Óleo essencial de limão no ensino da cromatografia em camada delgada

This paper describes a simple experiment employing the essential oil of limes which can be applied in undergraduate organic chemistry laboratory classes for the teaching of thin layer chromatography (TLC). The experiment consists in submit lime peel oil to TLC separation employing hexane and dichloromethane as the eluents and five different systems for visualization of the chromatogram. In one experiment it is possible to teach the different variables of the TLC technique. This experiment may also be performed following vapor distillation and liquid-liquid extraction technique in experimental classes.

Simulação Monte Carlo no ensino de luminescência e cinética de decaimento de estados excitados

A software based in the Monte Carlo method have been developed aiming the teaching of important cases of mechanisms found in luminescence and in excited states decay kinetics, including: multiple decays, consecutive decays and coupled systems decays. The Monte Carlo Method allows the student to easily simulate and visualize the luminescence mechanisms, focusing on the probabilities of the related steps. The software CINESTEX was written for FreeBASIC compiler; it assumes first-order kinetics and any number of excited states, where the pathways are allowed with probabilities assigned by the user.

A importância do método de Hartree no ensino de química quântica

Hartree's original ideas are described. Its connection with electrostatics can be explored in order to decrease the gap between teaching of Physics and Chemistry. As a consequence of its simplicity and connection with electrostatics, it is suggested that Hartree's method should be presented before the Hartree-Fock method. Besides, since the fundamental concepts of indistinguishibility of electrons along with the antissimetry of the wave function are missing in the Hartree's product, the method itself can be used to introduce these concepts. Despite the fact that these features are not included in the trial wavefunction, important qualitatively correct results can be obtained.

Da génese ao ensino da química verde

An analysis of the activities that contributed to the birth of Green Chemistry (GC) about twenty years ago has shown that it emerged in response to the problems of pollution and wastes felt by the Chemical Industry. This close connection between GC and the Chemical Industry is similar to that found earlier between Chemistry and Industrial Chemistry before they separated. It was also found that since its very beginning the Chemical Industry has occasionally practiced GC. Broad implications of these findings to the teaching of GC are discussed.

Simulação Monte Carlo de mecanismo de transferência de energia de excitação eletrônica: modelo de Perrin para a supressão estática da luminescência

A software based in the Monte Carlo method has been developed aiming the teaching of the Perrin´s model for static luminescence quenching. This software allows the student to easily simulate the luminescence decays of emissive molecules in the presence of quenching ones. The software named PERRIN was written for FreeBASIC compiler and it can be applied for systems where the molecules remain static during its excited state lifetime. The good agreement found between the simulations and the expected theoretical results shows that it can be used for the luminescence and excited states decay kinetic teaching.

”Käsitteitä tarpeen mukaan". Kirjallisuustieteelliset käsitteet lukion kirjallisuudenopetuksessa

Tavoitteeni tässä tutkimuksessa oli selvittää, miten kirjallisuustieteellisiä proosa-anayysin käsitteitä opetetaan opetussuunnitelman mukaisissa lukion äidinkielen ja kirjallisuuden oppikirjoissa ja miten hyvin kokelaat hallitsivat kertoja-käsitteen tekstitaidon ylioppilaskokeessa keväällä 2007. Samalla pohdin, minkälainen kirjallisuustieteellinen käsitteistö palvelisi tekstianalyysin opetusta koulussa, koska Lukion opetussuunnitelman perusteet 2003 ja äidinkielen ylioppilaskoe edellyttävät äidinkielen ja kirjallisuuden opetukselta ja oppilailta käsitteiden käyttöä. Tutkimusaineistonani olivat kaikki kuusi käytössä olevaa lukion äidinkielen ja kirjallisuuden oppikirjaa ja 440 kpl kevään 2007 äidinkielen tekstitaidon ylioppilaskokeen vastaustekstiä. Oppikirjoja tarkastelin soveltamalla niiden arviointiin Lev S. Vygotskin ajatuksia arkikäsitteiden ja tieteellisten käsitteiden opettamisesta ja Hans Aeblin esittämiä teoreettisia malleja käsitteiden opettamisesta ja oppimisesta. Tutkimukseni osoittaa, että opetussuunnitelmassa mainittujen proosa-analyysin käsitteiden kertoja, näkökulma, motiivi, aihe ja teema opetus on epätäsmällistä. Oppikirjoissa ei ole otettu huomioon sitä, että käsitteenoppiminen on monivaiheinen prosessi. Myöskään problematiikkaa, joka aiheutuu kyseisten käsitteiden määrittelyn kirjavuudesta ja käytöstä sekä arkikielen käsitteinä että tieteellisinä käsitteinä, ei oppikirjoissa käsitellä. Sama näkyy ylioppilaskoeaineistossa: oppilaat eivät hallitse käsitettä kertoja tieteellisenä käsitteenä. Tietoisuus kirjallisuustieteellisten käsitteiden määrittelyn problematiikasta ja arkikäsitteiden ja tieteellisten käsitteiden ontologisista kategorioista on onnistuneen käsitteenoppimisen edellytys. Kirjallisuustieteelliset käsitteet ovat metakäsitteitä, jotka edellyttävät oppilaiden metakäsitteellisen tietoisuuden ja motivaation hyödyntämistä opetuksessa, jossa olisi sovellettava monipuolisesti eri oppimiskäsitysten parhaita puolia hyödyntäviä lähestymistapoja, erilaisia pedagogisia diskursseja. Koulujen kirjallisuudenopetusta suunniteltaessa ja kirjallisuustieteellisiä käsitteitä opetettaessa on otettava huomioon niin kirjallisuustieteen kuin kasvatustieteen näkökulma. Opetussuunnitelman ja ylioppilaskokeen asettama vaatimus käsitteiden käytöstä on kohtuuton, mikäli ei sovita, miten käsitteet määritellään ja mitä käsitteitä kokelaiden oletetaan ylioppilaskokeessa hallitsevan. Kirjallisuustieteellisten käsitteiden puutteellisen opetuksen oppikirjoissa ja niiden epämääräisen käytön ylioppilaskokeen tehtävänannoissa ja arvioinnissa voi kärjistyneimmillään nähdä oppilaan oikeusturvakysymyksenä

Ações de divulgação de química na Casa da Descoberta - centro de divulgação de ciência da Universidade Federal Fluminense

This paper describes the main activities regarding scientific dissemination in the field of Chemistry at Casa da Descoberta (CD) - a Scientific Dissemination Center of the Fluminense Federal University. It presents a brief history of CD and discusses the difficulties concerning the dissemination of Chemistry at Scientific Dissemination Centers. This work also approaches some activities developed throughout the years: experiments performed in relation to the visitors' daily life, training of monitors to act as mediators in the non-formal teaching of Chemistry, production of dissemination materials, elaboration of books, as well as activities that relate formal to non-formal education.

Análise vibracional de compostos de coordenação de niquel(II): uma abordagem ao ensino dos grupos pontuais

This paper presents an IR and Raman experiment executed during the teaching of the course "Chemical Bonds" for undergraduated students of Science and Technology and Chemistry at the Federal University of ABC, in order to facilitate and encourage the teaching and learning of group theory. Some key aspects of this theory are also outlined. We believe that student learning was more significant with the introduction of this experiment, because there was an increase in the discussions level and in the performance during evaluations. This work also proposes a multidisciplinary approach to include the use of quantum chemistry tools.

Un método para enseñar el porqué suceden las reacciones químicas

A methodology is proposed for explaining one of the central questions in the teaching of general chemistry courses to freshman students: why do chemical transformations occur? The answer to this question is based on thermodynamics but we propose arriving at an answer in a more intuitive way by using computational tools in a bid to increase the motivation of students for learning chemistry.

Explorando as percepções de professores em serviço sobre as visualizações no ensino de química

Taking into account the requirements for the teaching of chemistry, several visualization resources (software, videos, animations, molecular models, among others) are available. These visual aids are used in order to enhance the understanding of chemical phenomena in the classroom. However, many teachers make scant use of these resources, limiting macroscopic understanding of chemical science. Thus, this article discusses chemistry teachers' views on several aspects such as using visual aids in teaching chemistry, a resource most widely used in classes on atomic models, isomerism and spatial geometry.

Desenvolvimento de um sistema de análise por injeção em fluxo utilizando materiais alternativos de baixo custo para fins didáticos

This work describes a simple and inexpensive flow injection analysis system in which gravity force provides fluid propulsion while needles for insulin administration or metallic wires act as electrodes for amperometric detection. The proposed system was able to demonstrate the influence of several operational parameters on the transient signals. Moreover, this system was successfully used to evaluate both the stoichiometry of Cu2+-EDTA complex and the effect of pH on the kinetics of the reaction between ferricyanide and ascorbic acid. Therefore, the proposed system can be regarded as an efficient and accessible didactic tool for the teaching of FIA principles.

Fiktiivisen kirjallisuuden maailmasta monikulttuuriseen Suomeen. Ennakointikertomus kirjallisuudenopetuksen ja monikulttuurisuuskasvatuksen välineenä

From the world of fiction literature into multi-cultural Finland. Anticipatory story as an educational tool in teaching of literature and multiculturalism The research clarifies the relationship between reading fiction literature and multicultural value education in basic education. The research focuses on the subject didactics of mother tongue and literature and on the literature teaching in particular. The objective is to develop a method that is easily transferable into a teaching context so as to intensify the educational discussion based on fiction literature. In essence, understanding fiction literature and the ethical and moral thinking resemble one another, because both of them aim at empathizing with the thinking of a person or with a situation foreign to oneself. For this reason fiction literature is ideally suited for the discussion on ethical and moral values within a subject entity in the basic education. The empirical unit of the research consists of two parts. The first part explains how youth novels published in the years 1993 – 2007 describe multiculturalism in Finnish society. Books on multiculturalism are still few in number within youth literature, and people with a foreign background are mainly minor or background characters in such literary works. Nevertheless, youth novels serve well as a starting point for an educational discussion about multicultural issues. More often than not characters in youth novels are stereotypes and even opposite to each other. The juxtaposing makes a young reader question the stereotypes associated with immigrants. Besides the stereotype, reference to a prototype or a model is possible. The second part tests the usefulness of an anticipatory story based on a fictive text for an educational discussion about multicultural issues. The empirical material was collected from the eighth-grade teaching groups in basic education as follows: one teaching group was an immigrant group, the second one a group of Finns with experience of immigrants while the third group of students had hardly any experience of immigrants. The anticipatory stories were written on the basis of extracts from youth novels with multicultural themes. The material collected for a total of 120 anticipatory stories was analysed by using meaning cue analysis. Using the meaning cue analysis, the anticipatory stories were divided into three groups: stories with predominantly positive meaning cues of interculturalism, ambivalent stories with both positive and negative meaning cues of interculturalism and the stories with predominantly negative meaning cues of interculturalism. The meaning cues produced by girls and boys differ from one another, in particular, by the negative meaning cues of interculturalism. For girls, the predominant meaning cue is fear whereas for boys, it is that of violence. It would also seem that the students, in particular, boys with little experience of immigrants produce more negative meaning cues of interculturalism than do immigrants or Finnish students with experience of immigrants. Further still, it seems that active reading of fiction literature affects the meaning cues of interculturalism in an ambivalent direction. In the way of youth novels this is understandable, because youth novels in general are made up of opposite characters and meaning cues. The less the student takes an interest in reading, the more he used meaning cues from outside the parent text for his anticipatory story. No doubt it would be possible to use fiction literature in the literature education to a much higher extent than it is being used today whereby the literature could be used in basic education for reviewing subject entities or study contents of other study subjects. By way of an anticipatory story and the meaning cue analysis, it is possible to intensify the educational discussions based on fiction literature. However, using fiction literature in the literature education requires consideration of the specific genre of fiction literature.

Verenpaineen mittaamisen opettaminen sairaanhoitaja- ja terveydenhoitajaopiskelijoille

Teaching the measurement of blood pressure for both nursing and public health nursing students The purpose of this two-phase study was to develop the teaching of blood pressure measurement within the nursing degree programmes of the Universities of Applied Sciences. The first survey phase described what and how blood pressure measurement was taught within nursing degree programmes. The second intervention phase (2004-2005) evaluated first academic year nursing and public health nursing students’ knowledge and skills results for blood pressure measurement. Additionally, the effect on the Taitoviikko experimental group students’ blood pressure measurement knowledge and skills level. A further objective was to construct models for an instrument (RRmittTest) to evaluate nursing students measurement of blood pressure (2003-2009). The research data for the survey phase were collected from teachers (total sampling, N=107, response rate 77%) using a specially developed RRmittopetus-questionnaire. Quasi-experimental study data on the RRmittTest-instrument was collected from students (purposive sampling, experimental group, n=29, control group, n=44). The RRmittTest consisted of a test of knowledge (Tietotesti) and simulation-based test (TaitoSimkäsi and Taitovideo) of skills. Measurements were made immediately after the teaching and in clinical practice. Statistical methods were used to analyse the results and responses to open-ended questions were organised and classified. Due to the small amount of materials involved and the results of distribution tests of the variables, non-parametric analytic methods were mainly used. Experimental group and control group similar knowledge and skills teaching was based on the results of the national survey phase (RRmittopetus) questionnaire results. Experimental group teaching includes the supervised Taitoviikko teaching method. During Taitoviikko students studied blood pressure measurement at the municipal hospital in a real nursing environment, guided by a teacher and a clinical nursing professional. In order to evaluate both learning and teaching the processes and components of blood pressure measurement were clearly defined as follows: the reliability of measurement instruments, activities preceding blood pressure measurement, technical execution of the measurement, recording, lifestyle guidance and measurement at home (self-monitoring). According to the survey study, blood pressure measurement is most often taught at Universities of Applied Sciences, separately, as knowledge (teaching of theory, 2 hours) and skills (classroom practice, 4 hours). The teaching was implemented largely in a classroom and was based mainly on a textbook. In the intervention phase the students had good knowledge of blood pressure measurement. However, their blood pressure measurement skills were deficient and the control group students, in particular, were highly deficient. Following in clinical practice the experimental group and control group students’ blood pressure measurement recording knowledge improve and experimental groups declined lifestyle guidance. Skills did not improve within any of the components analysed. The control groups` skills on the whole, declined statistically.There was a significant decline amongst the experimental group although only in one component measured. The results describe the learning results for first academic year students and no parallel conclusions should be drawn when considering any learning results for graduating students. The results support the use and further development of the Taitoviiko teaching method. The RRmittTest developed for the study should be assessed and the results seen from a negative perspective. This evaluation tool needs to be developed and retested.

Tool-supported invariant-based programming

The development of correct programs is a core problem in computer science. Although formal verification methods for establishing correctness with mathematical rigor are available, programmers often find these difficult to put into practice. One hurdle is deriving the loop invariants and proving that the code maintains them. So called correct-by-construction methods aim to alleviate this issue by integrating verification into the programming workflow. Invariant-based programming is a practical correct-by-construction method in which the programmer first establishes the invariant structure, and then incrementally extends the program in steps of adding code and proving after each addition that the code is consistent with the invariants. In this way, the program is kept internally consistent throughout its development, and the construction of the correctness arguments (proofs) becomes an integral part of the programming workflow. A characteristic of the approach is that programs are described as invariant diagrams, a graphical notation similar to the state charts familiar to programmers. Invariant-based programming is a new method that has not been evaluated in large scale studies yet. The most important prerequisite for feasibility on a larger scale is a high degree of automation. The goal of the Socos project has been to build tools to assist the construction and verification of programs using the method. This thesis describes the implementation and evaluation of a prototype tool in the context of the Socos project. The tool supports the drawing of the diagrams, automatic derivation and discharging of verification conditions, and interactive proofs. It is used to develop programs that are correct by construction. The tool consists of a diagrammatic environment connected to a verification condition generator and an existing state-of-the-art theorem prover. Its core is a semantics for translating diagrams into verification conditions, which are sent to the underlying theorem prover. We describe a concrete method for 1) deriving sufficient conditions for total correctness of an invariant diagram; 2) sending the conditions to the theorem prover for simplification; and 3) reporting the results of the simplification to the programmer in a way that is consistent with the invariantbased programming workflow and that allows errors in the program specification to be efficiently detected. The tool uses an efficient automatic proof strategy to prove as many conditions as possible automatically and lets the remaining conditions be proved interactively. The tool is based on the verification system PVS and i uses the SMT (Satisfiability Modulo Theories) solver Yices as a catch-all decision procedure. Conditions that were not discharged automatically may be proved interactively using the PVS proof assistant. The programming workflow is very similar to the process by which a mathematical theory is developed inside a computer supported theorem prover environment such as PVS. The programmer reduces a large verification problem with the aid of the tool into a set of smaller problems (lemmas), and he can substantially improve the degree of proof automation by developing specialized background theories and proof strategies to support the specification and verification of a specific class of programs. We demonstrate this workflow by describing in detail the construction of a verified sorting algorithm. Tool-supported verification often has little to no presence in computer science (CS) curricula. Furthermore, program verification is frequently introduced as an advanced and purely theoretical topic that is not connected to the workflow taught in the early and practically oriented programming courses. Our hypothesis is that verification could be introduced early in the CS education, and that verification tools could be used in the classroom to support the teaching of formal methods. A prototype of Socos has been used in a course at Åbo Akademi University targeted at first and second year undergraduate students. We evaluate the use of Socos in the course as part of a case study carried out in 2007.

Parallella, dynamiska representationer i gymnasiefysiken : implementering av ett interaktivt datorverktyg i didaktiska situationer och uppfattning av effektivt lärande

The computer is a useful tool in the teaching of upper secondary school physics, and should not have a subordinate role in students' learning process. However, computers and computer-based tools are often not available when they could serve their purpose best in the ongoing teaching. Another problem is the fact that commercially available tools are not usable in the way the teacher wants. The aim of this thesis was to try out a novel teaching scenario in a complicated subject in physics, electrodynamics. The didactic engineering of the thesis consisted of developing a computer-based simulation and training material, implementing the tool in physics teaching and investigating its effectiveness in the learning process. The design-based research method, didactic engineering (Artigue, 1994), which is based on the theoryof didactical situations (Brousseau, 1997), was used as a frame of reference for the design of this type of teaching product. In designing the simulation tool a general spreadsheet program was used. The design was based on parallel, dynamic representations of the physics behind the function of an AC series circuit in both graphical and numerical form. The tool, which was furnished with possibilities to control the representations in an interactive way, was hypothesized to activate the students and promote the effectiveness of their learning. An effect variable was constructed in order to measure the students' and teachers' conceptions of learning effectiveness. The empirical study was twofold. Twelve physics students, who attended a course in electrodynamics in an upper secondary school, participated in a class experiment with the computer-based tool implemented in three modes of didactical situations: practice, concept introduction and assessment. The main goal of the didactical situations was to have students solve problems and study the function of AC series circuits, taking responsibility for theirown learning process. In the teacher study eighteen Swedish speaking physics teachers evaluated the didactic potential of the computer-based tool and the accompanying paper-based material without using them in their physics teaching. Quantitative and qualitative data were collected using questionnaires, observations and interviews. The result of the studies showed that both the group of students and the teachers had generally positive conceptions of learning effectiveness. The students' conceptions were more positive in the practice situation than in the concept introduction situation, a setting that was more explorative. However, it turned out that the students' conceptions were also positive in the more complex assessment situation. This had not been hypothesized. A deeper analysis of data from observations and interviews showed that one of the students in each pair was more active than the other, taking more initiative and more responsibilityfor the student-student and student-computer interaction. These active studentshad strong, positive conceptions of learning effectiveness in each of the threedidactical situations. The group of less active students had a weak but positive conception in the first iv two situations, but a negative conception in the assessment situation, thus corroborating the hypothesis ad hoc. The teacher study revealed that computers were seldom used in physics teaching and that computer programs were in short supply. The use of a computer was considered time-consuming. As long as physics teaching with computer-based tools has to take place in special computer rooms, the use of such tools will remain limited. The affordance is enhanced when the physical dimensions as well as the performance of the computer are optimised. As a consequence, the computer then becomes a real learning tool for each pair of students, smoothly integrated into the ongoing teaching in the same space where teaching normally takes place. With more interactive support from the teacher, the computer-based parallel, dynamic representations will be efficient in promoting the learning process of the students with focus on qualitative reasoning - an often neglected part of the learning process of the students in upper secondary school physics.