Stress – structure correlations in grafted polymer films

In der vorliegenden Arbeit wurden experimentelle Untersuchungen zu gepfropften Polymerfilmen durchgeführt. Dabei wurden endgepfropfte poly-methyl-methacrylate (PMMA) Bürsten hergestellt durch „grafting from“ Methoden und polystyrol (PS)/ poly-vinyl-methyl-ether (PVME) Polymerfilme gepfropft auf UV sensitiven Oberflächen untersucht. Zur Strukturuntersuchung wurden die hergestellten Systeme wurden mit Rasterkraftmikroskopie (engl.: Surface Probe Microscopy, SPM), Röntgen - und Neutronenreflektivitätsmessungen, sowie mit Röntgenstreuung unter streifenden Einfall (engl.: Grazing Incidence Small Angle X-Ray Scattering, GISAXS) untersucht. rnEs wurde gezeigt, dass ein aus der Transmissionsstreuung bekanntes Model auch für auch für die GISAXS Analyse polydisperser Polymerdomänen und Kolloidsysteme verwendet werden kann. Der maximale Fehler durch die gemachten Näherungen wurde auf < 20% abgeschätzt.rnErgebnisse aus der Strukturanalyse wurden mit mechanischen Filmeigenschaften verknüpft. Dazu wurden mechanische Spannungsexperimente durchgeführt. Hierzu wurden die zu untersuchenden Filme selektiv auf einzelne Mikro-Federbalken-Sensoren (engl.: Micro Cantilever Sensor, MCS) der MCS Arrays aufgebracht. Dies wurde durch Maskierungstechniken und Mikro-Kontaktdrucken bewerkstelligt. rnPhasenübergansexperimente der gepfropften PS/PVME Filme haben gezeigt, dass die Möglichkeit einer Polymer/Polymer Phasenseparation stark von Propfpunktdichte der gebundenen Polymerketten mit der Oberfläche abhängt. PS/PVME Filmsysteme mit hohen Pfropfpunktdichten zeigten keinen Phasenübergang. Bei niedrig gepfropften Filmsystemen waren hingegen Polymer/Polymer Phasenseparationen zu beobachten. Es wurde geschlussfolgert, dass die gepfropften Polymersysteme einen hinreichenden Grad an entropischen Freiheitsgraden benötigen um eine Phasenseparation zu zeigen. Mechanische Spannungsexperimente haben dabei das Verstehen der Phasenseparationsmechanismen möglich gemacht.rnAus Quellexperimenten dichtgepfropfter PMMA Bürsten, wurden Lösungsmittel-Polymer Wechselwirkungsparameter (-Parameter) bestimmt. Dabei wurde festgestellt, dass sich die erhaltenen Parameter aufgrund von Filmbenetzung und entropischen Effekten maßgeblich von den errechneten Bulkwerten unterscheiden. Weiterhin wurden nicht reversible Kettenverschlaufungseffekt beobachtet.

Corso-laboratorio pls "l'esperimento piu bello": Analisi di un'esperienza di insegnamento/apprendimento della fisica quantistica

In questo elaborato sono stati analizzati i dati raccolti nel Corso-Laboratorio “L’esperimento più bello”, realizzato nel periodo marzo-aprile 2013 nell'ambito delle attività del Piano Lauree Scientifiche del Dipartimento di Fisica e Astronomia di Bologna. Il Corso, frequentato da studenti volontari del quinto anno di Liceo Scientifico, era finalizzato ad introdurre concetti di Fisica Quantistica seguendo, come filo conduttore, l’esperimento di interferenza con elettroni singoli e le sue varianti. I principali dati considerati e analizzati riguardano le risposte degli studenti a questionari proposti a fine Corso per avere un riscontro sul tipo di coinvolgimento e sul livello di comprensione raggiunto. L’analisi è stata condotta con l’obiettivo specifico di valutare come gli studenti si siano posti di fronte ad alcuni approfondimenti formali sviluppati per interpretare gli esperimenti e come abbiano colto i concetti trattati, ritenuti necessari per entrare nel “nuovo modo di vedere il mondo della quantistica”: il concetto di stato, sovrapposizione, ampiezza di probabilità, entanglement.

Fluxus. Prima, durante, dopo

Fluxus è stato definito il più radicale e sperimentale movimento artistico degli anni Sessanta. Dalla prima comparsa ad oggi è stato osannato, analizzato, dimenticato e riscoperto molte volte, tuttora però rimane una delle più grandi incognite critiche della storia dell’arte del Novecento. La ricerca si sviluppa secondo uno schema tripartito: indagare origini, ascendenze e ispirazioni; collocare e contestualizzare il periodo di nascita e sviluppo; esaminare influenze e lasciti. Attraverso un confronto di manifesti, scritti autografi e opere si è cercato di verificare punti di contatto e di continuità tra Fluxus e le Avanguardie Storiche, con particolare riferimento a Futurismo e Dadaismo. Successivamente si è cercato di ricostruire le dinamiche che hanno portato, alla fine degli anni Cinquanta, al definirsi di un terreno fertile dal quale sono germinate esperienze strettamente legate quali Happening, Performance Art e lo stesso Fluxus, del quale si sono ripercorsi i cosiddetti “anni eroici” per evidenziarne le caratteristiche salienti. Nella terza sezione sono state individuate diverse ipotesi di continuazione dell’attitudine Fluxus, dal percorso storico-filologico dei precoci tentativi di musealizzazione, alle eredità dirette e indirette sulle generazioni successive di artisti, fino alla individuazione di idee e concetti la cui attualità rende Fluxus un elemento imprescindibile per la comprensione della cultura contemporanea.

Correlations and Quantum Dynamics of 1D Fermionic Models: New Results for the Kitaev Chain with Long-Range Pairing

In the first part of the thesis, we propose an exactly-solvable one-dimensional model for fermions with long-range p-wave pairing decaying with distance as a power law. We studied the phase diagram by analyzing the critical lines, the decay of correlation functions and the scaling of the von Neumann entropy with the system size. We found two gapped regimes, where correlation functions decay (i) exponentially at short range and algebraically at long range, (ii) purely algebraically. In the latter the entanglement entropy is found to diverge logarithmically. Most interestingly, along the critical lines, long-range pairing breaks also the conformal symmetry. This can be detected via the dynamics of entanglement following a quench. In the second part of the thesis we studied the evolution in time of the entanglement entropy for the Ising model in a transverse field varying linearly in time with different velocities. We found different regimes: an adiabatic one (small velocities) when the system evolves according the instantaneous ground state; a sudden quench (large velocities) when the system is essentially frozen to its initial state; and an intermediate one, where the entropy starts growing linearly but then displays oscillations (also as a function of the velocity). Finally, we discussed the Kibble-Zurek mechanism for the transition between the paramagnetic and the ordered phase.

Exploring Quantum Speed-up Through Cluster-state Computers

The aim of this thesis is to investigate the nature of quantum computation and the question of the quantum speed-up over classical computation by comparing two different quantum computational frameworks, the traditional quantum circuit model and the cluster-state quantum computer. After an introductory survey of the theoretical and epistemological questions concerning quantum computation, the first part of this thesis provides a presentation of cluster-state computation suitable for a philosophical audience. In spite of the computational equivalence between the two frameworks, their differences can be considered as structural. Entanglement is shown to play a fundamental role in both quantum circuits and cluster-state computers; this supports, from a new perspective, the argument that entanglement can reasonably explain the quantum speed-up over classical computation. However, quantum circuits and cluster-state computers diverge with regard to one of the explanations of quantum computation that actually accords a central role to entanglement, i.e. the Everett interpretation. It is argued that, while cluster-state quantum computation does not show an Everettian failure in accounting for the computational processes, it threatens that interpretation of being not-explanatory. This analysis presented here should be integrated in a more general work in order to include also further frameworks of quantum computation, e.g. topological quantum computation. However, what is revealed by this work is that the speed-up question does not capture all that is at stake: both quantum circuits and cluster-state computers achieve the speed-up, but the challenges that they posit go besides that specific question. Then, the existence of alternative equivalent quantum computational models suggests that the ultimate question should be moved from the speed-up to a sort of “representation theorem” for quantum computation, to be meant as the general goal of identifying the physical features underlying these alternative frameworks that allow for labelling those frameworks as “quantum computation”.

Classical and quantum aspects of black hole dynamics

Il contenuto fisico della Relatività Generale è espresso dal Principio di Equivalenza, che sancisce l'equivalenza di geometria e gravitazione. La teoria predice l'esistenza dei buchi neri, i più semplici oggetti macroscopici esistenti in natura: essi sono infatti descritti da pochi parametri, le cui variazioni obbediscono a leggi analoghe a quelle della termodinamica. La termodinamica dei buchi neri è posta su basi solide dalla meccanica quantistica, mediante il fenomeno noto come radiazione di Hawking. Questi risultati gettano una luce su una possibile teoria quantistica della gravitazione, ma ad oggi una simile teoria è ancora lontana. In questa tesi ci proponiamo di studiare i buchi neri nei loro aspetti sia classici che quantistici. I primi due capitoli sono dedicati all'esposizione dei principali risultati raggiunti in ambito teorico: in particolare ci soffermeremo sui singularity theorems, le leggi della meccanica dei buchi neri e la radiazione di Hawking. Il terzo capitolo, che estende la discussione sulle singolarità, espone la teoria dei buchi neri non singolari, pensati come un modello effettivo di rimozione delle singolarità. Infine il quarto capitolo esplora le ulteriori conseguenze della meccanica quantistica sulla dinamica dei buchi neri, mediante l'uso della nozione di entropia di entanglement.

Nonlinearity as a resource for nonclassicality

Lo scopo di questo lavoro è cercare un'evidenza quantitativa a supporto dell'idea idea che la nonlinearità sia una risorsa per generare nonclassicità. Ci si concentrerà su sistemi unidimensionali bosonici, cercando soprattutto di connettere la nonlinearità di un oscillatore anarmonico, definito dalla forma del suo potenziale, alla nonclassicità del relativo ground state. Tra le numerose misure di nonclassicità esistenti, verranno impiegate il volume della parte negativa della funzione di Wigner e l'entanglement potential, ovvero la misura dell'entanglement prodotto dallo stato dopo il passaggio attraverso un beam splitter bilanciato avente come altro stato in ingresso il vuoto. La nonlinearità di un potenziale verrà invece caratterizzata studiando alcune proprietà del suo ground state, in particolare se ne misurerà la non-Gaussianità e la distanza di Bures rispetto al ground state di un oscillatore armonico di riferimento. Come principale misura di non-Gaussianità verrà utilizzata l'entropia relativa fra lo stato e il corrispettivo stato di riferimento Gaussiano, avente la medesima matrice di covarianza. Il primo caso che considereremo sarà quello di un potenziale armonico con due termini polinomiali aggiuntivi e il ground state ottenuto con la teoria perturbativa. Si analizzeranno poi alcuni potenziali il cui ground state è ottenibile analiticamente: l'oscillatore armonico modificato, il potenziale di Morse e il potenziale di Posch-Teller. Si andrà infine a studiare l'effetto della nonlinearità in un contesto dinamico, considerando l'evoluzione unitaria di uno stato in ingresso in un mezzo che presenta una nonlinearità di tipo Kerr. Nell'insieme, i risultati ottenuti con tutti i potenziali analizzati forniscono una forte evidenza quantitativa a supporto dell'idea iniziale. Anche i risultati del caso dinamico, dove la nonlinearità costituisce una risorsa utile per generare nonclassicità solo se lo stato iniziale è classico, confermano la pittura complessiva. Si sono inoltre studiate in dettaglio le differenze nel comportamento delle due misure di nonclassicità.

Dynamics of the Heisenberg XXZ model across the ferromagnetic transition

In questa tesi viene presentata un'analisi numerica dell'evoluzione dinamica del modello di Heisenberg XXZ, la cui simulazione è stata effettuata utilizzando l'algoritmo che va sotto il nome di DMRG. La transizione di fase presa in esame è quella dalla fase paramagnetica alla ferromagnetica: essa viene simulata in una catena di 12 siti per vari tempi di quench. In questo modo si sono potuti esplorare diversi regimi di transizione, da quello istantaneo al quasi-adiabatico. Come osservabili sono stati scelti l'entropia di entanglement, la magnetizzazione di mezza catena e lo spettro dell'entanglement, particolarmente adatti per caratterizzare la fisica non all'equilibrio di questo tipo di sistemi. Lo scopo dell'analisi è tentare una descrizione della dinamica fuori dall'equilibrio del modello per mezzo del meccanismo di Kibble-Zurek, che mette in relazione la sviluppo di una fase ordinata nel sistema che effettua la transizione quantistica alla densità di difetti topologici, la cui legge di scala è predicibile e legata agli esponenti critici universali caratterizzanti la transizione.

Dissonance as a resource for probing the qubit depolarizing channel

Quantum channel identification, a standard problem in quantum metrology, is the task of estimating parameter(s) of a quantum channel. We investigate dissonance (quantum discord in the absence of entanglement) as an aid to quantum channel identification and find evidence for dissonance as a resource for quantum information processing. We consider the specific case of dissonant Bell-diagonal probes of the qubit depolarizing channel, using quantum Fisher information as a measure of statistical information extracted by the probe. In this setting dissonant quantum probes yield more statistical information about the depolarizing probability than do corresponding probes without dissonance and greater dissonance yields greater information. This effect only operates consistently when we control for classical correlation between the probe and its ancilla and the joint and marginal purities of the ancilla and probe.

Quantum Energy Teleportation Between Spin Particles in a Gibbs State

Energy in a multipartite quantum system appears from an operational perspective to be distributed to some extent non-locally because of correlations extant among the system's components. This non-locality allows users to transfer, in effect, locally accessible energy between sites of different system components by local operations and classical communication (LOCC). Quantum energy teleportation is a three-step LOCC protocol, accomplished without an external energy carrier, for effectively transferring energy between two physically separated, but correlated, sites. We apply this LOCC teleportation protocol to a model Heisenberg spin particle pair initially in a quantum thermal Gibbs state, making temperature an explicit parameter. We find in this setting that energy teleportation is possible at any temperature, even at temperatures above the threshold where the particles' entanglement vanishes. This shows for Gibbs spin states that entanglement is not fundamentally necessary for energy teleportation; correlation other than entanglement can suffice. Dissonance-quantum correlation in separable states-is in this regard shown to be a quantum resource for energy teleportation, more dissonance being consistently associated with greater energy yield. We compare energy teleportation from particle A to B in Gibbs states with direct local energy extraction by a general quantum operation on B and find a temperature threshold below which energy extraction by a local operation is impossible. This threshold delineates essentially two regimes: a high temperature regime where entanglement vanishes and the teleportation generated by other quantum correlations yields only vanishingly little energy relative to local extraction and a second low-temperature teleportation regime where energy is available at B only by teleportation.

Strong Local Passivity in Finite Quantum Systems

Passive states of quantum systems are states from which no system energy can be extracted by any cyclic (unitary) process. Gibbs states of all temperatures are passive. Strong local (SL) passive states are defined to allow any general quantum operation, but the operation is required to be local, being applied only to a specific subsystem. Any mixture of eigenstates in a system-dependent neighborhood of a nondegenerate entangled ground state is found to be SL passive. In particular, Gibbs states are SL passive with respect to a subsystem only at or below a critical system-dependent temperature. SL passivity is associated in many-body systems with the presence of ground state entanglement in a way suggestive of collective quantum phenomena such as quantum phase transitions, superconductivity, and the quantum Hall effect. The presence of SL passivity is detailed for some simple spin systems where it is found that SL passivity is neither confined to systems of only a few particles nor limited to the near vicinity of the ground state.

Applications of finite geometries to designs and codes

This dissertation concerns the intersection of three areas of discrete mathematics: finite geometries, design theory, and coding theory. The central theme is the power of finite geometry designs, which are constructed from the points and t-dimensional subspaces of a projective or affine geometry. We use these designs to construct and analyze combinatorial objects which inherit their best properties from these geometric structures. A central question in the study of finite geometry designs is Hamada’s conjecture, which proposes that finite geometry designs are the unique designs with minimum p-rank among all designs with the same parameters. In this dissertation, we will examine several questions related to Hamada’s conjecture, including the existence of counterexamples. We will also study the applicability of certain decoding methods to known counterexamples. We begin by constructing an infinite family of counterexamples to Hamada’s conjecture. These designs are the first infinite class of counterexamples for the affine case of Hamada’s conjecture. We further demonstrate how these designs, along with the projective polarity designs of Jungnickel and Tonchev, admit majority-logic decoding schemes. The codes obtained from these polarity designs attain error-correcting performance which is, in certain cases, equal to that of the finite geometry designs from which they are derived. This further demonstrates the highly geometric structure maintained by these designs. Finite geometries also help us construct several types of quantum error-correcting codes. We use relatives of finite geometry designs to construct infinite families of q-ary quantum stabilizer codes. We also construct entanglement-assisted quantum error-correcting codes (EAQECCs) which admit a particularly efficient and effective error-correcting scheme, while also providing the first general method for constructing these quantum codes with known parameters and desirable properties. Finite geometry designs are used to give exceptional examples of these codes.

Moving Beyond Hastiness and Superficiality: Being an Ethical Technical Communicator via Digital Communication Technologies in Health Care

This thesis examines digital technologies used by technical communicators in healthcare settings. I show that technical communicators, who function as users, advocators and evaluators, need a useable framework for ethical engagement with digital technologies, which integrally affect the physician-patient relationship. Therefore, I apply rhetorical methodology by producing useable knowledge and phenomenological methodology by examining lived experiences of technical communicators. Substantiation comes from theories spanning technical communication, philosophy, and composition studies. Evidence also emerges from qualitative interviews with communication professionals working in healthcare; my concerns arise from personal experiences with electronic recordkeeping in the exam room. This thesis anticipates challenging the presumed theory-practice divide while encouraging greater disciplinary reciprocity. Because technical communication infuses theory into productive capacity, this thesis presents the tripartite summons of the ethical technical communicator: to exercise critically-reflective action that safeguards the physician-patient relationship by ways of using digital technologies, advocating for audiences, and evaluating digital technologies.

Structural analysis of B-Box 2 from MuRF1: identification of a novel self-association pattern in a RING-like fold

The B-box motif is the defining feature of the TRIM family of proteins, characterized by a RING finger-B-box-coiled coil tripartite fold. We have elucidated the crystal structure of B-box 2 (B2) from MuRF1, a TRIM protein that supports a wide variety of protein interactions in the sarcomere and regulates the trophic state of striated muscle tissue. MuRF1 B2 coordinates two zinc ions through a cross-brace alpha/beta-topology typical of members of the RING finger superfamily. However, it self-associates into dimers with high affinity. The dimerization pattern is mediated by the helical component of this fold and is unique among RING-like folds. This B2 reveals a long shallow groove that encircles the C-terminal metal binding site ZnII and appears as the defining protein-protein interaction feature of this domain. A cluster of conserved hydrophobic residues in this groove and, in particular, a highly conserved aromatic residue (Y133 in MuRF1 B2) is likely to be central to this role. We expect these findings to aid the future exploration of the cellular function and therapeutic potential of MuRF1.

A STUDY ON THE FEASIBILITY OF UNIVERSAL CHIP CONTROL IN MACHINING

A novel solution to the long standing issue of chip entanglement and breakage in metal cutting is presented in this dissertation. Through this work, an attempt is made to achieve universal chip control in machining by using chip guidance and subsequent breakage by backward bending (tensile loading of the chip's rough top surface) to effectively control long continuous chips into small segments. One big limitation of using chip breaker geometries in disposable carbide inserts is that the application range is limited to a narrow band depending on cutting conditions. Even within a recommended operating range, chip breakers do not function effectively as designed due to the inherent variations of the cutting process. Moreover, for a particular process, matching the chip breaker geometry with the right cutting conditions to achieve effective chip control is a very iterative process. The existence of a large variety of proprietary chip breaker designs further exacerbates the problem of easily implementing a robust and comprehensive chip control technique. To address the need for a robust and universal chip control technique, a new method is proposed in this work. By using a single tool top form geometry coupled with a tooling system for inducing chip breaking by backward bending, the proposed method achieves comprehensive chip control over a wide range of cutting conditions. A geometry based model is developed to predict a variable edge inclination angle that guides the chip flow to a predetermined target location. Chip kinematics for the new tool geometry is examined via photographic evidence from experimental cutting trials. Both qualitative and quantitative methods are used to characterize the chip kinematics. Results from the chip characterization studies indicate that the chip flow and final form show a remarkable consistency across multiple levels of workpiece and tool configurations as well as cutting conditions. A new tooling system is then designed to comprehensively break the chip by backward bending. Test results with the new tooling system prove that by utilizing the chip guidance and backward bending mechanism, long continuous chips can be more consistently broken into smaller segments that are generally deemed acceptable or good chips. It is found that the proposed tool can be applied effectively over a wider range of cutting conditions than present chip breakers thus taking possibly the first step towards achieving universal chip control in machining.