996 resultados para process description
Resumo:
O presente relatório foca-se na descrição do estágio realizado no Gabinete de Relações Internacionais na Universidad CEU San Pablo em Madrid no âmbito do mestrado em Empreendedorismo e Internacionalização. A primeira parte do relatório visa uma análise geral do Processo de Bolonha, dando especial atenção ao programa Erasmus. Depois disto, consta a descrição das tarefas realizadas durante o estágio internacional. Por último, irá encontrar-se a apreciação final deste trabalho e do estágio.
Resumo:
Based on the report for “Project IV” unit of the PhD programme on Technology Assessment (Doctoral Conference) at Universidade Nova de Lisboa (December 2011). This thesis research has the supervision of António Moniz (FCT-UNL and ITAS-KIT) and Michael Decker (Karlsruhe Institute of Technology-ITAS). Other members of the thesis committee are Carlos Alberto da Silva (University of Évora), José Maria de Albuquerque (Institute of Welding and Quality), Lotte Steuten (University of Twente), Mário Forjaz Secca (FCT-UNL) and Nelson Chibeles Martins (FCT-UNL).
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial
Resumo:
Dissertação para obtenção do Grau de Mestre em Biotecnologia
Resumo:
A presente dissertação foi realizada no âmbito do Mestrado de Engenharia e Gestão Industrial da Escola Superior de Estudos Industriais e de Gestão, de Vila do Conde. O projeto desenvolvido tem como tema principal a Otimização de processos de Logística in-house baseado num projeto, em contexto empresarial da empresa cliente, Continental Mabor S.A., da Rangel Distribuição e Logística, S.A. Este projeto tem como objetivo a “aglomeração” de dois armazéns do cliente, devido à necessidade de ocupação do armazém de produto acabado interno, para aumento da área de produção. Inicialmente foi feita uma revisão de literatura sobre os temas mais relevantes de suporte para o projeto, nomeadamente na otimização e melhoria contínua. Seguidamente é apresentado o Grupo Rangel, bem como a Rangel Distribuição e Logística, S.A., onde se enquadra o projeto e para se perceber o enquadramento e objetivo. A metodologia usada, caso de estudo, permitiu a aplicação de conceitos e ferramentas usados na literatura neste contexto, como ferramentas de otimização e melhoria continua como as melhores práticas de Kaizen-Lean. Na fase de diagnóstico do atual sistema, foi realizado um mapeamento de fluxo de processos e uma descrição detalhada do layout dos dois armazéns: Armazém de Produto Acabado (APA) e Armazém de Produto Acabado Externo (APAE), bem como todos os recursos, quer técnicos quer humanos necessários. Verificamos ao longo deste projeto várias limitações, inclusive limitações impostas pelo cliente, tal como não aprovar um estudo para um novo layout do armazém. Foi aprovado apenas a replicação do já existente. Com isto, depararam-se constrangimentos na gestão deste projeto. Os custos aumentaram significativamente, embora estes não sejam apresentados por questões de confidencialidade, principalmente com a necessidade de aquisição de novos equipamentos retráteis, e mais baterias para os mesmos, devido às grandes distâncias que irão ser percorridas. Finalmente foi projetado o sistema futuro, de acordo com as necessidades reais do cliente tendo em consideração a otimização de recursos e uma gestão magra (Lean Management). Foi desenvolvida a implementação da metodologia “Kaizen diário”, a dar início em 2016 juntamente com o novo projeto APAE. Com esta projeção foram identificados problemas e implicações no projeto, bem como possíveis melhorias.
Resumo:
Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.
Resumo:
A necessidade de utilizar métodos de ligação entre componentes de forma mais rápida, eficaz e com melhores resultados tem causado a crescente utilização das juntas adesivas, em detrimento dos métodos tradicionais de ligação. A utilização das juntas adesivas tem vindo a aumentar em diversas aplicações industriais por estas apresentarem vantagens, das quais se destacam a redução de peso, redução de concentrações de tensões e facilidade de fabrico. No entanto, uma das limitações das juntas adesivas é a dificuldade em prever a resistência da junta após fabrico e durante a sua vida útil devido à presença de defeitos no adesivo. Os defeitos são normalmente gerados pela preparação inadequada das juntas ou degradação do adesivo devido ao ambiente (por exemplo, humidade), reduzindo a qualidade da ligação e influenciando a resistência da junta. Neste trabalho é apresentado um estudo experimental e numérico de juntas de sobreposição simples (JSS) com a inclusão de defeitos centrados na camada de adesivo para comprimentos de sobreposição (LO) diferentes. Os adesivos utilizados foram o Araldite® AV138, apresentado como sendo frágil, e o adesivo Sikaforce® 7752, intitulado como adesivo dúctil. A parte experimental consistiu no ensaio à tração das diferentes JSS permitindo a obtenção das curvas força-deslocamento (P-δ). A análise numérica por modelos de dano coesivo (MDC) foi realizada para analisar as tensões de arrancamento ((σy) e as tensões de corte (τxy) na camada adesiva, para estudar a variável de dano do MDC durante o processo de rotura e para avaliar a capacidade dos MDC na previsão da resistência da junta. Constatou-se um efeito significativo dos defeitos de diferentes dimensões na resistência das juntas, que também depende do tipo de adesivo utilizado e do valor de LO. Os modelos numéricos permitiram a descrição detalhada do comportamento das juntas e previsão de resistência, embora para o adesivo dúctil a utilização de uma lei coesiva triangular tenha provocado alguma discrepância relativamente aos resultados experimentais.
Resumo:
Background: Allergic rhinitis and asthma (ARA) are chronic inflammatory diseases of the airways that often coexist in children. The only tool to assess the ARA control, the Control of Allergic Rhinitis and Asthma Test (CARAT) is to be used by adults. We aimed to develop the Pediatric version of Control of Allergic Rhinitis and Asthma Test (CARATkids) and to test its comprehensibility in children with 4 to 12 years of age. Methods: The questionnaire development included a literature review of pediatric questionnaires on asthma and/or rhinitis control and two consensus meetings of a multidisciplinary group. Cognitive testing was carried out in a cross-sectional qualitative study using cognitive interviews. Results: Four questionnaires to assess asthma and none to assess rhinitis control in children were identified. The multidisciplinary group produced a questionnaire version for children with 17 questions with illustrations and dichotomous (yes/no) response format. The version for caregivers had 4-points and dichotomous scales. Twenty-nine children, 4 to 12 years old, and their caregivers were interviewed. Only children over 6 years old could adequately answer the questionnaire. A few words/expressions were not fully understood by children of 6 to 8 years old. The drawings illustrating the questions were considered helpful by children and caregivers. Caregivers considered the questionnaire complete and clear and preferred dichotomous over the 4-points scales. The proportion of agreement between children and their caregivers was 61%. The words/expressions that were difficult to understand were amended. Conclusion: CARATkids, the first questionnaire to assess a child’s asthma and rhinitis control was developed and its content validity was assured. Cognitive testing showed that CARATKids is well-understood by children 6 to 12 years old. The questionnaire’s measurement properties can now be assessed in a validation study.
Resumo:
SUMMARY The aim of this study was to evaluate the effects of the protein-calorie malnutrition in BALB/c isogenic mice infected with Lacazia loboi, employing nutritional and histopathological parameters. Four groups were composed: G1: inoculated with restricted diet, G2: not inoculated with restricted diet, G3: inoculated with regular diet, G4: not inoculated with regular diet. Once malnutrition had been imposed, the animals were inoculated intradermally in the footpad and after four months, were sacrificed for the excision of the footpad, liver and spleen. The infection did not exert great influence on the body weight of the mice. The weight of the liver and spleen showed reduction in the undernourished groups when compared to the nourished groups. The macroscopic lesions, viability index and total number of fungi found in the footpads of the infected mice were increased in G3 when compared to G1. Regarding the histopathological analysis of the footpad, a global cellularity increase in the composition of the granuloma was observed in G3 when compared to G1, with large numbers of macrophages and multinucleated giant cells, discrete numbers of lymphocytes were present in G3 and an increase was observed in G1. The results suggest that there is considerable interaction between Jorge Lobo's disease and nutrition.
Resumo:
Species of the genus Leishmania (Kinetoplastida, Trypanosomatidae) are causative agents of leishmaniasis, a complex disease with variable clinical spectrum and epidemiological diversity, constituting, in some countries, a serious public health problem. The origin and evolution of leishmaniasis has been under discussion regarding some clinical and parasitological aspects. After the introduction of paleoparasitology, molecular methods and immunodiagnostic techniques have been applied allowing the recovery of parasite remains, as well as the diagnosis of past infections in humans and other hosts. The dating of archaeological samples has allowed the parasitological analysis in time and space. This manuscript presents the state of the art of leishmaniasis and prospects related to paleoparasitology studies and their contribution to the evolutionary and phylogenetic clarification of parasites belonging to the genus Leishmania, and the leishmaniasis caused by them.
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial
Resumo:
BACKGROUND: This study's objective was to evaluate the role of psychological adjustment in the decision-making process to have an abortion and explore individual variables that might influence this decision. METHODS: In this cross-sectional study, we sequentially enrolled 150 women who made the decision to voluntarily terminate a pregnancy in Maternity Dr. Alfredo da Costa, in Lisbon, Portugal, between September 2008 and June 2009. The instruments were the Depression, Anxiety and Stress Scale (DASS), Satisfaction with Social Support Scale (SSSS), Emotional Assessment Scale (EAS), Decision Conflict Scale (DCS), and Beliefs and Values Questionnaire (BVQ). We analyzed the data using Student's T-tests, MANOVA, ANOVA, Tukey's post-hoc tests and CATPCA. Statistically significant effects were accepted for p<0.05. RESULTS: The participants found the decision difficult and emotionally demanding, although they also identified it as a low conflict decision. The prevailing emotions were sadness, fear and stress; but despite these feelings, the participants remained psychologically adjusted in the moment they decided to have an abortion. The resolution to terminate the pregnancy was essentially shared with supportive people and it was mostly motivated by socio-economic issues. The different beliefs and values found in this sample, and their possible associations are discussed. CONCLUSION: Despite high levels of stress, the women were psychologically adjusted at the time of making the decision to terminate the pregnancy. However, opposing what has been previously reported, the women presented high levels of sadness and fear, showing that this decision was hard to make, triggering disruptive emotions.
Resumo:
INTRODUCTION: The index of microcirculatory resistance (IMR) enables/provides quantitative, invasive, and real-time assessment of coronary microcirculation status. AIMS: The primary aim of this study was to validate the assessment of IMR in a large animal model, and the secondary aim was to compare two doses of intracoronary papaverine, 5 and 10 mg, for induction of maximal hyperemia and its evolution over time. METHODS: Measurements of IMR were performed in eight pigs. Mean distal pressure (Pd) and mean transit time (Tmn) were measured at rest and at maximal hyperemia induced with intracoronary papaverine, 5 and 10 mg, and after 2, 5, 8 and 10 minutes. Disruption of the microcirculation was achieved by selective injection of 40-μm microspheres via a microcatheter in the left anterior descending artery. RESULTS: In each animal 14 IMR measurements were made. There were no differences between the two doses of papaverine regarding Pd response and IMR values - 11 ± 4.5 U with 5 mg and 10.6 ± 3 U with 10 mg (p=0.612). The evolution of IMR over time was also similar with the two doses, with significant differences from resting values disappearing after five minutes of intracoronary papaverine administration. IMR increased with disrupted microcirculation in all animals (41 ± 16 U, p=0.001). CONCLUSIONS: IMR provides invasive and real-time assessment of coronary microcirculation. Disruption of the microvascular bed is associated with a significant increase in IMR. A 5-mg dose of intracoronary papaverine is as effective as a 10-mg dose in inducing maximal hyperemia. After five minutes of papaverine administration there is no significant difference from resting hemodynamic status.
Resumo:
Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação.
Resumo:
Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação