Effects of Caffeoylquinic Acid Derivatives and C-Flavonoid from Lychnophora ericoides on in vitro Inflammatory Mediator Production

In this study we aimed at evaluating the effect of the major polar constituents of the medicinal plant Lychnophora ericoides on the production of inflammatory mediators produced by LPS-stimulated U-937 cells. The 6,8-di-C-beta-glucosylapigenin (vicenin-2) presented no effect on tumor necrosis factor (TNF)-alpha production, but inhibited, in a dose-dependent manner, the production of prostaglandin (PG) E(2) without altering the expression of cyclooxygenase (COX) -2 protein. 3,5-Dicaffeoylquinic acid and 4,5-dicaffeoylquinic acid, at lower concentrations, had small but significant effects on reducing PG E, levels; at higher doses these compounds stimulated PGE(2) and also TNF-alpha production by the cells. All the caffeoylquinic acid derivatives, in a dose-dependent fashion, were able to inhibit monocyte chemoattractant protein-3 synthesis/release, with 4,5-DCQ being the most potent at the highest tested concentration. These results add important information on the effects of plant natural polyphenols, namely vicenin-2 and caffeoylquinic acid derivatives, on the production of inflammatory mediators by cultured cells.

Nitric oxide synthesis blockade reduced the baroreflex sensitivity in trained rats

Objective: The present study has investigated the effect of blockade of nitric oxide synthesis on cardiovascular autonomic adaptations induced by aerobic physical training using different approaches: 1) double blockade with methylatropine and propranolol; 2) systolic arterial pressure (SAP) and heart rate variability (HRV) by means of spectral analysis; and 3) baroreflex sensitivity. Methods: Male Wistar rats were divided into four groups: sedentary rats (SR); sedentary rats treated with N(omega)-nitro-L-arginine methyl ester (L-NAME) for one week (SRL); rats trained for eight weeks (TR); and rats trained for eight weeks and treated with L-NAME in the last week (TRL). Results: Hypertension and tachycardia were observed in SRL group. Previous physical training attenuated the hypertension in L-NAME-treated rats. Bradycardia was seen in TR and TRL groups, although such a condition was more prominent in the latter. All trained rats had lower intrinsic heart rates. Pharmacological evaluation of cardiac autonomic tonus showed sympathetic predominance in SRL group, differently than other groups. Spectral analysis of HRV showed smaller low frequency oscillations (LF: 0.2-0.75 Hz) in SRL group compared to other groups. Rats treated with L-NAME presented greater LF oscillations in the SAP compared to non-treated rats, but oscillations were found to be smaller in TRL group. Nitric oxide synthesis inhibition with L-NAME reduced the baroreflex sensitivity in sedentary and trained animals. Conclusion: Our results showed that nitric oxide synthesis blockade impaired the cardiovascular autonomic adaptations induced by previous aerobic physical training in rats that might be, at least in part, ascribed to a decreased baroreflex sensitivity. (C) 2009 Elsevier B.V. All rights reserved.

Diabetes and Vascular Disease: Basic Concepts of Nitric Oxide Physiology, Endothelial Dysfunction, Oxidative Stress and Therapeutic Possibilities

The vascular manifestations associated with diabetes mellitus (DM) result from the dysfunction of several vascular physiology components mainly involving the endothelium, vascular smooth muscle and platelets. It is also known that hyperglycemia-induced oxidative stress plays a role in the development of this dysfunction. This review considers the basic physiology of the endothelium, especially related to the synthesis and function of nitric oxide. We also discuss the pathophysiology of vascular disease associated with DM. This includes the role of hyperglycemia in the induction of oxidative stress and the role of advanced glycation end-products. We also consider therapeutic strategies.

Elevated progesterone concentrations enhance prostaglandin F(2 alpha) synthesis in dairy cows

The objective was to evaluate the influence of varying plasma progesterone (P(4)) concentrations throughout the luteal phase in dairy cows on PGF(2 alpha) production (assessed as plasma concentrations of 13,14-dihydro-15-keto-PGF(2 alpha); PGFM) following treatment with estradiol-17 beta (E(2)) or oxytocin (OT). In all experiments, time of ovulations was synchronized with the OvSynch protocol and Day 0 corresponded to day of second GnRH injection. In Experiment 1, non-lactating dairy cows on Day 6 remained non-treated (n = 9), received 20 mg LH (n = 7), or had ovarian follicles larger than 6 mm aspirated (n = 8). In Experiment 2, cows on Day 6 were untreated (n = 9) or received 5000 IU hCG (n = 10). In Experiments 1 and 2, all cows received 3 mg E(2) on Day 17, and blood samples were collected every 30 min from 2h before to 10h after E(2). Experiment 3 was conducted in two periods, each from Days 0 to 17 of the estrous cycle. At the end of Period 1, animals switched treatments in a crossover arrangement. Animals in Group 2/8 (n = 4) received 2 kg/d of concentrate in the first period and 8 kg/d in the second period. Animals in Group 8/2 (n = 7) received the alternate sequence. Blood was collected daily for measurement Of P(4) 4 h after concentrate feeding. On Day 17, blood was collected from 1 h before to 1 h after a 100 IU OT injection. In Experiment 1, both plasma P(4) and release Of PGF(2 alpha) were similar between LH-treated and control cows (P > 0.10). In Experiment 2, plasma P4 was elevated to a greater extent on Day 17 in cows treated with hCG (P < 0.05) and plasma PGFM was also greater in hCG-treated animals (treatment x time interaction; P < 0.05). In Experiment 3, there was a group x period interaction (P < 0.01) for plasma P(4), indicating that less concentrate feeding was associated with greater plasma P(4). Release of PGF(2 alpha) in response to OT was greater for cows receiving less concentrate (group x period interaction; P < 0.05). In conclusion, dairy cows with more elevated blood P(4) concentrations released more PGF(2 alpha) in response to E(2) or OT. (c) 2008 Elsevier B.V. All rights reserved.

Effects of Ethanol on Synthesis of Prostaglandin F2 alpha in Bovine Females

Ethanol stimulates the production of prostaglandins in many species. The purpose of this study was to verify the effect of ethanol on the production of prostaglandin F2 alpha (PGF2 alpha) and luteolysis in bovine females. In the first experiment, Holstein cows at day 17 of the oestrous cycle were treated with 100% ethanol (0.05 ml/kg of body weight, IV; n = 5), saline (0.05 ml/kg of body weight, IV; n = 4) or synthetic prostaglandin (150 mu g of D-cloprostenol/cow, IM; n = 4). The plasma concentrations of 13, 14-dihydro-15-keto PGF2 alpha (PGFM; the main metabolite of PGF2 alpha measured in the peripheral blood) were assessed by radioimmunoassay (RIA). There was an acute release of PGFM in response to ethanol comparing to other treatments (p <= 0.05). However, only cows treated with PGF2 alpha underwent luteolysis. In the second experiment, endometrial explants of cross-bred beef cows (n = 4) slaughtered at day 17 of the oestrous cycle were cultured for 4 h. During the last 3 h, the explants were cultured with medium supplemented with 0, 0.1, I, 10 or 100 mu l of 100% ethanol/ml. Medium samples were collected at hours 1 and 4 and concentrations of PGF2 alpha were measured by RIA. Ethanol did not induce PGF2 alpha production by the endometrium. In conclusion, ethanol does not cause luteolysis in cows because it stimulates production of PGF2 alpha in extra-endometrial tissues.

Precise Insertion of Orthodontic Miniscrews with a Stereolithographic Surgical Guide Based on Cone Beam Computed Tomography Data: A Pilot Study

Purpose: Orthodontic miniscrews are commonly used to achieve absolute anchorage during tooth movement. One of the most frequent complications is screw loss as a result of root contact. Increased precision during the process of miniscrew insertion would help prevent screw loss and potential root damage, improving treatment outcomes. Stereo lithographic surgical guides have been commonly used for prosthetic implants to increase the precision of insertion. The objective of this paper was to describe the use of a stereolithographic surgical guide suitable for one-component orthodontic miniscrews based on cone beam computed tomography (CBCT) data and to evaluate implant placement accuracy. Materials and Methods: Acrylic splints were adapted to the dental arches of four patients, and six radiopaque reference points were filled with gutta-percha. The patients were submitted to CBCT while they wore the occlusal splint. Another series of images was captured with the splint alone. After superimposition and segmentation, miniscrew insertion was simulated using planning software that allowed the user to check the implant position in all planes and in three dimensions. In a rapid-prototyping machine, a stereolithographic guide was fabricated with metallic sleeves located at the insertion points to allow for three-dimensional control of the pilot bur. The surgical guide was worn during surgery. After implant insertion, each patient was submitted to CBCT a second time to verify the implant position and the accuracy of the placement of the miniscrews. Results: The average differences between the planned and inserted positions for the ten miniscrews were 0.86 mm at the coronal end, 0.71 mm at the center, and 0.87 mm at the apical tip. The average angular discrepancy was 1.76 degrees. Conclusions: The use of stereolithographic surgical guides based on CBCT data allows for accurate orthodontic mini screw insertion without damaging neighboring anatomic structures. INT J ORAL MAXILLOFAC IMPLANTS 2011;26:860-865

Effect of argon purity on mechanical properties, microstructure and fracture mode of commercially pure (cp) Ti and Ti-6Al-4V alloys for ceramometal dental prostheses

Provision of an inert gas atmosphere with high-purity argon gas is recommended for preventing titanium castings from contamination although the effects of the level of argon purity on the mechanical properties and the clinical performance of Ti castings have not yet been investigated. The purpose of this study was to evaluate the effect of argon purity on the mechanical properties and microstructure of commercially pure (cp) Ti and Ti-6Al-4V alloys. The castings were made using either high-purity and/or industrial argon gas. The ultimate tensile strength (UTS), proportional limit (PL), elongation (EL) and microhardness (VHN) at different depths were evaluated. The microstructure of the alloys was also revealed and the fracture mode was analyzed by scanning electron microscopy. The data from the mechanical tests and hardness were subjected to a two-and three-way ANOVA and Tukey`s test (alpha = 0.05). The mean values of mechanical properties were not affected by the argon gas purity. Higher UTS, PL and VHN, and lower EL were observed for Ti-6Al-4V. The microhardness was not influenced by the argon gas purity. The industrial argon gas can be used to cast cp Ti and Ti-6Al-4V.