Tubular Organization of SnO₂ Nanocrystallites for Improved Lithium Ion Battery Anode Performance

Porous tin oxide nanotubes were obtained by vacuum infiltration of tin oxide nanoparticles into porous aluminum oxide membranes, followed by calcination. The porous tin oxide nanotube arrays so prepared were characterized by FE-SEM, TEM, HRTEM, and XRD. The nanotubes are open-ended, highly ordered with uniform cross-sections, diameters and wall thickness. The tin oxide nanotubes were evaluated as a substitute anode material for the lithium ion batteries. The tin oxide nanotube anode could be charged and discharged repeatedly, retaining a specific capacity of 525 mAh/g after 80 cycles. This capacity is significantly higher than the theoretical capacity of commercial graphite anode (372 mAh/g) and the cyclability is outstanding for a tin based electrode. The cyclability and capacities of the tin oxide nanotubes were also higher than their building blocks of solid tin oxide nanoparticles. A few factors accounting for the good cycling performance and high capacity of tin oxide nanotubes are suggested.

Diseño y realización de servicios de presentación en entornos gráficos.

En cada unidad didáctica precede al tít.: Técnico Superior en Desarrollo de Aplicaciones Informáticas y consta en marbetes: Formación Profesional a Distancia y Ciclo Formativo de Grado Superior

Identificación de escenarios a futuro para lograr competitividad en el sector de telefonía móvil en Colombia al año 2020

Este trabajo pretende explorar el desarrollo del sector de la telefonía móvil desde sus inicios hasta la actualidad en Colombia, con el fin de generar escenarios de futuro. Las herramientas prospectivas MicMac (Análisis Estructural Prospectivo), Smic (Sistema de Matrices de Impactos Cruzados) y la opinión de expertos líderes del sector, son la base principal para el desarrollo del trabajo. Las entidades gubernamentales, la CTR (Comisión de Regulación de Telecomunicaciones), y los líderes de los operadores del sector de telefonía móvil, entre otros, se han concientizado que la innovación es la base del éxito en este tipo de organizaciones y por eso se ha trabajado en mejorar su regulación, logrando de esta manera que el desarrollo de los productos y servicios que se ofrecen sean cada vez mejores y perjudique en menor medida al medio ambiente y a los usuarios. Este subsector de las telecomunicaciones, es el más dinámico y con mayor potencial. Sin embargo, este también es afectado por las condiciones económicas del mercado, la inestabilidad política, las importaciones y exportaciones derivadas de los tratados comerciales, entre otros temas. El escenario apuesta facilitaría la prestación de productos con tecnología de punta y servicios con la mejor cobertura y acceso posible a precios bajos.

Lecture 7 - Going Loopy

Looping while do while for Arrays indexes For each loop

Go Mic review

Short review of the Go Mic portable microphone by Samson which is ideal for podcasting

Programming Principles: Collections and Iterators

In this session we look at how we can use collection objects like ArrayList as a more advanced type of array. We also introduce the idea of generics (forcing a collection to hold a particular type) and see how Java handles the autoboxing and unboxing of primitives. Finally we look at Iterators, a common design pattern for dealing with iteration over a collection.

Verificación de los niveles de atenuación de dos tipos de protectores auditivos tipo copa en trabajadores de una empresa del sector Hidrocarburos. Barrancabermeja-Colombia 2013.

El presente estudio se realizó con el fin de verificar los niveles de atenuación de dos tipos de protectores auditivos tipo copa, bajo condiciones reales de operación en una empresa del sector hidrocarburos en Colombia. Esta verificación se llevó a cabo determinando las diferencias existentes entre los niveles de atenuación establecidos por el fabricante (NRR Teórico), los niveles de atenuación ajustados de acuerdo a la metodología propuesta por NIOSH (NRR Ajustado) y los niveles de atenuación obtenidos experimentalmente (NRR Experimental). El estudio se desarrolló sobre la evaluación de los niveles equivalentes de presión sonora, mediante dosimetrías de doble canal, valorando los niveles de ruido al interior y al exterior del pabellón auditivo de forma simultánea. Los valores obtenidos en las mediciones se ajustaron a los criterios establecidos en la norma ISO 11904 parte 1 considerando la estimación de niveles de inmisión sonora mediante técnica MIRE (Microphone In a Real Ear) corregidos a condiciones de campo libre. Los resultados obtenidos permitieron establecer diferencias significativas entre los niveles de atenuación teóricos, ajustados y experimentales, aspecto que brinda oportunidades de mejora cuando se trata de seleccionar y mantener elementos de protección personal auditiva como estrategia preventiva primaria en el propósito de la disminución de la probabilidad de ocurrencia de hipoacusia neurosensorial inducida por ruido en el lugar de trabajo.

Aspectos, consideraciones y orientaciones sobre la enseñanza del español de los negocios en Corea.

Resumen basado en el de la publicación. Memoria de master (Universidad Pablo de Olavide, 2010)

The calibration and use of probe-test microphones

This paper examines the characteristics of the probe-tube microphone and its use in measuring sound pressure in the ear canal. Specifically the paper studies the free field and the coupler calibrations of several probe-tube microphones with tubes of different sizes and determines which characteristics of a probe tube are necessary for accurate measurements in both a free field and in a closed coupler.

Hearing-aid volume control adjustment by deaf children

This paper examines hearing aid volume control adjustments by deaf children. Specifically the study looks at how accurately deaf children set the volume controls of their hearing aids, if deaf children are able to comprehend the effects of talker-microphone distance on stimulus intensity, and do deaf children use their hearing aids to monitor their own voices. Access to thesis is restricted. Contact Archives and Rare Books.

New insights on growth mechanisms of protein clusters at surfaces: an AFM and simulation study

Despite its relevance to a wide range of technological and fundamental areas, a quantitative understanding of protein surface clustering dynamics is often lacking. In inorganic crystal growth, surface clustering of adatoms is well described by diffusion-aggregation models. In such models, the statistical properties of the aggregate arrays often reveal the molecular scale aggregation processes. We investigate the potential of these theories to reveal hitherto hidden facets of protein clustering by carrying out concomitant observations of lysozyme adsorption onto mica surfaces, using atomic force microscopy. and Monte Carlo simulations of cluster nucleation and growth. We find that lysozyme clusters diffuse across the substrate at a rate that varies inversely with size. This result suggests which molecular scale mechanisms are responsible for the mobility of the proteins on the substrate. In addition the surface diffusion coefficient of the monomer can also be extracted from the comparison between experiments and simulations. While concentrating on a model system of lysozyme-on-mica, this 'proof of concept' study successfully demonstrates the potential of our approach to understand and influence more biomedically applicable protein-substrate couples.

Development of multi-electrode array screening for anticonvulsants in acute rat brain slices

The acute hippocampal brain slice preparation is an important in vitro screening tool for potential anticonvulsants. Application of 4-aminopyridine (4-AP) or removal of external Mg2+ ions induces epileptiform bursting in slices which is analogous to electrical brain activity seen in status epilepticus states. We have developed these epileptiform models for use with multi-electrode arrays (MEAs), allowing recording across the hippocampal slice surface from 59 points. We present validation of this novel approach and analyses using two anticonvulsants, felbamate and phenobarbital, the effects of which have already been assessed in these models using conventional extracellular recordings. In addition to assessing drug effects on commonly described parameters (duration, amplitude and frequency), we describe novel methods using the MEA to assess burst propagation speeds and the underlying frequencies that contribute to the epileptiform activity seen. Contour plots are also used as a method of illustrating burst activity. Finally, we describe hitherto unreported properties of epileptiform bursting induced by 100M4-AP or removal of external Mg2+ ions. Specifically, we observed decreases over time in burst amplitude and increase over time in burst frequency in the absence of additional pharmacological interventions. These MEA methods enhance the depth, quality and range of data that can be derived from the hippocampal slice preparation compared to conventional extracellular recordings. It may also uncover additional modes of action that contribute to anti-epileptiform drug effects

Modelling habitat selection and distribution of the critically endangered Jerdon's courser Rhinoptilus bitorquatus in scrub jungle: an application of a new tracking method

1. Jerdon's courser Rhinoptilus bitorquatus is a nocturnally active cursorial bird that is only known to occur in a small area of scrub jungle in Andhra Pradesh, India, and is listed as critically endangered by the IUCN. Information on its habitat requirements is needed urgently to underpin conservation measures. We quantified the habitat features that correlated with the use of different areas of scrub jungle by Jerdon's coursers, and developed a model to map potentially suitable habitat over large areas from satellite imagery and facilitate the design of surveys of Jerdon's courser distribution. 2. We used 11 arrays of 5-m long tracking strips consisting of smoothed fine soil to detect the footprints of Jerdon's coursers, and measured tracking rates (tracking events per strip night). We counted the number of bushes and trees, and described other attributes of vegetation and substrate in a 10-m square plot centred on each strip. We obtained reflectance data from Landsat 7 satellite imagery for the pixel within which each strip lay. 3. We used logistic regression models to describe the relationship between tracking rate by Jerdon's coursers and characteristics of the habitat around the strips, using ground-based survey data and satellite imagery. 4. Jerdon's coursers were most likely to occur where the density of large (>2 m tall) bushes was in the range 300-700 ha(-1) and where the density of smaller bushes was less than 1000 ha(-1). This habitat was detectable using satellite imagery. 5. Synthesis and applications. The occurrence of Jerdon's courser is strongly correlated with the density of bushes and trees, and is in turn affected by grazing with domestic livestock, woodcutting and mechanical clearance of bushes to create pasture, orchards and farmland. It is likely that there is an optimal level of grazing and woodcutting that would maintain or create suitable conditions for the species. Knowledge of the species' distribution is incomplete and there is considerable pressure from human use of apparently suitable habitats. Hence, distribution mapping is a high conservation priority. A two-step procedure is proposed, involving the use of ground surveys of bush density to calibrate satellite image-based mapping of potential habitat. These maps could then be used to select priority areas for Jerdon's courser surveys. The use of tracking strips to study habitat selection and distribution has potential in studies of other scarce and secretive species.

Mid-infrared filters for astronomical and remote sensing instrumentation

As improvements to the optical design of spectrometer and radiometer instruments evolve with advances in detector sensitivity, use of focal plane detector arrays and innovations in adaptive optics for large high altitude telescopes, interest in mid-infrared astronomy and remote sensing applications have been areas of progressive research in recent years. This research has promoted a number of developments in infrared coating performance, particularly by placing increased demands on the spectral imaging requirements of filters to precisely isolate radiation between discrete wavebands and improve photometric accuracy. The spectral design and construction of multilayer filters to accommodate these developments has subsequently been an area of challenging thin-film research, to achieve high spectral positioning accuracy, environmental durability and aging stability at cryogenic temperatures, whilst maximizing the far-infrared performance. In this paper we examine the design and fabrication of interference filters in instruments that utilize the mid-infrared N-band (6-15 µm) and Q-band (16-28 µm) atmospheric windows, together with a rationale for the selection of materials, deposition process, spectral measurements and assessment of environmental durability performance.

Mean flow and turbulence statistics over groups of urban-like cubical obstacles

Direct numerical simulations of turbulent flow over regular arrays of urban-like, cubical obstacles are reported. Results are analysed in terms of a formal spatial averaging procedure to enable interpretation of the flow within the arrays as a canopy flow, and of the flow above as a rough wall boundary layer. Spatial averages of the mean velocity, turbulent stresses and pressure drag are computed. The statistics compare very well with data from wind-tunnel experiments. Within the arrays the time-averaged flow structure gives rise to significant 'dispersive stress' whereas above the Reynolds stress dominates. The mean flow structure and turbulence statistics depend significantly on the layout of the cubes. Unsteady effects are important, especially in the lower canopy layer where turbulent fluctuations dominate over the mean flow.