Time-resolved studies of neutral and ionized Na_n clusters with femtosecond light pulses

The real-time dynamics of Na_n (n=3-21) cluster multiphoton ionization and fragmentation has been studied in beam experiments applying femtosecond pump-probe techniques in combination with ion and electron spectroscopy. Three dimensional wave packet motions in the trimer Na_3 ground state X and excited state B have been observed. We report the first study of cluster properties (energy, bandwidth and lifetime of intermediate resonances Na_n^*) with femtosecond laser pulses. The observation of four absorption resonances for the cluster Na_8 with different energy widths and different decay patterns is more difficult to interpret by surface plasmon like resonances than by molecular structure and dynamics. Timeresolved fragmentation of cluster ions Na_n^+ indicates that direct photo-induced fragmentation processes are more important at short times than the statistical unimolecular decay.

Analytical Study of Light Propagation in Highly Nonlinear Media

The present dissertation is devoted to the construction of exact and approximate analytical solutions of the problem of light propagation in highly nonlinear media. It is demonstrated that for many experimental conditions, the problem can be studied under the geometrical optics approximation with a sufficient accuracy. Based on the renormalization group symmetry analysis, exact analytical solutions of the eikonal equations with a higher order refractive index are constructed. A new analytical approach to the construction of approximate solutions is suggested. Based on it, approximate solutions for various boundary conditions, nonlinear refractive indices and dimensions are constructed. Exact analytical expressions for the nonlinear self-focusing positions are deduced. On the basis of the obtained solutions a general rule for the single filament intensity is derived; it is demonstrated that the scaling law (the functional dependence of the self-focusing position on the peak beam intensity) is defined by a form of the nonlinear refractive index but not the beam shape at the boundary. Comparisons of the obtained solutions with results of experiments and numerical simulations are discussed.

Synthesis and Characterization of Novel Spiro-Starburst-Structures as Blue Light Emitters and Zeolites

Spiro-starburst-structures with symmetric globular structures in forms of first and second generations that readily form stable amorphous glasses have been synthesized and then characterised in this work. During the synthesis of these materials, possibilities of the extension of the chains of the phenyl rings in 2,2’,7 and 7’-positions of the central core of the spirobifluorene as well as the 2’,7 and 7’-positions of the terminal spirobifluorene units of the spiro-starburst-structures have been investigated so that solubilities and morphologies of the compounds are not negatively influenced. Their morphological properties have been explored by recording their decomposition temperature and glass transition temperature. These compounds possessing two perpendicular arrangement of the two molecular halves show high glass transition temperature (Tg), which is one of the most important parameter indicating the stability of the amorphous state of the material for optoelectronic devices like organic light emitting diodes. Within the species of second generation compounds, for example, 4-spiro3 shows the highest Tg (330 °C) and the highest branching degree. When one [4B(SBF)SBF-SBF 84] or two [4SBFSBF-SBF 79] terminal spirobifluorene units are removed, the Tg decreases to 318 °C and 307 °C respectively. Photo absorption and fluorescence spectra and cyclic voltammetry measurements are taken in account to characterize the optoelectronic properties of the compounds. Spiro-starburst-structures emit radiation in the blue region of the visible spectrum. The peak maxima of absorption and emission spectra are observed to be at higher wavelength in the molecules with longer chromophore chains than in the molecules with shorter chromophore chains. Excitation spectra are monitored with their emission peak maxima. The increasing absorbing species in molecule leads to increasing molar extinction coefficient. In the case of 4B(TP)SBF-SBF 53 and 4B(SBF)SBF-SBF 84, the greater values of the molar extinction coefficients (43*104 and 44*104 L mol-1 cm-1 respectively) are the evidences of the presence of four times octiphenyl conjugation rings and eight times terminal fluorene units respectively. The optical properties of solid states of these compounds in the form of thin film indicate that the intermolecular interaction and aggregation of individual molecules in neat amorphous films are effectively hindered by their sterically demanding structures. Accordingly, in solid state, they behave like isolated molecules in highly dilute solution. Cyclic voltammetry measurements of these compounds show electrochemically reversibility and stability. Furthermore, the zeolitic nature (host-guest) of the molecular sieve of the synthesized spiro-starburst-structures has been analysed by thermogravimetric analysis method.

Characterization of the molecular clockwork in the cockroach Rhyparobia maderae

Der Wechsel von Tag und Nacht erzeugt einen regelmäßigen Rhythmus von verschiedenen Umweltreizen, allen voran Licht und Temperatur. Fast jedes bis zum heutigen Tage untersuchte Lebewesen besitzt einen endogenen Mechanismus zur Zeitwahrnehmung, und diese "innere Uhr" befähigt Lebewesen dazu, sich vorausschauend an rhythmische Umwelt-Änderungen anzupassen. Circadiane Rhythmen bestehen auch ohne jegliche äußere Reize und basieren auf einem molekularen Rückkopplungs-Mechanismus, der Rhythmen in Genexpression und Proteinkonzentration von etwa 24 Stunden erzeugt. Obwohl sich die grundsätzlichen Mechanismen und Komponenten dieses molekularen Uhrwerks in allen Insekten ähneln, zeigte sich jedoch immer mehr, dass es im Detail doch wesentliche Unterschiede zwischen verschiedenen Insektengruppen gibt. Während das molekulare Uhrwerk der Fruchtfliege Drosophila melanogaster inzwischen sehr gut untersucht ist, fehlen bei den meisten Insektengruppen immernoch eingehende Untersuchungen. Fast nichts ist über die molekulare Basis von circadianen Rhythmen bei der Schabe Rhyparobia maderae bekannt, obwohl diese Art bereits seit Langem als Modellorganismus in der Chronobiologie dient. Um mit der Forschung am molekularen, circadianen System von R. maderae zu beginnen, wurde die Struktur und das Expressionsprofil der core feedback loop Gene per, tim1 und cry2 analysiert. Mittels degenerierten Primern und RACE konnte das vollständige offene Leseraster (OLR) von rmPer und rmCry2, und ein Teil des rmTim1 OLR kloniert werden. Eine phylogenetische Analyse gruppierte rmPER und rmCRY2 gemeinsam mit den Orthologa hemimetaboler Insekten. Viele bei D. melanogaster funktionell charakterisierte Domänen sind bei diesen Proteinen konserviert, was auf eine ähnliche Funktion in der inneren Uhr von R. maderae hinweist. Mittels quantitativer PCR konnte gezeigt werden, dass die mRNA von rmPer, rmTim1 und rmCry2 in verschiedenen Lichtregimen in der gleichen Phasenlage Tageszeit-abhängig schwankt. Die Phasenlage stellte sich bei unterschiedlichen Photoperioden jeweils relativ zum Beginn der Skotophase ein, mit Maxima in der ersten Hälfte der Nacht. Auch im Dauerdunkel zeigen sich Rhythmen in der rmTim1 und rmCry2 Expression. Die Amplitude der rmPer Expressionsrhythmen war jedoch so gering, dass keine signifikanten Unterschiede zwischen den einzelnen Zeitgeberzeiten (ZT) festgestellt werden konnten. Mittels Laufrad-Assays wurde untersucht wie Kurz- und Langtag Lichtregime die Verhaltensrhythmen beeinflussen. Es konnten nur Unterschiede in der Periodenlänge unter freilaufenden Bedingungen festgestellt werden, wenn höhere Lichtintensitäten (1000lx) zur Synchronisation (entrainment) genutzt wurden. Die Periode des freilaufenden Rhythmus war bei Tieren aus dem Kurztag länger. Die photoperiodische Plastizität zeigte sich also auch auf Verhaltensebene, obwohl höhere Lichtintensitäten notwendig waren um einen Effekt zu beobachten. Basierend auf den Sequenzen der zuvor klonierten OLR wurden gegen rmPER, rmTIM1 und rmCRY2 gerichtete Antikörper hergestellt. Die Antikörper gegen rmPER und rmTIM1 erkannten in western blots sehr wahrscheinlich spezifisch das jeweilige Protein. Zeitreihen von Gehirngewebe-Homogenisaten zeigten keinen offensichtlichen circadianen Rhythmus in der Proteinkonzentration, wahrscheinlich auf Grund einer Oszillation mit niedriger Amplitude. In Immunhistochemischen Färbungen konnte nur mit dem gegen rmPER gerichteten Antikörper aus Kaninchen ein Signal beobachtet werden. Beinahe jede Zelle des Zentralnervensystems war rmPER-immunreaktiv im Zellkern. Es konnten keine Unterschiede zwischen den untersuchten ZTs festgestellt werden, ähnlich wie bei den western blot Zeitreihen. In dieser Studie konnten erstmals molekulare Daten der circadianen Uhr von R. maderae erfasst und dargestellt werden. Die Uhrgene per, tim1 und cry2 werden in dieser Schabenart exprimiert und ihre Domänenstruktur sowie das circadiane Expressionsmuster ähneln dem hypothetischen ursprünglichen Insektenuhrwerk, welches der circadianen Uhr von Vertebraten nahesteht. Das molekulare Uhrwerk von R. maderae kann sich an unterschiedliche Photoperioden anpassen, und diese Anpassungen manifestieren sich im Expressionsprofil der untersuchten Uhrgene ebenso wie im Verhalten.

Asymptotic model for shape resonance control of diatomics by intense non-resonant light

We derive a universal model for atom pairs interacting with non-resonant light via the polarizability anisotropy, based on the long range properties of the scattering. The corresponding dynamics can be obtained using a nodal line technique to solve the asymptotic Schrödinger equation. It consists of imposing physical boundary conditions at long range and vanishing the wavefunction at a position separating the inner zone and the asymptotic region. We show that nodal lines which depend on the intensity of the non-resonant light can satisfactorily account for the effect of the polarizability at short range. The approach allows to determine the resonance structure, energy, width, channel mixing and hybridization even for narrow resonances.

Asymptotic model for shape resonance control of diatomics by intense non-resonant light: universality in the single-channel approximation

Non-resonant light interacting with diatomics via the polarizability anisotropy couples different rotational states and may lead to strong hybridization of the motion. The modification of shape resonances and low-energy scattering states due to this interaction can be fully captured by an asymptotic model, based on the long-range properties of the scattering (Crubellier et al 2015 New J. Phys. 17 045020). Remarkably, the properties of the field-dressed shape resonances in this asymptotic multi-channel description are found to be approximately linear in the field intensity up to fairly large intensity. This suggests a perturbative single-channel approach to be sufficient to study the control of such resonances by the non-resonant field. The multi-channel results furthermore indicate the dependence on field intensity to present, at least approximately, universal characteristics. Here we combine the nodal line technique to solve the asymptotic Schrödinger equation with perturbation theory. Comparing our single channel results to those obtained with the full interaction potential, we find nodal lines depending only on the field-free scattering length of the diatom to yield an approximate but universal description of the field-dressed molecule, confirming universal behavior.

Design and Control of an Anthropomorphic Robotic Finger with Multi-point Tactile Sensation

The goal of this research is to develop the prototype of a tactile sensing platform for anthropomorphic manipulation research. We investigate this problem through the fabrication and simple control of a planar 2-DOF robotic finger inspired by anatomic consistency, self-containment, and adaptability. The robot is equipped with a tactile sensor array based on optical transducer technology whereby localized changes in light intensity within an illuminated foam substrate correspond to the distribution and magnitude of forces applied to the sensor surface plane. The integration of tactile perception is a key component in realizing robotic systems which organically interact with the world. Such natural behavior is characterized by compliant performance that can initiate internal, and respond to external, force application in a dynamic environment. However, most of the current manipulators that support some form of haptic feedback either solely derive proprioceptive sensation or only limit tactile sensors to the mechanical fingertips. These constraints are due to the technological challenges involved in high resolution, multi-point tactile perception. In this work, however, we take the opposite approach, emphasizing the role of full-finger tactile feedback in the refinement of manual capabilities. To this end, we propose and implement a control framework for sensorimotor coordination analogous to infant-level grasping and fixturing reflexes. This thesis details the mechanisms used to achieve these sensory, actuation, and control objectives, along with the design philosophies and biological influences behind them. The results of behavioral experiments with a simple tactilely-modulated control scheme are also described. The hope is to integrate the modular finger into an %engineered analog of the human hand with a complete haptic system.

Student self-assessment a feedback seeking strategy through competence evaluation

There is a body of literature that suggests that student self-assessment is a main goal in higher education (Boud et al., 1995; Tan, 2008); moreover new forms of work organization require a high level of skills and competences. The efforts to deal with competence gaps could be developed at many levels, such as employers, educational institutions, individuals and public agents. Employers could put into practice competence development programs to moderate these gaps. Educational institutions can restructure the curriculum to support students in attaining the competences that are essential in the labour market. Individuals themselves may deploy their resources (time and money) in general or specific competence training. Further, government agencies could fund competence promotion programs. Such challenges for education drive change in learning curricula and method, to properly include the competences required for developing global workers who can move beyond basic competence, to enhanced flexibility and adaptability. In performance assessment methods, there is a shift from the traditional exam-based assessments to more innovative task assessment, which considers performance in multiple different tasks carry out by students. ICTs make it technologically feasible to carry out a complete and complex selfassessment of competences, which provides immediate results to students or other recipients. In the case of students, the evaluation of competences is relevant as developing competences is part - if not all - of the objectives of education. Therefore, it is an important element of the quality of educational organizations (e.g., universities), and of their organizational success. Further, educational organizations may put special emphasis on some differentiating competences, which can be a means of positioning and differentiation from competitors. Competence assessment is an instrument to make students conscious of their strengths and weaknesses, leading to higher motivation to develop their own learning career

Anxiogenic-like effects of gamma-hydroxybutyric acid (GHB) in mice. 'Efectos ansiog??nicos del ??cido gamma-hidroxibut??rico (GBH) en ratones evaluados en el test del 'light-dark'

Resumen tomado de la publicaci??n

Calibration of a Structured Light-Based Stereo Catadioptric Sensor

Catadioptric sensors are combinations of mirrors and lenses made in order to obtain a wide field of view. In this paper we propose a new sensor that has omnidirectional viewing ability and it also provides depth information about the nearby surrounding. The sensor is based on a conventional camera coupled with a laser emitter and two hyperbolic mirrors. Mathematical formulation and precise specifications of the intrinsic and extrinsic parameters of the sensor are discussed. Our approach overcomes limitations of the existing omni-directional sensors and eventually leads to reduced costs of production

An approach to visual servoing based on coded light

Positioning a robot with respect to objects by using data provided by a camera is a well known technique called visual servoing. In order to perform a task, the object must exhibit visual features which can be extracted from different points of view. Then, visual servoing is object-dependent as it depends on the object appearance. Therefore, performing the positioning task is not possible in presence of non-textured objects or objects for which extracting visual features is too complex or too costly. This paper proposes a solution to tackle this limitation inherent to the current visual servoing techniques. Our proposal is based on the coded structured light approach as a reliable and fast way to solve the correspondence problem. In this case, a coded light pattern is projected providing robust visual features independently of the object appearance

Robust decoupled visual servoing based on structured light

This paper focuses on the problem of realizing a plane-to-plane virtual link between a camera attached to the end-effector of a robot and a planar object. In order to do the system independent to the object surface appearance, a structured light emitter is linked to the camera so that 4 laser pointers are projected onto the object. In a previous paper we showed that such a system has good performance and nice characteristics like partial decoupling near the desired state and robustness against misalignment of the emitter and the camera (J. Pages et al., 2004). However, no analytical results concerning the global asymptotic stability of the system were obtained due to the high complexity of the visual features utilized. In this work we present a better set of visual features which improves the properties of the features in (J. Pages et al., 2004) and for which it is possible to prove the global asymptotic stability

Plane-to-plane positioning from image-based visual servoing and structured light

In this paper we face the problem of positioning a camera attached to the end-effector of a robotic manipulator so that it gets parallel to a planar object. Such problem has been treated for a long time in visual servoing. Our approach is based on linking to the camera several laser pointers so that its configuration is aimed to produce a suitable set of visual features. The aim of using structured light is not only for easing the image processing and to allow low-textured objects to be treated, but also for producing a control scheme with nice properties like decoupling, stability, well conditioning and good camera trajectory