Time-periodic perturbation of a Lienard equation with an unbounded homoclinic loop

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Global dynamics of the Rikitake system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Optimal Conditions for Biomass and Recombinant Glycerol Kinase Production Using the Yeast Pichia pastoris

The extracellular glycerol kinase gene from Saccharomyces cerevisiae (GUT]) was cloned into the expression vector pPICZ alpha. A and integrated into the genome of the methylotrophic yeast Pichia pastoris X-33. The presence of the GUT1 insert was confirmed by PCR analysis. Four clones were selected and the functionality of the recombinant enzyme was assayed. Among the tested clones, one exhibited glycerol kinase activity of 0.32 U/mL, with specific activity of 0.025 U/mg of protein. A medium optimized for maximum biomass production by recombinant Pichia pastoris in shaker cultures was initially explored, using 2.31 % (by volume) glycerol as the carbon source. Optimization was carried out by response surface methodology (RSM). In preliminary experiments, following a Plackett-Burman design, glycerol volume fraction (phi(Gly)) and growth time (t) were selected as the most important factors in biomass production. Therefore, subsequent experiments, carried out to optimize biomass production, followed a central composite rotatable design as a function of phi(Gly) and time. Glycerol volume fraction proved to have a significant positive linear effect on biomass production. Also, time was a significant factor (at linear positive and quadratic levels) in biomass production. Experimental data were well fitted by a convex surface representing a second order polynomial model, in which biomass is a function of both factors (R(2)=0.946). Yield and specific activity of glycerol kinase were mainly affected by the additions of glycerol and methanol to the medium. The optimized medium composition for enzyme production was: 1 % yeast extract, 1 % peptone, 100 mM potassium phosphate buffer, pH=6.0, 1.34 % yeast nitrogen base (YNB), 4.10(-5) % biotin, 1 %, methanol and 1 %, glycerol, reaching 0.89 U/mL of glycerol kinase activity and 14.55 g/L of total protein in the medium after 48 h of growth.

Determinacão do período orbital de sistemas binários clipsantes

In this work is presented a new method for the determination of the orbital period (Porb) of eclipsing binary systems based on the wavelet technique. This method is applied on 18 eclipsing binary systems detected by the CoRoT (Convection Rotation and planetary transits) satellite. The periods obtained by wavelet were compared with those obtained by the conventional methods: box Fitting (EEBLS) for detached and semi-detached eclipsing binaries; and polynomial methods (ANOVA) for contact binary systems. Comparing the phase diagrams obtained by the different techniques the wavelet method determine better Porb compared with EEBLS. In the case of contact binary systems the wavelet method shows most of the times better results than the ANOVA method but when the number of data per orbital cicle is small ANOVA gives more accurate results. Thus, the wavelet technique seems to be a great tool for the analysis of data with the quality and precision given by CoRoT and the incoming photometric missions.

Comparative study between RBF and radial-PPS neural networks

The study of function approximation is motivated by the human limitation and inability to register and manipulate with exact precision the behavior variations of the physical nature of a phenomenon. These variations are referred to as signals or signal functions. Many real world problem can be formulated as function approximation problems and from the viewpoint of artificial neural networks these can be seen as the problem of searching for a mapping that establishes a relationship from an input space to an output space through a process of network learning. Several paradigms of artificial neural networks (ANN) exist. Here we will be investigated a comparative of the ANN study of RBF with radial Polynomial Power of Sigmoids (PPS) in function approximation problems. Radial PPS are functions generated by linear combination of powers of sigmoids functions. The main objective of this paper is to show the advantages of the use of the radial PPS functions in relationship traditional RBF, through adaptive training and ridge regression techniques.

Cubic approximation for the transverse displacement in BEM for elastic plates analysis

This work presents an application for the plate analysis formulation by BEM where 3 boundary equations are used, written for the transverse displacement w and the normal and tangential derivatives partial derivativew/partial derivativen and partial derivativew/partial derivatives. In this extension, the transverse displacement w is approximated by a cubic polynomial and, as a consequence, partial derivativew/partial derivatives has a quadratic approximation. This alternative BEM formulation improves the analysis of thin plates, when compared to the formulation using the linear approximation for the displacements, mainly in the obtaining of the bending moments at the boundary of the plate. The implementation of this proposal to the computational codes is simple. (C) 2004 Published by Elsevier Ltd.

Fermion localization on a split brane

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Diferentes Níveis de Grão de Milheto (Pennisetum glaucum (L.) R. Brown) na Alimentação de Suínos

Foi desenvolvido um experimento com a finalidade de determinar a viabilidade da inclusão do milheto (Pennisetum glaucum (L.) R. Brown) em rações de suínos em fases de crescimento e terminação, observando seu efeito sobre o consumo diário de ração, ganho diário de peso e conversão alimentar. Foi observado também o efeito da adição de milheto sobre as características de carcaça, sendo utilizados 60 leitões machos, híbridos de linhagem comercial, com peso médio inicial de 22,7 kg. Os tratamentos foram 0, 15, 30, 45 e 60% de inclusão de milheto nas rações de suínos. O delineamento utilizado foi o inteiramente casualizado, com cinco tratamentos e seis repetições, sendo utilizados dois animais por unidade experimental. Utilizou-se, ainda, os desdobramentos dos graus de liberdade de tratamentos, para a realização da regressão polinomial. Não houve efeito dos níveis de inclusão de milheto sobre o desempenho, nas fases de crescimento e terminação, nem sobre as características de carcaça. Concluiu-se que a adição de milheto em rações de suínos é viável. Considerando-se os preços dos ingredientes durante este experimento, a adição de 45% de milheto mostrou-se mais eficiente economicamente.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling

The conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part II. Performance evaluation

The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.

Stabilizing a class of time delay systems using the Hermite-Biehler theorem

In this paper we use the Hermite-Biehler theorem to establish results for the design of fixed order controllers for a class of time delay systems. We extend results of the polynomial case to quasipolynomials using the property of interlacing in high frequencies of the class of time delay systems considered. (C) 2003 Elsevier B.V. All rights reserved.

Low voltage analog synthesizer of orthogonal signals: A current-mode approach

An analog synthesizer of orthogonal signals for digital CMOS technology and 3V supply voltage is presented. The adaptive architecture accomplishes the synthesis of mutually orthogonal signal, such as trigonometric and polynomial basis. Experimental results using 0.35 mu m AMS CMOS process are presented for generation of the cosine and Legendre basis.

Low voltage analog synthesizer of orthogonal signals using current mode techniques

An analog synthesizer of orthogonal signals for digital CMOS technology and 3V supply voltage is presented. The adaptive architecture accomplishes the synthesis of mutually orthogonal signal, such as trigonometric and polynomial basis. Simulation results using 0.35 mu m AMS CMOS process are presented for generation of the cosine and Legendre basis.

Influence of organic-mineral fertilization of an oxisol on soil chemical properties and Bracharia brizantha production

A utilização de fertilizante organomineral da indústria produtora dos aminoácidos lisina e treonina pode melhorar a fertilidade de solos tropicais. O presente trabalho teve como objetivo avaliar a influência de diferentes dosagens do fertilizante organomineral denominado Ajifer L-14 nos atributos químicos e no aumento de produção de forragem de um Latossolo Vermelho do noroeste paulista. O delineamento utilizado foi em blocos casualizados, com sete tratamentos e quatro repetições. Os tratamentos foram: T1- testemunha (sem aplicação de Ajifer L-14); T2- testemunha com vegetação natural; T3- adubação mineral de acordo com a necessidade da cultura e a análise do solo (usando 1,35 kg de ureia, 2,20 kg de superfosfato simples e 0,51 kg de KCl por parcela, o que corresponde a 60 kg de N, 40 kg de P2O5 e 30 kg ha-1 de K2O, respectivamente); T4- adubação com Ajifer L-14 de acordo com a recomendação da análise química do solo (40 L parcela-1, o que corresponde a 60 kg ha-1 N); T5- adubação com Ajifer L-14 em dosagem 50 % acima da recomendação (60 L parcela-1, o que corresponde a 90 kg ha-1 N; T6- adubação com Ajifer L-14 em dosagem 50 % abaixo da recomendação (20 L parcela-1, o que corresponde a 30 kg ha-1 N); T7- adubação com Ajifer L-14 em dosagem 25 % acima da recomendação (50 L parcela-1, o que corresponde a 75 kg ha-1 N); e T8- adubação com Ajifer L-14 em dosagem 25 % abaixo da recomendação (30 L parcela-1, o que corresponde a 45 kg ha-1 N). Nas profundidades de 0,0-0,1 e 0,1-0,2 m, avaliaram-se os seguintes atributos químicos do solo:, teor de matéria orgânica (MO), pH, K+, Ca2+, Mg2+, capacidade de troca catiônica (CTC), acidez potencial e saturação por bases. A aplicação do fertilizante organomineral não influenciou os atributos químicos do solo. Na análise de regressão, houve relação polinomial entre as doses de aplicação do fertilizante organomineral e a produção de massa seca e proteína bruta de Bracharia brizantha.

Reguladores de crescimento e seus efeitos sobre a qualidade fisiológica de sementes e crescimento de plântulas de crotalária

Information regarding the use of growth regulators in sunn hemp is still scarce, especially on the physiologic quality of seeds and growth seedlings. In this aspect, product knowledge and application rate stands out as relevant factors in production of quality seeds. This work aimed to evaluated the effect of the foliar application of growth regulators (mepiquat chloride, etil-trinexapac and paclobutrazol) in different rates (0; 75; 150; 225 and 300 g ha(-1)), on the physiological quality of seeds and growth seedlings of Crotalaria juncea cultivated in no-tillage system. The treatments were disposed in randomized complete block design in factorial scheme 3 x 5 (regulators x rates of application), with four replications. The results were submitted to the variance analysis, with the growth regulators compared by Tukey test and the rates for polynomial regression. Not if recommended the application of mepiquat chloride in sunn hemp culture by reducing the potential of seeds germination and dry biomass of seedlings. The etil-trinexapac must be applied in rate of 300 g ha(-1), based on the reduction of moisture content and the electrical conductivity of seeds, the greater total length of seedlings and dry biomass of seedlings. The paclobutrazol must be applied in rate of 75 g ha(-1), considering the potential and speed of seeds germination.