986 resultados para erro refracional
Resumo:
Esta é uma investigação sobre os erros linguísticos mais frequentes praticados por professores e alunos em textos formais. Trata-se de um estudo de caso, realizado numa escola pública com ensino básico e secundário da Região Autónoma da Madeira. Os testes dos alunos e as atas que os professores redigem das várias reuniões em que participam na escola constituem os corpora dos textos formais. Os informantes foram trinta e dois alunos, todos do 12º ano de cursos científico-humanísticos, e oitenta professores de diversos grupos disciplinares. Dado que não foi possível abranger todos os tipos de erros observados, optou-se por analisar as três áreas gramaticais em que a sua ocorrência foi mais problemática, a saber, ortografia, pontuação e coesão sintática, em detrimento de outras como a semântica, a lexicologia e a coerência textual. Este é um trabalho eminentemente prático que tem como objetivos primordiais enumerar os principais erros observados e comparar as diferenças de desempenho entre os dois grupos de informantes. Para isso, dividiu-se a análise em duas partes: a primeira é, essencialmente, descritiva e interpretativa; enquanto a segunda se baseia nos dados quantitativos para chegar a conclusões que, de outra forma, não seriam percetíveis. No final, sugerem-se algumas estratégias que poderão ajudar a diminuir a incidência do erro no meio escolar.
Resumo:
O objetivo deste projeto foi o de realizar a sincronização de pelo menos quatro câmaras individuais, ajustando dinamicamente o frame rate de operação de cada câmara, tendo por base a família de sensores de imagem CMOS NanEye da empresa Awaiba, numa plataforma FPGA com interface USB3. Durante o projeto analisou-se, com a assistência de um supervisor da Awaiba, o sistema core de captura de imagem existente, baseado em VHDL. Foi estudado e compreendido o princípio do ajuste dinâmico do frame rate das câmaras. Tendo sido então desenvolvido o módulo de controlo da câmara, em VHDL, e um algoritmo de ajuste dinâmico do frame rate, sendo este implementado junto com a plataforma de processamento e interface da FPGA. Foi criado um módulo para efetuar a monitorização da frequência de operação de cada câmara, medindo o período de cada linha numa frame, tendo por base um sinal de relógio de valor conhecido. A frequência é ajustada variando o nível de tensão aplicado ao sensor com base no erro entre o período da linha medido e o período pretendido. Para garantir o funcionamento conjunto de múltiplas câmaras em modo síncrono foi implementada uma interface Master-Slave entre estas. Paralelamente ao módulo anteriormente descrito, implementou-se um sistema de controlo automático de iluminação com base na análise de regiões de interesse em cada frame captada por uma câmara NanEye. A intensidade de corrente aplicada às fontes de iluminação acopladas à câmara é controlada dinamicamente com base no nível de saturação dos pixéis analisados em cada frame. Foram desenvolvidas e implementadas variantes do algoritmo de controlo e o seu desempenho foi avaliado em laboratório. Os resultados obtidos na prática evidenciam que a solução implementada cumpre os requisitos de controlo e ajuste da frequência de operação de múltiplas câmaras. Mostrou ser um método de controlo capaz de manter um erro de sincronização médio de 3,77 μs mesmo na presença de variações de temperatura de aproximadamente 50 °C. Foi também demonstrado que o sistema de controlo de iluminação é capaz de proporcionar uma experiência de visualização adequada, alcançando erros menores que 3% e uma velocidade de ajuste máxima inferior a 1 s.
Resumo:
A população de reclusos em Portugal tem aumentado gradualmente nas últimas décadas e encontra-se com uma taxa superior comparativamente a vários países europeus. Neste contexto, importa analisar as dimensões psicológicas que contribuem para a compreensão da realidade e da vivência da reclusão. Assim, o presente estudo tem como principal objetivo analisar a relação entre a escolaridade, o autoconceito e a resiliência em situação de reclusão. A amostra foi constituída por 56 reclusos, do sexo masculino, com idades compreendidas entre os 16 e os 57 anos (M = 33, DP = 9). Recorreu-se a técnicas quantitativas e qualitativas, respetivamente o Inventário Clínico do Autoconceito (ICAC) e a Escala de Resiliência para Adultos (ERA), e como meio de explorar as representações dos inquiridos no contexto de reclusão, foi utilizado um questionário com questões de resposta aberta. Os resultados obtidos indicam a não existência de relações estatisticamente significativas entre a escolaridade o autoconceito e entre a escolaridade e a resiliência; a existência de relações positivas entre as dimensões do autoconceito e da resiliência, designadamente o estilo estruturado (ERA) com o autoconceito global, a autoeficácia e a impulsividade-atividade (ICAC). Os resultados mostram que os participantes mais velhos e os reincidentes planeiam melhor o futuro; os que têm menos tempo de prisão apresentam competências sociais mais elevadas; e os reclusos que trabalham apresentam maior aceitação social; que a maioria dos reclusos tem uma má representação de si após ter cometido um crime; que as variáveis que contribuem para um bom autoconceito assinaladas são ter trabalho, não cometer o mesmo erro, ter apoio da família e ter responsabilidades. Conclui se que a escolaridade não influencia o autoconceito nem a resiliência dos participantes.
Resumo:
A presente dissertação surge como um movimento na tentativa de compreender o intrincado território textual de Gonçalo M. Tavares. Da palavra inicial que erra o mundo e que abre a possibilidade do erro e da sua correção, partirse-á para a tentativa de traçar uma cartografia da linguagem na obra polimórfica de Tavares. O mapa para este movimento será o já amplo ‘corpus’ que constitui a obra publicada do autor e que se divide por textos que vão do romance à poesia e ao ensaio, até outros de difícil catalogação. Em todos eles se poderão recolher indícios de leitura de um mapa ainda em construção, para se tentar aferir o modo como os textos literários de Tavares refletem a sua própria ficcionalidade e como, através desta, exercitam a linguagem como matéria de construção aliada ao desenho e às imagens, uma outra escrita que se grava num mesmo suporte para uma melhor compreensão do que se quer narrar ou desenhar. Afinal, como se poderá verificar, palavras e desenho partem de um mesmo ponto e de um idêntico traço para representar e questionar o mundo.
Resumo:
This study aimed to analyze the leadership style adopted by managers of nongovernmental organizations in the metropolitan region of Belem on the theory of Hersey and Blanchard. This theory is called situational leadership ranks E1, E2, E3, E4 and the styles of leadership and maturity in parallel classes M1, M2, M3 and M4. This study examined the relationship of leadership styles with the maturity of work, identified the relationship of leadership styles as related to psychological maturity and job maturity and psychological maturity. The main objectives were to analyze and relate leadership styles with the maturity of the leaders and understand the phenomenon of leadership from the self-perception of those who lead the organizations studied. To achieve the objectives we used a questionnaire already validated the theory of situational leadership and applied in 320 non-governmental organizations in the metropolitan region of Belem The methodology was quantitative, descriptive and exploratory. The analysis was by descriptive statistics and inferential statistics for univariate and bivariate form, applying the chi-square, the V Crammer and Spearman correlation. The data analysis shows safety, attested to the frequencies, and average margin of error and after application of the tests it was found that a relationship between the leadership style of work with the maturity and psychological maturity. The managers of nongovernmental organizations practicing various styles of leadership and focus on the quadrant of high maturity. It was diagnosed when the manager uses only one style of leadership was the predominance of E3 "share or support", which represents 24% of the sample. As uses two styles of leadership is the predominance of E3 and E2, which represents 76%. So the managers of nongovernmental organizations in the metropolitan region of Belem, practicing a style of leadership support, sharing ideas for decision making using a democratic style
Resumo:
This study aimed to measure the perception of maturity project management of state boards of Rio Grande do Norte by the perception of its managers. Argues that project management has been highlighted as a critical factor for the success of any organization, because the projects are directly related to the set of activities that result in organizational innovation as products, services and processes and the improvement of project management is directly aligned with the main pillars of the New Public Management. Methodologically, this is a quantitative research of a descriptive nature in which 161 forms were applied with coordinators and subcoordinators of state departments of Rio Grande do Norte, culminating in a sampling error of less than 6% to 95% confidence according to the procedures finite sampling. The process of tabulation and analysis was done using the package Statistical Package for Social Sciences - SPSS 18.0 and worked with techniques such as mean, standard deviation, frequency distributions, cluster analysis and factor analysis. The results indicate that the levels of maturity in project management in state departments of Rio Grande do Norte is below the national average and that behavioral skills are the main problem for improving management in these departments. It was possible to detect the existence of two groups of different perceptions about the management of projects, indicating, according to the managers, there are islands of excellence in project management in some sectors of the state departments. It was also observed that there are eight factors that affect maturity in project management: Planning and Control , Development of Management Skills , Project Management Environment , Acceptance of the Subject Project Management , Stimulus to Performance , Project Evaluation and Learning , Project Management Office and Visibility of Project Managers . It concludes that the project management in state departments of Rio Grande do Norte has no satisfactory levels of maturity in project management, affecting the levels of efficiency and effectiveness of the state apparatus, which shows that some of the assumptions that guide the New Public Management are not getting the levels of excellence nailed by this management model
Resumo:
This research aims to investigate the Hedge Efficiency and Optimal Hedge Ratio for the future market of cattle, coffee, ethanol, corn and soybean. This paper uses the Optimal Hedge Ratio and Hedge Effectiveness through multivariate GARCH models with error correction, attempting to the possible phenomenon of Optimal Hedge Ratio differential during the crop and intercrop period. The Optimal Hedge Ratio must be bigger in the intercrop period due to the uncertainty related to a possible supply shock (LAZZARINI, 2010). Among the future contracts studied in this research, the coffee, ethanol and soybean contracts were not object of this phenomenon investigation, yet. Furthermore, the corn and ethanol contracts were not object of researches which deal with Dynamic Hedging Strategy. This paper distinguishes itself for including the GARCH model with error correction, which it was never considered when the possible Optimal Hedge Ratio differential during the crop and intercrop period were investigated. The commodities quotation were used as future price in the market future of BM&FBOVESPA and as spot market, the CEPEA index, in the period from May 2010 to June 2013 to cattle, coffee, ethanol and corn, and to August 2012 to soybean, with daily frequency. Similar results were achieved for all the commodities. There is a long term relationship among the spot market and future market, bicausality and the spot market and future market of cattle, coffee, ethanol and corn, and unicausality of the future price of soybean on spot price. The Optimal Hedge Ratio was estimated from three different strategies: linear regression by MQO, BEKK-GARCH diagonal model, and BEKK-GARCH diagonal with intercrop dummy. The MQO regression model, pointed out the Hedge inefficiency, taking into consideration that the Optimal Hedge presented was too low. The second model represents the strategy of dynamic hedge, which collected time variations in the Optimal Hedge. The last Hedge strategy did not detect Optimal Hedge Ratio differential between the crop and intercrop period, therefore, unlikely what they expected, the investor do not need increase his/her investment in the future market during the intercrop
Resumo:
Reactive oxygen species (ROS) are produced by aerobic metabolism and react with biomolecules, such as lipids, proteins and DNA. In high concentration, they lead to oxidative stress. Among ROS, singlet oxygen (1O2) is one of the main ROS involved in oxidative stress and is one of the most reactive forms of molecular oxygen. The exposure of some dyes, such as methylene blue (MB) to light (MB+VL), is able to generate 1O2 and it is the principle involved in photodynamic therapy (PDT). 1O2 e other ROS have caused toxic and carcinogenic effects and have been associated with ageing, neurodegenerative diseases and cancer. Oxidative DNA damage is mainly repaired by base excision repair (BER) pathway. However, recent studies have observed the involvement of nucleotide excision repair (NER) factors in the repair of this type of injury. One of these factors is the Xeroderma Pigmentosum Complementation Group A (XPA) protein, which acts with other proteins in DNA damage recognition and in the recruitment of other repair factors. Moreover, oxidative agents such as 1O2 can induce gene expression. In this context, this study aimed at evaluating the response of XPA-deficient cells after treatment with photosensitized MB. For this purpose, we analyzed the cell viability and occurrence of oxidative DNA damage in cells lines proficient and deficient in XPA after treatment with MB+VL, and evaluated the expression of this enzyme in proficient and complemented cells. Our results indicate an increased resistance to treatment of complemented cells and a higher level of oxidative damage in the deficient cell lines. Furthermore, the treatment was able to modulate the XPA expression up to 24 hours later. These results indicate a direct evidence for the involvement of NER enzymes in the repair of oxidative damage. Besides, a better understanding of the effects of PDT on the induction of gene expression could be provided
Resumo:
Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations
Resumo:
A pesquisa tem como objetivo desenvolver uma estrutura de controle preditivo neural, com o intuito de controlar um processo de pH, caracterizado por ser um sistema SISO (Single Input - Single Output). O controle de pH é um processo de grande importância na indústria petroquímica, onde se deseja manter constante o nível de acidez de um produto ou neutralizar o afluente de uma planta de tratamento de fluidos. O processo de controle de pH exige robustez do sistema de controle, pois este processo pode ter ganho estático e dinâmica nãolineares. O controlador preditivo neural envolve duas outras teorias para o seu desenvolvimento, a primeira referente ao controle preditivo e a outra a redes neurais artificiais (RNA s). Este controlador pode ser dividido em dois blocos, um responsável pela identificação e outro pelo o cálculo do sinal de controle. Para realizar a identificação neural é utilizada uma RNA com arquitetura feedforward multicamadas com aprendizagem baseada na metodologia da Propagação Retroativa do Erro (Error Back Propagation). A partir de dados de entrada e saída da planta é iniciado o treinamento offline da rede. Dessa forma, os pesos sinápticos são ajustados e a rede está apta para representar o sistema com a máxima precisão possível. O modelo neural gerado é usado para predizer as saídas futuras do sistema, com isso o otimizador calcula uma série de ações de controle, através da minimização de uma função objetivo quadrática, fazendo com que a saída do processo siga um sinal de referência desejado. Foram desenvolvidos dois aplicativos, ambos na plataforma Builder C++, o primeiro realiza a identificação, via redes neurais e o segundo é responsável pelo controle do processo. As ferramentas aqui implementadas e aplicadas são genéricas, ambas permitem a aplicação da estrutura de controle a qualquer novo processo
Resumo:
Waste generated during the exploration and production of oil, water stands out due to various factors including the volume generated, the salt content, the presence of oil and chemicals and the water associated with oil is called produced water. The chemical composition of water is complex and depends strongly on the field generator, because it was in contact with the geological formation for thousands of years. This work aims to characterize the hydrochemical water produced in different areas of a field located in the Potiguar Basin. We collected 27 samples from 06 zones (400, 600, 400/600, 400/450/500, 350/400, A) the producing field called S and measured 50 required parameter divided between physical and chemical parameters, cations and anions. In hydrochemical characterization was used as tools of reasons ionic calculations, diagrams and they hydrochemical classification diagram Piper and Stiff diagram and also the statistic that helped in the identification of signature patterns for each production area including the area that supplies water injected this field for secondary oil recovery. The ionic balance error was calculated to assess the quality of the results of the analysis that was considered good, because 89% of the samples were below 5% error. Hydrochemical diagrams classified the waters as sodium chloride, with the exception of samples from Area A, from the injection well, which were classified as sodium bicarbonate. Through descriptive analysis and discriminant analysis was possible to obtain a function that differs chemically production areas, this function had a good hit rate of classification was 85%
Resumo:
In this work, spoke about the importance of image compression for the industry, it is known that processing and image storage is always a challenge in petrobrás to optimize the storage time and store a maximum number of images and data. We present an interactive system for processing and storing images in the wavelet domain and an interface for digital image processing. The proposal is based on the Peano function and wavelet transform in 1D. The storage system aims to optimize the computational space, both for storage and for transmission of images. Being necessary to the application of the Peano function to linearize the images and the 1D wavelet transform to decompose it. These applications allow you to extract relevant information for the storage of an image with a lower computational cost and with a very small margin of error when comparing the images, original and processed, ie, there is little loss of quality when applying the processing system presented . The results obtained from the information extracted from the images are displayed in a graphical interface. It is through the graphical user interface that the user uses the files to view and analyze the results of the programs directly on the computer screen without the worry of dealing with the source code. The graphical user interface, programs for image processing via Peano Function and Wavelet Transform 1D, were developed in Java language, allowing a direct exchange of information between them and the user
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
An economical solution for cementing oil wells is the use of pre-prepared dry mixtures containing cement and additives. The mixtures may be formulated, prepared and transported to the well where is added water to be pumped.Using this method, becomes dispensable to prepare the cement mixes containing additives in the cementing operation, reducing the possibility of error. In this way, the aim of this work is to study formulations of cement slurries containing solid additives for primary cementing of oil wells onshore for typical depths of 400, 800 and 1,200 meters. The formulations are comprised of Special Class Portland cement, mineral additions and solids chemical additives.The formulated mixtures have density of 1.67 g / cm ³ (14.0 lb / gal). Their optimization were made through the analysis of the rheological parameters, fluid loss results, free water, thickening time, stability test and mechanical properties.The results showed that mixtures are in conformity the specifications for cementing oil wells onshore studied depths
Resumo:
The development of oil wells drilling requires additional cares mainly if the drilling is in offshore ultra deep water with low overburden pressure gradients which cause low fracture gradients and, consequently, difficult the well drilling by the reduction of the operational window. To minimize, in the well planning phases, the difficulties faced by the drilling in those sceneries, indirect models are used to estimate fracture gradient that foresees approximate values for leakoff tests. These models generate curves of geopressures that allow detailed analysis of the pressure behavior for the whole well. Most of these models are based on the Terzaghi equation, just differentiating in the determination of the values of rock tension coefficient. This work proposes an alternative method for prediction of fracture pressure gradient based on a geometric correlation that relates the pressure gradients proportionally for a given depth and extrapolates it for the whole well depth, meaning that theses parameters vary in a fixed proportion. The model is based on the application of analytical proportion segments corresponding to the differential pressure related to the rock tension. The study shows that the proposed analytical proportion segments reaches values of fracture gradient with good agreement with those available for leakoff tests in the field area. The obtained results were compared with twelve different indirect models for fracture pressure gradient prediction based on the compacting effect. For this, a software was developed using Matlab language. The comparison was also made varying the water depth from zero (onshore wellbores) to 1500 meters. The leakoff tests are also used to compare the different methods including the one proposed in this work. The presented work gives good results for error analysis compared to other methods and, due to its simplicity, justify its possible application