Radio continuum and near-ingrared study of the MGRO J2019+37 region

Context. MGRO J2019+37 is an unidentified extended source of very high energy gamma-rays originally reported by the Milagro Collaboration as the brightest TeV source in the Cygnus region. Its extended emission could be powered by either a single or several sources. The GeV pulsar AGL J2020.5+3653, discovered by AGILE and associated with PSR J2021+3651, could contribute to the emission from MGRO J2019+37. Our aim is to identify radio and near-infrared sources in the field of the extended TeV source MGRO J2019+37, and study potential counterparts to explain its emission. Methods: We surveyed a region of about 6 square degrees with the Giant Metrewave Radio Telescope (GMRT) at the frequency 610 MHz. We also observed the central square degree of this survey in the near-infrared Ks-band using the 3.5 m telescope in Calar Alto. Archival X-ray observations of some specific fields are included. VLBI observations of an interesting radio source were performed. We explored possible scenarios to produce the multi-TeV emission from MGRO J2019+37 and studied which of the sources could be the main particle accelerator. Results: We present a catalogue of 362 radio sources detected with the GMRT in the field of MGRO J2019+37, and the results of a cross-correlation of this catalog with one obtained at near-infrared wavelengths, which contains ∼3 × 105 sources, as well as with available X-ray observations of the region. Some peculiar sources inside the ∼1◦ uncertainty region of the TeV emission from MGRO J2019+37 are discussed in detail, including the pulsar PSR J2021+3651 and its pulsar wind nebula PWN G75.2+0.1, two new radio-jet sources, the Hii region Sh 2-104 containing two star clusters, and the radio source NVSS J202032+363158. We also find that the hadronic scenario is the most likely in case of a single accelerator, and discuss the possible contribution from the sources mentioned above. Conclusions: Although the radio and GeV pulsar PSR J2021+3651 / AGL J2020.5+3653 and its associated pulsar wind nebula PWN G75.2+0.1 can contribute to the emission from MGRO J2019+37, extrapolation of the GeV spectrum does not explain the detected multi-TeV flux. Other sources discussed here could contribute to the emission of the Milagro source

Developing a Service-Oriented Software Platform

Tehokkaasti toimiva sähköinen tiedonvälitys yrityksen omien sovellusten välillä sekä sen liikekumppaneiden kanssa on kasvanut merkittäväksi yrityksen kilpailukykyä lisääväksi tekijäksi. Yritysten erilaiset tietojärjestelmät asettavat haasteita tehokkaalle tiedonvälitykselle näiden järjestelmien välillä. Perinteiset EDI teknologioihin perustuvat sähköisen tiedonvälityksen ratkaisut eivät pysty mukautumaan nykyisin nopeasti muuttuviin markkinatilanteisiin. Palvelukeskeiseen arkkitehtuuriin ja Web-palveluihin perustuvat teknologiat mahdollistavat mukautumisen erilaisiin muutoksiin liiketoiminnassa nopeammin ja helpommin. Lisäksi ne nopeuttavat tiedon integrointia erilaisten tietojärjestelmien välillä, koska tiedonvälityksessä käytetään yleisesti hyväksyttyihin standardeihin perustuvia tiedonsiirtoprotokollia sekä tietoformaatteja. Diplomityössä esitellään keskeiset teknologiat ja menetelmät sähköisen tiedonvälityksen toteuttamiseen. Lisäksi työssä vertaillaan erilaisia vaihtoehtoja, joilla sähköinen tiedonvälitys voidaan toteuttaa. Vaihtoehtoina työssä ovat tiedonvälityspalveluiden ostaminen toiselta yritykseltä, olemassa olevan valmiin ohjelmiston hyödyntäminen, tai kokonaan uuden sovellusalustan kehittäminen. Työssä kuvaillaan palvelukeskeisen sovellusalustan toteutus, joka mahdollistaa tehokkaan sekä joustavan tiedonvälityksen sovellusten välillä. Alustan tarjoamien palveluiden päälle voidaan rakentaa erilaisia liiketoimintaa tukevia palveluita, jotka voivat hyödyntää sovellusalustan tarjoamia toiminnallisuuksia. Alustan toteutusta arvioidaan kolmen liiketoimintaskenaarion toteutuksesta saatujen kokemusten perusteella.

Offshore Sourcing in Software Development: Case Studies of Finnish-Russian Cooperation

The study examines international cooperation in product development in software development organisations. The software industry is known for its global nature and knowledge-intensity, which makes it an interesting setting to examine international cooperation in. Software development processes are increasingly distributed worldwide, but for small or even medium-sized enterprises, typical for the software industry, such distribution of operations is often possible only in association with crossing the company’s boundaries. The strategic decision-making of companies is likely to be affected by the characteristics of the industry, and this includes decisions about cooperation or sourcing. The objective of this thesis is to provide a holistic view on factors affecting decisions about offshore sourcing in software development. Offshore sourcing refers to a cooperative mode of offshoring, where a firm does not establish its own presence in a foreign country, but utilises a local supplier. The study examines product development activities that are distributed across organisational and geographical boundaries. The objective can be divided into two subtopics: general reasons for international cooperation in product development and particular reasons for cooperation between Finnish and Russian companies. The focus is on the strategic rationale at the company level, in particular in small and medium-sized enterprises. The theoretical discourse of the study builds upon the literature on international cooperation and networking, with particular focus on cooperation with foreign suppliers and within product development activities. The resource-based view is also discussed, as heterogeneity and interdependency of the resources possessed by different firms are seen as factors motivating international cooperation. Strategically, sourcing can be used to access resources possessed by an industrial network, to enhance the product development of a firm, or to optimise its cost structure. In order to investigate the issues raised by the theoretical review, two empirical studies on international cooperation in software product development have been conducted. The emphasis of the empirical part of the study is on cooperation between Finnish and Russian companies. The data has been gathered through four case studies on Finnish software development organisations and four case studies on Russian offshore suppliers. Based on the material from the case studies, a framework clarifying and grouping the factors that influence offshore sourcing decisions has been built. The findings indicate that decisions regarding offshore sourcing in software development are far more complex than generally assumed. The framework provides a holistic view on factors affecting decisions about offshore sourcing in software development, capturing the multidimensionality of motives for entering offshore cooperation. Four groups of factors emerged from the data: A) strategy-related aspects, B) aspects related to resources and capabilities, C) organisation-related aspects, and D) aspects related to the entrepreneur or management. By developing a holistic framework of decision factors, the research offers in-depth theoreticalunderstanding of offshore sourcing rationale in product development. From the managerial point of view, the proposed framework sums up the issues that a firm should pay attention to when contemplating product development cooperation with foreign suppliers. Understanding different components of sourcing decisions can lead to improved preconditions for strategising and engaging in offshore cooperation. A thorough decisionmaking process should consider all the possible benefits and risks of product development cooperation carefully.

Análisis de barreras de transición a software libre y creación de un protocolo de implementación en centros educativos

A partir de la investigación desarrollada en el campo del software libre se pretende dar una visión de las cuestiones que existen a la hora de realizar una transición y migración a este tipo de software. Para ello se han estudiado los diferentes problemas existentes y todo el camino a recorrer para conseguir la implantación en centros educativos.

Radicais livres de oxigênio: um software introdutório

Though Free Radicals is one of the most frequently explored scientific subjects in mass communication media, the topic is absent of many Biochemistry introductory courses, especially those in which the students do not have a good chemical background. To overcome this contradictory situation we have developed a software treating this topic in a very simple way. The software is divided in four sections: (1) definition and description of free radicals, (2) production pathways, (3) mechanism of action and (4) enzymatic and non enzymatic protection. The instructional capacity of the software has been both qualitative and quantitatively evaluated through its application in undergraduate courses. The software is available in the INTERNET at the site: http://www.unicamp.br/ib/bioquimica/ensino.

Market Opportunities for Paper Industry in Radio Frequency Identification

The paper industry has been experiencing remarkable structural changes since paper demand growth has ceased and some markets are declining. One reason behind the declined demand is the Internet, which has partially substituted the newspaper as a source of information. Paper products alone can no longer provide livelihood, and the paper industry has to find new business areas. In this research, we studied radio frequency identification (RFID), and the market opportunities it could provide for paper industry. The research combined a quantitative industry analysis and qualitative interviews. RFID is a growing industry in the beginning of its life cycle, in which value chains and technologies still evolve significantly. The industry is going to concentrate on the future, and in the long term RFID-identifiers will probably be printed on paper substrate or directly onto products. Paper industry has the chance to enter the RFID industry, but it has to obtain the required competences, for example through acquisitions. The business potential RFID offers to paper industry is inadequate, and while reviewing new strategic options, the paper industry must consider more options, for example the entire printed intelligence.

Desarrollo de mejoras y nuevas funcionalidades a eXeLearning.net y colaboración con la comunidad de software libre exelearning.net

En este TFM se detallan las mejoras realizadas a la aplicación eXeLearning.net, así como otras aportaciones a la comunidad realizadas durante el proyecto de fin de máster de Software libre. eXeLearning.net es una aplicación de software libre para la creación de materiales educativos digitales, desarrollada en Python, con una interfaz web (HTML + JavaScript). En este proyecto se desarrollaron entre otras cosas: un repositorio de estilos en la web oficial de la aplicación, disponibles para su descarga desde la aplicación de escritorio, la creación y mantenimiento de un repositorio en Launchpad y una funcionalidad para publicar los contenidos creados con eXeLearning.net directamente en Google Drive.

The Design of a Software Lifecycle Management Framework to a Configuration Management System

Keeping track of software assets and managing software installations in IT environments can be a hard endeavor, especially when the size and diversity of the environment grows. How to install and uninstall software efficiently and cost effectively? Are there too few or too many software licenses purchased? If installed, is the software actually in use? Software Asset Management (SAM) is a process that involves managing and optimizing the purchase, deployment, maintenance, utilization, and disposal of software applications within an organization. This master’s thesis describes a special Software Lifecycle Management Framework to provide solutions to the multitude of challenges within SAM. The main objectives when designing the framework was to provide a set of tools to control the software assets during their entire lifecycle while trying to minimize the costs related to owning and managing them.

Implementación de un sistema de almacenamiento y distribución multi-centro de imágenes médicas, mediante software libre

Este trabajo de fin de grado plantea probar la viabilidad de realizar un sistema de almacenamiento y distribución de imágenes médicas, utilizando únicamente software de código abierto, libre distribución o gratuito.

Desarrollo rápido de software libre de alta calidad : Ingeniería de software asistida por computadora, enfocada en tareas, para agilizar el ciclo de vida de las aplicaciones, mediante mejora continua disciplinada a nivel personal

Este trabajo de investigación abarca el estudio, implementación y evaluación de diferentes herramientas, metodologías y procesos para la producción de software libre en el campo del desarrollo rápido de aplicaciones (RAD, precursor de metodologías ágiles como Scrum).

Revolución de los datos, cooperación y software libre : Estudio de caso sobre la implementación de plataformas basadas en software libre para la gestión del catastro municipal en las ciudades de Manihça, Inhambane y Maxixé (Mozambique)

Este artículo analiza el proceso de implementación de una plataforma municipal basada en el catastro para la recogida sistemática de datos para el diseño y monitoreo de las políticas públicas mediante el uso de aplicaciones de software libre en las ciudades mozambiqueñas de Manhiça, Inhambane y Maxixé, apuntando elementos para discernir en qué medida el uso de software libre es determinante o no en el éxito en la implementación de este tipo de plataformas.

Web services to link interlibrary software with OCLC WorldShare

Purpose - This article describes the use of web services to interconnect the GTBib interlibrary loan program with the OCLC WorldShare platform. Design/methodology/approach - We describe the current problem of duplication of procedures in libraries that have added their collections to the OCLC WorldCat catalogue in recent years and are therefore more likely to receive interlibrary loan requests through the WorldShare Platform. Findings - A solution that uses web services to insert and retrieve requests between the two systems is presented. Autonomous agents periodically check the status of the requests and keep them updated and synchronized. These agents also inform the library staff of any variation or inconsistency that is detected. Practical Implications - This technology reduces process management time by making it unnecessary to introduce the request data in both systems. Agents are used to check the consistency of statuses between the two systems, thus avoiding errors and omissions and improving the efficiency of the whole interlibrary loan process. Originality/value - This paper describes in detail the technical aspects of the solution as a reference for the development of future applications.

Radio Frequency Measurement Method for Detecting Bearing Currents in Induction Motors

Induction motors are widely used in industry, and they are generally considered very reliable. They often have a critical role in industrial processes, and their failure can lead to significant losses as a result of shutdown times. Typical failures of induction motors can be classified into stator, rotor, and bearing failures. One of the reasons for a bearing damage and eventually a bearing failure is bearing currents. Bearing currents in induction motors can be divided into two main categories; classical bearing currents and inverter-induced bearing currents. A bearing damage caused by bearing currents results, for instance, from electrical discharges that take place through the lubricant film between the raceways of the inner and the outer ring and the rolling elements of a bearing. This phenomenon can be considered similar to the one of electrical discharge machining, where material is removed by a series of rapidly recurring electrical arcing discharges between an electrode and a workpiece. This thesis concentrates on bearing currents with a special reference to bearing current detection in induction motors. A bearing current detection method based on radio frequency impulse reception and detection is studied. The thesis describes how a motor can work as a “spark gap” transmitter and discusses a discharge in a bearing as a source of radio frequency impulse. It is shown that a discharge, occurring due to bearing currents, can be detected at a distance of several meters from the motor. The issues of interference, detection, and location techniques are discussed. The applicability of the method is shown with a series of measurements with a specially constructed test motor and an unmodified frequency-converter-driven motor. The radio frequency method studied provides a nonintrusive method to detect harmful bearing currents in the drive system. If bearing current mitigation techniques are applied, their effectiveness can be immediately verified with the proposed method. The method also gives a tool to estimate the harmfulness of the bearing currents by making it possible to detect and locate individual discharges inside the bearings of electric motors.