Predicting the mechanical behavior of amorphous polymeric materials under strain through multi-scale simulation

Polymeric materials have become the reference material for high reliability and performance applications. However, their performance in service conditions is difficult to predict, due in large part to their inherent complex morphology, which leads to non-linear and anisotropic behavior, highly dependent on the thermomechanical environment under which it is processed. In this work, a multiscale approach is proposed to investigate the mechanical properties of polymeric-based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, the coupling of a finite element method (FEM) and molecular dynamics (MD) modeling, in an iterative procedure, was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, this multiscale approach computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multiscale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Cristalização de Biomateriais Vitrocerâmicos e Mineralização em Meio Fisiológico Simulado

We propose new theoretical models, which generalize the classical Avrami-Nakamura models. These models are suitable to describe the kinetics of nucleation and growth in transient regime, and/or with overlapping of nucleation and growth. Simulations and predictions were performed for lithium disilicate based on data reported in the literature. One re-examined the limitations of the models currently used to interpret DTA or DSC results, and to extract the relevant kinetic parameters. Glasses and glass-ceramics with molar formulation 0.45SiO2? (0.45-x)MgO?xK2O?0.1(3CaO.P2O5) (0?x?0.090) were prepared, crystallized and studied as potential materials for biomedical applications. Substitution of K+ for Mg2+ were used to prevent devritification on cooling, to adjust the kinetics of crystallization and to modify the in vitro behaviour of resulting biomaterials. The crystallization of the glass frits was studied by DTA, XRD and SEM. Exothermic peaks were detected corresponding to bulk crystallization of whitlockite-type phosphate, Ca9MgK(PO4)7, at approximately 900ºC, and surface crystallization of a predominant forsterite phase (Mg2SiO4) at higher temperatures. XRD also revealed the presence of diopside (CaMgSi2O6 in some samples. The predominant microstructure of the phosphate phase is of the plate-type, seemingly crystallizing by a 2-dimensional growth mechanism. Impedance spectroscopy revealed significant changes in electrical behaviour, associated to crystallization of the phosphate phase. This showed that electrical measurements can be used to study the kinetics of crystallization for cases when DTA or DSC experiments reveal limitations, and to extract estimates of relevant parameters from the dependence of crystallization peak temperature, and its width at half height. In vitro studies of glasses and glass-ceramics in acelular SBF media showed bioactivity and the development of apatite layers The morphology, composition and adhesion of the apatite layer could be changed by substitution of Mg2+ by K+. Apatite layers were deposited on the surface of glass-ceramics of the nominal compositions with x=0 and 0.09, in contact with SBF at 37ºC. The adhesion of the apatite layer was quantified by the scratch test technique, having been related with SBF?s immersion time, with composition and structure of the glass phase, and with the morphology of the crystalline phase of the glass-ceramics. The structure of three glasses (x=0, 0.045 and 0.090) were investigated by MAS-NMR ( 29Si and 31P), showing that the fraction of Q3 structural units increases with the contents of Mg, and that the structure of these glasses includes orthophosphate groups (PO43-) preferentially connected to Ca2+ ions. Mg2+ ions show preference towards the silicate network. Substitution of Mg2+ by K+ allowed one to change the bioactivity. FTIR data revealed octacalcium phosphate precipitation (Ca8H2(PO4)6.5H2O) in the glass without K, while the morphology of the layer acquires the shape of partially superimposed hemispheres, spread over the surface. The glasses with K present a layer of acicular hidroxyapatite, whose crystallinity and needles thickness tend to increase along with K content.

Linking customer satisfaction, quality, and strategic planning

By acknowledging and dissecting the interconnected roles of customer satisfaction, quality, and strategic planning, this paper provides an analytical framework for creating a customer-driven organization and culture. It shows how quality starts and ends with the customer. Companies that are achieving long-term continuous improvement in quality tailored to customer satisfaction possess lasting characteristics such as customer orientation, customer consciousness, and customer responsiveness. In doing so, they liberate the quality concept from the narrow product or service focus to encompass total conformance to customer requirements in spite of the existing functionalization and departmentalization of modern complex structures. In addition to these key components, a customer-driven organization demands building and nurturing a customer satisfaction culture and value system that makes quality improvement and heightened concern for customer satisfaction a permanent aspect of organizational life.

Interaction between information systems and work in the Brazilian banking sector

This article presents the results of a research to understand the conditions of interaction between work and three specific information systems (ISs) used in the Brazilian banking sector. We sought to understand how systems are redesigned in work practices, and how work is modified by the insertion of new systems. Data gathering included 46 semi-structured interviews, together with an analysis of system-related documents. We tried to identify what is behind the practices that modify the ISs and work. The data analysis revealed an operating structure: a combination of different practices ensuring that the interaction between agents and systems will take place. We discovered a structure of reciprocal conversion caused by the increased technical skills of the agent and the humanization of the systems. It is through ongoing adjustment between work and ISs that technology is tailored to the context and people become more prepared to handle with technology.

Learning dependent sources using mixtures of Dirichlet: applications on hyperspectral unmixing

This paper is an elaboration of the DECA algorithm [1] to blindly unmix hyperspectral data. The underlying mixing model is linear, meaning that each pixel is a linear mixture of the endmembers signatures weighted by the correspondent abundance fractions. The proposed method, as DECA, is tailored to highly mixed mixtures in which the geometric based approaches fail to identify the simplex of minimum volume enclosing the observed spectral vectors. We resort then to a statitistical framework, where the abundance fractions are modeled as mixtures of Dirichlet densities, thus enforcing the constraints on abundance fractions imposed by the acquisition process, namely non-negativity and constant sum. With respect to DECA, we introduce two improvements: 1) the number of Dirichlet modes are inferred based on the minimum description length (MDL) principle; 2) The generalized expectation maximization (GEM) algorithm we adopt to infer the model parameters is improved by using alternating minimization and augmented Lagrangian methods to compute the mixing matrix. The effectiveness of the proposed algorithm is illustrated with simulated and read data.

Blue-enhanced thin-film photodiode for dual-screen x-ray imaging

This article reports on a-Si:H-based low-leakage blue-enhanced photodiodes for dual-screen x-ray imaging detectors. Doped nanocrystalline silicon was incorporated in both the n- and p-type regions to reduce absorption losses for light incoming from the top and bottom screens. The photodiode exhibits a dark current density of 900 pA/cm(2) and an external quantum efficiency up to 90% at a reverse bias of 5 V. In the case of illumination through the tailored p-layer, the quantum efficiency of 60% at a 400 nm wavelength is almost double that for the conventional a-Si:H n-i-p photodiode.

Introdução ao estudo de durabilidade do betão auto-compactável

O âmbito desta dissertação centra-se na temática de estudos de durabilidade do betão auto-compactavel (BAC), cujo cálculo dos constituintes foi feito pelo método de Nepomuceno. Sobre amostras de 40, 55 e 70 MPa, produzidas segundo o método atrás identificado, foram feitos estudos químicos e morfológicos, de propriedades de transporte de mecanismos de degradação e de propriedades indirectas. Os três provetes em estudo de 40, 55 e 70 MPa, apresentam características satisfatórias a nível da microestrutura, propriedades de transporte, carbonatação, penetração de cloretos e análise de ultra-sons. Numa análise comparativa entre as três resistências mecânicas em estudo, verifica-se que as propriedades de durabilidade vão melhorando a medida que a resistência mecânica também aumenta, ou seja, os provete com 70 MPa apresentam as melhores características a nível de durabilidade e os de 40 as piores; os de 55 apresentam propriedades intermédias.

Cr2O3 thin films grown at room temperature by low pressure laser chemical vapour deposition

Chromia (Cr2O3) has been extensively explored for the purpose of developing widespread industrial applications, owing to the convergence of a variety of mechanical, physical and chemical properties in one single oxide material. Various methods have been used for large area synthesis of Cr2O3 films. However, for selective area growth and growth on thermally sensitive materials, laser-assisted chemical vapour deposition (LCVD) can be applied advantageously. Here we report on the growth of single layers of pure Cr2O3 onto sapphire substrates at room temperature by low pressure photolytic LCVD, using UV laser radiation and Cr(CO)(6) as chromium precursor. The feasibility of the LCVD technique to access selective area deposition of chromia thin films is demonstrated. Best results were obtained for a laser fluence of 120 mJ cm(-2) and a partial pressure ratio of O-2 to Cr(CO)(6) of 1.0. Samples grown with these experimental parameters are polycrystalline and their microstructure is characterised by a high density of particles whose size follows a lognormal distribution. Deposition rates of 0.1 nm s(-1) and mean particle sizes of 1.85 mu m were measured for these films. (C) 2011 Elsevier B.V. All rights reserved.

Ensino de léxico e texto descritivo

Dissertação apresentada à Escola Superior de Educação de Lisboa para obtenção de grau de mestre em Didáctica da Língua Portuguesa no 1.º e 2.º Ciclos do Ensino Básico

Eficácia de um programa específico de exercício físico no desempenho físico de indivíduos em hemodiálise

Este estudo pretendeu analisar se um programa específico de exercício físico melhora o desempenho físico de indivíduos em hemodiálise. O programa de exercício foi desenhado e adaptado a cada indivíduo, por um fisioterapeuta, visando flexibilidade, força e resistência (n=11). Após o programa verificou-se um aumento significativo da distância percorrida em 6 minutos (6-minute walk), um aumento da velocidade da marcha (gait speed) e uma maior velocidade a levantar/sentar numa cadeira (sit-to-stand-to-sit). Assim, um treino específico de exercício em casa parece melhorar o desempenho físico de indivíduos em hemodiálise.

HIV/AIDS risk among female sex workers who use crack in Southern Brazil

OBJECTIVE: To understand the social context of female sex workers who use crack and its impact on HIV/AIDS risk behaviors. METHODODOLOGICAL PROCEDURES: Qualitative study carried out in Foz do Iguaçu, Southern Brazil, in 2003. Twenty-six in-depth interviews and two focus groups were carried out with female commercial sex workers who frequently use crack. In-depth interviews with health providers, community leaders and public policy managers, as well as field observations were also conducted. Transcript data was entered into Atlas.ti software and grounded theory methodology was used to analyze the data and develop a conceptual model as a result of this study. ANALYSIS OF RESULTS: Female sex workers who use crack had low self-perceived HIV risk in spite of being engaged in risky behaviors (e.g. unprotected sex with multiple partners). Physical and sexual violence among clients, occasional and stable partners was widespread jeopardizing negotiation and consistent condom use. According to health providers, community leaders and public policy managers, several female sex workers who use crack are homeless or live in slums, and rarely have access to health services, voluntary counseling and testing, social support, pre-natal and reproductive care. CONCLUSIONS: Female sex workers who use crack experience a plethora of health and social problems, which apparently affect their risks for HIV infection. Low-threshold, user-friendly and gender-tailored interventions should be implemented, in order to increase the access to health and social-support services among this population. Those initiatives might also increase their access to reproductive health in general, and to preventive strategies focusing on HIV/AIDS and other sexually transmitted infections.

A survey about experiments on notions of time in children k-1 and k-2

In this paper we explore the importance of analyzing the exercises that the manuals have in Mathematics study, because the difficulty of identifying some errors on them can interfere with the capabilities of children. We work with some exercises related to the theme of temporal notions, based on a survey of textbooks from the 1st and 2nd grade (K-1 and K-2). Our concern is to alert about the importance of reflecting on the content of the books, in order to promote a teaching-learning process tailored to the needs of children. The activities present in the manuals should allow children to develop their logical- mathematical reasoning, for later be able to understand and apply Mathematics. To this end, we present some reflection about the exercises of manuals, and we give our opinion about what is the correct and incorrect. Also, some activities are suggested, among which were implemented with children of the 2nd grade, K- 2, along the experiments that support our work.

Técnicas e tácticas de guerrilha e o seu impacto junto do grande público

Vivemos actualmente numa sociedade caracterizada pela informação, pela segmentação do público e pela crescente necessidade de experiências por parte deste mesmo público, em que é cada vez mais difícil para as marcas posicionarem-se no mercado, razão pela qual é necessário pensar em novas estratégias publicitárias para comunicar com os consumidores. Em face deste cenário, o Marketing de Guerrilha pode constituir-se como uma ferramenta diferenciadora e eficaz, já que se propõe desenvolver soluções à medida dos públicos através da implementação de acções inesperadas, ousadas, impactantes e, sobretudo, geradoras de experiências. Neste contexto este trabalho procura aprofundar o conhecimento deste novo tipo de comunicação publicitária a partir da identificação das suas técnicas e tácticas mais usadas e do estudo do seu impacto junto do grande público, entendido este como a viralidade da acção, medida em Plays, e o feedback do consumidor, medido em Likes e Dislikes. Considerando a diminuta investigação científica sobre este tema, bem como a parca literatura disponível, esta dissertação assume a forma de um estudo exploratório do tipo misto sequencial, desenvolvido com base numa análise qualitativa seguida de quantitativa de 150 casos publicados online, disponibilizados na base de dados Ads of the World. Identificadas as técnicas e tácticas mais comuns, os resultados do trabalho empírico sugerem a existência de dependência entre técnicas ou tácticas e a viralidade da acção e feedback do consumidor.

Como avaliar as aprendizagens das práticas musicais em Educação Musical

É do conhecimento geral que muitos professores ensinam os alunos a ouvir, cantar e compor, mas usam testes escritos para avaliar as aprendizagens. Este facto revela que, por um lado, há quem tenha a ideia que os testes escritos estão mesmo a avaliar as práticas musicais e, por outro lado, também há quem considere que é muito difícil e inconsistente avaliar as práticas musicais porque a Música tem um carácter transitório, efémero, imaterial. Além do problema ser interessante, ele é abrangente porque existe tanto entre os professores especialistas de Música como entre os professores generalistas de Educação de Infância e de 1º Ciclo. A experiência levada a cabo nos últimos três anos no Mestrado em Ensino de Educação Musical no Ensino Básico sobre a forma de avaliar as aprendizagens dos alunos em Educação Musical mantém os testes escritos para avaliar os conhecimentos teóricos, mas introduz um instrumento de avaliação das práticas musicais, as grelhas de descritores de desempenho. Estas grelhas, ainda que mantendo princípios orientadores comuns, são sempre feitas à medida para cada situação específica de obra, atividade musical, alunos e são aplicadas não só em observação direta, mas também sobre registos áudio/vídeo. Estes instrumentos são construídos pelos docentes e não em conjunto com os alunos, mas são-lhes apresentados e explicados desde o início de cada unidade didática, usados regulamente para autoavaliação formativa e nas apresentações finais para avaliação sumativa. Desta forma os alunos sabem desde o início onde se espera que cheguem e sabem em cada momento do processo em que ponto se encontram e que problemas/dificuldades musicais devem ser ultrapassados. Em cada atividade comparámos a autoavaliação dos alunos com a avaliação dos professores e verificámos em todas as situações uma elevada correlação positiva (r > 0,9). Teremos ainda que consolidar os dados já obtidos pelo que esperamos o envolvimento de mais professores. A possibilidade de divulgar a solução aqui apresentada, nomeadamente, através de ações de formação contínua, permitirá um evidente aumento da consistência e fiabilidade da avaliação das práticas musicais em Educação Musical.

Modelling and aerodynamic simulation of a vehicle and failure analysis of a laminated front fender

Master Thesis in Mechanical Engineering field of Maintenance and Production