Efeito da forma física da ração sobre a porosidade, espessura da casca, perda de água e eclodibilidade em ovos de perdiz (Rhynchotus rufescens)

O objetivo do presente estudo foi avaliar se a forma física da ração (farelada e peletizada) afeta a porosidade e espessura da casca, e porcentagem de perda de água e eclodibilidade de ovos de perdiz. Os ovos foram coletados logo após a postura e separados em diferentes intervalos de peso (35-45g, 46-50g, 51-55g, 56-60g e 61-70g), sendo 10 ovos/classe/ração. O número de poros das cascas foi avaliado nas regiões apical, equatorial e basal dos ovos. Utilizou-se um micrômetro digital para a mensuração da espessura das três regiões da casca dos ovos, a partir dos quais obteve-se a espessura média por ovo. Os ovos para avaliação da eclodibilidade e porcentagem de perda de água do ovo até a transferência para o nascedouro (16º dia) foram pesados, desinfectados, incubados (T=35,5ºC e UR= 70%) e transferidos no 16º dia de incubação para o nascedouro, onde foram mantidos até a eclosão. As análises estatísticas empregadas foram: Análise de Variância e de Correlação, e teste de Tukey 5%. Os dados mostraram que, em perdizes, o número de poros na casca pode variar com a região da casca, peso do ovo e a forma física da ração, e que a ingestão de ração peletizada promove um aumento na espessura da casca dos ovos sem alterar a eclodibilidade e a porcentagem de perda de água dos mesmos durante a incubação.

Germinação de sementes de Caesalpinia leiostachya (benth.) ducke (pau-ferro) classificadas pelo tamanho e pela forma

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise e classificação de imagens de lesões da pele por atributos de cor, forma e textura utilizando máquina de vetor de suporte

The skin cancer is the most common of all cancers and the increase of its incidence must, in part, caused by the behavior of the people in relation to the exposition to the sun. In Brazil, the non-melanoma skin cancer is the most incident in the majority of the regions. The dermatoscopy and videodermatoscopy are the main types of examinations for the diagnosis of dermatological illnesses of the skin. The field that involves the use of computational tools to help or follow medical diagnosis in dermatological injuries is seen as very recent. Some methods had been proposed for automatic classification of pathology of the skin using images. The present work has the objective to present a new intelligent methodology for analysis and classification of skin cancer images, based on the techniques of digital processing of images for extraction of color characteristics, forms and texture, using Wavelet Packet Transform (WPT) and learning techniques called Support Vector Machine (SVM). The Wavelet Packet Transform is applied for extraction of texture characteristics in the images. The WPT consists of a set of base functions that represents the image in different bands of frequency, each one with distinct resolutions corresponding to each scale. Moreover, the characteristics of color of the injury are also computed that are dependants of a visual context, influenced for the existing colors in its surround, and the attributes of form through the Fourier describers. The Support Vector Machine is used for the classification task, which is based on the minimization principles of the structural risk, coming from the statistical learning theory. The SVM has the objective to construct optimum hyperplanes that represent the separation between classes. The generated hyperplane is determined by a subset of the classes, called support vectors. For the used database in this work, the results had revealed a good performance getting a global rightness of 92,73% for melanoma, and 86% for non-melanoma and benign injuries. The extracted describers and the SVM classifier became a method capable to recognize and to classify the analyzed skin injuries

Compressão auto-adaptativa de imagens coloridas

Image compress consists in represent by small amount of data, without loss a visual quality. Data compression is important when large images are used, for example satellite image. Full color digital images typically use 24 bits to specify the color of each pixel of the Images with 8 bits for each of the primary components, red, green and blue (RGB). Compress an image with three or more bands (multispectral) is fundamental to reduce the transmission time, process time and record time. Because many applications need images, that compression image data is important: medical image, satellite image, sensor etc. In this work a new compression color images method is proposed. This method is based in measure of information of each band. This technique is called by Self-Adaptive Compression (S.A.C.) and each band of image is compressed with a different threshold, for preserve information with better result. SAC do a large compression in large redundancy bands, that is, lower information and soft compression to bands with bigger amount of information. Two image transforms are used in this technique: Discrete Cosine Transform (DCT) and Principal Component Analysis (PCA). Primary step is convert data to new bands without relationship, with PCA. Later Apply DCT in each band. Data Loss is doing when a threshold discarding any coefficients. This threshold is calculated with two elements: PCA result and a parameter user. Parameters user define a compression tax. The system produce three different thresholds, one to each band of image, that is proportional of amount information. For image reconstruction is realized DCT and PCA inverse. SAC was compared with JPEG (Joint Photographic Experts Group) standard and YIQ compression and better results are obtain, in MSE (Mean Square Root). Tests shown that SAC has better quality in hard compressions. With two advantages: (a) like is adaptive is sensible to image type, that is, presents good results to divers images kinds (synthetic, landscapes, people etc., and, (b) it need only one parameters user, that is, just letter human intervention is required

Otimização de forma aplicando B-splines sob critério integral de tensões

This work proposes a computational methodology to solve problems of optimization in structural design. The application develops, implements and integrates methods for structural analysis, geometric modeling, design sensitivity analysis and optimization. So, the optimum design problem is particularized for plane stress case, with the objective to minimize the structural mass subject to a stress criterion. Notice that, these constraints must be evaluated at a series of discrete points, whose distribution should be dense enough in order to minimize the chance of any significant constraint violation between specified points. Therefore, the local stress constraints are transformed into a global stress measure reducing the computational cost in deriving the optimal shape design. The problem is approximated by Finite Element Method using Lagrangian triangular elements with six nodes, and use a automatic mesh generation with a mesh quality criterion of geometric element. The geometric modeling, i.e., the contour is defined by parametric curves of type B-splines, these curves hold suitable characteristics to implement the Shape Optimization Method, that uses the key points like design variables to determine the solution of minimum problem. A reliable tool for design sensitivity analysis is a prerequisite for performing interactive structural design, synthesis and optimization. General expressions for design sensitivity analysis are derived with respect to key points of B-splines. The method of design sensitivity analysis used is the adjoin approach and the analytical method. The formulation of the optimization problem applies the Augmented Lagrangian Method, which convert an optimization problem constrained problem in an unconstrained. The solution of the Augmented Lagrangian function is achieved by determining the analysis of sensitivity. Therefore, the optimization problem reduces to the solution of a sequence of problems with lateral limits constraints, which is solved by the Memoryless Quasi-Newton Method It is demonstrated by several examples that this new approach of analytical design sensitivity analysis of integrated shape design optimization with a global stress criterion purpose is computationally efficient

Remoção de óleo da água de produção por flotação em coluna utilizando tensoativos de origem vegetal

In the petroleum industry, water is always present in the reservoir formation together with petroleum and natural gas and this fact provokes the production of water with petroleum, resulting in a great environmental impact. Several methods can be applied for treatment of oily waters, such as: gravitational vases, granulated media filtration systems, flotation process, centrifugation process and the use of hydrocyclones, which can also be used in a combined way. However, the flotation process has showed a great efficiency as compared with other methods, because these methods do not remove great part of the emulsified oil. In this work was investigated the use of surfactants derived from vegetable oils, OSS and OGS, as collectors, using the flotation process in a glass column with a porous plate filter in its base for the input of the gaseous steam. For this purpose, oil/water emulsions were prepared using mechanical stirring, with concentrations around 300 ppm. The air flow rate was set at 700 cm3/min and the porous plate filter used for the generation of the air bubbles has pore size varying from 16 to 40 Pm. The column operated at constant volume (1500mL). A new methodology has been developed to collect the samples, where, instead of collecting the water phase, it was collected the oil phase removed by the process in the top of the flotation column. It has been observed that it is necessary to find an optimum surfactant concentration to achieve enhanced removal efficiency. Being for OSS 1.275 mmol/L and for OGS 0.840 mmol/L, with removal efficiencies of 93% and 99%, respectively, using synthetic solutions. For the produced water, the removal in these concentrations was 75% for OSS and 65% for OGS. It is possible to remove oil from water in a flotation process using surfactants of high HLB, fact that is against the own definition of HLB (Hydrophile-Lipophile Balance). The interfacial tension is an important factor in the oil removal process using a flotation process, because it has direct interference in the coalescence of the oil drops. The spreading of the oil of the air bubble should be considered in the process, and for the optimum surfactant concentrations it reached a maximum value. The removal kinetics for the flotation process using surfactants in the optimum concentration has been adjusted according to a first order model, for synthetic water as for the produced water.

Otimização do processo de recuperação do cromo de efluentes de curtumes por microemulsões no extrator Morris

The tanning industries are those which transform animal hide or skin into leather. Due to the complexity of the transformation process, greater quantities of chemicals are being used which results in the generation of effluents with residual solids. The chromium in the residual waters generated by tanning tend to be a serious problem to the environment, therefore the recovery of this metal could result in the reduction of manufacturing costs. This metal is usually found in a trivalent form which can be converted into a hexavalent compound under acidic conditions and in the presence of organic matter. The present study was carried out with the objective to recover chromium through an extraction/re-extraction process using micro emulsions. Micro emulsions are transparent and thermodynamically stable system composed of two immiscible liquids, one forming the continuous phase and the other dispersed into micro bubbles, established by an interfacial membrane formed by surface active and co-surface active molecules. The process of recovering the chromium was carried out in two stages. The first, an extraction process, where the chromium was extracted in the micro emulsion phase and the aqueous phase in excess was separated. In the second stage, a concentrated acid was added to the micro emulsion phase rich in chromium in order to obtain a Winsor II system, where the water that formed in the micro emulsion phase separates into a new micro emulsion phase with a higher concentration of chromium, due to the lowering of the hydrophiles as well as the ionisation of the system. During the experimental procedure, a study was initiated with a synthetic solution of chromium sulphate passing onto the effluent. A Morris extractor was used in the extraction process. Tests were carried out according to the plan and the results were analysed by statistical methods in order to optimise the main parameters that influence the process: the total rate of flow (Q), stirring speed (w) and solvent rate (r). The results, after optimization, demonstrated that the best percentuals in relation to the chromium extraction (99 %) were obtained in the following operational conditions: Q= 2,0 l/h, w= 425 rpm and r= 0,375. The re-extraction was carried out at room temperature (28 °C), 40 °C and 50°C using hydrochloric acid (8 and 10 M) and sulphuric acid (8 M) as re-extracting agents. The results obtained demonstrate that the process was efficient enough in relation to the chromium extraction, reaching to re-extraction percentage higher than 95 %.

Otimização do processo de flotação de emulsão óleo/água através do planejamento fatorial completo

In recent decades, the generation of solid and liquid waste has increased substantially due to increased industrial activity that is directly linked to economic growth. For that is the most efficient process, it is inevitable generation of such wastes. In the oil industry, a major waste generated in oil exploration is produced water, which due to its complex composition and the large amount generated, has become a challenge, given the restrictions imposed by environmental laws regarding their disposal, making if necessary create alternatives for reuse or treatment in order to reduce the content of contaminants and reduce the harmful effects to the environment. This water can be present in free form or emulsified with the oil, when in the form of an emulsion of oil-water type, it is necessary to use chemicals to promote the separation and flotation is the treatment method which has proved to be more efficient, for it can remove much of the emulsified oil when compared to other methods. In this context, the object of this work was to study the individual effects and interactions of some physicochemical parameters of operations, based on previous work to a flotation cell used in the separation of synthetic emulsion oil / water in order to optimize the efficiency of the separation process through of the 24 full factorial design with center point. The response variables to evaluate the separation efficiency was the percentage of color and turbidity removal. The independent variables were: concentration of de-emulsifying, oil content in water, salinity and pH, these being fixed, minimum and maximum limits. The analysis of variance for the equation of the empirical model, was statistically significant and useful for predictive purposes the separation efficiency of the floater with R2 > 90%. The results showed that the oil content in water and the interaction between the oil content in water and salinity, showed the highest values of the estimated effects among all the factors investigated, having great and positive influence on the separation efficiency. By analyzing the response surface was determined maximum removal efficiency above 90% for both measured for turbidity as a measure of color when in a saline medium (30 g/L), the high oil concentrations (306 ppm) using low concentrations of de-emulsifying (1,1 ppm) and at pH close to neutral

Recuperação e purificação de proteínas do soro de queijo tipo coalho usando cromatografia de troca iônica e interação hidrofóbica em leito na forma expandida

Expanded Bed Adsorption plays an important role in the downstream processing mainly for reducing costs as well as steps besides could handling cells homogenates or fermentation broth. In this work Expanded Bed Adsorption was used to recover and purify whey proteins from coalho cheese manufacture using Streamline DEAE and Streamline SP both ionic resins as well as a hydrophobic resin Streamline Phenyl. A column of 2.6 cm inner diameter with 30 cm in height was coupled to a peristaltic pump. Hydrodynamics study was carried out with the three resins using Tris-HCl buffer in concentration of 30, 50 and 70 mM, with pH ranging from 7.0 to 8.0. In this case, assays of the expansion degree as well as Residence Time Distribution (RTD) were carried out. For the recovery and purification steps, a whey sample of 200 mL, was submitted to a column with 25mL of resin previously equilibrated with Tris/HCl (50 mM, pH 7.0) using a expanded bed. After washing, elution was carried out according the technique used. For ionic adsorption elution was carried out using 100 mL of Tris/HCl (50 mM, pH 7.0 in 1M NaCl). For Hydrophobyc interaction elution was carried out using Tris/HCl (50 mM, pH 7.0). Adsorption runs were carried out using the three resins as well as theirs combination. Results showed that for hydrodynamics studies a linear fit was observed for the three resins with a correlation coefficient (R2) about 0.9. In this case, Streamline Phenyl showed highest expansion degree reaching an expansion degree (H0/H) of 2.2. Bed porosity was of 0.7 when both resins Streamline DEAE and Streamline SP were used with StremLine Phenyl showing the highest bed porosity about 0.75. The number of theorical plates were 109, 41.5 and 17.8 and the axial dipersion coefficient (Daxial) were 0.5, 1.4 and 3.7 x 10-6 m2/s, for Streamline DEAE, Streamline SP and Streamline Phenyl, respectively. Whey proteins were adsorved fastly for the three resins with equilibrium reached in 10 minutes. Breakthrough curves showed that most of proteins stays in flowthrough as well as washing steps with 84, 77 and 96%, for Streamline DEAE, Streamline SP and Streamline Phenyl, respectively. It was observed protein peaks during elution for the three resins used. According to these peaks were identified 6 protein bands that could probably be albumin (69 KDa), lactoferrin (76 KDa), lactoperoxidase (89 KDa), β-lactoglobulin (18,3 KDa) e α-lactoalbumin (14 KDa), as well as the dimer of beta-lactoglobulin. The combined system compound for the elution of Streamline DEAE applied to the Streamline SP showed the best purification of whey proteins, mainly of the α-lactoalbumina

A Compreensão da idéia do número racional e suas operações na EJA: uma forma de inclusão em sala de aula

The awareness of the difficulty which pupils, in general have in understanding the concept and operations with Rational numbers, it made to develop this study which searches to collaborate for such understanding. Our intuition was to do with that the pupils of the Education of Young and Adults, with difficulty in understanding the Rational numbers, feel included in the learning-teaching process of mathematics. It deals with a classroom research in a qualitative approach with analysis of the activities resolved for a group of pupils in classroom of a municipal school of Natal. For us elaborate such activities we accomplished the survey difficulties and obstacles that the pupils experience, when inserted in the learning-teaching process of the Rational numbers. The results indicate that the sequence of activities applied in classroom collaborated so that the pupils to overcome some impediments in the learning of this numbers

Acurácia e precisão: revendo os conceitos de forma acurada

Accuracy concepts that involve systematic and random effects and precision, that involves only random ones, are reviewed in this paper. An objective discussion is presented based on the definitions that appear in the literature, followed by examples that may be enough to clarify some concepts and allow the extension for other applications. The discussion presented aims at raising eventual inconsistencies in the interpretations so as to provide better possibilities of use for those involved with this topic, which is fundamentally important in the quality analysis of cartographic, geodetic and remote sensing or photogrammetric products.

A reformulação parafrástica na fundamentação teórica de trabalhos de conclusão de curso de Letras

In this work, we study the types of paraphrases used by the students of the Language and Literature Course when they reformulate a source text in the theoretical section of the monographs produced as texts for the conclusion of the course. Our main goal is to know how the process of textual reformulation takes place in the production of the monographic gender. From the used theoretical orientation (Fuchs,1982; 1994; Charaudeau and Maingueneau, 2006; Fávero et al, 2007; Hilgert, 1997, 2002, 2006; among others) we have worked with the paraphrase notion as an activity of discoursive reformulation, considering as the basic groundings the situation of communication and the subjects, or the wider context. In a more specific way, we have considered that the paraphrase performs alterations in the formal level, in the semantic level and in the functional level. Besides that, we sought to articulate the practice of paraphrasing to the gender of discourse in which it appears and to the contextual implications involved in the producing of the gender in question, and in doing so we were grounded in Baktin´s (2003) and Maingueneau´s (1998; 2001) postulates. For the analysis of the corpus that consists of 19 monographs, we have used the three categories defined by Hilgert (2002, 2006):expansion, condensation and parallelism as a way of identifying, describing and characterizing the types of paraphrases used by the students who produced the monographs when they take up Travaglia´s (1996) text about the language conceptions. The results show that the use of the paraphrastic parallelism (with 69.45 % in relation to only 18.41% of condensation and 12.13 % of expansion) was the most recurrent in the reformulations performed by the students who produced the monographs and this manifestation was characterized mainly by the lexical-semantic repetition of fragments of the source text. We have concluded that the high incidence of paraphrastic parallelism is an indication that the student does not have a command of the ways of production and circulation of the discoursive genders uttered in the academic-scientific realm

Vou estar fazendo ... um estudo funcionalista de uma (nova) forma perifrástica de futuro

The work in evidence analyzes the use in the ways periphasis of gerund - FPG - (to go+to be+gerund) in the speech (gender class) of the teachers of Natal, Caicó and Serra Negra do Norte, potiguares cities. For that, she opted to constitute corpus, once the data found in other corpora they were inexpressive for the research. The study tries to elucidate the reasons that take the speaker to use a form of larger future in detriment of the more it tans; it investigates as it feels the manifestation of the grammaticalization and demarcation - beginnings givonianos. Besides Givón (1979, 1984, 1990, 1995 e 2001), other authors served as light: Cunha (1986); Bechara (2007); Cunha and Cintra (2007); Perini (2006); Neves (2000, 2006) Silva (2005); Furtado da Cunha and Tavares (2007); Gibbon (2000); Torres (2009). After the study, the results that point the appearance in a new way of future expression emerged, marked and with tendency the grammaticalization

O Ateneu e a nostalgia na forma

The actual study proposes Raul d‟Ávila Pompéia‟s O Ateneu (1888) among the most significant works in Brazilian Literature panorama, according to the perspective of verbal materiality of the Romanesque genre under a form nostalgia sign that, in its turn, ascends to the archaic origin poetry of fable. Along with large rereading of pertinent bibliography, it is gone here toward narrator Sergio‟s crônica de saudades on pursuit of showing it, firstly, as poetic language allegory updated in the novel technique; secondly, as radical metalanguage that still renders problematic several aspects of modern fictional prose

Detecção de cor e forma por Callithrix jacchus em cativeiro

Callithrix jacchus studies involving differences between the sexes regarding the performance on tasks food still offers room for the investigation of some factors, among them there is the differences in color vision, which can directly influence the detection of visual clues on food items. This study aimed to analyze the performance of C. jacchus in tasks involving detection of food items. Some factors were analyzed such as the differences in performance between the sexes and behavioral categories present during the task. There were no differences in performance between the animals in carrying out the task, for all situations presented, examining the behavioral categories observed. The fact of the task to be very simple might have influenced the results, and it was not possible to observe differences in performance. Males and females showed the same performance in all analyzed situations. The sex differences were not found possibly due to the influence of external factors, such as the structure of the experimental apparatus. The animals are more efficient in carrying out the task during the morning, in comparison to the afternoon. The light may have been one of the factors that influenced these results. Due to the influence of other factors that probably contributed to these results, we believe that different results can be found in future work