Droplet etching of deep nanoholes for filling with self-aligned complex quantum structures

Strain-free epitaxial quantum dots (QDs) are fabricated by a combination of Al local droplet etching (LDE) of nanoholes in AlGaAs surfaces and subsequent hole filling with GaAs. The whole process is performed in a conventional molecular beam epitaxy (MBE) chamber. Autocorrelation measurements establish single-photon emission from LDE QDs with a very small correlation function g (2)(0)≃ 0.01 of the exciton emission. Here, we focus on the influence of the initial hole depth on the QD optical properties with the goal to create deep holes suited for filling with more complex nanostructures like quantum dot molecules (QDM). The depth of droplet etched nanoholes is controlled by the droplet material coverage and the process temperature, where a higher coverage or temperature yields deeper holes. The requirements of high quantum dot uniformity and narrow luminescence linewidth, which are often found in applications, set limits to the process temperature. At high temperatures, the hole depths become inhomogeneous and the linewidth rapidly increases beyond 640 °C. With the present process technique, we identify an upper limit of 40-nm hole depth if the linewidth has to remain below 100 μeV. Furthermore, we study the exciton fine-structure splitting which is increased from 4.6 μeV in 15-nm-deep to 7.9 μeV in 35-nm-deep holes. As an example for the functionalization of deep nanoholes, self-aligned vertically stacked GaAs QD pairs are fabricated by filling of holes with 35 nm depth. Exciton peaks from stacked dots show linewidths below 100 μeV which is close to that from single QDs.

Explicación histórica, socialismo y democracia : La trayectoria de Juan Carlos Portantiero

Uno de los objetivos de este artículo es reconstruir la trayectoria intelectual de Juan Carlos Portantiero en torno a un conjunto limitado de sus intereses: el socialismo y la democracia, en su relación, no por separado, a la vez que ello se vincula con la articulación de una estrategia de explicación histórica y sociológica. La otra veta del artículo analiza las relaciones entre culturas políticas y ciencia social, en particular la cultura de izquierdas y el desarrollo de las ciencias sociales en América Latina. Ello se ha realizado sobre la base de una lectura de casi toda su producción intelectual, tratando de rastrear y mostrar algunas continuidades y cambios o desplazamientos en sus ideas y preocupaciones. Se muestra que Portantiero elabora una estrategia de explicación social sobre la base de Marx, Lenin, Gramsci, Mao hasta fines de los setenta, preocupado por la socialización del poder y, entonces, de la economía. Las dos últimas décadas se concentra en la construcción de las condiciones de consolidación de la democracia, pensada como un régimen que incluya reconocimiento de minorías y funcione para reducir los monopolios económicos y políticos.

Age, body mass, mass change and dispersal distance of suckling and weaned grey seal (Halichoerus grypus) pups

Grey seal, Halichoerus grypus, pups in the breeding colony at Froan, Norway, have a bimodal pattern of early aquatic behaviour. About 40% of the pups spend their time ashore to save energy, which can be allocated to growth or deposition of energy-rich adipose tissue. The other 60% of the pups enter the sea during suckling and the early postweaning period, and disperse to other locations within the breeding colony. Pups may swim distances up to 12 km. Neonatal aquatic dispersal behaviour may lead to increased energy expenditure for thermoregulation and swimming, and thus lead to a low rate of body mass gain during suckling and a high rate of body mass loss after weaning. Thus, we examined relationships between natal aquatic dispersal behaviour and change in body mass (DeltaBM) in suckling and weaned pups. Suckling pups that had dispersed >2000 m had a significantly lower DBM than suckling pups that dispersed <2000 m or that did not disperse. In weaned pups, there were no effects of aquatic dispersal behaviour on DBM. We suggest that the bimodal natal aquatic dispersal behaviour in grey seals at the study site reflects two different strategies for postweaning survival: to stay ashore and get fat, or to take a swim and acquire diving and feeding skills.

Seawater carbonate chemistry and cell numbers during experiments with dinoflagellates, 2007

The effects of dissolved inorganic carbon (DIC) on the growth of 3 red-tide dinoflagellates (Ceratium lineatum, Heterocapsa triquetra and Prorocentrum minimum) were studied at pH 8.0 and at higher pH levels, depending upon the pH tolerance of the individual species. The higher pH levels chosen for experiments were 8.55 for C. lineatum and 9.2 for the other 2 species. At pH 8.0, which approximates the pH found in the open sea, the maximum growth in all species was maintained until the total DIC concentration was reduced below ~0.4 and 0.2 mM for C. lineatum and the other 2 species, respectively. Growth compensation points (concentration of inorganic carbon needed for maintenance of cells) were reached at ~0.18 and 0.05 mM DIC for C. lineatum and the other 2 species, respectively. At higher pH levels, maximum growth rates were lower compared to growth at pH 8, even at very high DIC concentrations, indicating a direct pH effect on growth. Moreover, the concentration of bio-available inorganic carbon (CO2 + HCO3-) required for maintenance as well as the half-saturation constants were increased considerably at high pH compared to pH 8.0. Experiments with pH-drift were carried out at initial concentrations of 2.4 and 1.2 mM DIC to test whether pH or DIC was the main limiting factor at a natural range of DIC. Independent of the initial DIC concentrations, growth rates were similar in both incubations until pH had increased considerably. The results of this study demonstrated that growth of the 3 species was mainly limited by pH, while inorganic carbon limitation played a minor role only at very high pH levels and low initial DIC concentrations.

Seawater carbonate chemistry and processes during experiments with marine mussel, Mytilus galloprovincialis, 2005

In the context of future scenarios of progressive accumulation of anthropogenic CO2 in marine surface waters, the present study addresses the effects of long-term hypercapnia on a Mediterranean bivalve, Mytilus galloprovincialis. Sea-water pH was lowered to a value of 7.3 by equilibration with elevated CO2 levels. This is close to the maximum pH drop expected in marine surface waters during atmosextracellular pHric CO2 accumulation. Intra- and extracellular acid-base parameters as well as changes in metabolic rate and growth were studied under both normocapnia and hypercapnia. Long-term hypercapnia caused a permanent reduction in haemolymph pH. To limit the degree of acidosis, mussels increased haemolymph bicarbonate levels, which are derived mainly from the dissolution of shell CaCO3. Intracellular pH in various tissues was at least partly compensated; no deviation from control values occurred during long-term measurements in whole soft-body tissues. The rate of oxygen consumption fell significantly, indicating a lower metabolic rate. In line with previous reports, a close correlation became evident between the reduction in extracellular pH and the reduction in metabolic rate of mussels during hypercapnia. Analysis of frequency histograms of growth rate revealed that hypercapnia caused a slowing of growth, possibly related to the reduction in metabolic rate and the dissolution of shell CaCO3 as a result of extracellular acidosis. In addition, increased nitrogen excretion by hypercapnic mussels indicates the net degradation of protein, thereby contributing to growth reduction. The results obtained in the present study strongly indicate that a reduction in sea-water pH to 7.3 may be fatal for the mussels. They also confirm previous observations that a reduction in sea-water pH below 7.5 is harmful for shelled molluscs.

Investigative journalism in Mexico: between ideals and realities. The case of Morelia

The aim of this paper is to analyse the state of the investigative journalism in Mexico, especially the one that is practiced at the local level in the provinces. That is, this research is based upon a case study conducted in Morelia, the capital city of the state of Michoacán. The empirical evidence will show that there is an evident divergence regarding the practice of the investigative journalism: on the one hand, journalists are aware of what this concept involves and they consider that they practice it on a regular basis; but, on the other, the content analysis prove otherwise. In other words, the account of what is actually printed significantly differs from the news workers’ perceptions, because the former shows a poorly developed journalistic investigation practice.

Adaptación del sector turístico al cambio climático en España. La importancia de las acciones a escala local y en empresas turísticas

El 5º Informe del IPCC (Panel Intergubernamental de Cambio Climático, 2014) señala que el turismo será una de las actividades económicas que mayores efectos negativos experimentará en las próximas décadas debido al calentamiento térmico del planeta. En España, el turismo es una fuente principal de ingresos y de creación de puestos de trabajo en su economía. De ahí que sea necesaria la puesta en marcha de medidas de adaptación a la nueva realidad climática que, en nuestro país, va a suponer cambios en el confort climático de los destinos e incremento de extremos atmosféricos. Frente a los planes de adaptación al cambio climático en la actividad turística, elaborados por los gobiernos estatal y regional, que apenas se han desarrollado en España, la escala local muestra interesantes ejemplos de acciones de adaptación al cambio climático, desarrolladas tanto por los municipios (energía, transporte, vivienda, planificación urbanística) como por la propia empresa turística (hoteles, campings, apartamentos). Medidas de ahorro de agua y luz, fomento del transporte público y de las energías limpias, creación de zonas verdes urbanas y adaptación a los extremos atmosféricos destacan como acciones de mitigación del cambio climático en los destinos turísticos principales de nuestro país.

The Formation of a Liberal Thinker: Georg Jellinek and his Early Writings (1872 – 1878)

Georg Jellinek is known as one of the most prominent representative of German legal positivism. This article aims at identifying and discussing the more theoretical- political connotation of Jellinek’s thought with a particular focus on his liberal inspiration. According to the perspective of the history of political thought, this article shows how some intellectual premises to Jellinek’s liberalism take shape and emerge from a series of young Jellinek’s writings on history of philosophy and history of ideas.

Étude exploratoire du recours à des interventions médicales de type "lourd' pour soulager la souffrance existentielle en fin de vie

Au cours du siècle dernier, des améliorations au niveau des conditions de vie ainsi que des avancées importantes dans les sciences biomédicales ont permis de repousser les frontières de la vie. Jusqu’au début du XXe Siècle, la mort était un processus relativement bref, survenant à la suite de maladies infectieuses et avait lieu à la maison. À présent, elle survient plutôt après une longue bataille contre des maladies incurables et des afflictions diverses liées à la vieillesse et a le plus souvent lieu à l’hôpital. Pour comprendre la souffrance du malade d’aujourd’hui et l’aborder, il faut comprendre ce qu’engendre comme ressenti ce nouveau contexte de fin de vie autant pour le patient que pour le clinicien qui en prend soin. Cette thèse se veut ainsi une étude exploratoire et critique des enjeux psychologiques relatifs à cette mort contemporaine avec un intérêt premier pour l’optimisation du soulagement de la souffrance existentielle du patient dans ce contexte. D’abord, je m’intéresserai à la souffrance du patient. À travers un examen critique des écrits, une définition précise et opérationnelle, comportant des critères distinctifs, de ce qu’est la souffrance existentielle en fin de vie sera proposée. Je poserai ainsi l’hypothèse que la souffrance peut être définie comme une forme de construction de l’esprit s’articulant autour de trois concepts : intégrité, altérité et temporalité. D’abord, intégrité au sens où initialement l’individu malade se sent menacé dans sa personne (relation à soi). Ensuite, altérité au sens où la perception de ses conditions extérieures a un impact sur la détresse ressentie (relation à l’Autre). Et finalement, temporalité au sens où l’individu souffrant de façon existentielle semble bien souvent piégé dans un espace-temps particulier (relation au temps). Ensuite, je m’intéresserai à la souffrance du soignant. Dans le contexte d’une condition terminale, il arrive que des interventions lourdes (p. ex. : sédation palliative profonde, interventions invasives) soient discutées et même proposées par un soignant. Je ferai ressortir diverses sources de souffrance propres au soignant et générées par son contact avec le patient (exemples de sources de souffrance : idéal malmené, valeurs personnelles, sentiment d’impuissance, réactions de transfert et de contre-transfert, identification au patient, angoisse de mort). Ensuite, je mettrai en lumière comment ces dites sources de souffrance peuvent constituer des barrières à l’approche de la souffrance du patient, notamment par l’influence possible sur l’approche thérapeutique choisie. On constatera ainsi que la souffrance d’un soignant contribue par moment à mettre en place des mesures visant davantage à l’apaiser lui-même au détriment de son patient. En dernier lieu, j'élaborerai sur la façon dont la rencontre entre un soignant et un patient peut devenir un espace privilégié afin d'aborder la souffrance. J'émettrai certaines suggestions afin d'améliorer les soins de fin de vie par un accompagnement parvenant à mettre la technologie médicale au service de la compassion tout en maintenant la singularité de l'expérience du patient. Pour le soignant, ceci nécessitera une amélioration de sa formation, une prise de conscience de ses propres souffrances et une compréhension de ses limites à soulager l'Autre.

Plan de estrategias para mejorar la participación de Geomedicos y posicionamiento de la categoría

Geomedicos S.A.S identifica mayor cantidad de servicios a sus clientes generando mayor valor agregado, logrando fidelización y canaliza las necesidades de su cliente potencial, basado en buenos estándares de calidad; representado en un buen servicio. Adoptando el siguiente paradigma “la calidad de un producto o servicio conduce a la satisfacción del cliente que lleva a la fidelización del cliente, que conduce a la rentabilidad. La participación de todo un grupo de trabajo orientados a dar las mejor resultados, es lo que más motiva para hacer que la empresa de logros positivos y óptimos de acuerdo a un plan estratégico que se hace interno y productivo para que la gerencia tome decisiones acordes al crecimiento y ponderación; determinando incentivos que favorezcan la calidad de vida de cada uno de sus empleados y de sus familias, haciendo partícipe a cada uno de ellos.

Functional alkali tantalate 2D structures for microelectronics and related applications

Alkali tantalates and niobates, including K(Ta / Nb)O3, Li(Ta / Nb)O3 and Na(Ta / Nb)O3, are a very promising ferroic family of lead-free compounds with perovskite-like structures. Their versatile properties make them potentially interesting for current and future application in microelectronics, photocatalysis, energy and biomedics. Among them potassium tantalate, KTaO3 (KTO), has been raising interest as an alternative for the well-known strontium titanate, SrTiO3 (STO). KTO is a perovskite oxide with a quantum paraelectric behaviour when electrically stimulated and a highly polarizable lattice, giving opportunity to tailor its properties via external or internal stimuli. However problems related with the fabrication of either bulk or 2D nanostructures makes KTO not yet a viable alternative to STO. Within this context and to contribute scientifically to the leverage tantalate based compounds applications, the main goals of this thesis are: i) to produce and characterise thin films of alkali tantalates by chemical solution deposition on rigid Si based substrates, at reduced temperatures to be compatible with Si technology, ii) to fulfil scientific knowledge gaps in these relevant functional materials related to their energetics and ii) to exploit alternative applications for alkali tantalates, as photocatalysis. In what concerns the synthesis attention was given to the understanding of the phase formation in potassium tantalate synthesized via distinct routes, to control the crystallization of desired perovskite structure and to avoid low temperature pyrochlore or K-deficient phases. The phase formation process in alkali tantalates is far from being deeply analysed, as in the case of Pb-containing perovskites, therefore the work was initially focused on the process-phase relationship to identify the driving forces responsible to regulate the synthesis. Comparison of phase formation paths in conventional solid-state reaction and sol-gel method was conducted. The structural analyses revealed that intermediate pyrochlore K2Ta2O6 structure is not formed at any stage of the reaction using conventional solid-state reaction. On the other hand in the solution based processes, as alkoxide-based route, the crystallization of the perovskite occurs through the intermediate pyrochlore phase; at low temperatures pyrochlore is dominant and it is transformed to perovskite at >800 °C. The kinetic analysis carried out by using Johnson-MehlAvrami-Kolmogorow model and quantitative X-ray diffraction (XRD) demonstrated that in sol-gel derived powders the crystallization occurs in two stages: i) at early stage of the reaction dominated by primary nucleation, the mechanism is phase-boundary controlled, and ii) at the second stage the low value of Avrami exponent, n ~ 0.3, does not follow any reported category, thus not permitting an easy identification of the mechanism. Then, in collaboration with Prof. Alexandra Navrotsky group from the University of California at Davis (USA), thermodynamic studies were conducted, using high temperature oxide melt solution calorimetry. The enthalpies of formation of three structures: pyrochlore, perovskite and tetragonal tungsten bronze K6Ta10.8O30 (TTB) were calculated. The enthalpies of formation from corresponding oxides, ∆Hfox, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -203.63 ± 2.84 kJ/mol, - 358.02 ± 3.74 kJ/mol, and -1252.34 ± 10.10 kJ/mol, respectively, whereas from elements, ∆Hfel, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -1408.96 ± 3.73 kJ/mol, -2790.82 ± 6.06 kJ/mol, and -13393.04 ± 31.15 kJ/mol, respectively. The possible decomposition reactions of K-deficient KTa2.2O6 pyrochlore to KTaO3 perovskite and Ta2O5 (reaction 1) or to TTB K6Ta10.8O30 and Ta2O5 (reaction 2) were proposed, and the enthalpies were calculated to be 308.79 ± 4.41 kJ/mol and 895.79 ± 8.64 kJ/mol for reaction 1 and reaction 2, respectively. The reactions are strongly endothermic, indicating that these decompositions are energetically unfavourable, since it is unlikely that any entropy term could override such a large positive enthalpy. The energetic studies prove that pyrochlore is energetically more stable phase than perovskite at low temperature. Thus, the local order of the amorphous precipitates drives the crystallization into the most favourable structure that is the pyrochlore one with similar local organization; the distance between nearest neighbours in the amorphous or short-range ordered phase is very close to that in pyrochlore. Taking into account the stoichiometric deviation in KTO system, the selection of the most appropriate fabrication / deposition technique in thin films technology is a key issue, especially concerning complex ferroelectric oxides. Chemical solution deposition has been widely reported as a processing method to growth KTO thin films, but classical alkoxide route allows to crystallize perovskite phase at temperatures >800 °C, while the temperature endurance of platinized Si wafers is ~700 °C. Therefore, alternative diol-based routes, with distinct potassium carboxylate precursors, was developed aiming to stabilize the precursor solution, to avoid using toxic solvents and to decrease the crystallization temperature of the perovskite phase. Studies on powders revealed that in the case of KTOac (solution based on potassium acetate), a mixture of perovskite and pyrochlore phases is detected at temperature as low as 450 °C, and gradual transformation into monophasic perovskite structure occurs as temperature increases up to 750 °C, however the desired monophasic KTaO3 perovskite phase is not achieved. In the case of KTOacac (solution with potassium acetylacetonate), a broad peak is detected at temperatures <650 °C, characteristic of amorphous structures, while at higher temperatures diffraction lines from pyrochlore and perovskite phases are visible and a monophasic perovskite KTaO3 is formed at >700 °C. Infrared analysis indicated that the differences are due to a strong deformation of the carbonate-based structures upon heating. A series of thin films of alkali tantalates were spin-coated onto Si-based substrates using diol-based routes. Interestingly, monophasic perovskite KTaO3 films deposited using KTOacac solution were obtained at temperature as low as 650 °C; films were annealed in rapid thermal furnace in oxygen atmosphere for 5 min with heating rate 30 °C/sec. Other compositions of the tantalum based system as LiTaO3 (LTO) and NaTaO3 (NTO), were successfully derived as well, onto Si substrates at 650 °C as well. The ferroelectric character of LTO at room temperature was proved. Some of dielectric properties of KTO could not be measured in parallel capacitor configuration due to either substrate-film or filmelectrode interfaces. Thus, further studies have to be conducted to overcome this issue. Application-oriented studies have also been conducted; two case studies: i) photocatalytic activity of alkali tantalates and niobates for decomposition of pollutant, and ii) bioactivity of alkali tantalate ferroelectric films as functional coatings for bone regeneration. Much attention has been recently paid to develop new type of photocatalytic materials, and tantalum and niobium oxide based compositions have demonstrated to be active photocatalysts for water splitting due to high potential of the conduction bands. Thus, various powders of alkali tantalates and niobates families were tested as catalysts for methylene blue degradation. Results showed promising activities for some of the tested compounds, and KNbO3 is the most active among them, reaching over 50 % degradation of the dye after 7 h under UVA exposure. However further modifications of powders can improve the performance. In the context of bone regeneration, it is important to have platforms that with appropriate stimuli can support the attachment and direct the growth, proliferation and differentiation of the cells. In lieu of this here we exploited an alternative strategy for bone implants or repairs, based on charged mediating signals for bone regeneration. This strategy includes coating metallic 316L-type stainless steel (316L-SST) substrates with charged, functionalized via electrical charging or UV-light irradiation, ferroelectric LiTaO3 layers. It was demonstrated that the formation of surface calcium phosphates and protein adsorption is considerably enhanced for 316L-SST functionalized ferroelectric coatings. Our approach can be viewed as a set of guidelines for the development of platforms electrically functionalized that can stimulate tissue regeneration promoting direct integration of the implant in the host tissue by bone ingrowth and, hence contributing ultimately to reduce implant failure.

Equipment quality control

Mammography equipment must be evaluated to ensure that images will be of acceptable diagnostic quality with lowest radiation dose. Quality Assurance (QA) aims to provide systematic and constant improvement through a feedback mechanism to address the technical, clinical and training aspects. Quality Control (QC), in relation to mammography equipment, comprises a series of tests to determine equipment performance characteristics. The introduction of digital technologies promoted changes in QC tests and protocols and there are some tests that are specific for each manufacturer. Within each country specifi c QC tests should be compliant with regulatory requirements and guidance. Ideally, one mammography practitioner should take overarching responsibility for QC within a service, with all practitioners having responsibility for actual QC testing. All QC results must be documented to facilitate troubleshooting, internal audit and external assessment. Generally speaking, the practitioner’s role includes performing, interpreting and recording the QC tests as well as reporting any out of action limits to their service lead. They must undertake additional continuous professional development to maintain their QC competencies. They are usually supported by technicians and medical physicists; in some countries the latter are mandatory. Technicians and/or medical physicists often perform many of the tests indicated within this chapter. It is important to recognise that this chapter is an attempt to encompass the main tests performed within European countries. Specific tests related to the service that you work within must be familiarised with and adhered too.

Aproveitamento de subprodutos da indústria de carne suína: caracterização físico-química do queijo de porco

Headcheese is a meat sausage originated from Europe made from hog slaughter by-products. It is a much appreciated product in the South of Brazil which is increasingly established in the market, however it does not have official regulations yet. This study aimed to present the physicochemical characterization of headcheese in a western Santa Catarina industry supervised by Companhia Integrada de Desenvolvimento Agrícola de Santa Catarina and assess 10 different brands to find the relationship between chemical composition and texture profile analysis (TPA). Thus, the chemical composition, energy value, total nitrite, lipid oxidation and physical parameters (color and texture) were evaluated. The product exhibited great variability in moisture content, lipid and protein because the different formulations, processing and intrinsic and extrinsic characteristics of raw material. The utilization of offal provided higher cholesterol and iron levels, and the high content of collagen was accountable for the shear force responses (7.84 ± 1.68 N). The product showed higher amount of sodium, due to the use of additives, but calcium levels were compatible with other sausages. There was a predominance of polyunsaturated fatty acids and polyunsaturated fatty acids/saturated fatty acids ratio was more favorable than other sausage in the same category. Nitrite assured preservation effects and thus lower product levels of oxidation were observed. The high Water Activity and pH 6.5 showed that the product is susceptible to growth of pathogens and requires cooling for preservation. Its brownish occurred due to cooking and production of metmyoglobin. There was a strong positive correlation between collagen and attributes of TPA, especially for chewiness (r = 0.855). The use of Hierarchical Cluster Analysis and Principal Component Analysis were able to separate three groups based on the amount of collagen and texture attributes, especially hardness, gumminess and chewiness.

Entre o cartão-postal e a cidade real: um estudo sobre paisagem e produção imobiliária em Natal/RN

Recent studies concerning the landscape have investigated the most important activities that contribute for its modification and have tried to better understand the society through the marks left by its quotidian. It is understood that singular landscapes constitute the cultural patrimonies of the cities, once they are part of the daily life of the citizens and are present in their social representations. Some contemporary authors defend the preservation of the natural and urban landscape trying, specially, to keep its importance for the local population. Natal is a city where the ambient qualities are well defined and known by the beauty of the area where it is located. Situated just between a river and the sea, the city grew following its geographic characteristics. The Potengi River, the Atlantic Ocean and the vast dunes ecosystem represented natural limits to the urban expansion; at the same time they have favored the development of a landscape pattern marked by the dialectic between the natural elements and the human interventions. However, this relationship changed after the intensification of the high rising development process that took place since the 1960s. The urban legislation tried to preserve the features of the local landscape delimiting Areas for Controlling Building High , destined to protect the scenic value of some parts of the city. On the other hand, the civil construction sector has made constant pressure in sense to abolish or to modify this legal instrument, aiming profits that have increased, in the 1990s, because of the consumption and the qualification of the urban space for tourist activities. It is necessary the raising of new elements to stimulate the quarrel about the landscape preservation, the process of the urban space production and the best way for the legislation implementation. This work tries to raise elements about the subject at local level, in sense to use Natal City experience to contribute for the formulation of indicators to raise the question about the lack of measure for subjective values, for example the cultural and affective value of the landscape. The natural elements inserted in the urban profile, represent strong visual references and supply identity to the town; they are part of the collective imaginary and are detached in the social context of the city. Then, why the preservation of the landscape, that estimates the improvement in the quality of life, is not enough to justify the controlling building high already previewed as part of Natal City Legislation? These questions send us to the approach of the landscape, as a community patrimony, alerting that some of its significant esthetics attributes must be preserved as a legacy for the future generations

Three Essays in Empirical Asset Pricing

The financial crisis of 2007-2008 led to extraordinary government intervention in firms and markets. The scope and depth of government action rivaled that of the Great Depression. Many traded markets experienced dramatic declines in liquidity leading to the existence of conditions normally assumed to be promptly removed via the actions of profit seeking arbitrageurs. These extreme events motivate the three essays in this work. The first essay seeks and fails to find evidence of investor behavior consistent with the broad 'Too Big To Fail' policies enacted during the crisis by government agents. Only in limited circumstances, where government guarantees such as deposit insurance or U.S. Treasury lending lines already existed, did investors impart a premium to the debt security prices of firms under stress. The second essay introduces the Inflation Indexed Swap Basis (IIS Basis) in examining the large differences between cash and derivative markets based upon future U.S. inflation as measured by the Consumer Price Index (CPI). It reports the consistent positive value of this measure as well as the very large positive values it reached in the fourth quarter of 2008 after Lehman Brothers went bankrupt. It concludes that the IIS Basis continues to exist due to limitations in market liquidity and hedging alternatives. The third essay explores the methodology of performing debt based event studies utilizing credit default swaps (CDS). It provides practical implementation advice to researchers to address limited source data and/or small target firm sample size.