ANALISE FAMILIAL DO COMPORTAMENTO IN VITRO DOS MACROFAGOS HUMANOS FRENTE AO MYCOBACTERIUM LEPRAE

The lysogenic capacity of human macrophages facing M. leprae in vitro may be dependent on an important genetic component. Although the familial aggregation of the trait is demonstrated, this is a necessary but not sufficient condition to prove genetic influence. The data do not fit some simple genetic models (autosomal dominant or incompletely dominant gene; dominant or recessive sex-linked gene). The results obtained are consistent with the hypothesis that the macrophages' lysogenic capacity is mainly due to a major gene with variable expressivity. This hypothesis may be too simple to account for the whole variability detected and therefore must be considered a working hypothesis.

Comportamento espacial da cultura canavieira no Estado de Sao Paulo, 1980

Data from the agricultural and Cattle Raising Census for 1980 show that most of the sugar cane producing counties lie in the administrative regions of Campinas, Ribeirao Preto and Sao Jose do Rio Preto. A comparison with the 1975 data shows two important facts; 1) an increase of the cultivated area in 118 counties and 2) an increase in the number of counties with area under sugar cane. There was also an expansion in the sub-regions of Catanduva, Assis and Ourinhos. Nevertheless, Piracicaba, Araraquara, Ribeirao Preto, Jaboticabal and Jau, have continued to be important sugar cane producing nuclei in the State since 1960. -from English summary

Comportamento dos tecidos periapicais de dentes de cães após a obturação de canal com Sealapex acrescido ou não de iodoformio.

Some endodontists use iodoform in Sealapex in order to rend it more radiopac. This procedure is empiric and for this reason we decided to observe, histologically, if the iodoform introduces some modification in the biological properties of Sealapex. Thirty root canals of dogs' teeth were overinstrumented and filled, by lateral condensation technique, with gutta percha points and Sealapex, with or without iodoform. The iodoform was added in two different proportions: 30 mg or 112 mg for one centimeter of the base and one centimeter of the catalyst of Sealapex. The pieces were removed for histological studies, 6 months after the treatment. The histological results showed that Sealapex encourages apical closure by cementum deposition and that the addition of iodoform does not change that biological property.

Efeito do envelhecimento sobre o comportamento mecânico dos músculos papilares de ratos Wistar.

PURPOSE--To evaluate the effects of age on mechanical performance of rat myocardium. METHODS--Left ventricular papillary muscles were isolated from male Wistar rats at 1, 3, 6 and 12 months of age. Muscles were studied isometrically and isotonically, stimulated at 0.2 Hz, perfused with Krebs-Henseleit solution having an external calcium concentration of 2.52 mM, and maintained at 28 degrees C. RESULTS--Peak isometric developed tension was significantly higher in 1 month than 3, 6 and 12 months. Peak rate of isometric tension rise decreased substantially between 1, 3 and 12 months. Time to peak isometric developed tension showed a significant increase of both 3 and 12 months of age. Time to half relaxation increased significantly from 3 to 6 and from 3 to 12 months. Maximum rate of tension decline decreased from 3 to 6 and from 3 to 12 months. No difference in resting tension was noted among any group. Isotonically, peak shortening and time to peak shortening increased from 1 to 3 months of age. Time to half re-lengthening increased from 3 to 6 and from 3 to 12 months of age. No difference in peak shortening velocity, peak relaxation velocity and relative change in muscle length was noted among any groups. CONCLUSION--The maturation affects the mechanical performance of cardiac muscle.

Influencia da Carga no Comportamento quanto ao Desgaste de um Aco ABNT-1020 Bifasico Revenido a 450°C

The wear rate of the dual-phase steel ABNT-1020 tempered at 450°C sliding against cemented steel ABNT-1020 in function of load value is investigated in wide load range. The alteration in behavior of this function at intermediate load level, like in the case of low hardness steel sliding against high hardness steel, is observed. The analysis by scanning electronic microscope before and after this alteration showed a change of wear mechanism from plastic displacement to embrittlement.

Análise do comportamento de rebolos convencionais na retificação de aços frágeis e dúcteis

The aim of this work war to study the behavior of the plan tangential grinding process with conventional grinding wheels, under several machining conditions and a selected dressing condition. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for brittle and ductile steels workpieces. The grinding input parameters, which were, cutting speed, workpiece speed and cutting feed, were chosen based on the grinding machine characteristics. The results discussion emphasized the wear mechanism of the grinding wheel cutting surface and the cutting phenomenology of the grinding process.

Comportamento fractal de tracos de fraturas na borda sul do macico granitico de itu, estado de Sao Paulo

Fractal geometry is relevant to understand and explain many natural complex geometries. Using the fractal set concept (fig. 1) many authors have shown that shorelines, landscapes and fractures follow a fractal behaviour. These authors have developed many methods, including the Cantor's Dust Method (CDM) (VELDE et al., 1992), a linear method of analysis adapted for the determination of two-dimensional phenomena. The Itu Granitic Complex (IGC) is a wide granitic body that that crops out at northwest of Cabreuva City, Sao Paulo State (fig. 2) and was affected in its south border by dextral Itu-Jundiuvira Shear Zone (IJSZ) that produced fractures and alignment of feldspars crystals. The different types of fractures (compression, distension and shear) was discriminated from the relationship between them and medium stress ellipsoid of IJSZ (fig. 3). A modified version of CDM was used to study a possible fractal behaviour of the fracture traces in the south border of IGC. The main modification was the use only one direction of analysis (NE/SW). Four parallel profiles were traced with lengths between 9.75km and 12.75km, each one them was divided into six classes of segments (x) with 375m, 500m, 750m, 1.000m, 1.250m and 1.500m. The parameter (N) is provided by he rate between profile length and choiced segment. For each x the number of intervals is counted with at least one event (fracture intersection) which supplied the parameter(n). The n/N rate provide the parameter (p) that represents the relationship between frequency of events and x. And finally the parameters p and x were plotted in a logarithmic graphics (fig. 4) that provide a line with such a declivity (1) which is related to effective dimension (De). In theory, granitics bodies are isotropics and they would have a same fractal dimension in all segments, but the logarithmic graphics (fig. 4) show that fracture traces of IGC has a fractal behaviour in a restrict interval. This fact probably occurs from the passage of a ductil-brittle deformation condition to a more brittle deformation condition of IGC.

Comportamento de cultivares de soja quanto a qualidade fisiológica de sementes

This work was carried out in order to evaluate if there was a relationship between genotypes and the physiological soybean (Glycine max L.) seed quality. It was conducted during three years using seven cultivars each year. The seeds were harvested at: 1) yellow radicle or expanded pod stage, 2) yellow pod or physiological maturity (R7), 3) harvest maturity (R8), and 4) R8 + 21 days delay. Seed moisture content, standard germination, and vigor tests were performed. The germination and vigor evaluated by accelerated aging and electrical conductivity did not show physiological seed quality differences among genotypes as harvested at physiological maturity. Then, the evaluation of seed germination and vigor, when the environment is not a considered factor, is not an efficient method to show differences among soybean genotypes in terms of seed quality.

Borohidreto complexos de cobre (I) contendo difosfinas. Caracterização espectroscópica e comportamento térmico

Tetrahydroborate complexes of copper (I) with bidentate phosphines, [Cu(η 2-BH 4)(dppm)] (1), [Cu(η 2-BH 4)(dppe)] (2), [Cu(η 2-BH 4)(cis-dppet)] (3) and [Cu(η 2-BH 4)(dppb)] (4) (dppm = bis(diphenylphosphino)methane; dppe = 1,2-bis(diphenylphosphino) ethane; cis-dppet = 1,2-cis(diphenylphosphino)ethene; dppb = 1,4-bis(diphenylphosphino)butane) were prepared and characterized by elemental analysis, infrared spectroscopy, NMR and thermogravimetric analysis. The IR data for 1-4 showed bands typical of a bidentate coordination of BH 4 group to the copper atom and the 31P{ 1H} NMR spectra indicated that the phosphorous atoms are chelating the metal centre. The thermal behavior of the compounds was investigated and suggested that their thermal stability is influenced by the phosphines. Their thermal stability decreased as follows: [Cu(η 2-BH 4)(dppe)] (2) > [Cu(η 2-BH 4)(dppm)] (1) > [Cu(η 2-BH 4)(dppb)] (4) > [Cu(η 2-BH 4)(cis-dppet)] (3). According to thermal analysis and X-ray diffraction patterns all compounds decomposed giving Cu(BO 2) 2, CuO, CuO 2 and Cu as final products.

Comportamento do cafeeiro apoatã em consórcio com culturas anuais

This study was conducted in Adamantina, region of Alta Paulista, São Paulo State, Brazil, from 1989 to 1993. Yield of Apoatã coffee (Coffea canephora Pierre ex Froehner) was evaluated during four years of intercropping with five plant species: IAC 20 - cotton (Gossypium hirsutum L.); cv. Tatu - peanut (Arachis hypogaea L.); IAC 165 - rice (Oryza sativa L.); cv. Guarani - castor bean (Ricinus communis L.) and IAC 100-B - corn (Zea mays L.). The crops were seeded 50 cm apart from coffee canopy. The treatments were arranged in randomized complete block design with five replications. Yield was significantly decreased when coffee was intercropped with castor bean, corn, cotton and peanut, but height and diameter of orthotropic branches were not affected. Linear correlation analysis showed that coffee yield was inversely correlated with the dry biomass of the intercrops.

Comportamento de cultivares de cafeeiro em diferentes densidades de plantio

This experiment was developed at Adamantina, west region of the State of São Paulo, Brazil, during May 1995 to June of 2000. The plant growth and productivity of two coffee cultivars Catuaí Amarelo IAC 47 and Obatã IAC 1669-20, were evaluated considering to plant densities of 2.500, 5.000, 7.519 and 10.000 plants ha-1. The density of 2500 also was studied with two plants in the same hole, spaced of 2,0 m in the plant line. The experimental design was the randomized completely blocks with three replications, using the split-plot system. The plots were the densities and the split-plots were the cultivars. Results showed that, with increasing of the planting density, the plant height also increased, while the stem and plant basis diameters were reduced, however the planting density did not affect the height of the first branch. The increase of the planting density also increased the field productivity and reduced the production of individual plant. The cultivation of two plants at the same hole reduced the stem diameter and the plant yield. The cultivar Catuaí Amarelo IAC 47 showed the higher plant height and the higher plant basis diameter while cv. Obatã IAC 1669-20 showed the higher stem diameter. The field productivity and individual plant productivity were not different between those cultivars in the period studied (1997-2000).