Aplicação de géis de goma guar no processo de clarificação de salmouras e águas produzidas

Produced water is considered the main effluent of the oil industry, due to their increased volume in mature fields and its varied composition. The oil and grease content (TOG) is the main parameter for the final disposal of produced water. In this context, it is of great significance to develop an alternative method based on guar gum gel for the treatment of synthetic produced water, and using as the differential a polymer having high hydrophilicity for clarifying waters contaminated with oil. Thus, this study aims to evaluate the efficiency of guar gum gels in the remotion of oil from produced water. Guar gum is a natural polymer that, under specific conditions, forms three-dimensional structures, with important physical and chemical properties. By crosslinking the polymer chains by borate ions in the presence of salts, the effect salting out occurs, reducing the solubility of the polymer gel in water. As a result, there is phase separation with the oil trapped in the collapsed gel. The TOG was quantified from the spectroscopy in the ultraviolet and visible region. The system was proven to be highly efficient in the removal of dispersed oil from water produced synthetically, reaching removal percentages above 90%.

Glare, a GIS tool to reconstruct the 3D surface of palaeoglaciers

Acknowledgements This research has been supported by the Leverhulme Trust International Network Grant IN-2012-140. Processing and collecting of ground penetrating data in Forgefonna was part of Elend Førre's master's project that was completed in 2009 at the Department of Geography, University of Bergen. We also acknowledge Dr Andreas Bauder for providing the subglacial topography data for Griessgletscher and Simone Tarquini for granting access to the high resolution TIN of Italy, a cut of which is provided to the reader to practice the tools (see Appendix). Referees Dr. Iestyn Barr, Dr. Jeremy Ely and Dr. Marc Oliva are thanked for their constructive comments and tool testing, which significantly improved the final output.

Using GIS and Remote Sensing Technologies to Identify Environmental Variables of Malaria Vector Breeding Sites in Western Kenya

This study used Landsat 8 satellite imagery to identify environmental variables of households with malaria vector breeding sites in a malaria endemic rural district in Western Kenya. Understanding the influence of environmental variables on the distribution of malaria has been critical in the strengthening of malaria control programs. Using remote sensing and GIS technologies, this study performed a land classification, NDVI, Tasseled Cap Wetness Index, and derived land surface temperature values of the study area and examined the significance of each variable in predicting the probability of a household with a mosquito breeding site with and without larvae. The findings of this study revealed that households with any potential breeding sites were characterized by higher moisture, higher vegetation density (NDVI) and in urban areas or roads. The results of this study also confirmed that land surface temperature was significant in explaining the presence of active mosquito breeding sites (P< 0.000). The present study showed that freely available Landsat 8 imagery has limited use in deriving environmental characteristics of malaria vector habitats at the scale of the Bungoma East District in Western Kenya.

Mineralogical (bulk rock and clay fraction) and stable isotope composition (d13C, d18O) of Aptian deposits of the Bir Oum Ali succession, central Tunisia

Alternations between siliciclastic, carbonate and evaporitic sedimentary systems, as recorded in the Aptian mixed succession of southern Tunisia, reflect profound palaeoceanographic and palaeoclimatic changes in this area of the southern Tethyan margin. The evolution from Urgonian-type carbonates (Berrani Formation, lower Aptian) at the base of the series, to intervals dominated by gypsum or detrital deposits in the remainder of the Aptian is thought to result from the interplay between climate change and tectonic activity that affected North Africa. Based on the evolution of clay mineral assemblages, the early Aptian is interpreted as having been dominated by slightly humid conditions, since smectitic minerals are observed. Near the early to late Aptian boundary, the onset of a gypsiferous sedimentation is associated with the appearance of palygorskite and sepiolite, which supports the installation of arid conditions in this area of the southern Tethyan margin. The evaporitic sedimentation may have also been promoted by the peculiar tectonic setting of the Bir Oum Ali area during the Aptian, where local subsidence may have been tectonically enhanced linked to the opening of northern and central Atlantic. Stress associated with the west and central African rift systems may have triggered the development of NW-SE, hemi-graben structures. Uplifted areas may have constituted potential new sources for clastic material that has been subsequently deposited during the late Aptian. Chemostratigraphic (d13C) correlation of the Bir Oum Ali succession with other peri-Tethyan regions complements biostratigraphic findings, and indicates that a potential expression of the Oceanic Anoxic Event (OAE) 1a may be preserved in this area of Tunisia. Although the characteristic negative spike at the base of this event is not recognized in the present study, a subsequent, large positive excursion with d13C values is of similar amplitude and absolute values to that reported from other peri-Tethyan regions, thus supporting the identification of isotopic segments C4-C7 of the OAE1a. The absence of the negative spike may be linked to either non preservation or non deposition: the OAE1a occurred in a global transgressive context, and since the Bir Oum Ali region was located in the innermost part of the southern Tethyan margin during most of the Aptian, stratigraphic hiatuses may have been longer than in other regions of the Tethys. This emphasizes the importance of integrating several stratigraphic disciplines (bio-, chemo- and sequence stratigraphy) when performing long-distance correlation.

UTILIZATION OF GIS AND SPATIAL ANALYSIS TECHNIQUES IN ARTISANAL AND SMALL SCALE MINING TO LOCATE A CENTRALIZED PROCESSING CENTRE

One of the global phenomena with threats to environmental health and safety is artisanal mining. There are ambiguities in the manner in which an ore-processing facility operates which hinders the mining capacity of these miners in Ghana. These problems are reviewed on the basis of current socio-economic, health and safety, environmental, and use of rudimentary technologies which limits fair-trade deals to miners. This research sought to use an established data-driven, geographic information (GIS)-based system employing the spatial analysis approach for locating a centralized processing facility within the Wassa Amenfi-Prestea Mining Area (WAPMA) in the Western region of Ghana. A spatial analysis technique that utilizes ModelBuilder within the ArcGIS geoprocessing environment through suitability modeling will systematically and simultaneously analyze a geographical dataset of selected criteria. The spatial overlay analysis methodology and the multi-criteria decision analysis approach were selected to identify the most preferred locations to site a processing facility. For an optimal site selection, seven major criteria including proximity to settlements, water resources, artisanal mining sites, roads, railways, tectonic zones, and slopes were considered to establish a suitable location for a processing facility. Site characterizations and environmental considerations, incorporating identified constraints such as proximity to large scale mines, forest reserves and state lands to site an appropriate position were selected. The analysis was limited to criteria that were selected and relevant to the area under investigation. Saaty’s analytical hierarchy process was utilized to derive relative importance weights of the criteria and then a weighted linear combination technique was applied to combine the factors for determination of the degree of potential site suitability. The final map output indicates estimated potential sites identified for the establishment of a facility centre. The results obtained provide intuitive areas suitable for consideration

GIS technologies and spatial organization patterns among hunter-gatherers: an archaeological case study from Southern Patagonia (southern South America)

This paper discusses some aspects of hunter-gatherer spatial organization in southern South Patagonia, in later times to 10,000 cal yr BP. Various methods of spatial analysis, elaborated with a Geographic Information System (GIS) were applied to the distributional pattern of archaeological sites with radiocarbon dates. The shift in the distributional pattern of chronological information was assessed in conjunction with other lines of evidence within a biogeographic framework. Accordingly, the varying degrees of occupation and integration of coastal and interior spaces in human spatial organization are explained in association with the adaptive strategies hunter-gatherers have used over time. Both are part of the same human response to changes in risk and uncertainty variability in the region in terms of resource availability and environmental dynamics.

The Approach to Daesh in Tunisia: From Bardo to Ben Gardane, aYear of Terror

Starting from a descriptive analysis of the main attacks by Daesh in Tunisia, this article examines the nature and evolution of the terrorist organization in this North African country. Thus, it examines the characteristics and vicissitudes of the attack on the Bardo Museum in March 2015, the attack on the Susa beach in June 2015, the bombing of the Presidential Guard in November 2015 and, finally, the military offensive against the town of Ben Gardane in March 2016. In addition, it presents some previous facts that are relevant in this research, such as the important presence of Tunisian foreign fighters in Syria or Libya, and, in particular, the threat of Daesh in Libya to the Tunisian State

Archaeology, Architecture and Digital Adaptation: Developing a GIS for Archaeological Excavation on Crete

This paper is not about the history or archaeology of Priniatikos Pyrgos per se. Rather, it is a review of how the site was recorded using both traditional survey and planning techniques and digital approaches applied through a Geographical Information System (hereafter GIS) during the 2007 through 2010 seasons. Earlier work at the site will necessarily be reviewed, specifically the geophysical survey work of the Istron Geoarchaeological Project and the excavations by Hayden and Tsipopoulou between 2005 and 2006, and regional survey work by Hayden and colleagues in the Vrokastro region (Hayden, this volume, 1999, 2004; Sarris et al. 2005; Shahrukh et al. 2012). The digitisation and incorporation of the latter into the project GIS will be explored in some detail.

Recupero digitale di dati storici e tracce per un turismo culturale nell'area del Centro Cadore: fotogrammetria e GIS nella valorizzazione di un territorio.

La tesi si occupa dell'uso di più tecniche fotogrammetriche e di strumenti GIS nel recupero digitale e nell'integrazione di una molteplicità di dati storici, opportunamente georeferenziati, inerenti l'area del Centro Cadore, ai fini anche della valorizzazione turistico-culturale del territorio. Un ampio spazio viene dato alla caratterizzazione del territorio e delle fonti - cartografiche, fotografiche e testuali - che sono state recuperate ed organizzate in archivio. Le applicazioni fotogrammetriche comprendono la generazione di ortofoto digitali a scala territoriale da immagini storiche e modelli 3D close-range ottenuti con tecniche SfM.

Representações Sociais da Cannabis no Concelho de Góis

A cannabis permanece como a substância ilícita mais consumida no mundo. Defendida por uns e “diabolizada” por outros, constitui uma das substâncias psicoactivas mais polémicas. Alguns autores destacaram já, a importância do estudo das representações sociais das substâncias psicoactivas. No entanto, desconhecem-se investigações que abordem a representação social desta substância num espaço rural. São objectivos deste estudo: 1) conhecer as representações sociais da cannabis no que diz respeito à substância, ao consumidor e ao contexto da utilização, 2) identificar as diferenças existentes entre utilizadores e não utilizadores desta substância da amostra em estudo. Para concretizar estes objectivos, foi realizado um estudo qualitativo que recorreu a uma dupla abordagem etno-metodológica e fenomenológica. Foram realizadas 30 entrevistas a indivíduos residentes nas duas maiores freguesias do concelho de Góis que, depois de transcritas, foram objecto de análise de conteúdo. No espaço rural considerado, a cannabis é maioritariamente representada como uma “droga”, indutora de uma sensação de mal-estar e causadora de dependência. Para os participantes o utilizador é percebido como detentor de características de personalidade negativas, que o induzem ao consumo. Relativamente ao eixo espacial, o espaço rural, e mais especificamente o concelho de Góis é representado como local de consumo e de produção da cannabis herbácea. Há uma distinção clara entre a representação social dos participantes que não utilizam a substância e os que utilizam. O último grupo representa-a como uma “droga leve”, e mostra-se esclarecido sobre as possíveis consequências da sua utilização. Neste grupo é ainda evidente a valorização da cannabis herbácea, em detrimento dos seus derivados. /

CTAMS GeoMedia User Tool Documentation and Technical GIS Concepts, 1998

A user manual for the GeoMedia software program, along with some discussion of digital orthophotos.

Efectos del terreno en la propagación electromagnética en entornos urbanos sobre la región andina, usando el modelo COST 231-Walfisch-Ikegami y herramientas de planificación basadas en GIS

El presente artículo hace parte del desarrollo de un algoritmo que considera la influencia del relieve en la propagación electromagnética para un entorno semi-urbano, trabajando en la banda de UHF (300MHz-3GHz) utilizada en los actuales y futuros sistemas de comunicación inalámbricos (i.e. 800-900MHz en sistemas DAMPS/US-TDMA/IS-136 y GSM). El modelo base, el COST231-Walfisch- Ikegami, empleado en la investigación,demostró beneficios, junto con los Sistemas de Información Geográfica (SIG) y las Herramientas de Planificación, para el desarrollo de los estudios de propagación, estimación de coberturas y análisis de los principales factores que afectan la planificación de un sistema móvil celular. Aquí se describen los conceptos básicos utilizados para el desarrollo del algoritmo aplicado, las consideraciones sobre las cuales se llevaron a cabolas campañas de medidas y el proceso de validación de resultados que comprueban la utilidad del algoritmo desarrollado para la predicción de Path Loss. El trabajo se basó en la fusión del modelo de propagación COST231-Walfisch-Ikegami con laHerramienta de Planificación Cell-View (fundamentada en el SIG ArcView) y la realización de mediciones en la ciudad de Bucaramanga con una unidad móvil de radiocomunicacióny control del espectro radioeléctrico de propiedad del Ministerio de Comunicaciones de Colombia, seccional Bucaramanga. El estudio llevado a cabo para la banda del sistema IS- 136, mostró resultados de simulación y validación que permiten corroborarlas aproximaciones empleadas.

W-CDMA capacity analysis using GIS based planning tools and MATLAB simulation

The evolution of cellular systems towards third generation (3G) or IMT-2000 seems to have a tendency to use W-CDMA as the standard access method, as ETSI decisions have showed. However, there is a question about the improvements in capacity and the wellness of this access method. One of the aspects that worry developers and researchers planning the third generation is the extended use of the Internet and more and more bandwidth hungry applications. This work shows the performance of a W-CDMA system simulated in a PC using cover maps generated with DC-Cell, a GIS based planning tool developed by the Technical University of Valencia, Spain. The maps are exported to MATLAB and used in the model. The system used consists of several microcells in a downtown area. We analyse the interference from users in the same cell and in adjacent cells and the effect in the system, assuming perfect control for each cell. The traffic generated by the simulator is voice and data. This model allows us to work with coverage that is more accurate and is a good approach to analyse the multiple access interference (MAI) problem in microcellular systems with irregular coverage. Finally, we compare the results obtained, with the performance of a similar system using TDMA.