Panel studies of new venture creation: a methods-focused review and suggestions for future research

Longitudinal panel studies of large, random samples of business start-ups captured at the pre-operational stage allow researchers to address core issues for entrepreneurship research, namely, the processes of creation of new business ventures as well as their antecedents and outcomes. Here, we perform a methods-orientated review of all 83 journal articles that have used this type of data set, our purpose being to assist users of current data sets as well as designers of new projects in making the best use of this innovative research approach. Our review reveals a number of methods issues that are largely particular to this type of research. We conclude that amidst exemplary contributions, much of the reviewed research has not adequately managed these methods challenges, nor has it made use of the full potential of this new research approach. Specifically, we identify and suggest remedies for context-specific and interrelated methods challenges relating to sample definition, choice of level of analysis, operationalization and conceptualization, use of longitudinal data and dealing with various types of problematic heterogeneity. In addition, we note that future research can make further strides towards full utilization of the advantages of the research approach through better matching (from either direction) between theories and the phenomena captured in the data, and by addressing some under-explored research questions for which the approach may be particularly fruitful.

Business service management : understanding business models

One of the prominent topics in Business Service Management is business models for (new) services. Business models are useful for service management and engineering as they provide a broader and more holistic perspective on services. Business models are particularly relevant for service innovation as this requires paying attention to the business models that make new services viable and business model innovation can drive the innovation of new and established services. Before we can have a look at business models for services, we first need to understand what business models are. This is not straight-forward as business models are still not well comprehended and the knowledge about business models is fragmented over different disciplines, such as information systems, strategy, innovation, and entrepreneurship. This whitepaper, ‘Understanding business models,’ introduces readers to business models. This whitepaper contributes to enhancing the understanding of business models, in particular the conceptualisation of business models by discussing and integrating business model definitions, frameworks and archetypes from different disciplines. After reading this whitepaper, the reader will have a well-developed understanding about what business models are and how the concept is sometimes interpreted and used in different ways. It will help the reader in assessing their own understanding of business models and that and of others. This will contribute to a better and more beneficial use of business models, an increase in shared understanding, and making it easier to work with business model techniques and tools.

Using virtual worlds for collaborative business process modeling

Purpose Process modeling is a complex organizational task that requires many iterations and communication between the business analysts and the domain specialists. The challenge of process modeling is exacerbated, when the process of modeling has to be performed in a cross-organizational, distributed environment. In this paper we suggest a 3D environment for collaborative process modeling, using Virtual World technology. Design/methodology/approach We suggest a new collaborative process modeling approach based on Virtual World technology. We describe the design of an innovative prototype collaborative process modeling approach, implemented as a 3D BPMN modeling environment in Second Life. We use a case study to evaluate the suggested approach. Findings Based on our case study application, we show that our approach increases user empowerment and adds significantly to the collaboration and consensual development of process models even when the relevant stakeholders are geographically dispersed. Research limitations implications – We present design work and a case study. More research is needed to more thoroughly evaluate the presented approach in a variety of real-life process modeling settings. Practical implications Our research outcomes as design artifacts are directly available and applicable by business process management professionals and can be used by business, system and process analysts in real-world practice. Originality/value Our research is the first reported attempt to develop a process modeling approach on the basis of virtual world technology. We describe a novel and innovative 3D BPMN modeling environment in Second Life.

A socially responsible model of micro-credit delivery to support sustainable community development in emerging economies

Micro-finance, which includes micro-credit as one of its core services, has become an important component of a range of business models – from those that operate on a strictly economic basis to those that come from a philanthropic base, through Non Government Organisations (NGOs). Its success is often measured by the number of loans issued, their size, and the repayment rates. This paper has a dual purpose: to identify whether the models currently used to deliver micro-credit services to the poor are socially responsible and to suggest a new model of delivery that addresses some of the social responsibility issues, while supporting community development. The proposed model is currently being implemented in Beira, the second largest city in Mozambique. Mozambique exhibits many of the characteristics found in other African countries so the model, if successful, may have implications for other poor African nations as well as other developing economies.

The Aboriginal version of Ken Done ... banal aboriginal identities in Australia

Histories of representation of Blackness are quite distinct in Australia and in America. Indigenous Australian identities have been consistently 'fatal', in Baudrillard's use of that term. So, while Black American representation includes intensely banal images of middle-class, materialistic individuals, such histories are largely absent in the Australian context. This implies that the few such representations which do occur — and particularly those of everyday game shows such as Sale of the Century and Family Feud — are particularly important for presenting a trivial, unexciting version of Aboriginality. This also clarifies the distinction between American and Australian versions of Blackness, and suggests that the latter set of representations might be more usefully viewed in relation to Native American rather than Black American images. The status of indigeneity might prove to be more relevant to Australian Aboriginal representation than the previously favoured identity of skin colour (Blackness).

A matter of approval

A contract for the sale of a mixed farming property fronting the Murrumbidgee River provided the basis for a dispute that recently found its way to the High Court. The decision is Park v Brothers [2005] HCA 73. Although largely concerned with appellate court practice and procedure, the decision will also be of interest to those practising in property law and general contract law.

'Attaching' warning statements by facsimile consumer protection prevails!

Section 366 of the Property Agents and Motor Dealers Act 2000 (Qld) (‘PAMDA’) mandates that all contracts for the sale of residential property in Queensland (other than contracts formed on a sale by auction) have a warning statement ‘attached’ as the first or top sheet. Alternative judicial views have emerged concerning the possibility of attaching a warning statement to a contract sent by facsimile. In recognition of the consumer protection nature of the legislation, in MP Management (Aust) Pty Ltd v Churven [2002] QSC 320 Muir J favoured a restrictive view of the word ‘attached’ requiring physical joinder of the warning statement to the relevant contract. In contrast, in MNM Developments Pty Ltd v Gerrard [2005] QDC 10 Newton DCJ opined that the requirements of the PAMDA could be met where the warning statement preceded the contract of sale in a facsimile transmission sent in one continuous stream. Newton DCJ considered that this broader approach promoted commercial convenience. In an appeal from the decision of Newton DCJ, in MNM Developments Pty Ltd v Gerrard [2005] QCA 230 a majority of the Queensland Court of Appeal has held that the restrictive view propounded by Muir J is correct. Notwithstanding possible commercial inconvenience, it is not possible for a warning statement to be attached to a contract sent by facsimile.

When is a warning statement “attached” to a contract?

Section 366 of the Property Agents and Motor Dealers Act 2000 (Qld) provides that all contracts for the sale of residential property in Queensland (other than contracts formed on a sale by auction) should have “attached” as the first or top sheet a warning statement in the approved form. The section does not explain or define the meaning of the word “attached”. Further, the section does not contemplate the situation where the contract is faxed to a potential buyer for execution.

Enhancing business continuity management capacities in the insurance industry : a Southeast Asian perspective

As a resilience enhancing practice, business continuity management (BCM) can play an important role in aiding preparation of the insurance industry for coping with the losses incurred by major discontinuity incidents: regardless of cause. Acknowledging the increasing frequency of unpredictable man-made disasters and natural catastrophes, the insurance industry would benefit from examining and implementing, where suitable, key elements of BCM. Such strategic decisions would assist insurers and re-insurers collectively to enhance mutual capability to respond to, and recover from, the impact of significant losses. This paper presents a comparison of opinions about BCM practitioners in both retail and re-insurance companies on the importance of generic continuity practices with actual levels of BCM practice across the two industry groups in Southeast Asia. It suggests means by which multi-lateral cooperation across Asian economies and between retail and re-insurance market segments might enhance the viability of the insurance industry in the face of increased stress from major natural and socio-technical hazards.

Land Contracts in Queensland [3rd ed]

Land Contracts in Queensland provides a thorough, user-friendly account of the law relating to buying and selling freehold land in Queensland. The authors analyse the substance of the transaction through the medium of standard contracts, and draw on a comprehensive range of court decisions relating to the area. There are chapters covering the role of the real estate agent, the disclosure regime for sellers and agents, the inclusion of special conditions, and stamp duty and GST implications.

Post-PC devises : a summary of early iPad technology

In just under 3 months worldwide sales of Apple's iPad tablet device stood at over 3 million units sold. The iPad device, along with rival products signify a shift in the way in which print and other media products are purchased and consumed by users. While facing initial skepticism about the uptake of the device numerous industries have been quick to adapt the device to their specific needs. Based around a newly developed six point typology of “post PC” device utility this project undertook a significant review of publicly available material to identify worldwide trends in iPad adoption and use within the tertiary sector.

Business cycle dynamics with duration dependence and leading indicators

Durland and McCurdy [Durland, J.M., McCurdy, T.H., 1994. Duration-dependent transitions in a Markov model of US GNP growth. Journal of Business and Economic Statistics 12, 279–288] investigated the issue of duration dependence in US business cycle phases using a Markov regime-switching approach, introduced by Hamilton [Hamilton, J., 1989. A new approach to the analysis of time series and the business cycle. Econometrica 57, 357–384] and extended to the case of variable transition parameters by Filardo [Filardo, A.J., 1994. Business cycle phases and their transitional dynamics. Journal of Business and Economic Statistics 12, 299–308]. In Durland and McCurdy’s model duration alone was used as an explanatory variable of the transition probabilities. They found that recessions were duration dependent whilst expansions were not. In this paper, we explicitly incorporate the widely-accepted US business cycle phase change dates as determined by the NBER, and use a state-dependent multinomial Logit modelling framework. The model incorporates both duration and movements in two leading indexes – one designed to have a short lead (SLI) and the other designed to have a longer lead (LLI) – as potential explanatory variables. We find that doing so suggests that current duration is not only a significant determinant of transition out of recessions, but that there is some evidence that it is also weakly significant in the case of expansions. Furthermore, we find that SLI has more informational content for the termination of recessions whilst LLI does so for expansions.

The adoption of advanced quality practices and its impact on manufacturers

Presently, the manufacturing sector faces unprecedented levels of competition in both the domestic and international markets. This competition is mainly as a result of rapidly expanding international trade, gradual removal of protection, substantial reforms in labour markets and industrial relations, rapid technological changes and discerning customers. Intense global competition requires manufacturers to deliver products with higher quality in a shorter time. Simultaneously, owing to new technological innovations, the complexity of the products is increasing. In Australia, the impact of this intense competition and structural changes appear to be having negative effects on the manufacturing sector. This paper discusses the quality and reliability (Q & R) practices and associated drawbacks of Australian manufacturers and presents the findings of an investigation of the challenges Australian manufacturers are currently facing. The results reported in the paper are based on the data collected from a survey using the standard questionnaire. The study was driven by a conceptual model, which relates advanced quality practices to manufacturing performance and manufacturing difficulties.Evidence indicates that Q & R is the main competitive factor for Australian manufacturers. Design capability and on time delivery (OTD) came second. Results show that Australian manufacturers in general are facing some manufacturing difficulties. The relationship between advanced quality practices and company performance and manufacturing difficulties are explored. It is found that the companies who have more emphasis on advanced quality practices have fewer problems in manufacturing practices. Moreover, companies who have actively implemented the advanced quality practices have managed to improve the quality of the product continuously. The results validate the proposed hypothesis and lend credence to current thinking that improvement in Q & R is a vital tool for competitive advantage.

Scaling analysis of the unsteady natural convection boundary layer adjacent to an inclined plate for Pr > 1 following instantaneous heating

The unsteady natural convection boundary layer adjacent to an instantaneously heated inclined plate is investigated using an improved scaling analysis and direct numerical simulations. The development of the unsteady natural convection boundary layer following instantaneous heating may be classified into three distinct stages including a start-up stage, a transitional stage and a steady state stage, which can be clearly identified in the analytical and numerical results. Major scaling relations of the velocity and thicknesses and the flow development time of the natural convection boundary layer are obtained using triple-layer integral solutions and verified by direct numerical simulations over a wide range of flow parameters.