Passive solar options for reducing heating demand and maintain indoor climate in a multifamily house in Sweden

This research was carried out by studying possible renovation of a two-storey detached multifamily building by using passive solar design options in a cold climate in Borlänge, Sweden where the heating Degree Days are 4451 (base 20°C). Borlänge`s housing company, Tunabyggen, plans to renovate the project house located inthe multicultural district, Jakobsgårdarna. The goal of the thesis was to suggest a redesign of the current building, decrease the heating energy use, by applying passive solar design and control strategies, in a most reasonable way. In addition ensure a better thermal comfort for the tenants in the dwellings. Literatures have been studied, from which can be inferred that passive design should be abasic design consideration for all housing constructions, because it has advantages to ensure thermal comfort, and reduce the energy use. In addition further savings can be achieved applying different types of control strategies, from which the house will be more personalized, and better adapted to the user’s needs.The proposed method is based on simulations by using TRNSYS software. First a proper building model was set up, which represents the current state of the project building. Then the thermal insulation and the windows were upgraded, based on today's building regulations. The developments of the passive solar options were accomplished in two steps. First of all the relevant basic passive design elements were considered, then those advantages were compared to the advantages of applying new conventional thermostat, and shading control strategies.The results show that there is significant potential with the different types of passive solar design; their usage depends primarily on the location of the site as well as the orientation of the project building. Applying the control strategies, such as thermostat, and shading control, along the thermal insulation upgrade, may lead to significant energy savings (around 40 %), by comparison to the reference building without any upgrade.

Universal Design in Higher Education

While colleges and universities increasingly draw upon the concept of Universal Design to create an ideal learning environment, it can be challenging to apply the concept practically in the classroom. This project explores innovative ways to incorporate Universal Design into campus architecture, classroom technology and curriculum development. Further, this brief describes different approaches used by universities to garner faculty interest and offer effective training in Universal Design.

Design of boundary-scan testing in CMOS image sensors for industrial applications: internship repor

Tests on printed circuit boards and integrated circuits are widely used in industry,resulting in reduced design time and cost of a project. The functional and connectivity tests in this type of circuits soon began to be a concern for the manufacturers, leading to research for solutions that would allow a reliable, quick, cheap and universal solution. Initially, using test schemes were based on a set of needles that was connected to inputs and outputs of the integrated circuit board (bed-of-nails), to which signals were applied, in order to verify whether the circuit was according to the specifications and could be assembled in the production line. With the development of projects, circuit miniaturization, improvement of the production processes, improvement of the materials used, as well as the increase in the number of circuits, it was necessary to search for another solution. Thus Boundary-Scan Testing was developed which operates on the border of integrated circuits and allows testing the connectivity of the input and the output ports of a circuit. The Boundary-Scan Testing method was converted into a standard, in 1990, by the IEEE organization, being known as the IEEE 1149.1 Standard. Since then a large number of manufacturers have adopted this standard in their products. This master thesis has, as main objective: the design of Boundary-Scan Testing in an image sensor in CMOS technology, analyzing the standard requirements, the process used in the prototype production, developing the design and layout of Boundary-Scan and analyzing obtained results after production. Chapter 1 presents briefly the evolution of testing procedures used in industry, developments and applications of image sensors and the motivation for the use of architecture Boundary-Scan Testing. Chapter 2 explores the fundamentals of Boundary-Scan Testing and image sensors, starting with the Boundary-Scan architecture defined in the Standard, where functional blocks are analyzed. This understanding is necessary to implement the design on an image sensor. It also explains the architecture of image sensors currently used, focusing on sensors with a large number of inputs and outputs.Chapter 3 describes the design of the Boundary-Scan implemented and starts to analyse the design and functions of the prototype, the used software, the designs and simulations of the functional blocks of the Boundary-Scan implemented. Chapter 4 presents the layout process used based on the design developed on chapter 3, describing the software used for this purpose, the planning of the layout location (floorplan) and its dimensions, the layout of individual blocks, checks in terms of layout rules, the comparison with the final design and finally the simulation. Chapter 5 describes how the functional tests were performed to verify the design compliancy with the specifications of Standard IEEE 1149.1. These tests were focused on the application of signals to input and output ports of the produced prototype. Chapter 6 presents the conclusions that were taken throughout the execution of the work.

Otimização de forma aplicando B-splines sob critério integral de tensões

This work proposes a computational methodology to solve problems of optimization in structural design. The application develops, implements and integrates methods for structural analysis, geometric modeling, design sensitivity analysis and optimization. So, the optimum design problem is particularized for plane stress case, with the objective to minimize the structural mass subject to a stress criterion. Notice that, these constraints must be evaluated at a series of discrete points, whose distribution should be dense enough in order to minimize the chance of any significant constraint violation between specified points. Therefore, the local stress constraints are transformed into a global stress measure reducing the computational cost in deriving the optimal shape design. The problem is approximated by Finite Element Method using Lagrangian triangular elements with six nodes, and use a automatic mesh generation with a mesh quality criterion of geometric element. The geometric modeling, i.e., the contour is defined by parametric curves of type B-splines, these curves hold suitable characteristics to implement the Shape Optimization Method, that uses the key points like design variables to determine the solution of minimum problem. A reliable tool for design sensitivity analysis is a prerequisite for performing interactive structural design, synthesis and optimization. General expressions for design sensitivity analysis are derived with respect to key points of B-splines. The method of design sensitivity analysis used is the adjoin approach and the analytical method. The formulation of the optimization problem applies the Augmented Lagrangian Method, which convert an optimization problem constrained problem in an unconstrained. The solution of the Augmented Lagrangian function is achieved by determining the analysis of sensitivity. Therefore, the optimization problem reduces to the solution of a sequence of problems with lateral limits constraints, which is solved by the Memoryless Quasi-Newton Method It is demonstrated by several examples that this new approach of analytical design sensitivity analysis of integrated shape design optimization with a global stress criterion purpose is computationally efficient

Effects of environrnental conditions on the radon daughters spatial distribution

The influence of environmental conditions on the indoor radon daughters spatial distribution is studied both theoretically and experimentally. Simple theoretical calculations indicate that ventilation and variation in the size distribution of aerosols should play an important role influencing the spatial distribution of indoor radon decay products, but experimental results indicate that these environmental factors have little influence on the spatial distribution of radon daughters near the walls of indoor environments. We have observed that the maximum effective range of the plate-out effect varies only between I and 3 cm in typical dwellings. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

DFT study of alpha-alanine as a function of the medium polarity

The zwitterionic (Z) form, neutral (N) form and transition structure (TS) connecting N to Z, have been studied at the B3LYP/6-31++G** level of calculation by using the SCRF methodology. The intramolecular proton transfer from oxygen to nitrogen atoms of alpha -alanine and vibrational spectrum were analyzed in the different environments employed: acetonitrile, ethanol, carbon tetrachloride and gas phase. The Z species is a stationary point in acetonitrile and ethanol, but not in carbon tetrachloride and gas phase media. The geometry of N, Z and TS was similar in acetonitrile and ethanol. The vibrational spectrum of Z was similar in the two solvents studied. (C) 2001 Elsevier B.V. B.V. All lights reserved.

Novel active and passive anti-vibration mountings

This paper investigates a novel design approach for a vibration isolator for use in space structures. The approach used can particularly be applicable for aerospace structures that support high precision instrumentation such as satellite payloads. The isolator is a space-frame structure that is folded in on itself to act as a mechanical filter over a defined frequency range. The absence of viscoelastic elements in such a mounting makes the design suitable for use in a vacuum and in high temperature or harsh environments with no risk of drift in alignment of the structure. The design uses a genetic algorithm based geometric optimisation routine to maximise passive vibration isolation, and this is hybridised with a geometric feasibility search. To complement the passive isolation system, an active system is incorporated in the design to add damping. Experimental work to validate the feasibility of the approach is also presented, with the active/passive structure achieving transmissibility of about 19 dB over a range of 1-250 Hz. It is shown here that the use of these novel anti-vibration mountings has no or little consequent weight and cost penalties whilst maintaining their effectiveness with the vibration levels. The approach should pave the way for the design of anti-vibration mountings that can be used between most pieces of equipment and their supporting structure. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.

Configurações de semeadura e produção e qualidade da fibra do algodoeiro

We evaluated, in two locations, production and fiber quality of cultivar IAC 23 cotton plants in ultra-narrow row, narrow row and conventional row spacing, varying number of plants by linear meter. Two experiments had been lead, one in Piracicaba - SP and another one in Campinas - SP, both in the crop year 2001/02. The experimental design was randomized blocks, in a factorial scheme, with 4 replications, being three spacing rows: 0.38m (ultra-narrow), 0.76m (narrow), and 0.95 m (conventional); and four densities (5, 8, 11, and 14 plants by linear meter). In Piracicaba, the production of cotton was 12% and 8,4 % superior in the ultra-narrow row and narrow row, respectively, when compared to the conventional row. In the ultra-narrow row in the smaller density of plants in the line, the production of cotton was 29.2% and 22.3% superior, respectively, to the productions of the narrow row and conventional row in the same number of plants in the line. The smaller spacing and higher plant density on the line, the smaller the number of bolls per plant at both locations. The agronomic characters of laboratory and the technological characteristics of the fiber were not modified by the populations of plants in the two studied environments.

O Desenvolvimento local sustentável no semi-árido nordestino: um estudo de caso na comunidade de mirandas, Caraúbas/RN

Brazil s semi-arid region is an immense territory characterized by a mosaic of natural environments and human settlements. Inside this multifaceted framework, there are problems that are specific to the region (the water resources situation, for example) while others are more universal (such as the inequality between men and women). The circumstances that give rise to these problems are complex and require a holistic view so that our understanding can go beyond the simple concept that this is a problem region . The semi-arid must be perceived as a viable area in need of a new analysis, taking into account its successes, limitations, challenges and the strategic public policy framework that guarantees its sustainable development. The dissertation analyzes, from a sustainable local development perspective, the experience of the Northeastern Brazil Groundwater Project (PROASNE), carried out from 2001 to 2003, in partnership with the Waters and Sewers Company of Rio Grande do Norte (CAERN) in the rural community of Mirandas, municipality of Caraúbas/RN, situated in the middle of the northeastern Brazil semi-arid region

Evidence of higher photosynthetic plasticity in the early successional Guazuma ulmifolia Lam. compared to the late successional Hymenaea courbaril L. grown in contrasting light environments

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and thermal characterization of dioctadecyldimethylammonium bromide dispersions by spin labels

Dioctadecyldimethylammonium bromide (DODAB) dispersions obtained by simply mixing the amphiphile in water, and by bath-sonication, were investigated by electron spin resonance (ESR) of stearic acids and their methyl ester derivatives, labeled at the 5th and 16th carbons of the acyl chain. The ESR spectra indicate that the non-sonicated dispersions are formed mainly by one population of DODAB vesicles, either in the gel (T < T-m) or in the liquid-crystalline (T > T-m) state. Around T-m there is a co-existence of the two phases, with a thermal hysteresis of about 3.2 degreesC. In sonicated DODAB dispersions, spin labels indicate two different environments even for temperatures far below T-m: one similar to that obtained with non-sonicated samples, a gel phase, and another one in the liquid-crystalline state. The fluid phase domain present below T-m could correspond to either the periphery of bilayer fragments, reported to be present in sonicated DODAB dispersions, or to high curvature vesicles. (C) 2001 Elsevier B.V. Ireland Ltd. All rights reserved.

Indoor radon measurements and methodologies in Latin American countries

According to the current international guidelines concerning environmental problems, it is necessary to evaluate and to know the indoor radon levels, specially since most of the natural radiation dose to man comes from radon gas and its progeny. Several countries have established National Institutions and National Programs for the study of radon and its connection with lung cancer risk and public health. The aim of this work is to present the indoor radon measurements and the detection methods used for different regions of Latin America (LA) in countries such as Argentina, Brazil, Ecuador, Mexico, Peru and Venezuela. This study shows that the passive radon devices based on alpha particle nuclear track methodology (NTM) is one of the more generalized methods in LA for long term indoor radon measurements, CR-39, LR-115 and Makrofol being the more commonly used detector materials. The participating institutions and the radon level measurements in the different countries are presented in this contribution. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Istmo Centroamericano: estadísticas del subsector eléctrico (datos actualizados a 2001)

Incluye Bibliografía

Modelo estatístico para aplicações no planejamento de sistemas móveis celulares em ambiente indoor multifontes

O projeto de sistemas de comunicações móveis requer o conhecimento do ambiente em que será implementado. Para tanto, busca-se a exatidão na predição de propagação do sinal através do uso de modelos de predição. O presente trabalho propõe um modelo empírico para a estimativa da intensidade de sinal recebida em ambientes indoor, e que apresentam mais de uma fonte transmissora, utilizando Sistema de Antenas Distribuídas (DAS). O método apresenta uma generalização para o caso de múltiplas fontes, também chamado multifontes, e como caso particular com apenas uma fonte. A modelagem é feita através do uso de radiais partindo de cada transmissor, com o intuito de considerar a variabilidade do sinal em ambientes indoor. Estas várias perturbações no sinal, que causam desvanecimento rápido são caracterizadas através das distribuições estatísticas de desvanecimento. As mais utilizadas como a de Rayleigh, Rice e Nakagami são apresentadas para caracterização do canal, além dessas são calculadas as distribuições recentemente desenvolvidas, de Kappa-mi e Eta-mi. Para a validação do modelo realizaram-se campanhas de medições em um shopping center, que possui um DAS, com o teste em dois ambientes distintos, um supermercado e uma praça de alimentação. As simulações são realizadas no software MATLAB® e o desempenho dos resultados avaliados através do cálculo dos erros absoluto, desvio padrão e erro rms.

Representações sociais de adolescentes: ato infracional e projeto de vida

Este estudo tem por objeto as representações sociais das adolescentes autoras de atos infracionais sobre a socioeducação e as implicações nos seus projetos de vida. A problemática se orientou com o foco nas representações sociais anunciadas pelas adolescentes autoras de atos infracionais sobre as medidas socioeducativas de internação e semiliberdade e as implicações nos seus projetos de vida. O lócus da pesquisa foi o Centro Socioeducativo Feminino - CESEF que pertence a Fundação de Atendimento Socioeducativo do Estado do Pará. Os objetivos do estudo foram: a) identificar o perfil das adolescentes custodiadas no CESEF, na faixa etária de 13 a 18 anos incompletos em cumprimento de medida socioeducativa de internação e semiliberdade; b) caracterizar as imagens e sentidos que atribuem às medidas socioeducativas que cumprem; c) destacar as objetivações e as ancoragens que organizam as representações sociais que as adolescentes possuem sobre as medidas que cumprem; d) compreender o projeto de vida das adolescentes; e) correlacionar as representações sociais das adolescentes sobre as medidas com os seus projetos de vida. A metodologia seguiu a abordagem qualitativa e o referencial teórico centrou-se na Teoria das Representações Sociais de Moscovici (1978) e Jodelet (2001). Os aportes teóricos de Nascimento, 2002; 2006 e 2011; e Melucci, 1996 nos auxiliaram nas incursões e articulações sobre a adolescência. Os referenciais de Volpi, 2001; Louro, 1998; Saffioti, 1987; Assis e Constantino, 2001; Zaluar, 1994; Voegeli, 2003 no entendimento de gênero e no envolvimento de mulheres em práticas delitivas. Rizzini e Pilotti, 2011; Marcílio, 1996; 2002; Oliveira e Assis, 1999; sobre o histórico das políticas de atendimento à adolescência autora de ato Infracional no Brasil e no Pará. Os sujeitos de estudo foram seis adolescentes do Centro Socioeducativo Feminino em cumprimento das medidas socioeducativas de internação e semiliberdade. O levantamento de dados constou de: entrevistas com roteiro semi estruturado; observação in loco e diário de campo. Os instrumentos para a análise dos dados utilizamos a análise de conteúdo de acordo com a abordagem proposta por Franco (2003). Os resultados revelam que as representações sociais das adolescentes infratoras sobre a socioeducação e as implicações nos seus projetos de vida se constituem em torno da medida disciplinar. Que por sua vez se consolidou ao longo do processo histórico das medidas socioeducativas. O sentido que as adolescentes produzem sobre estas medidas ancoram na dúvida quanto a sua eficiência. A imagem consensual que elaboram sobre as suas vidas após o cumprimento dessas medias assinalam que pode haver retorno a instituição socioeducativa por infringirem as leis. Assim estas representações sociais comprometem os projetos de vida das adolescentes autoras de atos infracionais.