Learning from Text: Examining Teacher Thinking and Practice in AP Environmental Science

Thesis (Ph.D.)--University of Washington, 2016-08

Évolution des aptitudes physiques et motrices d’élèves-athlètes inscrits dans un programme de spécialisation sportive et d’élèves-athlètes inscrits dans un programme de diversification sportive.

Résumé : L’entrainement sportif est « un processus de perfectionnement de l’athlète dirigé selon des principes scientifiques et qui, par des influences planifiées et systématiques (charges) sur la capacité de performance, vise à mener le sportif vers des performances élevées et supérieures dans un sport ou une discipline sportive » (Harre, 1982). Un entrainement sportif approprié devrait commencer dès l’enfance. Ainsi, le jeune sportif pourrait progressivement et systématiquement développer son corps et son esprit afin d’atteindre l’excellence sportive (Bompa, 2000; Weineck, 1997). Or plusieurs entraineurs, dans leur tentative de parvenir à des résultats de haut niveau rapidement, exposent les jeunes athlètes à une formation sportive très spécifique et rigoureuse, sans prendre le temps de développer convenablement les aptitudes physiques et motrices et les habiletés motrices fondamentales sous-jacentes aux habiletés sportives spécifiques (Bompa, 2000), d’où l’appellation « spécialisation hâtive ». Afin de contrer les conséquences néfastes de la spécialisation hâtive, de nouvelles approches d’entrainement ont été proposées. Une des façons d’y arriver consisterait notamment à pratiquer différents sports en bas âge (Fraser-Thomas, Côté et Deakin, 2008; Gould et Carson, 2004; Judge et Gilreath, 2009; LeBlanc et Dickson, 1997; Mostafavifar, Best et Myer, 2013), d’où l’appellation « diversification sportive ». Plusieurs organisations sportives et professionnelles ont décidé de valoriser et de mettre en place des programmes basés sur la diversification sportive (Kaleth et Mikesky, 2010). C’est donc à la suite d’une prise de conscience des effets néfastes de la spécialisation hâtive que des professionnels de l’activité physique d’une école secondaire du Québec (éducateur physique, kinésiologue et agent de développement sportif) ont mis en place un programme multisports-études novateur au premier cycle du secondaire, inspiré des sciences du sport et des lignes directrices du modèle de développement à long terme de l’athlète (DLTA) (Balyi, Cardinal, Higgs, Norris et Way, 2005). Le présent projet de recherche porte sur le développement des aptitudes physiques et motrices chez de jeunes sportifs inscrits à un programme de spécialisation sportive et de jeunes sportifs inscrits à un programme de diversification sportive à l’étape « S’entrainer à s’entrainer » (12 à 16 ans) du modèle de développement à long terme de l’athlète (Balyi et al., 2005). L’objectif principal de cette étude est de rendre compte de l’évolution des aptitudes physiques et motrices de jeunes élèves-athlètes inscrits, d’une part, à un programme sport-études soccer (spécialisation) et, d’autre part, à un programme multisports-études (diversification). Plus spécifiquement, cette étude tente de (a) dresser un portrait détaillé de l’évolution des aptitudes physiques et motrices des élèves-athlètes de chaque programme et de faire un parallèle avec la planification annuelle de chaque programme sportif et (b) de rendre compte des différences d’aptitudes physiques et motrices observées entre les deux programmes. Le projet de recherche a été réalisé dans une école secondaire de la province de Québec. Au total, 53 élèves-athlètes de première secondaire ont été retenus pour le projet de recherche selon leur volonté de participer à l’étude, soit 23 élèves-athlètes de première secondaire inscrits au programme sport-études soccer et 30 élèves-athlètes de première secondaire inscrits au programme multisports-études. Les élèves-athlètes étaient tous âgés de 11 à 13 ans. Treize épreuves standardisées d’aptitudes physiques et motrices ont été administrées aux élèves-athlètes des deux programmes sportifs en début, en milieu et en fin d’année scolaire. Le traitement des données s’est effectué à l’aide de statistiques descriptives et d’une analyse de variance à mesures répétées. Les résultats révèlent que (a) l’ensemble des aptitudes physiques et motrices des élèves-athlètes des deux programmes sportifs se sont améliorées au cours de l’année scolaire, (b) il est relativement facile de faire un parallèle entre l’évolution des aptitudes physiques et motrices des élèves-athlètes et la planification annuelle de chaque programme sportif, (c) les élèves-athlètes du programme multisports-études ont, en général, des performances semblables à celles des élèves-athlètes du programme sport-études soccer et (d) les élèves-athlètes du programme sport-études soccer ont, au cours de l’année scolaire, amélioré davantage leur endurance cardiorespiratoire, alors que ceux du programme multisports-études ont amélioré davantage (a) leur vitesse segmentaire des bras, (b) leur agilité à l’épreuve de course en cercle et (c) leur puissance musculaire des membres inférieurs, confirmant ainsi que les aptitudes physiques et motrices développées chez de jeunes athlètes qui se spécialisent tôt sont plutôt spécifiques au sport pratiqué (Balyi et al., 2005; Bompa, 1999; Cloes, Delfosse, Ledent et Piéron, 1994; Mattson et Richards, 2010), alors que celles développées à travers la diversification sportive sont davantage diversifiées (Coakley, 2010; Gould et Carson, 2004; White et Oatman, 2009). Ces résultats peuvent s’expliquer par (a) la spécificité ou la diversité des tâches proposées durant les séances d’entrainement, (b) le temps consacré à chacune de ces tâches et (c) les exigences reliées à la pratique du soccer comparativement aux exigences reliées à la pratique de plusieurs disciplines sportives. Toutefois, les résultats obtenus restent complexes à interpréter en raison de différents biais : (a) la maturation physique, (b) le nombre d’heures d’entrainement effectué au cours de l’année scolaire précédente, (c) le nombre d’heures d’entrainement offert par les deux programmes sportifs à l’étude et (d) les activités physiques et sportives pratiquées à l’extérieur de l’école. De plus, cette étude ne permet pas d’évaluer la qualité des interventions et des exercices proposés lors des entrainements ni la motivation des élèves-athlètes à prendre part aux séances d’entrainement ou aux épreuves physiques et motrices. Finalement, il serait intéressant de reprendre la présente étude auprès de disciplines sportives différentes et de mettre en évidence les contributions particulières de chaque discipline sportive sur le développement des aptitudes physiques et motrices de jeunes athlètes.

Evolution of an Interactive Online Magazine for Students, Academics and Expert Practitioners to Engage Students in ESD

Urgency to embed awareness of sustainability principles and practice across society, and need for digital literacy and advocacy for sustainability are reshaping ESD. These, together with developments in learning and teaching, demand new tools to support implementation of project-based learning and more interactive approaches. This investigation explores the evolution of susthingsout.com, an online magazine for students, academics and expert practitioners, developed by the University of Worcester. This comprises two parts; the first, a private site specifically for students involved in sustainability learning on-campus; the second, an open-access site developed to deliver sustainability information and good practice across campus, community and not-for-profit and commercial organisations. This paper involves only the private site i.e. the equivalent of an in-house VLE specifically designed to support the teaching of sustainability to multi-disciplinary first and second year undergraduate students. It reports on the progress of the VLE, following three years of use and initial improvements, in terms of the student support and engagement, as well as considering the practical issues affecting these. The results fall into four categories of pedagogical, operational, cultural and external factors, which are synthesised to capture and share emerging knowledge of good practice offering insights to other developers of online sustainability materials.

Évaluation de la modélisation de la taille de grain de neige du modèle multi-couches thermodynamique SNOWPACK: implication dans l'évaluation des risques d'avalanches

Résumé: L’Institut pour l'étude de la neige et des avalanches en Suisse (SLF) a développé SNOWPACK, un modèle thermodynamique multi-couches de neige permettant de simuler les propriétés géophysiques du manteau neigeux (densité, température, taille de grain, teneur en eau, etc.) à partir desquelles un indice de stabilité est calculé. Il a été démontré qu’un ajustement de la microstructure serait nécessaire pour une implantation au Canada. L'objectif principal de la présente étude est de permettre au modèle SNOWPACK de modéliser de manière plus réaliste la taille de grain de neige et ainsi obtenir une prédiction plus précise de la stabilité du manteau neigeux à l’aide de l’indice basé sur la taille de grain, le Structural Stability Index (SSI). Pour ce faire, l’erreur modélisée (biais) par le modèle a été analysée à l’aide de données précises sur le terrain de la taille de grain à l’aide de l’instrument IRIS (InfraRed Integrated Sphere). Les données ont été recueillies durant l’hiver 2014 à deux sites différents au Canada : parc National des Glaciers, en Colombie-Britannique ainsi qu’au parc National de Jasper. Le site de Fidelity était généralement soumis à un métamorphisme à l'équilibre tandis que celui de Jasper à un métamorphisme cinétique plus prononcé. Sur chacun des sites, la stratigraphie des profils de densités ainsi des profils de taille de grain (IRIS) ont été complétés. Les profils de Fidelity ont été complétés avec des mesures de micropénétromètre (SMP). L’analyse des profils de densité a démontré une bonne concordance avec les densités modélisées (R[indice supérieur 2]=0.76) et donc la résistance simulée pour le SSI a été jugée adéquate. Les couches d’instabilités prédites par SNOWPACK ont été identifiées à l’aide de la variation de la résistance dans les mesures de SMP. L’analyse de la taille de grain optique a révélé une surestimation systématique du modèle ce qui est en accord avec la littérature. L’erreur de taille de grain optique dans un environnement à l’équilibre était assez constante tandis que l’erreur en milieux cinétique était plus variable. Finalement, une approche orientée sur le type de climat représenterait le meilleur moyen pour effectuer une correction de la taille de grain pour une évaluation de la stabilité au Canada.

Higher Education - Border or Boundary? Can Theatre in Education Help Promote a University Education?

With the expansion and increased availability of Higher Education the progression to study for an undergraduate degree has been viewed as a simple stepping stone with examination success a straight - forward border pass. Changes in the funding of degree courses has established a series of more challenging boundaries to entry which demand a rigorous assessment of the benefits of Higher Education. The Widening Participation Unit at The University of Worcester has sought to ease this border crossing for pupils whose parents have not been to university. Their experience from previous projects was that school pupils more easily relate to undergraduate students whose experience of Higher Education is recent and relevant. With this in mind they commissioned the Drama and Performance Department to create a Theatre in Education programme that introduced an awareness of post sixteen options and future choices to challenge Higher Education stereotypes. As a result of this collaboration Why Bother? was created, directed by myself and devised and researched with four students who were studying drama. Their own experiences were used to inform the character development and dealt with worrying as a mature student about integration into full – time education, loss of income after working, the pressures of emotional commitments to partners and being away from home. The programme toured to two thousand year 9 – 11 pupils in Worcestershire and Herefordshire schools in January and May 2011. Devising and touring Why Bother provided students with an opportunity to work as a professional paid TIE team that it is not possible for them to do as part of their undergraduate degree course. My initial research looks at the effectiveness and limitations of this project based on pupil questionnaires and the experiences of the team which are explored within the broader context of TIE and its potential for affecting attitudinal change. This has given rise to a number of questions that need consideration in the development of a new TIE programme aimed at raising the awareness of sixth form students who are about to make the decision whether to apply to university or not. Collaboration with university students in exploring the value of an education that they have subscribed to raises issues of bias and whether their powers of persuasion actually prevent pupils from making their own individual decision. The ethics of promoting a “free” university education seem much less complex than the decision required now which involves balancing the real value against the high financial cost suggested in the working title of Is it Worth it? This paper will present my first attempts to develop research methods and methodologies that will enable me to evaluate the success of this and future TIE.

Environmental impacts of freshwater use and suspended solids in life cycle assessment

Perturbation of natural ecosystems, namely by increasing freshwater use and its degradative use, as well as topsoil erosion by water of land-use production systems, have been emerging as topics of high environmental concern. Freshwater use has become a focus of attention in the last few years for all stakeholders involved in the production of goods, mainly agro-industrial and forest-based products, which are freshwater-intensive consumers, requiring large inputs of green and blue water. This thesis presents a global review on the available Water Footprint Assessment and Life Cycle Assessment (LCA)-based methods for measuring and assessing the environmental relevance of freshwater resources use, based on a life cycle perspective. Using some of the available midpoint LCA-based methods, the freshwater use-related impacts of a Portuguese wine (white ‘vinho verde’) were assessed. However, the relevance of environmental green water has been neglected because of the absence of a comprehensive impact assessment method associated with green water flows. To overcome this constraint, this thesis helps to improve and enhance the LCA-based methods by providing a midpoint and spatially explicit Life Cycle Impact Assessment (LCIA) method for assessing impacts on terrestrial green water flow and addressing reductions in surface blue water production caused by reductions in surface runoff due to land-use production systems. The applicability of the proposed method is illustrated by a case study on Eucalyptus globulus conducted in Portugal, as the growth of short rotation forestry is largely dependent on local precipitation. Topsoil erosion by water has been characterised as one of the most upsetting problems for rivers. Because of this, this thesis also focuses on the ecosystem impacts caused by suspended solids (SS) from topsoil erosion that reach freshwater systems. A framework to conduct a spatially distributed SS delivery to freshwater streams and a fate and effect LCIA method to derive site-specific characterisation factors (CFs) for endpoint damage on aquatic ecosystem diversity, namely on algae, macrophyte, and macroinvertebrates organisms, were developed. The applicability of this framework, combined with the derived site-specific CFs, is shown by conducting a case study on E. globulus stands located in Portugal as an example of a land use based system. A spatially explicit LCA assessment was shown to be necessary, since the impacts associated with both green water flows and SS vary greatly as a function of spatial location.

Functional alkali tantalate 2D structures for microelectronics and related applications

Alkali tantalates and niobates, including K(Ta / Nb)O3, Li(Ta / Nb)O3 and Na(Ta / Nb)O3, are a very promising ferroic family of lead-free compounds with perovskite-like structures. Their versatile properties make them potentially interesting for current and future application in microelectronics, photocatalysis, energy and biomedics. Among them potassium tantalate, KTaO3 (KTO), has been raising interest as an alternative for the well-known strontium titanate, SrTiO3 (STO). KTO is a perovskite oxide with a quantum paraelectric behaviour when electrically stimulated and a highly polarizable lattice, giving opportunity to tailor its properties via external or internal stimuli. However problems related with the fabrication of either bulk or 2D nanostructures makes KTO not yet a viable alternative to STO. Within this context and to contribute scientifically to the leverage tantalate based compounds applications, the main goals of this thesis are: i) to produce and characterise thin films of alkali tantalates by chemical solution deposition on rigid Si based substrates, at reduced temperatures to be compatible with Si technology, ii) to fulfil scientific knowledge gaps in these relevant functional materials related to their energetics and ii) to exploit alternative applications for alkali tantalates, as photocatalysis. In what concerns the synthesis attention was given to the understanding of the phase formation in potassium tantalate synthesized via distinct routes, to control the crystallization of desired perovskite structure and to avoid low temperature pyrochlore or K-deficient phases. The phase formation process in alkali tantalates is far from being deeply analysed, as in the case of Pb-containing perovskites, therefore the work was initially focused on the process-phase relationship to identify the driving forces responsible to regulate the synthesis. Comparison of phase formation paths in conventional solid-state reaction and sol-gel method was conducted. The structural analyses revealed that intermediate pyrochlore K2Ta2O6 structure is not formed at any stage of the reaction using conventional solid-state reaction. On the other hand in the solution based processes, as alkoxide-based route, the crystallization of the perovskite occurs through the intermediate pyrochlore phase; at low temperatures pyrochlore is dominant and it is transformed to perovskite at >800 °C. The kinetic analysis carried out by using Johnson-MehlAvrami-Kolmogorow model and quantitative X-ray diffraction (XRD) demonstrated that in sol-gel derived powders the crystallization occurs in two stages: i) at early stage of the reaction dominated by primary nucleation, the mechanism is phase-boundary controlled, and ii) at the second stage the low value of Avrami exponent, n ~ 0.3, does not follow any reported category, thus not permitting an easy identification of the mechanism. Then, in collaboration with Prof. Alexandra Navrotsky group from the University of California at Davis (USA), thermodynamic studies were conducted, using high temperature oxide melt solution calorimetry. The enthalpies of formation of three structures: pyrochlore, perovskite and tetragonal tungsten bronze K6Ta10.8O30 (TTB) were calculated. The enthalpies of formation from corresponding oxides, ∆Hfox, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -203.63 ± 2.84 kJ/mol, - 358.02 ± 3.74 kJ/mol, and -1252.34 ± 10.10 kJ/mol, respectively, whereas from elements, ∆Hfel, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -1408.96 ± 3.73 kJ/mol, -2790.82 ± 6.06 kJ/mol, and -13393.04 ± 31.15 kJ/mol, respectively. The possible decomposition reactions of K-deficient KTa2.2O6 pyrochlore to KTaO3 perovskite and Ta2O5 (reaction 1) or to TTB K6Ta10.8O30 and Ta2O5 (reaction 2) were proposed, and the enthalpies were calculated to be 308.79 ± 4.41 kJ/mol and 895.79 ± 8.64 kJ/mol for reaction 1 and reaction 2, respectively. The reactions are strongly endothermic, indicating that these decompositions are energetically unfavourable, since it is unlikely that any entropy term could override such a large positive enthalpy. The energetic studies prove that pyrochlore is energetically more stable phase than perovskite at low temperature. Thus, the local order of the amorphous precipitates drives the crystallization into the most favourable structure that is the pyrochlore one with similar local organization; the distance between nearest neighbours in the amorphous or short-range ordered phase is very close to that in pyrochlore. Taking into account the stoichiometric deviation in KTO system, the selection of the most appropriate fabrication / deposition technique in thin films technology is a key issue, especially concerning complex ferroelectric oxides. Chemical solution deposition has been widely reported as a processing method to growth KTO thin films, but classical alkoxide route allows to crystallize perovskite phase at temperatures >800 °C, while the temperature endurance of platinized Si wafers is ~700 °C. Therefore, alternative diol-based routes, with distinct potassium carboxylate precursors, was developed aiming to stabilize the precursor solution, to avoid using toxic solvents and to decrease the crystallization temperature of the perovskite phase. Studies on powders revealed that in the case of KTOac (solution based on potassium acetate), a mixture of perovskite and pyrochlore phases is detected at temperature as low as 450 °C, and gradual transformation into monophasic perovskite structure occurs as temperature increases up to 750 °C, however the desired monophasic KTaO3 perovskite phase is not achieved. In the case of KTOacac (solution with potassium acetylacetonate), a broad peak is detected at temperatures <650 °C, characteristic of amorphous structures, while at higher temperatures diffraction lines from pyrochlore and perovskite phases are visible and a monophasic perovskite KTaO3 is formed at >700 °C. Infrared analysis indicated that the differences are due to a strong deformation of the carbonate-based structures upon heating. A series of thin films of alkali tantalates were spin-coated onto Si-based substrates using diol-based routes. Interestingly, monophasic perovskite KTaO3 films deposited using KTOacac solution were obtained at temperature as low as 650 °C; films were annealed in rapid thermal furnace in oxygen atmosphere for 5 min with heating rate 30 °C/sec. Other compositions of the tantalum based system as LiTaO3 (LTO) and NaTaO3 (NTO), were successfully derived as well, onto Si substrates at 650 °C as well. The ferroelectric character of LTO at room temperature was proved. Some of dielectric properties of KTO could not be measured in parallel capacitor configuration due to either substrate-film or filmelectrode interfaces. Thus, further studies have to be conducted to overcome this issue. Application-oriented studies have also been conducted; two case studies: i) photocatalytic activity of alkali tantalates and niobates for decomposition of pollutant, and ii) bioactivity of alkali tantalate ferroelectric films as functional coatings for bone regeneration. Much attention has been recently paid to develop new type of photocatalytic materials, and tantalum and niobium oxide based compositions have demonstrated to be active photocatalysts for water splitting due to high potential of the conduction bands. Thus, various powders of alkali tantalates and niobates families were tested as catalysts for methylene blue degradation. Results showed promising activities for some of the tested compounds, and KNbO3 is the most active among them, reaching over 50 % degradation of the dye after 7 h under UVA exposure. However further modifications of powders can improve the performance. In the context of bone regeneration, it is important to have platforms that with appropriate stimuli can support the attachment and direct the growth, proliferation and differentiation of the cells. In lieu of this here we exploited an alternative strategy for bone implants or repairs, based on charged mediating signals for bone regeneration. This strategy includes coating metallic 316L-type stainless steel (316L-SST) substrates with charged, functionalized via electrical charging or UV-light irradiation, ferroelectric LiTaO3 layers. It was demonstrated that the formation of surface calcium phosphates and protein adsorption is considerably enhanced for 316L-SST functionalized ferroelectric coatings. Our approach can be viewed as a set of guidelines for the development of platforms electrically functionalized that can stimulate tissue regeneration promoting direct integration of the implant in the host tissue by bone ingrowth and, hence contributing ultimately to reduce implant failure.

Performance analysis in soccer: applications of player tracking technology

The aim of this thesis was threefold, firstly, to compare current player tracking technology in a single game of soccer. Secondly, to investigate the running requirements of elite women’s soccer, in particular the use and application of athlete tracking devices. Finally, how can game style be quantified and defined. Study One compared four different match analysis systems commonly used in both research and applied settings: video-based time-motion analysis, a semi-automated multiple camera based system, and two commercially available Global Positioning System (GPS) based player tracking systems at 1 Hertz (Hz) and 5 Hz respectively. A comparison was made between each of the systems when recording the same game. Total distance covered during the match for the four systems ranged from 10 830 ± 770 m (semi-automated multiple camera based system) to 9 510 ± 740m (video-based time-motion analysis). At running speeds categorised as high-intensity running (>15 km⋅h-1), the semi-automated multiple camera based system reported the highest distance of 2 650 ± 530 m with video-based time-motion analysis reporting the least amount of distance covered with 1 610 ± 370 m. At speeds considered to be sprinting (>20 km⋅h-1), the video-based time-motion analysis reported the highest value (420 ± 170 m) and 1 Hz GPS units the lowest value (230 ± 160 m). These results demonstrate there are differences in the determination of the absolute distances, and that comparison of results between match analysis systems should be made with caution. Currently, there is no criterion measure for these match analysis methods and as such it was not possible to determine if one system was more accurate than another. Study Two provided an opportunity to apply player-tracking technology (GPS) to measure activity profiles and determine the physical demands of Australian international level women soccer players. In four international women’s soccer games, data was collected on a total of 15 Australian women soccer players using a 5 Hz GPS based athlete tracking device. Results indicated that Australian women soccer players covered 9 140 ± 1 030 m during 90 min of play. The total distance covered by Australian women was less than the 10 300 m reportedly covered by female soccer players in the Danish First Division. However, there was no apparent difference in the estimated "#$%&', as measured by multi-stage shuttle tests, between these studies. This study suggests that contextual information, including the “game style” of both the team and opposition may influence physical performance in games. Study Three examined the effect the level of the opposition had on the physical output of Australian women soccer players. In total, 58 game files from 5 Hz athlete-tracking devices from 13 international matches were collected. These files were analysed to examine relationships between physical demands, represented by total distance covered, high intensity running (HIR) and distances covered sprinting, and the level of the opposition, as represented by the Fédération Internationale de Football Association (FIFA) ranking at the time of the match. Higher-ranking opponents elicited less high-speed running and greater low-speed activity compared to playing teams of similar or lower ranking. The results are important to coaches and practitioners in the preparation of players for international competition, and showed that the differing physical demands required were dependent on the level of the opponents. The results also highlighted the need for continued research in the area of integrating contextual information in team sports and demonstrated that soccer can be described as having dynamic and interactive systems. The influence of playing strategy, tactics and subsequently the overall game style was highlighted as playing a significant part in the physical demands of the players. Study Four explored the concept of game style in field sports such as soccer. The aim of this study was to provide an applied framework with suggested metrics for use by coaches, media, practitioners and sports scientists. Based on the findings of Studies 1- 3 and a systematic review of the relevant literature, a theoretical framework was developed to better understand how a team’s game style could be quantified. Soccer games can be broken into key moments of play, and for each of these moments we categorised metrics that provide insight to success or otherwise, to help quantify and measure different methods of playing styles. This study highlights that to date, there had been no clear definition of game style in team sports and as such a novel definition of game style is proposed that can be used by coaches, sport scientists, performance analysts, media and general public. Studies 1-3 outline four common methods of measuring the physical demands in soccer: video based time motion analysis, GPS at 1 Hz and at 5 Hz and semiautomated multiple camera based systems. As there are no semi-automated multiple camera based systems available in Australia, primarily due to cost and logistical reasons, GPS is widely accepted for use in team sports in tracking player movements in training and competition environments. This research identified that, although there are some limitations, GPS player-tracking technology may be a valuable tool in assessing running demands in soccer players and subsequently contribute to our understanding of game style. The results of the research undertaken also reinforce the differences between methods used to analyse player movement patterns in field sports such as soccer and demonstrate that the results from different systems such as GPS based athlete tracking devices and semi-automated multiple camera based systems cannot be used interchangeably. Indeed, the magnitude of measurement differences between methods suggests that significant measurement error is evident. This was apparent even when the same technologies are used which measure at different sampling rates, such as GPS systems using either 1 Hz or 5 Hz frequencies of measurement. It was also recognised that other factors influence how team sport athletes behave within an interactive system. These factors included the strength of the opposition and their style of play. In turn, these can impact the physical demands of players that change from game to game, and even within games depending on these contextual features. Finally, the concept of what is game style and how it might be measured was examined. Game style was defined as "the characteristic playing pattern demonstrated by a team during games. It will be regularly repeated in specific situational contexts such that measurement of variables reflecting game style will be relatively stable. Variables of importance are player and ball movements, interaction of players, and will generally involve elements of speed, time and space (location)".

Improving the freshman electrical and computer engineering lab

This thesis covers the challenges of creating and maintaining an introductory engineering laboratory. The history of the University of Illinois Electrical and Computer Engineering department’s introductory course, ECE 110, is recounted. The current state of the course, as of Fall 2008, is discussed along with current challenges arising from the use of a hand-wired prototyping board with logic gates. A plan for overcoming these issues using a new microcontroller-based board with a pseudo hardware description language is discussed. The new microcontroller based system implementation is extensively detailed along with its new accompanying description language. This new system was tried in several sections of the Fall 2008 semester alongside the old system; the students’ final performances with the two different approaches are compared in terms of design, performance, complexity, and enjoyment. The system in its first run shows great promise, increasing the students’ enjoyment, and improving the performance of their designs.

Technical and Didactical Scenarios of Student-centered Teaching and Learning

In this paper we envision didactical concepts for university education based on self-responsible and project-based learning and outline principles of adequate technical support. We use the scenario technique describing how a fictive student named Anna organizes her studies of informatics at a fictive university from the first days of her studies to make a career for herself.(DIPF/Orig.)

WebQuest: Incidencia en el aprendizaje significativo para la educación superior

El presente artículo explora el uso de la WebQuest como metodología del Aprendizaje Basado en Proyectos Colaborativos en la formación de estudiantes de educación superior de la Escuela de Ingeniería Mecánica de la Escuela Superior Politécnica de Chimborazo (ESPOCH). Con esta finalidad se diseñó la WebQuest para ser aplicada con estudiantes entre 18 y 22 años en la asignatura de Programación. La investigación fue de tipo cognitivo-constructivista, descriptiva, de campo, transversal, aplicada, de ciencias básicas y bajo el paradigma científico, enmarcada bajo políticas y lineamientos del Plan Nacional del Buen Vivir 2013-2017. Mediante la utilización de herramientas colaborativas Google Drive y Google Sites, el test CHAEA para estilos de aprendizaje, herramientas ofimáticas y software especializado determinando así su incidencia en el aprendizaje significativo de los 54 estudiantes tomados como muestra. Se aplicaron dos técnicas estadísticas: t-Student para comprobar el rendimiento académico, comportamiento y estilos de aprendizaje. Con 5% de error y un punto crítico de 2,055 a dos colas, se obtuvieron valores de: 4,382, 2,434 y 3,701 respectivamente. La técnica Chi-cuadrado se aplicó para comprobar las habilidades del siglo XXI, con un punto crítico de 40,1, se generó el valor calculado de 119,84, demostrando que la metodología WebQuest favorece la generación de aprendizajes significativos dentro y fuera del aula de clase.

Fabrication and optimizing of metal nano silicate as toxic metal absorbent from sea water

Pure Water, is a crucial demand of creature life. Following industrial development, extra amount of toxic metals such as chromium enters the environmental cycle through the sewage, which is considered as a serious threat for organisms. One of the modern methods of filtration and removal of contaminants in water, is applying Nano-technology. According to specific property of silicate materials, in this article we try to survey increased power in composites and various absorption in several morphologies and also synthesis of Nano-metal silicates with different morphologies as absorbent of metal toxic ions. At first, we synthesize nano zink silicate with three morphologies considering context and the purpose of this survey. 1) Nano synthesis of zink silicate hollow cavity by hydrothermal method in mixed solvent system of ethanol/glycol polyethylene. 2) Zink nano wires silicate in a water-based system by controlling the amount of sodium silicate. 3) Synthesis of nano zink silicate membrane. After synthesizing, we measured the cadmium ion absorbance by synthesized nano zink silicates. Controlling PH, is the applied absorption method. Next step, we synthesized nano zink-magnesium silicate composite in two various morphologies of nanowires and membrane by different precent of zink and magnesium, in order to optimize synthesized nano metal silicate. We used zink nitrate and magnesium nitrate and also measured cadmium absorption by synthesized nano metal silicates in the same way of PH control absorption. In the 3rd step, in order to determine the impact of the type of metal in nano metal silicate, we synthesized nano magnesium silicate and compared its absorption with nano zink silicate. Furthermore, we calculated the optimal concentration in one of synthesizes. Optimal concentration is the process which has the maximum absorption. While applying two methods of absorption in the test, finally we compared the effect of absorption method on the absorption level. Below you find further steps of synthesis: 1) Using IR, RAMAN, XRD spectroscopy to check the accuracy of synthesis. 2) Checking the dispersion of nano particles in ethanol solution by light microscope. 3) Measuring and observing particles with scanning electron microscope (SEM). 4) Using atomic absorption device for measuring the cadmium concentration in water-based solutions. The nano metal silicates were synthesized successfully. All of synthesized nano absorbents have the cadmium ion absorbency. The cadmium absorption via nano absorbents depend on various factors such as kind of metal in nano silicate and percent of metal in nano metal silicate composite. Meanwhile the absorption and PH control of medium containing the absorbent and solution would affect the cadmium absorption.

Distal limb osteoarthritis in the horse

The aim of this thesis was to study two objective methods of osteoarthritis (OA) diagnosis in horses and use them on the assessment of new intra-articular treatments. The studied methods were a new inertial-sensor based system of lameness detection and cartilage biomarkers in serum. It was found that distal limb flexion is significantly correlated to the presence of metacarpo-phalangeal OA in hind limbs and that inertial-sensors are sensitive in detecting asymmetry in these cases. A positive and significant correlation was observed between Coll2-1 concentration in serum and the presence of joint disease in males and young horses. Fib3-2 measurement has good potential to be used since it is not influenced by sex or age. Using an experimental model of OA, adipose stem cells pre-activated with interferon-gamma decreased joint inflammation and radiographic lesions. In clinical cases, a single injection of high-concentrated and high-molecular weight hyaluronic-acid decreased joint inflammation and biomarkers’ concentration; OSTEOARTRITE DO MEMBRO DISTAL NO CAVALO Resumo: A finalidade desta tese foi estudar dois métodos de diagnóstico objetivo de osteoartrite (OA) em equinos e aplicá-los na avaliação de novas terapias intra-articulares. Utilizou-se um sistema de sensores de movimento e foi avaliada a concentração de biomarcadores de cartilagem no soro. Concluiu-se que a flexão distal positiva está correlacionada com OA na articulação metacarpofalângica nos membros posteriores e que os sensores são sensíveis na detecção de assimetria nestes casos. Existe uma correlação positiva e significativa entre as concentrações de Coll2-1 e a presença de doença articular, sobretudo em machos e jovens. A dosagem de Fib3-2 tem utilidade por não ser influenciada pelo sexo nem idade. Num modelo experimental da doença, a terapia à base de células estaminais reduziu a inflamação articular e as lesões radiográficas. Em casos clínicos, o tratamento com ácido-hialurónico de alta concentração e peso molecular provoca uma diminuição da inflamação articular e dos biomarcadores no soro.

CHARACTERIZATION OF POLYUBIQUITIN CHAINS BY MASS SPECTROMETRY

The work outlined in this dissertation will allow biochemists and cellular biologists to characterize polyubiquitin chains involved in their cellular environment by following a facile mass spectrometric based workflow. The characterization of polyubiquitin chains has been of interest since their discovery in 1984. The profound effects of ubiquitination on the movement and processing of cellular proteins depend exclusively on the structures of mono and polyubiquitin modifications anchored or unanchored on the protein within the cellular environment. However, structure-function studies have been hindered by the difficulty in identifying complex chain structures due to limited instrument capabilities of the past. Genetic mutations or reiterative immunoprecipitations have been used previously to characterize the polyubiquitin chains, but their tedium makes it difficult to study a broad ubiquitinome. Top-down and middle-out mass spectral based proteomic studies have been reported for polyubiquitin and have had success in characterizing parts of the chain, but no method to date has been successful at differentiating all theoretical ubiquitin chain isomers (ubiquitin chain lengths from dimer to tetramer alone have 1340 possible isomers). The workflow presented here can identify chain length, topology and linkages present using a chromatographic-time-scale compatible, LC-MS/MS based workflow. To accomplish this feat, the strategy had to exploit the most recent advances in top-down mass spectrometry. This included the most advanced electron transfer dissociation (ETD) activation and sensitivity for large masses from the orbitrap Fusion Lumos. The spectral interpretation had to be done manually with the aid of a graphical interface to assign mass shifts because of a lack of software capable to interpret fragmentation across isopeptide linkages. However, the method outlined can be applied to any mass spectral based system granted it results in extensive fragmentation across the polyubiquitin chain; making this method adaptable to future advances in the field.

INVESTIGATION OF MAGNESIUM ION CHARGE STORAGE MECHANISM IN MANGANESE DIOXIDE

Magnesium (Mg) battery is considered as a promising candidate for the next generation battery technology that could potentially replace the current lithium (Li)-ion batteries due to the following factors. Magnesium possesses a higher volumetric capacity than commercialized Li-ion battery anode materials. Additionally, the low cost and high abundance of Mg compared to Li makes Mg batteries even more attractive. Moreover, unlike metallic Li anodes which have a tendency to develop a dendritic structure on the surface upon the cycling of the battery, Mg metal is known to be free from such a hazardous phenomenon. Due to these merits of Mg as an anode, the topic of rechargea¬ble Mg batteries has attracted considerable attention among researchers in the last few decades. However, the aforementioned advantages of Mg batteries have not been fully utilized due to the serious kinetic limitation of Mg2+ diffusion process in many hosting compounds which is believed to be due to a strong electrostatic interaction between divalent Mg2+ ions and hosting matrix. This serious kinetic hindrance is directly related to the lack of cathode materials for Mg battery that provide comparable electrochemical performances to that of Li-based system. Manganese oxide (MnO2) is one of the most well studied electrode materials due to its excellent electrochemical properties, including high Li+ ion capacity and relatively high operating voltage (i.e., ~ 4 V vs. Li/Li+ for LiMn2O4 and ~ 3.2 V vs. Mg/Mg2+). However, unlike the good electrochemical properties of MnO2 realized in Li-based systems, rather poor electrochemical performances have been reported in Mg based systems, particularly with low capacity and poor cycling performances. While the origin of the observed poor performances is believed to be due to the aforementioned strong ionic interaction between the Mg2+ ions and MnO2 lattice resulting in a limited diffusion of Mg2+ ions in MnO2, very little has been explored regarding the charge storage mechanism of MnO2 with divalent Mg2+ ions. This dissertation investigates the charge storage mechanism of MnO2, focusing on the insertion behaviors of divalent Mg2+ ions and exploring the origins of the limited Mg2+ insertion behavior in MnO2. It is found that the limited Mg2+ capacity in MnO2 can be significantly improved by introducing water molecules in the Mg electrolyte system, where the water molecules effectively mitigated the kinetic hindrance of Mg2+ insertion process. The combination of nanostructured MnO2 electrode and water effect provides a synergic effect demonstrating further enhanced Mg2+ insertion capability. Furthermore, it is demonstrated in this study that pre-cycling MnO2 electrodes in water-containing electrolyte activates MnO2 electrode, after which improved Mg2+ capacity is maintained in dry Mg electrolyte. Based on a series of XPS analysis, a conversion mechanism is proposed where magnesiated MnO2 undergoes a conversion reaction to Mg(OH)2 and MnOx and Mn(OH)y species in the presence of water molecules. This conversion process is believed to be the driving force that generates the improved Mg2+ capacity in MnO2 along with the water molecule’s charge screening effect. Finally, it is discussed that upon a consecutive cycling of MnO2 in the water-containing Mg electrolyte, structural water is generated within the MnO2 lattice, which is thought to be the origin of the observed activation phenomenon. The results provided in this dissertation highlight that the divalency of Mg2+ ions result in very different electrochemical behaviors than those of the well-studied monovalent Li+ ions towards MnO2.