Aditivação de pastas geopoliméricas com tetraborato de sódio e látex não iônico para cimentação de Poços de Petróleo

The development of activities in the oil and gas sector has been promoting the search for materials more adequate to oilwell cementing operation. In the state of Rio Grande do Norte, the cement sheath integrity tend to fail during steam injection operation which is necessary to increase oil recovery in reservoir with heavy oil. Geopolymer is a material that can be used as alternative cement. It has been used in manufacturing of fireproof compounds, construction of structures and for controlling of toxic or radioactive waste. Latex is widely used in Portland cement slurries and its characteristic is the increase of compressive strength of cement slurries. Sodium Tetraborate is used in dental cement as a retarder. The addition of this additive aim to improve the geopolymeric slurries properties for oilwell cementing operation. The slurries studied are constituted of metakaolinite, potassium silicate, potassium hydroxide, non-ionic latex and sodium tetraborate. The properties evaluated were: viscosity, compressive strength, thickening time, density, fluid loss control, at ambient temperature (27 ºC) and at cement specification temperature. The tests were carried out in accordance to the practical recommendations of the norm API RP 10B. The slurries with sodium tetraborate did not change either their rheological properties or their mechanical properties or their density in relation the slurry with no additive. The increase of the concentration of sodium tetraborate increased the water loss at both temperatures studied. The best result obtained with the addition of sodium tetraborate was thickening time, which was tripled. The addition of latex in the slurries studied diminished their rheological properties and their density, however, at ambient temperature, it increased their compressive strength and it functioned as an accelerator. The increase of latex concentration increased the presence of water and then diminished the density of the slurries and increased the water loss. From the results obtained, it was concluded that sodium tetraborate and non-ionic latex are promising additives for geopolymer slurries to be used in oilwell cementing operation

Leaf anatomy of rubber-tree clones

A seringueira é uma planta de fácil reconhecimento por ser lenhosa, de porte mediano a grande, que apresenta um padrão característico de desfolha e reenfolhamento e, sobretudo, pela produção de látex. O objetivo do trabalho foi efetuar um estudo anatômico e morfológico foliar, comparando os clones RRIM 600 e GT 1 de seringueira &91;Hevea brasiliensis (Wild. ex Adr. de Juss.) Muell.- Arg&93;, desenvolvidos sob as mesmas condições edáficas e climáticas, para obtenção de informações que possam fornecer subsídios para correlações com dados fisiológicos e também diferenciar os clones em relação ao conteúdo de fibras, espessamento de tecidos do parênquima paliçádico e do parênquima lacunoso, caracterização anatômica do pecíolo, número e tamanho de estômatos e fornecer dados referentes a morfologia foliolar. Foram realizadas secções transversais na região do mesófilo, nervura central e pecíolo, seguindo-se os métodos usuais de preparação de lâminas permanentes. Foram realizadas análises biométricas de extensões de tecidos dos parênquimas paliçádico e lacunoso e contagem do número de células do parênquima lacunoso. Paralelamente foram realizadas análises biométricas para aferições de estômatos. Não houve diferenças para a altura das células epidérmicas, altura e número de camadas do parênquima lacunoso e para o comprimento e para a maior largura do limbo foliolar. Porém houve variação para a espessura das células do parênquima paliçádico, sendo que GT 1 apresentou maior espessura em relação a RRIM 600. GT1 apresentou maior número de estômatos em relação a RRIM 600, porém com menor tamanho. GT1 apresentou maior diâmetro da nervura central da folha e do pecíolo e maior quantidade de fibras de esclerênquima que RRIM 600.

Perfil eletroforético do proteinograma sérico de eqüinos com obstrução experimental do cólon menor

Avaliaram-se as alterações do proteinograma sérico de eqüinos submetidos à isquemia e reperfusão do cólon menor por distensão intraluminal. Foram utilizados 10 animais submetidos à laparotomia pelo flanco, em posição quadrupedal, para a indução de obstrução no cólon menor durante um período de quatro horas. Cinco animais foram instrumentados, mas sem distensão (grupo controle - G1). em cinco outros animais, foi realizada isquemia mural por distensão do cólon menor via manguito inflado com 40mmHg (grupo distendido - G2). Foram colhidas amostras de sangue antes da intervenção cirúrgica (M1), com 4 horas da colocação do manguito (M2) e com 3 horas (M3) e 12 horas (M4) de reperfusão. Após centrifugação e fracionamento das amostras, as proteínas de fase aguda foram separadas por eletroforese em gel de poliacrilamida contendo SDS-PAGE, e suas concentrações determinadas por densitometria computadorizada. Foram encontradas 19 proteínas no fracionamento eletroforético, com peso molecular variando de 185.000 a 14.000 Daltons (Da). Os pesos moleculares encontrados, correspondentes às proteínas mais conhecidas, foram ceruloplasmina, 130.000 Da; proteína C-reativa, 122.000 Da; transferrina, 85.000 Da; α1-antitripsina, 61.000 Da; haptoglobina, 47.000 Da; e glicoproteína ácida, 40.000 Da. Os resultados mostram que proteínas de fase aguda se alteram após o trauma cirúrgico.

Peritoneal fluid changes in horses subjected to small colon distension

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ocorrência de Bacillus cereus em leite integral e capacidade enterotoxigênica das cepas isoladas

Pesquisaram-se a presença de Bacillus cereus e a produção de enterotoxinas produzidas por esses microrganismos em 120 amostras de diversos tipos de leite. Bacillus cereus foi isolado e identificado em 22 (73,3%), 15 (50,0%), 29 (96,7%) e quatro (13,3%) amostras de leite em pó, cru, pasteurizado e UAT (longa vida), respectivamente. Para a detecção de enterotoxinas pela técnica da alça ligada de coelho, foram positivos, respectivamente, três (13,6%), um (7,1%) e 10 (35,7%) microrganismos isolados das amostras de leite em pó, leite cru e leite pasteurizado. Pelo teste de aumento de permeabilidade vascular, dois (9,1%), um (7,1%), um (3,6%) e um (4,0%) microrganismos isolados de leite em pó, cru, pasteurizado e UAT apresentaram-se enterotoxigênicos, respectivamente. O uso da técnica de aglutinação passiva em látex demonstrou a produção da toxina diarréica por três (33,3%), sete (63,6%), quatro (30,8%) e oito (80,0%) microrganismos isolados, respectivamente, de leite em pó, cru, pasteurizado e UAT. Os resultados indicam um risco potencial, podendo colocar em risco a saúde dos consumidores desses produtos.

Ramos do arco aórtico de bubalinos

Os ramos do arco aórtico (Arcus aortae) em bubalinos foram investigados neste trabalho. Assim, foram dissecadas as artérias oriundas desse arco previamente injetadas com solução corada de látex Neoprene 650â (Du Pont do Brasil S.A.) em 20 fetos dessa espécie, machos e fêmeas com idades entre 4 e 8 meses de gestação. em 80% dos casos, observou-se que o tronco braquiocefálico (Truncus brachiocephalicus) emite a artéria subclávia (Arteria subclavia) esquerda, artérias carótidas comuns (Arteria carotis communis) esquerda e direita, sem caracterizar tronco bicarotídeo (Truncus bicaroticus), e a artéria subclávia direita. As artérias subclávias direita e esquerda originam em comum o tronco costocervical (Truncus costocervicalis), a artéria cervical superficial (Arteria cervicalis superficialis), artérias axilares (Arteria axillaris) e artéria torácica interna (Arteria thoracica interna). em 20% dos casos, o tronco braquiocefálico origina a artéria subclávia esquerda em comum ao tronco costocervical esquerdo; em seguida, emite a artéria carótida comum esquerda e termina trifurcando-se em artéria carótida comum direita, artéria subclávia direita e tronco costocervical direito, sendo que as artérias subclávias direita e esquerda têm origem comum com as artérias cervical superficial, axilar e torácica interna, com a presença do tronco bicarotídeo, característico dos bovinos.

Origem das artérias celíaca e mesentérica cranial em bubalinos (Bubalus bubalis, L. 1758)

Com o intuito de conhecer melhor o sistema arterial nesta espécie, descrevemos a origem das artérias celíaca e mesentérica cranial dos bubalinos. Utilizamos 30 fetos e 1 animal adulto. Os fetos variavam de 4 a 8 meses de idade e tiveram seus vasos injetados com solução de látex - Neoprene, tiveram seus vasos dissecados, e um animal adulto, que teve seus vasos dissecados no local de abate. Observamos que as artérias celíaca e mesentérica cranial originavam-se da porção torácica da aorta em todos os casos, estando isoladas em 90,33% deles e em tronco comum (tronco celíaco mesentérico) em 9,67% dos casos.

Descrição anátomo-topográfica do coração da paca (Agouti paca)

Background: The domestic animals heart is a conical hollow viscera, surrounded by pericardium, laterally compressed, accompanying the thorax shape. Atriums constituted the heart basis and their auricles partially bound the initial portion of the aorta and pulmonary trunk. In mammals, heart is kept suspended in the thoracic cavity and the pericardic sac is fixed dorsally by great veins and arteries roots, and ventrally fixed to the sternum, although its fixation to the diaphragm varies among species. This paper aimed to describe morphological aspects of the heart of the paca, the second biggest Brazilian rodent.Materials, Methods & Results: There were used 12 hearts of adult pacas for this study, obtained from the UNESP, Jaboticabal, SP, which died due fights or anesthesia during bandages or radiograph exams. The thoracic aorta was filled with colored latex and the animal was set in a 10% formaldehyde solution for at least 72 hours. The thoracic cavity was dissected and hearts individualized and measured with a paquimeter, lateromedially, craniocaudally and dorsoventrally. The paca heart is placed between the first and fifth intercostal space (ICS), in a craniocaudal oblique position; its basis is craniodorsally positioned, on the middle third between the first and second ICS and its apex is located near the sternodiaphragmatic joint, on the fifth ICS, tilted to the left antimere. The heart is surrounded by pericardium, which from ventrocaudally is originated the sternopericardic ligament, that continues as phrenopericardic ligament. At the heart basis, the rising of the pulmonary trunk was observed and the conus arteriosus formed a typical projection. The aorta also rised from the heart basis and its arch, which was caudally curved, crossed dorsally the pulmonary trunk; the right cranial and caudal cava veins drained to the right atrium. There is a left cranial cava vein, which surrounded the left atrium and joined the right caudal cava vein on the right atrium. The azygos vein joins the right cranial cava vein and four pulmonary veins drained to the left atrium. At palpation, a hard structure on the rising of the aorta was observed, similarly to a cartilaginous tissue, which would be part of the cardiac skeleton. The left and right coronary arteries were observed in all hearts.Discussion: The paca heart is anatomica and topographically similar to those of domestic mammals, differing from them for being placed one intercostal space more cranial and due to the presence of two cranial cava veins, the left and the right ones, besides the presence of the caudal cava vein. This vascular description is similar to that of small rodents, as rats and mice. In paca heart, the sinus venous, the terminal crest, the oval fossa, the atrioventricular valvae, the papillary muscles and tendinous cords, besides smooth atriums and auricles covered by pectinate muscles, were observed. The sternopericardic ligament, which is dorsally elongated as phrenopericardic ligament, is similar to the one present in humans, pigs, castors, and different from the one observed in carnivorous, that presents the phrenopericardic ligament and from the one of horses and ruminants, which present the sternopericardic ligament.

Virulence properties and antimicrobial susceptibility of Shiga toxin-producing Escherichia coli strains isolated from healthy cattle from Parana State, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de material compósito a base de raspa de pneu e látex para isolamento térmico

The process of recycling has been stimulated by the markets for several reasons, mainly on economical and environmental. Several products have been developed from recycled materials that already exist as well as several residues have been studied in different forms of applications. The greater majority of the applications for thermal insulation in the domestic, commercial and industrial systems have been elaborated in the temperature ranges between low to medium reaching up to 180oC. Many materials such as glass wool, rock wool, polystyrene are being used which are aggressive to the environment. Such materials in spite of the effectiveness in the retention of heat flow, they cost more and when discarded take several years to be absorbed by the nature. This way, in order to adapt to a world politics concerning the preservation of the environment, the present study was intended to develop a material composed of natural/biodegradable materials and industrial residues. The development of such a product in the form of a composite material based on tyre scrapes and latex for thermal insulation is presented in this research work. Thermal and physical properties of the tire scrapes as well as latex were studied in order to use them as raw materials for the manufacture of the intended composite to be applied as a thermal insulator in hot and cold systems varying between 0ºC and 200oC, respectively. Composite blankets were manufactured manually, in weight proportions of 1:1 (50:50%); 1:2 (33:67%) and 2:1 (67:33%) (tire scrapes: latex) respectively. Physical, mechanical and thermal properties of the composites were analyzed to obtain data about the viability of using the composite as a thermal insulator. The analyses carried out were based on standards ABNT, ASTM and UL. The maximum temperature obtained for the composite as a thermal insulator was 200ºC, which meets the range of applications that could be used as a thermal insulator in domestic as well as industrial purposes. The experimental results prove that the composite can be used as a thermal insulator on heated or cooled surface

Biodegradation of Coir and Sisal Applied in the Automotive Industry

This paper discusses the results of biodegradability tests of natural fibers used by the automotive industry, namely: coir, coir with latex, and sisal. The biodegradation of coir, coir with latex, and of sisal fibers was determined by monitoring the production of carbon dioxide (CO(2)) (IBAMA-E.1.1.2, 1988) and fungal growth (DIN 53739, 1984). The contents of total extractives, lignin, holocellulose, ashes, carbon, nitrogen and hydrogen of the fibers under study were determined in order to ascertain their actual content and to understand the results of the biodegradation tests. The production of CO(2) indicated low biodegradation, i.e., about 10% in mass, for all the materials after 45 days of testing; in other words, no material inhibited glucose degradation. However, the percentage of sisal fiber degradation was fourfold higher than that of coir with latex in the same period of aging. The fungal growth test showed a higher growth rate on sisal fibers, followed by coir without latex. In the case of coir with latex, we believe the fungal growth was not intense, because natural latex produces a bactericide or fungicide for its preservation during bleeding [1]. An evaluation of the materials after 90 days of aging tests revealed breaking of the fibers, particularly sisal and coir without latex, indicating fungal attack and biodegradation processes.

Dependence of the electrical conductivity and elastomeric properties on sample preparation of blends of polyaniline and natural rubber

Blend films (free-standing) containing 20% in volume of polyaniline (PANI) in 80% of natural rubber (NR) were fabricated by casting in three different ways: (1) adding PANI-EB (emeraldine base) dissolved in N-methyl-2-pyrrolidone (NMP) to the latex (NRL), (2) adding PANI-EB dissolved in in-cresol to NR dissolved in xylol (NRD), (3) overlaying the surface of a pure NR cast film with a PANI layer grown by in situ polymerization (NRO). All the films were immersed into HCl solution to achieve the primary doping (protonation) of PANI before the characterization. The main goal here was to investigate the elastomeric and electrical conductivity properties for each blend, which may be applied as pressure and deformation sensors in the future. The characterization was carried out by optical microscopy, dc conductivity, vibrational spectroscopy (infrared absorption and Raman scattering), thermogravimetry analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), and tensile stress-strain curves. The results suggest that the NRL blend is the most suitable in terms of mechanical and electrical properties required for applications in pressure and deformation sensors: a gain of conductivity without losing the elastomeric property of the rubber. (c) 2005 Wiley Periodicals, Inc.

Thermoplastic starch/natural rubber blends

Thermoplastic starch/natural rubber polymer blends were prepared using directly natural latex and cornstarch. The blends were prepared in an intensive batch mixer at 150 degreesC, with natural rubber content varying from 2.5 to 20%. The blends were characterised by mechanical analysis (stress-strain) and by scanning electron microscopy. The results revealed a reduction in the modulus and in tensile strength, becoming the blends less brittle than thermoplastic starch alone. Phase separation was observed in some compositions and was dependent on rubber and on plasticiser content (glycerol). Increasing plasticiser content made possible the addition of higher amounts of rubber. The addition of rubber was, however, limited by phase separation the appearance of which depended on the glycerol content. Scanning electron microscopy showed a good dispersion of the natural rubber in the continuos phase of thermoplastic starch matrix. (C) 2003 Elsevier B.V. Ltd. All rights reserved.

Monitoramento e avaliação da borracha natural crua utilizando a técnica de análise térmica dinâmico-mecânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de clones de borracha natural crua por ensaios padrão e análise dinâmico-mecânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)