UTPF of Guamaré. The assays of dynamics adsorption in field had shown that the concentration of phenol in the effluent was null until reaching its rupture (58 hours). The results showed the possibility of use of the reject for removal of phenols in the final operations of the treatment process, removing as well, satisfactorily, the color and turbidity of the produced water, with more than 90% of removal

Estudo comparativo do desempenho de controladores robustos aplicados a um sistema de tanques acoplados.

Currently the uncertain system has attracted much academic community from the standpoint of scientific research and also practical applications. A series of mathematical approaches emerge in order to troubleshoot the uncertainties of real physical systems. In this context, the work presented here focuses on the application of control theory in a nonlinear dynamical system with parametric variations in order and robustness. We used as the practical application of this work, a system of tanks Quanser associates, in a configuration, whose mathematical model is represented by a second order system with input and output (SISO). The control system is performed by PID controllers, designed by various techniques, aiming to achieve robust performance and stability when subjected to parameter variations. Other controllers are designed with the intention of comparing the performance and robust stability of such systems. The results are obtained and compared from simulations in Matlab-simulink.

DYNAMIC MODEL BASED STATE ESTIMATION IN A HEAVY DUTY DIESEL AFTERTREATMENT SYSTEM FOR ONBOARD DIAGNOSTICS AND CONTROLS

Estimating un-measurable states is an important component for onboard diagnostics (OBD) and control strategy development in diesel exhaust aftertreatment systems. This research focuses on the development of an Extended Kalman Filter (EKF) based state estimator for two of the main components in a diesel engine aftertreatment system: the Diesel Oxidation Catalyst (DOC) and the Selective Catalytic Reduction (SCR) catalyst. One of the key areas of interest is the performance of these estimators when the catalyzed particulate filter (CPF) is being actively regenerated. In this study, model reduction techniques were developed and used to develop reduced order models from the 1D models used to simulate the DOC and SCR. As a result of order reduction, the number of states in the estimator is reduced from 12 to 1 per element for the DOC and 12 to 2 per element for the SCR. The reduced order models were simulated on the experimental data and compared to the high fidelity model and the experimental data. The results show that the effect of eliminating the heat transfer and mass transfer coefficients are not significant on the performance of the reduced order models. This is shown by an insignificant change in the kinetic parameters between the reduced order and 1D model for simulating the experimental data. An EKF based estimator to estimate the internal states of the DOC and SCR was developed. The DOC and SCR estimators were simulated on the experimental data to show that the estimator provides improved estimation of states compared to a reduced order model. The results showed that using the temperature measurement at the DOC outlet improved the estimates of the CO , NO , NO2 and HC concentrations from the DOC. The SCR estimator was used to evaluate the effect of NH3 and NOX sensors on state estimation quality. Three sensor combinations of NOX sensor only, NH3 sensor only and both NOX and NH3 sensors were evaluated. The NOX only configuration had the worst performance, the NH3 sensor only configuration was in the middle and both the NOX and NH3 sensor combination provided the best performance.

Selection and Passage of County Land Preservation Voter Referendum: The Role of Government

County jurisdictions in America are increasingly exercising self-government in the provision of public community services through the context of second order federalism. In states exercising this form of contemporary governance, county governments with “reformed” policy-making structures and professional management practices, have begun to rival or surpass municipalities in the delivery of local services with regional implications such as environmental protection (Benton 2002, 2003; Marando and Reeves, 1993). The voter referendum, a form of direct democracy, is an important component of county land preservation and environmental protection governmental policies. The recent growth and success of land preservation voter referendums nationwide reflects an increase in citizen participation in government and their desire to protect vacant land and its natural environment from threats of over-development, urbanization and sprawl, loss of open space and farmland, deterioration of ecosystems, and inadequate park and recreational amenities. The study’s design employs a sequential, mixed method. First, a quantitative approach employs the Heckman two-step model. It is fitted with variables for the non-random sample of 227 voter referendum counties and all non-voter referendum counties in the U.S. from 1988 to 2009. Second, the qualitative data collected from the in-depth investigation of three South Florida county case studies with twelve public administrator interviews is transformed for integration with the quantitative findings. The purpose of the qualitative method is to complement, explain and enrich the statistical analysis of county demographic, socio-economic, terrain, regional, governance and government, political preference, environmentalism, and referendum-specific factors. The research finds that government factors are significant in terms of the success of land preservation voter referendums; more specifically, the presence of self-government authority (home rule charter), a reformed structure (county administrator/manager or elected executive), and environmental interest groups. In addition, this study concludes that successful counties are often located coastal, exhibit population and housing growth, and have older and more educated citizens who vote democratic in presidential elections. The analysis of case study documents and public administrator interviews finds that pragmatic considerations of timing, local politics and networking of regional stakeholders are also important features of success. Further research is suggested utilizing additional public participation, local government and public administration factors.

Critical behavior of the three-dimensional Ising spin glass

We have simulated, using parallel tempering, the three-dimensional Ising spin glass model with binary couplings in a helicoidal geometry. The largest lattice (L520) has been studied using a dedicated computer (the SUE machine). We have obtained, measuring the correlation length in the critical region, strong evidence for a second-order finite-temperature phase transition, ruling out other possible scenarios like a KosterlitzThouless phase transition. Precise values for the ν and ƞ critical exponents are also presented.

The hierarchic structure of fears: A cross-cultural replication with the fear survey schedule in a portuguese sample

A confirmatory attempt is made to assess the validity of a hierarchic structural model of fears. Using a sample comprising 1,980 adult volunteers in Portugal, the present study set out to delineate the multidimensional structure and hierarchic organization of a large set of feared stimuli by contrasting a higher-order model comprising general fear at the highest level against a first-order model and a unitary fear model. Following a refinement of the original model, support was found for a five-factor model on a first-order level, namely (1) Social fears, (2) Agoraphobic fears, (3) Fears of bodily injury, death and illness, (4) Fears of display to aggressive scenes, and (5) Harmless animals fears. These factors in turn loaded on a General fear factor at the second-order level. However, the firstorder model was as parsimonious as a hierarchic higher-order model. The hierarchic model supports a quantitative hierarchic approach which decomposes fear disorders into agoraphobic, social, and specific (animal and bloodinjury) fears.

Kinetic analysis of metal uptake by dry and gel alginate particles

The kinetics of metal uptake by gel and dry calcium alginate beads was analysed using solutions of copper or lead ions. Gel beads sorbed metal ions faster than the dry ones and larger diffusivities of metal ions were calculated for gel beads: approximately 10−4 cm2/min vs. 10−6 cm2/min for dry beads. In accordance, scanning electron microscopy and nitrogen adsorption data revealed a low porosity of dry alginate particles. However, dry beads showed higher sorption capacities and a mechanical stability more suitable for large-scale use. Two sorption models were fitted to the kinetic results: the Lagergren pseudo-first order and the Ho and McKay pseudo-second order equations. The former was found to be the most adequate to model metal uptake by dry alginate beads and kinetic constants in the orders of 10−3 and 10−2 min−1 were obtained for lead solutions with concentrations up to 100 g/m3. The pseudo-first order model was also found to be valid to describe biosorbent operation with a real wastewater indicating that it can be used to design processes of metal sorption with alginate-based materials.

Credit spreads and monetary policy in a small open economy: an analysis of the colombian economy

This paper estimates Bejarano and Charry (2014)’s small open economy with financial frictions model for the Colombian economy using Bayesian estimation techniques. Additionally, I compute the welfare gains of implementing an optimal response to credit spreads into an augmented Taylor rule. The main result is that a reaction to credit spreads does not imply significant welfare gains unless the economic disturbances increases its volatility, like the disruption implied by a financial crisis. Otherwise its impact over the macroeconomic variables is null.

Offshore Wind Energy Conversion System Connected to the Electric Grid: Modeling and Simulation

This paper is on modeling and simulation for an offshore wind system equipped with a semi-submersible floating platform, a wind turbine, a permanent magnet synchronous generator, a multiple point clamped four level or five level full-power converter, a submarine cable and a second order filter. The drive train is modeled by three mass model considering the resistant stiffness torque, structure and tower in deep water due to the moving surface elevation. The system control uses PWM by space vector modulation associated with sliding mode and proportional integral controllers. The electric energy is injected into the electric grid either by an alternated current link or by a direct current link. The model is intend to be a useful tool for unveil the behavior and performance of the offshore wind system, especially for the multiple point clamped full-power converter, under normal operation or under malfunctions.

A staggered approach for the coupling of Cahn–Hilliard type diffusion and finite strain elasticity

We develop an algorithm and computational implementation for simulation of problems that combine Cahn–Hilliard type diffusion with finite strain elasticity. We have in mind applications such as the electro-chemo- mechanics of lithium ion (Li-ion) batteries. We concentrate on basic computational aspects. A staggered algorithm is pro- posed for the coupled multi-field model. For the diffusion problem, the fourth order differential equation is replaced by a system of second order equations to deal with the issue of the regularity required for the approximation spaces. Low order finite elements are used for discretization in space of the involved fields (displacement, concentration, nonlocal concentration). Three (both 2D and 3D) extensively worked numerical examples show the capabilities of our approach for the representation of (i) phase separation, (ii) the effect of concentration in deformation and stress, (iii) the effect of Electronic supplementary material The online version of this article (doi:10.1007/s00466-015-1235-1) contains supplementary material, which is available to authorized users. B P. Areias pmaa@uevora.pt 1 Department of Physics, University of Évora, Colégio Luís António Verney, Rua Romão Ramalho, 59, 7002-554 Évora, Portugal 2 ICIST, Lisbon, Portugal 3 School of Engineering, Universidad de Cuenca, Av. 12 de Abril s/n. 01-01-168, Cuenca, Ecuador 4 Institute of Structural Mechanics, Bauhaus-University Weimar, Marienstraße 15, 99423 Weimar, Germany strain in concentration, and (iv) lithiation. We analyze con- vergence with respect to spatial and time discretization and found that very good results are achievable using both a stag- gered scheme and approximated strain interpolation.

Customer Loyalty toward grocery retailing service: a multidimensional approach to costumer perceived value

Structured abstract Purpose: To deepen, in grocery retail context, the roles of consumer perceived value and consumer satisfaction, as antecedents’ dimensions of customer loyalty intentions. Design/Methodology/approach: Also employing a short version (12-items) of the original 19-item PERVAL scale of Sweeney & Soutar (2001), a structural equation modeling approach was applied to investigate statistical properties of the indirect influence on loyalty of a reflective second order customer perceived value model. The performance of three alternative estimation methods was compared through bootstrapping techniques. Findings: Results provided i) support for the use of the short form of the PERVAL scale in measuring consumer perceived value; ii) the influence of the four highly correlated independent latent predictors on satisfaction was well summarized by a higher-order reflective specification of consumer perceived value; iii) emotional and functional dimensions were determinants for the relationship with the retailer; iv) parameter’s bias with the three methods of estimation was only significant for bootstrap small sample sizes. Research limitations:/implications: Future research is needed to explore the use of the short form of the PERVAL scale in more homogeneous groups of consumers. Originality/value: Firstly, to indirectly explain customer loyalty mediated by customer satisfaction it was adopted a recent short form of PERVAL scale and a second order reflective conceptualization of value. Secondly, three alternative estimation methods were used and compared through bootstrapping and simulation procedures.