1000 resultados para parte hartzea
Resumo:
O desenvolvimento das cultivares de guandu IAC-Fava Larga (C1), ICP-7035 (C3) e daiinhagem IAC-87318 (C2) foi estudado em três idades, aos 14,28 e 42 dias após a semeadura, em casa de vegetação. Foram avaliados os seguintes parâmetros: altura (cm), número de folhas, área foliar (dm²), densidade de raízes (cm de raiz/cm³ de substrato) e massa seca (g) de caules, lâminas foliares e raízes. O experimento foi conduzido em delineamento inteiramente casualizado, com três repetições. As médias das medidas de crescimento das cultivares foram comparadas entre si, pelo teste de Tukey, em cada idade, tendo a cultivar C2 apresentado maior crescimento do sistema radicular e da parte aérea, aos 14, 28 e 42 dias. As cultivares C3 e C1, apresentaram plântulas menos vigorosas e com menor quantidade de raízes. Os sistemas radiculares de C1, C2 e C3 alcançaram cerca de 60cm de profundidade, aos 14 dias, e os de C2 e C3 no final do experimento, aos 42 dias, quando atingiram 100cm.
Resumo:
O glaucoma é uma doença grave que acomete humanos e animais, levando à degeneração de estruturas nervosas e à perda progressiva da visão. Vários eventos estão relacionados à fisiopatologia do glaucoma, como o aumento da pressão intra-ocular, o aumento nos níveis de glutamato intra-celular e a diminuição do fluxo axoplasmático. Fármacos recentemente disponíveis no mercado, aliados às novas técnicas cirúrgicas, suscitam perspectivas mais eficazes para o controle do glaucoma e aq preservação da visão.
Resumo:
O glaucoma mantém-se como uma das principais causas de cegueira em pacientes humanos e entre os animais domésticos. No curso da sua patogênese, ocorre aumento da pressão intra-ocular e morte de células retinianas, cujo início pode ser precoce. Fármacos vêm sendo desenvolvidos visando a se obter o controle da pressão intra-ocular e a proteger as células retinianas da apoptose e morte. O presente artigo revisa a farmacologia, as indicações e os efeitos adversos das principais substâncias utilizadas topicamente no tratamento do glaucoma em cães, além de discutir as técnicas cirúrgicas contemporâneas que passam melhor se adequar ao seu controle.
Resumo:
OBJETIVO: avaliar as medidas de atividade e critérios de melhora clínica para o lúpus eritematoso sistêmico juvenil (LESJ) e dermatomiosite juvenil (DMJ), desenvolvidos por meio de consenso entre especialistas. MÉTODOS E RESULTADOS: para o LESJ, as medidas essenciais em cinco domínios e as respectivas variáveis foram: 1) avaliação global pelo médico por escala analógica visual de 0-10 cm; 2) avaliação da qualidade de vida relacionada à saúde (índice Físico - CHQ-PF50); 3) avaliação da atividade pelos pais/paciente por escala analógica visual de 0-10 cm; 4) avaliação renal (proteinúria 24 h); e 5) avaliação global da atividade por instrumento específico (SLEDAI ou ECLAM). A definição preliminar de melhora clínica para o JSLE foi: melhora > 50% em pelo menos 2 das 5 variáveis e não mais que uma com piora > 30%, a qual não pode ser a proteinúria de 24h em casos com envolvimento renal. Os seis domínios e as respectivas variáveis selecionadas para a atividade na DMJ foram: 1) avaliação global pelo médico por escala analógica visual de 0-10 cm; 2) avaliação da força muscular proximal por meio de teste específico - CMAS-Childhood Myositis Assessment Scale 0-52; 3) avaliação da capacidade funcional (CHAQ); 4) avaliação da atividade pelos pais/paciente por escala analógica visual de 0-10 cm; 5) avaliação da qualidade de vida relacionada à saúde (Índice Físico - CHQ-PF50); 6) avaliação global da atividade por meio de instrumento específico (DAS - Disease Activity Score). A definição preliminar de melhora clínica para a DMJ foi: pelo menos 3 de quaisquer das 6 variáveis com melhora > 20% e não mais que uma com piora > 30%, a qual não pode ser o CMAS. CONCLUSÕES: estas variáveis foram testadas em uma casuística representativa e mostraram propriedades estatísticas adequadas de responsividade e validade discriminativa, podendo ser estudadas em ensaios terapêuticos.
Resumo:
As fibras de vidro e de polietileno podem ser utilizadas na prática ortodôntica em diversas situações clínicas, nos casos com ou sem extrações dentárias. Este artigo tem como objetivo mostrar algumas das aplicações clínicas nas quais as fibras contribuíram de forma significativa para a realização dos tratamentos ortodônticos, simplificando-os e aumentando a eficiência clínica. As fibras foram utilizadas principalmente em segmentos de ancoragem e na substituição da banda pela colagem da associação fibra/tubo nos molares.
Resumo:
The authors looked for the verification of the fatigue of retentive clasps utilized on the removable partial denture. According to this, it was idealized and built on assay machine, that through movements, simulate the insertion and removal of the clasp for a pattern tooth, manufactured on cobalt-chromium which has all the preparation normally utilized to the correct confection of this type of prosthesis. It was utilized three different commercial alloys based on cobalt-chromium: L1-Biosil; L2-Steldent; L3-Duracron. It was utilized the T clasp of Roach, with was tested upon three different proportions among width and thickness: E1-1.7;E2-2.0 and E3-2.3 and was casted through two casting techniques: F1-oxygen-gas and F2-oxygen-acetylene. The clasps were tested on the machine, which allowed the reading of the number of insertion and removal cycles made until fatigue appeared. The obtained results were submitted to the statistic analysis and the authors concluded that: a) L3 (Duracrom) obtained the best results followed by L1 (Biosil) and finally L3 (Steldent); b) among the analyzed thickness, the best results were obtained by E3, followed by E2 and after this E1; c) form the casting techniques, F2 gave us the best results.
Resumo:
The authors tested the T clasp of Roach in three differents proportions among width and thickness: E1-1.7; E2-2.0 and E3-2.3, with a constant length of 15 mm. These clasps were casted with three cobalt-chromium alloys (L1-Biosil; L2-Steldent and L3-Duracrom), through two casting techniques (F1-oxygen-gas and F2-oxygen-acetylene). The fatigue of the clasps were verified by using and assay machine, that through movements, simulate the insertion and removal of the clasps for a pattern which were obtained from a premolar, prepared in a surveyor. This machine detect the fatigue of the clasps and count the number of cycles of insertion and removal realized. The obtained results of the interaction between the analysed factors, were submitted to the statistic analysis and the authors concluded that: a) the interaction of factors, Alloy x Thickness, Alloy x Casting Technique and Thickness x Casting Technique did not change the order of effects that the factors showed separately but gave rise to effects of different magnitude for any observed sense; b) the simultaneous interaction of the factors Alloy x Thickness x Casting Technique confirmed the superiority of the L3 alloy, the thickness E3 and the F2 casting technique.
Resumo:
A greenhouse experiment was conducted in the Soil Science Department of the Botucatu College of Agricultural Sciences (UNESP), Brazil, using a Dark Red Latosol in 25 L pots. The soil was limed to 50 and 70% of base saturation; and doses 0, 10, 20, 30 and 40 t ha-1 of chicken manure were applied, in December of 1999. The experimental design was completely randomized blocks with a factorial arrangement 5x2, 10 treatments and three replications. This work was carried to evaluate leaf number, height plants, fresh and dry weight by aerial part of sweet fennel, and macronutrients and micronutrients removal. The organic fertilization affected the accumulation of N, P, K, S, B and Mn; liming affected the nutrient uptake, except for the Ca, Mg, S and Fe; the interaction of factors affected K, Mg and Mn.
Resumo:
Due to an increasing interest, a vast number of biodegradable polymers have been obtained recently. Polymers naturally produced, such as cellulose, starch, chitosan and alginate, represent biodegradable materials, with low toxicity and low cost. Among polysaccharides, chitosan has been of great interest of the industrial and academic research, due to its special qualities of biodegradability and biocompatibility and, on the other hand, to the versatility of its use in several physical forms and products. A significant growth in the development of new dosage forms capable to deliver the drug in a controlled and targeted way has been observed in these last years. Such pharmaceutical forms search, mainly, the reduction of the dose administered and of the administration frequency, the reduction of adverse side effects and, consequently, a better patient compliance. The present paper describes the use of chitosan in pharmaceutical products, especially in drug controlled delivery systems.
Resumo:
Stryphnodendron adstringens (Mart.) Coville (barbatimão), belonging to Mimosaceae family; it is used as ornamental and the wood is used in civil buildings, edification in wet places, lathe and joinery jobs, being very used also in home-made medicine against hemorrhage, diarrhea, hemorrhoids, conjunctivitis, injury cleaning, uterus hemorrhage, ulcerous hurt and excessive oily skin. The objective of this research was to determine the allelopathic potential of an aqueous extract, boiled or not of S. adstringens (Mart.) Coville, in the Cucumis sativus germination and initial development. Thus, the aqueous vegetable extract was extracted from the shoot, which was triturated in 1L of distilled water to 100g of leaf, being the extract filtrated and separated in boiled and not boiled. The treatments used were distilled water (0%) and boiled and not boiled extracts, in the concentrations of 50 and 100%. The cucumber seeds were put to germinate in Gerbox, having filter paper as substrate, which was wet with 25mL from different treatments, in constant temperature of 25°C. The reading germination was accomplished in breaks of 24 hours, for a period of five consequently days after the beginning of the experiment, considering germinated the seeds that showed 2mm of root, approximately. To dry matter determination, the seedlings with five days after the germination were separated in shoot and root, dried during three days to a constant weight in a 60°C forced draft oven. Through results, it can be concluded that the extract of S. adstringens affected more the Cucumis sativus seedling development than the germination, and it didn't show difference if boiled or not.
Resumo:
Three pig genetics lineages A, B and C marketed in Brazil, were stunning with the manual electric stunning (Karl Schermer 220-230/250 volts, 45-60 Hz and 1.4 - 1.5 A) and the collective gaseous system (COMBI-BUTINA 90% CO 2). The electric stunning provided higher blood splashed levels in the areas of the inside round (0.477 and 0.26, p ≤ 0.01), shoulder/cranial (0.154 and 0.039, p ≤ 0.005), shoulder/central (0.261 e 0.052, p ≤ 0.001), shoulder/caudal (0.180 and 0.030, p ≤ 0.01), loin/central (0.185 and 0.065, p ≤ 0.01), loin/caudal (0.06 and 0.207, p ≤ 0.01) and loin/lateral external (0.061 and 0.013, p ≤ 0.05), as well as more diffuse blood splashed in the areas of the inside round (0.461 and 0.279, p ≤ 0.05), shoulder/cranial (0.154 and 0.039, p ≤ 0.001), shoulder/central (0.231 and 0.039, p ≤ 0.001) and shoulder/caudal (0.185 and 0.026, p ≤ 0.001). The electric stunning also provided higher skin damage levels in the areas of the shoulder (1.098 and 0.795, p ≤ 0.001), body (1.04 and 0.948, p ≤ 0.05) and ham (0.84 and 0.68, p ≤ 0.001), as well as higher eyelid reflex levels (11.57%) comparatively to the gaseous system (2.86%) of a total of 426 pigs. Small indexes of bone fractures and muscle bruises were found in both systems.
Resumo:
Pigs of three genetics lineages A, B and C marketed in Brazil, with alive weight from 100 to 120 kg were submitted to the manual electric stunning (Karl Schermer 220-230/250 volts, 45-60 Hz and 1.4 -1.5 A) and to the collective gaseous system (COMBI-BUTINA 90% CO 2). Blood samples, for levels determination of creatine phosphokinase (CPK), lactate and cortisol, as well as samples of the semimembranosus muscle (10 g) for the determination of the gene halothane, were collected. Being compared the electric and gaseous stunning systems, the electric stunning did demonstrate to be more stressful providing larger plasmatic concentrations of cortisol (p ≤ 0.001) and lactate (p ≤ 0.001) for the genetic lineages A and C, in the studied conditions. However it didn't observe significant differences beween the sanguine indicators and stunning systems in subject when the lineage B was considered. Significant differences among the genetic lineages A, B and C were obtained being compared the plasmatic values of creatine phosphokinase (p ≤ 0.001), lactate (p ≤ 0.001) and cortisol (p ≤ 0.001) when stunned with the gaseous system, however when the electric system was used only the cortisol values presented significant differences (p ≤ 0.001). The presence of the gene halothane (Nn) was only observed in the lineage B.
Resumo:
The possible development of thermal events in the central portion of São Paulo state was described based on apatite fission track analysis. Using apatites of sedimentary rocks of the Paraná Basin, modeling the thermal history was made possible due to the homogeneity of the data. Every thermal history begins with a total annealing of fission tracks, related to the Serra Geral magmatism, evolving into a cooling period. In addition to cooling after the magmatism (Early Cretaceous) two other periods of cooling were also detected, registered in the Late Cretaceous/ Paleocene and Eocene, driven as much by uplift with tectonic denudation as by faulting. The nearest portion of the edge of the basin (external to the Dome of Pitanga), registered a period of warming over the Paleocene that can be attributed to the increase in the geothermal gradient. The periods of cooling have a regional and temporal relationship with the tectonic events that occurred in the southeastern Brazil and were described in the crystalline basement. The period of warming, registered in the Late Cretaceous/ Paleocene, has local occurrence and can be found only in the southern portion of the studied area.
Resumo:
The aim of this work was to evaluate the effect of soil compaction caused by tractor wheel traffic on the limiting water range (LLWR), shoot growth and levels of compaction and four replications in a completely randomized experimental design. Soil samples with preserved structure were collected in the layers: 0.02-0.05; 0.08-0.11; 0.15-0.18 and 0.22-0.25m to determine macroporosity, microporosity, total porosity, bulk density, resistance to penetration and LLWR. The evaluated corn parameters were: plant and first spike height, steam diameter, number of spikes per plant, plant dry matter, dry matter of 1000 seeds and seed productivity. The soil compaction restricted all corn parameters except the number of spikes per plant and dry matter of 1000 seeds. The LLWR was reduced by the soil resistance to penetration, even in the tilled soil with bulk density of 1.12 Mg m-3. Only the treatment with 11 Mg tractor, repeated four times on the area, demonstrated bulk density above critical bulk density in the LLWR that was 1.37 Mg m-3, where the seed productivity was significantly smaller.