Actitudes de un grupo de directivos de empresa hacia la integración laboral de personas en proceso de reintegración en Colombia

Colombia atraviesa un proceso de desmovilización y una de las metas es la reintegración laboral, entendida como el proceso a través del cual las personas que han hecho parte de un grupo armado ilegal obtienen un empleo y se insertan definitivamente a la sociedad. El presente estudio tiene como objetivo fundamental comprender las actitudes de un grupo de tres directivos hacia la vinculación laboral de las personas en proceso de reintegración laboral (PPR), mediante un diseño cualitativo. Para ello, se llevó a cabo una serie de entrevistas semiestructuradas a una muestra de tres directivos del sector público y privado. La información obtenida se analizó mediante un proceso de codificación axial. Los resultados obtenidos evidencian que las actitudes de los tres empresarios frente a la contratación de personas en proceso de reintegración laboral, pueden ser positivas o negativas. Así mismo, una de las actitudes predominantes, son la evaluación de creencias y prejuicios de los empresarios frente al proceso de integración laboral, estos son: la incertidumbre frente al desempeño laboral del PPR, la falta de dedicación por parte del PPR, los posibles conflictos laborales y la dificultad de relacionamiento del PPR. En conclusión, el modelo del comportamiento organizacional juega un papel muy importante, dado que abarca los elementos que influyen y determinan la construcción de las actitudes. Estas guían la evaluación de conductas que pueden ser a favor o en contra, de diversos ámbitos del proceso de contratación de personas desmovilizadas.

La política del Presidente Wilson en América Central: la lucha contra la inestabilidad económica

Introducción Los planificadores de  la política exterior de Estados Unidos siempre le han presentado gran interés a la estratégica región centroamericana. Los europeos habían invertido intensamente en la región y Estados Unidos comprendía que, a menos que asumiera la responsabilidad por la estabilidad económica y política de los estados centroamericanos, los gobiernos de Europa ignorarían la Doctrina Monroe cuando se tratase e proteger los intereses del exterior, Estados Unidos deberá mantener el orden, per la abierta intervención militar era costosa y era generadora de mala voluntad en todo el hemisferio. En  consecuencia, el gobierno de Wilson buscó otros medios para promover la estabilidad y la hegemonía estadunidense. La Primera Guerra Mundial produjo una coyuntura de especiales oportunidades, así como de particulares riesgos.

CONTINUIDADES E RUPTURAS: ORGNANIZAÇÃO LABORAL E CAMPESINATO NO BRASIL

Como objetivo central para este trabalho, tomaremos como perspectiva a análise da organização laboral e produtiva dos camponeses, considerando como essencial o acesso à terra bem como aos demais meios de produção por parte dos agricultores. Isto, porém, nos leva a buscar duplamente a compreensão dos pontos de ruptura e elementos de continuidade das formas sociais tradicionais ou modernas no campo brasileiro. Para tanto, entendemos como metodologia de análise as mudanças nas relações sociais e do meio de produção no espaço rural como efeito geral da modernização da agricultura. E, dentro deste contexto, propomos uma busca pela compreensão do espaço rural no Brasil, situando transformações sócio-espaciais, considerando as mudanças na estrutura produtiva, que consistem na mudança da racionalidade camponesa e que se traduzem na atual diversificação da organização laboral e produtiva.

La política migratoria de los estados receptores de la migración centroamericana el caso de México y Estados Unidos

 El presente escrito aborda la situación de la migración humana por razones de trabajo hacia países cercanos o fronterizos, los cuales ofrecen un panorama económico y de oportunidades mejor que el del país de origen. Esto ha dado lugar a una serie de fenómenos sociales que comprenden aspectos no solo laborales sino incluyen también comerciales, legales, políticos y de derechos humanos en medio de los cuales son los trabajadores mismos los más afectados.  The present text addresses to show the situation of human migration due to labour reasons towards near or border countries, theses countries offer an economic and opportunity panorama better than the origin countries. This has allowed a series of social phenomena that include labour, commercial, legal, political and human rights aspects, in the middle of which the workers are the most affected.

A ‘cost-per-wear’ model based on contact lens replacement frequency

Purpose: The aim was to construct and advise on the use of a cost-per-wear model based on contact lens replacement frequency, to form an equitable basis for cost comparison. ---------- Methods: The annual cost of professional fees, contact lenses and solutions when wearing daily, two-weekly and monthly replacement contact lenses is determined in the context of the Australian market for spherical, toric and multifocal prescription types. This annual cost is divided by the number of times lenses are worn per year, resulting in a ‘cost-per-wear’. The model is presented graphically as the cost-per-wear versus the number of times lenses are worn each week for daily replacement and reusable (two-weekly and monthly replacement) lenses.---------- Results: The cost-per-wear for two-weekly and monthly replacement spherical lenses is almost identical but decreases with increasing frequency of wear. The cost-per-wear of daily replacement spherical lenses is lower than for reusable spherical lenses, when worn from one to four days per week but higher when worn six or seven days per week. The point at which the cost-per-wear is virtually the same for all three spherical lens replacement frequencies (approximately AUD$3.00) is five days of lens wear per week. A similar but upwardly displaced (higher cost) pattern is observed for toric lenses, with the cross-over point occurring between three and four days of wear per week (AUD$4.80). Multifocal lenses have the highest price, with cross-over points for daily versus two-weekly replacement lenses at between four and five days of wear per week (AUD$5.00) and for daily versus monthly replacement lenses at three days per week (AUD$5.50).---------- Conclusions: This cost-per-wear model can be used to assist practitioners and patients in making an informed decision in relation to the cost of contact lens wear as one of many considerations that must be taken into account when deciding on the most suitable lens replacement modality.

Fair flow control of ABR service by per-VC virtual queuing

In this paper, a rate-based flow control scheme based upon per-VC virtual queuing is proposed for the Available Bit Rate (ABR) service in ATM. In this scheme, each VC in a shared buffer is assigned a virtual queue, which is a counter. To achieve a specific kind of fairness, an appropriate scheduler is applied to the virtual queues. Each VC's bottleneck rate (fair share) is derived from its virtual cell departure rate. This approach of deriving a VC's fair share is simple and accurate. By controlling each VC with respect to its virtual queue and queue build-up in the shared buffer, network congestion is avoided. The principle of the control scheme is first illustrated by max–min flow control, which is realised by scheduling the virtual queues in round-robin. Further application of the control scheme is demonstrated with the achievement of weighted fairness through weighted round robin scheduling. Simulation results show that with a simple computation, the proposed scheme achieves the desired fairness exactly and controls network congestion effectively.

Compensation for lost services of an employee : pure economic loss and per quod action

Under the common law an employer may take action against a defendant for the loss of an employee’s services due to the act of the defendant (per quod servitium amisit - by reason of which the services were lost). The High Court has recently affirmed the existence of this ancient tort in Barclay v Penberthy [2012] HCA 40.

PV string per-module maximum power point enabling converters

Many grid connected PV installations consist of a single series string of PV modules and a single DC-AC inverter. This efficiency of this topology can be enhanced with additional low power, low cost per panel converter modules. Most current flows directly in the series string which ensures high efficiency. However parallel Cúk or buck-boost DC-DC converters connected across each adjacent pair of modules now support any desired current difference between series connected PV modules. Each converter “shuffles” the desired difference in PV module currents between two modules and so on up the string. Spice simulations show that even with poor efficiency, these modules can make a significant improvement to the overall power which can be recovered from partially shaded PV strings.

Second-order elastic finite element analysis of steel structures using a single element per member

Finite element frame analysis programs targeted for design office application necessitate algorithms which can deliver reliable numerical convergence in a practical timeframe with comparable degrees of accuracy, and a highly desirable attribute is the use of a single element per member to reduce computational storage, as well as data preparation and the interpretation of the results. To this end, a higher-order finite element method including geometric non-linearity is addressed in the paper for the analysis of elastic frames for which a single element is used to model each member. The geometric non-linearity in the structure is handled using an updated Lagrangian formulation, which takes the effects of the large translations and rotations that occur at the joints into consideration by accumulating their nodal coordinates. Rigid body movements are eliminated from the local member load-displacement relationship for which the total secant stiffness is formulated for evaluating the large member deformations of an element. The influences of the axial force on the member stiffness and the changes in the member chord length are taken into account using a modified bowing function which is formulated in the total secant stiffness relationship, for which the coupling of the axial strain and flexural bowing is included. The accuracy and efficiency of the technique is verified by comparisons with a number of plane and spatial structures, whose structural response has been reported in independent studies.

Second-order elastic finite element analysis of structures using a single element per member

Finite element frame analysis programs targeted for design office application necessitate algorithms which can deliver reliable numerical convergence in a practical timeframe with comparable degrees of accuracy, and a highly desirable attribute is the use of a single element per member to reduce computational storage, as well as data preparation and the interpretation of the results. To this end, a higher-order finite element method including geometric non-linearity is addressed in the paper for the analysis of elastic frames for which a single element is used to model each member. The geometric non-linearity in the structure is handled using an updated Lagrangian formulation, which takes the effects of the large translations and rotations that occur at the joints into consideration by accumulating their nodal coordinates. Rigid body movements are eliminated from the local member load-displacement relationship for which the total secant stiffness is formulated for evaluating the large member deformations of an element. The influences of the axial force on the member stiffness and the changes in the member chord length are taken into account using a modified bowing function which is formulated in the total secant stiffness relationship, for which the coupling of the axial strain and flexural bowing is included.

Planes, trains, automobiles and the action per quod servitium amisit

The action per quod servitium amisit compensates an employer for the loss of an employee’s services, where such loss is caused due to the commission of a tort by a third party which injures the employee. Although not commonly pleaded, such actions often arise when employees are harmed due to transportation accidents. For example, where allowed, physical injury caused by the negligent driving of automobiles, and the psychiatric injury suffered by an engine driver upon averting a collision with a motorcyclist crossing before an oncoming train...

Wastewater analysis of Census day samples to investigate per capita input of organophosphorus flame retardants and plasticizers into wastewater

The use of organophosphate esters (PFRs) as flame retardants and plasticizers has increased due to the ban of some brominated flame retardants. There is however some concern regarding the toxicity, particularly carcinogenicity and neurotoxicity, of some of the PFRs. In this study we applied wastewater analysis to assess use of PFRs by the Australian population. Influent samples were collected from eleven wastewater treatment plants (STPs) in Australia on Census day and analysed for PFRs using gas chromatography coupled with mass spectrometry (GC-MS). Per capita mass loads of PFRs were calculated using the accurate Census head counts. The results indicate that tris(2-butoxyethyl) phosphate (TBOEP) has the highest per capita input into wastewater followed by tris(2-chloroisopropyl) phosphate (TCIPP), tris(isobutyl) phosphate (TIBP), tris(2-chloroethyl) phosphate (TCEP) and tris(1,3-dichloroisopropyl) phosphate (TDCIPP). Similar PFR profiles were observed across the Australian STPs and a comparison with European and U.S. STPs indicated similar PFR concentrations. We estimate that approximately 2.1 mg person−1 day−1 of PFRs are input into Australian wastewater which equates to 16 tonnes per annum.

Basic Needs and Much More With One Kilowatt Per Capita

Conventional thinkin g holds that increased energy consumption is a prerequisite for economic and social development. This belief, together With the prospect of dwindling global petroleum supplies and the high costs of expanding energy supply generally, lead many to believe that it is not feasible to improve living standards substantially in the developing countries. But by shifting to high-quality energy carriers and by exploiting cost-effective opportunities for more efficient energy use, it would be possible to satisfy basic human needs and to provide considerable further improvements in living standards without significantly increasing per-capita energy use above the present level.