629 resultados para Wool shearing
Resumo:
In vitro experimental environments are used to study interactions between microorganisms, and predict dynamics in natural ecosystems. This study highlights that experimental in vitro environments should be selected to closely match the natural environment of interest during in vitro studies to strengthen extrapolations about aflatoxin production by Aspergillus and competing organisms. Fungal competition and aflatoxin accumulation was studied in soil, cotton wool or tube (water-only) environments, for Aspergillus flavus competition with Penicillium purpurogenum, Fusarium oxysporum or Sarocladium zeae within maize grains. Inoculated grains were incubated in each environment at two temperature regimes (25oC and 30oC). Competition experiments showed interaction between main effects of aflatoxin accumulation and environment at 25oC, but not so at 30oC. However, competition experiments showed fungal populations were always interacting with their environments. Fungal survival differed after the 72-hour incubation in different experimental environments. Whereas, all fungi incubated within the soil environment survived; in the cotton-wool environment, none of the competitors of A. flavus survived at 30 oC. With aflatoxin accumulation, F. oxysporum was the only fungus able to interdict aflatoxin production at both temperatures. This occurred only in the soil environment and fumonisins accumulated instead. Smallholder farmers in developing countries face serious mycotoxin contamination of their grains, and soil is a natural reservoir for the associated fungal propagules, and a drying and storage surface for grains on these farms. Studying fungal dynamics in the soil environment and other environments in vitro can provide insights into aflatoxin accumulation post harvest.
Resumo:
In many studies of the side-chain liquid crystalline polymers (SCLCPs) bearing azobenzene mesogens as pendant groups, obtaining the orientation of azobenzene mesogens at a macroscopic scale as well as its control is important, because it impacts many properties related to the cooperative motion characteristic of liquid crystals and the trans-cis photoisomerization of the azobenzene molecules. Various means can be used to align the mesogens in the polymers, including rubbed surface, mechanical stretching or shearing, and electric or magnetic field. In the case of azobenzene-containing SCLCPs, another method consists in using linearly polarized light (LPL) to induce orientation of azobenzene mesogens perpendicular to the polarization direction of the excitation light, and such photoinduced orientation has been the subject of numerous studies. In the first study realized in this thesis (Chapter 1), we carried out the first systematic investigation on the interplay of the mechanically and optically induced orientation of azobenzene mesogens as well as the effect of thermal annealing in a SCLCP and a diblock copolymer comprising two SCLCPs bearing azobenzene and biphenyl mesogens, respectively. Using a supporting-film approach previously developed by our group, a given polymer film can be first stretched in either the nematic or smectic phase to yield orientation of azobenzene mesogens either parallel or perpendicular to the strain direction, then exposed to unpolarized UV light to erase the mechanically induced orientation upon the trans–cis isomerization, followed by linearly polarized visible light for photoinduced reorientation as a result of the cis–trans backisomerization, and finally heated to different LC phases for thermal annealing. Using infrared dichroism to monitor the change in orientation degree, the results of this study have unveiled complex and different orientational behavior and coupling effects for the homopolymer of poly{6-[4-(4-methoxyphenylazo)phenoxy]hexyl methacrylate} (PAzMA) and the diblock copolymer of PAzMA-block- poly{6-[4-(4-cyanophenyl) phenoxy]hexyl methacrylate} (PAzMA-PBiPh). Most notably for the homopolymer, the stretching-induced orientation exerts no memory effect on the photoinduced reorientation, the direction of which is determined by the polarization of the visible light regardless of the mechanically induced orientation direction in the stretched film. Moreover, subsequent thermal annealing in the nematic phase leads to parallel orientation independently of the initial mechanically or photoinduced orientation direction. By contrast, the diblock copolymer displays a strong orientation memory effect. Regardless of the condition used, either for photoinduced reorientation or thermal annealing in the liquid crystalline phase, only the initial stretching-induced perpendicular orientation of azobenzene mesogens can be recovered. The reported findings provide new insight into the different orientation mechanisms, and help understand the important issue of orientation induction and control in azobenzene-containing SCLCPs. The second study presented in this thesis (Chapter 2) deals with supramolecular side-chain liquid crystalline polymers (S-SCLCPs), in which side-group mesogens are linked to the chain backbone through non-covalent interactions such as hydrogen bonding. Little is known about the mechanically induced orientation of mesogens in S-SCLCPs. In contrast to covalent SCLCPs, free-standing, solution-cast thin films of a S-SCLCP, built up with 4-(4’-heptylphenyl) azophenol (7PAP) H-bonded to poly(4-vinyl pyridine) (P4VP), display excellent stretchability. Taking advantage of this finding, we investigated the stretching-induced orientation and the viscoelastic behavior of this S-SCLCP, and the results revealed major differences between supramolecular and covalent SCLCPs. For covalent SCLCPs, the strong coupling between chain backbone and side-group mesogens means that the two constituents can mutually influence each other; the lack of chain entanglements is a manifestation of this coupling effect, which accounts for the difficulty in obtaining freestanding and mechanically stretchable films. Upon elongation of a covalent SCLCP film cast on a supporting film, the mechanical force acts on the coupled polymer backbone and mesogenic side groups, and the latter orients cooperatively and efficiently (high orientation degree), which, in turn, imposes an anisotropic conformation of the chain backbone (low orientation degree). In the case of the S-SCLCP of P4VP-7PAP, the coupling between the side-group mesogens and the chain backbone is much weakened owing to the dynamic dissociation/association of the H-bonds linking the two constituents. The consequence of this decoupling is readily observable from the viscoelastic behavior. The average molecular weight between entanglements is basically unchanged in both the smectic and isotropic phase, and is similar to non-liquid crystalline samples. As a result, the S-SCLCP can easily form freestanding and stretchable films. Furthermore, the stretching induced orientation behavior of P4VP-7PAP is totally different. Stretching in the smectic phase results in a very low degree of orientation of the side-group mesogens even at a large strain (500%), while the orientation of the main chain backbone develops steadily with increasing the strain, much the same way as amorphous polymers. The results imply that upon stretching, the mechanical force is mostly coupled to the polymer backbone and leads to its orientation, while the main chain orientation exerts little effect on orienting the H-bonded mesogenic side groups. This surprising finding is explained by the likelihood that during stretching in the smectic phase (at relatively higher temperatures) the dynamic dissociation of the H-bonds allow the side-group mesogens to be decoupled from the chain backbone and relax quickly. In the third project (Chapter 3), we investigated the shape memory properties of a S-SCLCP prepared by tethering two azobenzene mesogens, namely, 7PAP and 4-(4'-ethoxyphenyl) azophenol (2OPAP), to P4VP through H-bonding. The results revealed that, despite the dynamic nature of the linking H-bonds, the supramolecular SCLCP behaves similarly to covalent SCLCP by exhibiting a two-stage thermally triggered shape recovery process governed by both the glass transition and the LC-isotropic phase transition. The ability for the supramolecular SCLCP to store part of the strain energy above T[subscript g] in the LC phase enables the triple-shape memory property. Moreover, thanks to the azobenzene mesogens used, which can undergo trans-cis photoisomerization, exposure the supramolecular SCLCP to UV light can also trigger the shape recovery process, thus enabling the remote activation and the spatiotemporal control of the shape memory. By measuring the generated contractile force and its removal upon turning on and off the UV light, respectively, on an elongated film under constant strain, it seems that the optically triggered shape recovery stems from a combination of a photothermal effect and an effect of photoplasticization or of an order-disorder phase transition resulting from the trans-cis photoisomerization of azobenzene mesogens.
Resumo:
Purtscher-like retinopathy is associated with retinal hemorrhages and ischaemia probably due to the complement-mediated leukoembolization. It is a rare and severe angiopathy found in conditions such as acute pancreatitis. Case. We present a case of a 53-year-old man who presented with a Purtscher-like retinopathy associated with the development of acute pancreatitis in the context of a Klatskin tumour (a hilar cholangiocarcinoma). The ophthalmologic evaluation revealed the best corrected visual acuity (BCVA) of 20/32 in the right eye (RE) and of 20/40 in the left eye (LE); biomicroscopy of anterior segment showed scleral icterus and fundoscopy revealed peripapillary cotton-wool spots, optic disc edema, and RPE hypo- and hyperpigmentation in the middle peripheral retina in both eyes with an intraretinal hemorrhage in the LE. 15 months after the initial presentation, without ophthalmological treatment, there was an improvement of BCVA to 20/20 in both eyes and optical coherence tomography (OCT) revealed areas of reduction of retinal nerve fiber layer thickness corresponding to the previous cotton-wool spots. Conclusion. Purtscher-like retinopathy should not be neglected in complex clinical contexts. Its unclear pathophysiology determines an uncertain treatment strategy, but a meticulous follow-up is compulsory in order to avoid its severe complications.
Resumo:
Fold-and-thrust belts are prominent structures that occur at the front of compressional orogens. To unravel the tectonic and metamorphic evolution of such complexes, kinematic investigations, quantitative microstructural analysis and geothermometry (calcite–graphite, calcite–dolomite) were performed on carbonate mylonites from thrust faults of the Helvetic nappe stack in Central Switzerland. Paleo-isotherms of peak temperature conditions and cooling stages (fission track) of the nappe pile were reconstructed in a vertical section and linked with the microstructural and kinematic evolution. Mylonitic microstructures suggest that under metamorphic conditions close to peak temperature, strain was highly localized within thrust faults where deformation temperatures spatially continuously increased in both directions, from N to S within each nappe and from top–down in the nappe stack, covering a temperature range of 180–380 °C. Due to the higher metamorphic conditions, thrusting of the lowermost nappe, the Doldenhorn nappe, was accompanied by a much more pronounced nappe internal ductile deformation of carbonaceous rock types than was the case for the overlying Wildhorn- and Gellihorn nappes. Ongoing thrusting brought the Doldenhorn nappe closer to the surface. The associated cooling resulted in a freezing in of the paleo-isotherms of peak metamorphic conditions. Contemporaneous shearing localized in the basal thrust, initially still in the ductile deformation regime and finally as brittle faulting and cataclasis inducing ultimately an inverse metamorphic zonation. With ongoing exhumation and the formation of the Helvetic antiformal nappe stack, a bending of large-scale tectonic structures (thrusts, folds), peak temperature isotherms and cooling isotherms occurred. While this local bending can directly be attributed to active deformation underneath the section investigated up to times of 2–3 ma, a more homogeneous uplift of the entire region is suggested for the very late and still active exhumation stage.
Resumo:
Inbred strains of C5731 and NIH nice infected with the A/S strain of Plasmodium chaubaudi usually developed high parasitaemias but infections were rarely fatal in immunocompetent mice and in most mice the parasites could be eradicated within 53 days or less. The immune response of C57B1 and NTH mice to infection with the A/S strain of P. chabaudi was studied. The principle method used in this study for investigating the immune response of the mice was to examine the immunity conferred on syngeneic mice, either X-irradiated or non-irradiated, by transferring to them lymphoid cells or serum from immune or semi-immune donors. The lymphoid cell populations examined were unfractionated spleen cells, nylon wool column enriched subpopulations of thymus-derived lymphocytes (T cells) and the so-called bursa-derived lymphocytes (B cells), bone marrow cells and phagocytic cells. In the course of these experiments observations were made on the effect of X-irradiation on the subsequent growth and multiplication of the parasite. In addition, an in vitro assay for antibody-dependent cell mediated cytotoxicity was used to investigate the activity of splenic K cells during malaria infection. K cells are lymphoid cells which may include lymphocytes of an undefined category, but possess receptors for the Fc portion of antibody on their surface and have the ability to non-specifically lyse target cells coated in antibodies. a) The adoptive transfer of immunity to P.chabaudi with immune spleen cells. Spleen cells from mice which had previously been infected with P.chabaudi were able to confer some immunity on syngeneic mice which had been irradiated with 600 or 800 rads. The protection was detected as a shortened patent parasitaemia in immune cell recipients compared to controls. The early experiments indicated the value of using irradiated recipients rather than non-irradiated recipients. In irradiated mice, a) smaller numbers of immune cells were required to promote detectable immunity than in non-irradiated mice, b) there was an amplification of the difference in the duration of primary parasitaemias in recipients of immune cells and normal cells compared to non-irradiated mice and c) as the irradiated host is immunodepressed, the protective effect of donor cells can be examined with a reduced contribution by the hosts own immune system. An initial non-specific resistance to P.chabaudi infection was observed in irradiated mice, although the infection in most of these mice was subsequently more severe than in non-irradiated mice. The non-specific resistance could be reduced or abolished by injecting lymphoid cells into mice shortly after irradiation or by infecting irradiated mice more than 15 days after irradiation. Other workers suggest that following irradiation, the reticulo-endothelial system is stimulated at the time that the non-specific resistance to P.chabaudi was observed. b) the adoptive transfer of immunity in syngeneic mice with enriched subpopulations of splenic immune T cells, B. cells, bone marrow cells and phagocytes. Immunity to P.chabaudi could be adoptively transferred with enriched spleen subpopulations of immune T cells or immune B cells in mice which had been irradiated 600 or 300 rads. The protective effects of unfractionated immune cells was, however, usually better than that of either immune T or F cell subpopulations. In most experiments enriched immune T cell recipients were more likely to suffer relapsing patent parasitaemias than either enriched immune B cell recipients or unfractionated immune cell recipients. In one experiment a comparison was made of the course of P.chabaudi infection in mice which had been irradiated with either 600 rads or 300 rads and which received injections of different immune cells. A dose of 600 rads permits the immune system of mice to recover from the effects of irradiation, but a dose of 800 rads is lethal to mice unless lymphoid cells are injected after irradiation. It was found that in recipients of enriched immune T or B cells, which had been irradiated with 600 rads, the parasitaemia became subpatent before their equivalents irradiated with 800 rads, but that there was little difference in parasitaemias between recipients of unfractionated immune cells given 600 or 800 rads. Experiments in which enriched immune T cells and B cells were recombined and injected into syngeneic mice gave inconclusive results as to whether the immune subpopulations acted synergistically. Similar experiments in which immune subpopulations of lymphoid cells were recombined with normal subpopulations of lymphoid cells demonstrated that the latter cells did not enhance the protective effect of the former cells. Bone marrow cells from immune mice were able to confer some protection on syngeneic recipients, but were not as protective as enriched immune T cells or B cells. The results obtained in adoptive transfer experiments using phagocytic cells from the spleen of immune mice depended on the length of time spleen cells were incubated in petri-dishes at 37° C before harvesting the phagocytes. Using C57B1 mice, phagocytes harvested after 15 hours incubation were as protective as unfractionated immune cells in a cell transfer experiment, but phagocytes harvested after 16 hours incubation were not protective. Examination of NIH phagocytic cells after 2.5 hours incubation at 37°C, which were as protective as unfractionated immune spleen cells in a cell transfer experiment, demonstrated that the petri-dish adherent cells may have contained B lymphocytes. c) The passive transfer of immunity with serum from P.chabaudi infected mice. The passive transfer of serum from C57B1 mice which had been previously infected with P.chabaudi to normal or irradiated syngeneic mice demonstrated that the serum recipients were initially protected from infection. Irradiated mice, however, were delayed longer in the onset of parasitaemia compared to non-irradiated mice. Using NIH mice, sera were collected from unfractionated immune spleen cell recipients, enriched immune T cell recipients and normal spleen recipients on the 11th day of a P.chabaudi infection, just after peak parasitaemia, and also on the 14th day of infection. On day 14, all immune cells recipients and most of the enriched immune T cell recipients had become subpatent but all normal cell recipients still had patent infections. Sera collected from the different spleen cell recipients on the 11th day of infection and passively transferred to irradiated mice demonstrated little protection. Sera collected on the 14th day of infect ion, however, reflected the immune status of the donors in their protective properties in mice infected with P.chabaudi. The serum from unfractionated immune cell recipients was the most protective of the 3 sera when compared to normal NIH serum and the serum from enriched immune T cell recipients was slightly protective, but the serum from normal cell recipients produced an enhanced infection in mice infected with P.chabaudi. d) Antibody-dependent cell-mediated cytotoxicity of spleen cells in P.chabaudi infected mice. In a preliminary investigation of K cell activity in the spleens of P.chabaudi infected mice, it was found that there was an increased activity of K cells collected at around peak parasitaemia compared to the activity of K cells in non-infected mice, and that this increased activity could also be found in mice which had recently become subpatent. As the target cell for antibody-dependent cell-mediated cytotoxicity employed was the thick red blood cell, it is not known whether the K cell is involved in the killing of P.chabaudi parasites. These results suggest that both T cells and B cells and antibody may be important in the immune response to P.chabaudi in mice. Primed T cells may act as helper cells in the production of malarial antibodies, but, as enriched primed T cells could confer protection on immunodepressed mice, it is possible that a cell-mediated mechanism of immunity may also exist.
Resumo:
La demanda de una producción de alimentos cada vez mayor a nivel mundial sumado a la tecnificación y al ritmo acelerado del progreso de las explotaciones agropecuarias actuales hacen que el ganado deba soportar elevadas presiones de producción aumentando los requerimientos de nutrientes. Este es el caso de los minerales considerados actualmente elementos esenciales para los animales, aunque tradicionalmente fueron definidos como los nutrientes pobres de la nutrición y alimentación animal. Actualmente se ha demostrado con evidencia clínica y productiva, el importante rol metabólico de los minerales en el animal sano y productivo, como también se ha definido qué elemento mineral y porcentaje del mismo es requerido para el normal funcionamiento del organismo. Los macro-minerales (calcio, magnesio, fósforo, sodio, potasio, cloro y azufre) y los oligo-minerales (cobre, zinc, hierro, selenio, cobalto, iodo, manganeso, molibdeno y cromo) son elementos esenciales y necesarios para transformar la proteína y la energía de los alimentos en componentes del organismo o en productos animales como leche, carne, crías, piel, lana. Además, ayudan al organismo a combatir las enfermedades, manteniendo al animal en buen estado de salud. Se ha considerado a los minerales como el tercer grupo limitante en la nutrición animal, siendo a su vez, el que mayor potencial y menor costo tiene para incrementar la producción del ganado. Los minerales desempeñan funciones tan importantes como ser constituyentes de la estructura ósea y dental, de tejidos blandos y líquidos corporales. Están involucrados en el funcionamiento celular, siendo activadores de más de trescientas enzimas, constituyentes esenciales de vitaminas, hormonas y pigmentos respiratorios y facilitando la actividad de los microorganismos del rumen. Cuando el aporte de minerales en la ración no es el adecuado en calidad y/o cantidad se originan las deficiencias minerales, encuadradas dentro de las enfermedades metabólicas o enfermedades de la producción. Estas han sido informadas en casi todo el mundo y son responsables de importantes pérdidas económicas en los rodeos de bovinos para carne. Las deficiencias y/o desequilibrios minerales pueden causar los siguientes trastornos en los animales: bajo porcentaje de parición, mayor número de servicios por concepción, abortos, retenciones placentarias, incremento del intervalo entre partos, baja producción de leche, menor peso al nacimiento y al destete, menor porcentaje de destete, menor ganancia de peso, mayor incidencia de enfermedades infecciosas, fracturas espontáneas, diarrea, deformación de huesos y mortandad. Así cobra importancia el diagnóstico mediante el análisis de la sangre de los animales, del pasto y el agua que consumen y la caracterización de estas deficiencias en primarias o secundarias con el objetivo de poder realizar un control de las mismas mediante un adecuado plan de suplementación mineral acorde a las necesidades de los distintos establecimientos agropecuarios.
Resumo:
As teorias e políticas de desenvolvimento regional sofreram grandes alterações nas duas últimas décadas. Os factores que impulsionam o crescimento económico sustentado já não se relacionam apenas com o capital físico, nem sequer com o capital humano regional. As novas condições de competitividade enfatizam a importância do “capital social”, normas e regras sociais, formais ou informais que promovem a compreensão recíproca e a confiança mútuas entre os agentes da economia da região. Este artigo demonstra a forma como as instituições de uma região se podem organizar em torno dos processos de reestruturação produtiva e encorajar as empresas na região a adoptar normas, expectativas, valores, atitudes e práticas comuns, em suma, uma cultura comum de inovação reforçada pelo processo de aprendizagem social. A acção política dinamizada pela autarquia da Covilhã no projecto ReADAPT, a acção da Associação Nacional dos Industriais de Lanifícios ao promover as condições que sustentam e levam ao aparecimento de redes ou agrupamentos de empresas com actividades relacionadas nas áreas de maior potencial de desenvolvimento da região, e o estabelecimento de relações entre essas redes e as restantes instituições (centros de formação, universidade, sindicatos, etc.) constituem o chamado Sistema Regional de Inovação deste território. Num contexto de depressão económica sectorial e regional, o papel da ANIL e das restantes entidades parceiras assumiu-se como de “animadores e facilitadores” do desenvolvimento. A aprendizagem e a reflexão institucional conseguidas contribuíram também para o que ANIL e as restantes entidades parceiras e o sector público com o qual interagem, tenham adquirido uma nova capacidade de inovação estratégica. Neste contexto, instituições de carácter regional/local assumem-se como um elemento essencial na construção de racionalidades e no condicionamento de comportamentos reflexivos e de cooperação, indicando os caminhos possíveis a seguir aos restantes actores da região. Em suma, as dinâmicas de associação entre actores regionais são um ingrediente fundamental na receita para o desenvolvimento das regiões, no sentido em que podem ajudar outros a ajudar-se na criação de significados, na construção de capacidade para agir e no suporte à construção de redes através das quais os agentes económicos e sociais podem colaborar em benefício comum.
Resumo:
Statistically stationary and homogeneous shear turbulence (SS-HST) is investigated by means of a new direct numerical simulation code, spectral in the two horizontal directions and compact-finite-differences in the direction of the shear. No remeshing is used to impose the shear-periodic boundary condition. The influence of the geometry of the computational box is explored. Since HST has no characteristic outer length scale and tends to fill the computational domain, long-term simulations of HST are “minimal” in the sense of containing on average only a few large-scale structures. It is found that the main limit is the spanwise box width, Lz, which sets the length and velocity scales of the turbulence, and that the two other box dimensions should be sufficiently large (Lx ≳ 2Lz, Ly ≳ Lz) to prevent other directions to be constrained as well. It is also found that very long boxes, Lx ≳ 2Ly, couple with the passing period of the shear-periodic boundary condition, and develop strong unphysical linearized bursts. Within those limits, the flow shows interesting similarities and differences with other shear flows, and in particular with the logarithmic layer of wall-bounded turbulence. They are explored in some detail. They include a self-sustaining process for large-scale streaks and quasi-periodic bursting. The bursting time scale is approximately universal, ∼20S−1, and the availability of two different bursting systems allows the growth of the bursts to be related with some confidence to the shearing of initially isotropic turbulence. It is concluded that SS-HST, conducted within the proper computational parameters, is a very promising system to study shear turbulence in general.
Resumo:
Wool production and reproductive performance components of similar genotypes, brought from distinct production areas, were evaluated during five years trial at similar environments, such as, joining season and stocking rate on winter improved pasture. The least squares means revealed that the origin (breed) effect concentrated upon the Corriedale ewes wool production, whereas in Romney females it affected the reproductive performance.
Resumo:
Although there are a wide variety of additives that act in fresh state, to adjust the properties of cement, there is also a search by additions that improve the tenacity of the cement in the hardened state. This, in turn, can often be increased by inserting fibers, which act on the deflection of microcracks. This study aimed to use a microfiber glass wool (silica-based) as an additive reinforcing the cement matrix, improving the rupture tenacity, in order to prevent the propagation of microcracks in the cement sheath commonly found in oil wells submitted to high temperatures. The fibers were added at different concentrations, 2 to 5% (BWOC) and varied average sizes, grinding for 90 s, 180 s, 300 s, 600 s. The cement slurries were made with a density of 1,90 g/ cm3 (15,6 lb/gal), using Portland cement CPP- Special Class as the hydraulic binder and 40% silica flour. The characterization of the fiber was made by scanning electron microscopy (SEM), particle size by sieving, X-ray fluorescence (XRF), X-ray diffraction (XRD) and thermogravimetry (TG / DTG). Were performed technological tests set by the API (American Petroleum Institute) by rheology, stability, free water, compressive strength, as well as testing rupture energy, elastic modulus and permeability. The characterization results showed good thermal stability of the microfiber glass wool for application in oil wells submitted to steam injection and, also, that from the particle size data, it was possible to suggest that microfibers milled up to 300 s, are ideal to act as reinforcement to the cement slurries. The rheological parameters, there was committal of plastic viscosity when larger lengths were inserted of microfiber (F90). The values obtained by free water and stability were presented according to API. The mechanical properties, the incorporation of microfiber to the cement slurries gave better rupture tenacity, as compared to reference cement slurries. The values of compressive strength, elastic modulus and permeability have been maintained with respect to the reference cement slurries. Thus, cement slurries reinforced with microfiber glass wool can ensure good application for cementing oil wells submitted to steam injection, which requires control of microcracks, due to the thermal gradients
Resumo:
Background: Alterations in intestinal microbiota have been correlated with a growing number of diseases. Investigating the faecal microbiota is widely used as a non-invasive and ethically simple proxy for intestinal biopsies. There is an urgent need for collection and transport media that would allow faecal sampling at distance from the processing laboratory, obviating the need for same-day DNA extraction recommended by previous studies of freezing and processing methods for stool. We compared the faecal bacterial DNA quality and apparent phylogenetic composition derived using a commercial kit for stool storage and transport (DNA Genotek OMNIgene GUT) with that of freshly extracted samples, 22 from infants and 20 from older adults. Results: Use of the storage vials increased the quality of extracted bacterial DNA by reduction of DNA shearing. When infant and elderly datasets were examined separately, no differences in microbiota composition were observed due to storage. When the two datasets were combined, there was a difference according to a Wilcoxon test in the relative proportions of Faecalibacterium, Sporobacter, Clostridium XVIII, and Clostridium XlVa after 1 week's storage compared to immediately extracted samples. After 2 weeks' storage, Bacteroides abundance was also significantly different, showing an apparent increase from week 1 to week 2. The microbiota composition of infant samples was more affected than that of elderly samples by storage, with significantly higher Spearman distances between paired freshly extracted and stored samples (p
Resumo:
Résumé : Cette juxtaposition de matériaux solides -blocs, pierres ou briques,...- liés ou non entre eux que nous appelons maçonnerie ne se comporte pas très bien vis-à-vis des forces latérales, surtout si elle n’a pas été réalisée suivant les normes parasismiques ou de façon adéquate. Cette vulnérabilité (glissement, cisaillement, déchirure en flexion, ou tout autre) vient souvent du fait même de ce processus d’empilement, des problèmes d’interaction avec le reste de la structure et aussi à cause des caractéristiques mécaniques peu fiables de certains éléments utilisés. Malgré cette défaillance structurale, la maçonnerie est encore utilisée aujourd’hui grâce à son côté traditionnel, sa facilité de mise en œuvre et son coût d’utilisation peu élevé. Depuis quelques années, la maçonnerie s’est enrichie de documents qui ont été publiés par divers chercheurs dans le but d’une meilleure compréhension des caractéristiques mécaniques des éléments et aussi, et surtout, des mécanismes de rupture des murs de maçonnerie pour une meilleure réponse face aux sollicitations sismiques. Beaucoup de programmes expérimentaux ont alors été effectués et tant d’autres sont encore nécessaires. Et c’est dans ce contexte que cette recherche a été conduite. Elle présentera, entre autres, le comportement sous charges latérales d’un mur en maçonnerie armée entièrement rempli de coulis. Ce projet de recherche fait partie d’un programme plus large visant à une meilleure connaissance du comportement sismique de la maçonnerie pour une amélioration des techniques de construction et de réparation des ouvrages en maçonnerie.
Resumo:
Résumé : Cette étude examine l'impact de la taille et de la gradation de particules sur les corrélations théoriques et empiriques existantes les plus connues entre la résistance au cisaillement et le comportement dilatatant des matériaux granulaires en condition de déformation plane et en compression triaxiale drainée. À cette fin, 276 tests de cisaillements symétriques directs et 35 tests de compressions triaxiales drainées ont été menés sur des échantillons composés de billes de basalte (particules rondes), et de sables constitués de particules angulaires (sable de Péribonka et sable d'Eastmain) sur une échelle de 63 µm à 2000 µm afin d'évaluer leur résistance au cisaillement et leur comportement de dilatance sur une vaste échelle de pressions normales et de densités relatives initiales. Premièrement, la fiabilité et l'applicabilité des limites de mesure à l’aide de tests physiques de cisaillements symétriques directs dans l'interprétation de la résistance au cisaillement frictionnel en déformation plane des matériaux granulaires ont été discutées et confirmées par l'usage du code informatique DEM, SiGran. L'accent a été particulièrement mis sur la validation du modèle DEM au moyen de comparaison des résultats des simulations DEM avec leurs équivalents physiques à une échelle macro. Les résultats virtuels DSA sont abordés du point de vue de la coaxialité entre les principales tensions et les principales directions des paliers de pression ainsi que de la déviation de la direction d'extension nulle à partir de la direction horizontale. Les résultats numériques fournissent également des données quantitatives sur les différentes formes d'énergie consommées durant le cisaillement confirmées par d'autres résultats physiques et numériques publiés. Sur la base des postulats précédents, un examen minutieux des résultats des essais de cisaillements directs et de données issues de la littérature a été accompli afin d'évaluer la fiabilité des formules empiriques bien connues de Bolton et Collins et al. avec leurs constantes couramment employées en condition de déformation plane. L'étude montre qu'une application des relations empiriques de force-dilatation de cisaillement avec les constantes proposées par Bolton (1986) et Collins et al. (1992) aux sables ayant une distribution de taille de particules différente peut conduire à surestimer leurs valeurs en terme de force de cisaillement. Dans cette étude, les coefficients des équations de Bolton et Collins et al. ont donc été ajustée afin de prendre en compte les caractéristiques des particules, en particulier le diamètre médian, D50. De manière analogue, les effets microstructuraux imposés par la géométrie interne des particules (par exemple la taille, la forme et la gradation des particules) sur la relation tension-dilatation très connue, celle de Rowe (1962), et son ajustement empirique en condition triaxiale drainée ont été examinés dans cette étude. Une comparaison des prédictions des formules proposées avec les données de force de cisaillement issues de la littérature fournit de nombreuses preuves en faveur des contraintes mises en place au sein des relations existantes de force-dilatation de cisaillement en condition de déformation plane et triaxiale. Ces comparaisons prouvent également que la prise en compte de la taille des grains conduit à des résultats plus tangibles que lorsque la taille de la particule n'est pas considérée. Les formules de force-dilatation ajustées peuvent se révéler avantageuses pour évaluer indépendamment la cohérence des forces de cisaillement déterminées expérimentalement et pour introduire des lois d’écoulement plus précises dans les analyses géotechniques analytiques et numériques.
Resumo:
The late Paleozoic collision between Gondwana and Laurussia resulted in the polyphase deformation and magmatism that characterizes the Iberian Massif of the Variscan orogen. In the Central Iberian Zone, initial con- tinental thickening (D1; folding and thrusting) was followed by extensional orogenic collapse (D2) responsible for the exhumation of high-grade rocks coeval to the emplacement of granitoids. This study presents a tectonometamorphic analysis of the Trancoso-Pinhel region (Central Iberian Zone) to ex- plain the processes in place during the transition froman extension-dominated state (D2) to a compression-dom- inated one (D3).Wereveal the existence of low-dipping D2 extensional structures later affected by several pulses of subhorizontal shortening, each of them typified by upright folds and strike-slip shearing (D3, D4 and D5, as identified by superimposition of structures). The D2 Pinhel extensional shear zone separates a low-grade domain from an underlying high-grade domain, and it contributed to the thermal reequilibration of the orogen by facil- itating heat advection from lower parts of the crust, crustal thinning, decompression melting, and magma intru- sion. Progressive lessening of the gravitational disequilibrium carried out by this D2 shear zone led to a switch from subhorizontal extension to compression and the eventual cessation and capture of the Pinhel shear zone by strike-slip tectonics during renewed crustal shortening. High-grade domains of the Pinhel shear zone were folded together with low-grade domains to define the current upright folded structure of the Trancoso-Pinhel re- gion, the D3 Tamames-Marofa-Sátão synform. Newdating of syn-orogenic granitoids (SHRIMP U\\Pb zircon dat- ing) intruding the Pinhel shear zone, together with the already published ages of early extensional fabrics constrain the functioning of this shear zone to ca. 331–311 Ma, with maximum tectonomagmatic activity at ca. 321–317 Ma. The capture and apparent cessation of movement of the Pinhel shear zone occurred at ca. 317– 311 Ma.