Millstone Hill电离层F层等效风场的气候学研究

Neutral winds and electric fields in the ionospheric F layer play important roles in the variations of the ionosphere, and also affect the thermospheric circulation via the close coupling between the ionosphere and the thermosphere. By now, the neutral winds and electric drifts are generally observed with ground-based Fabry-Perot interferometers (FPI) and incoherent scatter radars (ISR), rockets, and satellite-borne instrument. Based on the servo theory, the ionospheric equivalent winds, which include the information of both the neutral winds and electric fields, can be derived from these characteristic parameters observed by ionosondes. This indirect derivation has potential values in climatological researches and space weather forecast. With the data set of the incoherent scatter radar observations at Millstone Hill, USA, from 1976 to 2006, we statistically analyzed the climatological variations of the vertical component of the equivalent winds (VEWs) over Millstone Hill, which are derived from the ionospheric key parameters (the peak electron number density and peak height of the F2 layer, NmF2 and hmF2) on the basis of the servo theory, Liu's method, and measurements from the ion line-of-sight velocity as well. The main results of this analysis are summarized as follows: (1) The values of VEWs over Millstone Hill during nighttime are stronger than in the daytime, and the upward drift dominates most of the day. In 1993, Hagan found that the component of the neutral winds in the magnetic meridion in daytime is weaker than during nighttime under both solar maximum and minimum conditions; he also found that the equatorward winds dominate most of the day. Both results suggest that the thermosphere in Millstone Hill is modulated by the aurorally driven high-latitude circulation cell; that is, during geomagnetic quiet periods, the average auroral activity is strong enough to drive thermospheric circulation equatorward for most of the day at Millstone Hill. Moreover, since ion drag is the strongest during daytime when F region densities are enhanced by photoionization, the wind speeds are smaller during the daytime than in the nighttime. (2) There is equinoctial symmetry in VEWs at Millstone Hill. The amplitudes and phases of VEWs in spring are quite similar to those in autumn. In contrast, the nighttime upward drift in winter is weaker than in summer and the difference becomes more significant with increasing solar activity. This solstice asymmetry indicates that, the aurorally driven circulation in the northern hemisphere at Millstone Hill latitude is weaker in winter due to arctic darkness, because the subsolar point is in the southern hemisphere. (3) The comparison of the VEWs derived from three methods, i.e., the servo theory, Liu's method, and the ISR ion line-of-sight velocity measurements, indicates that the amplitudes and main phase tendencies of these VEWs accord well with each other during nighttime hours. However, the case in the daytime is relatively worse. This daytime discrepancy can be explained in terms of the effects of photochemical processes and the choices of the servo constants. A larger servo constant gives a stronger plasma drift in daytime. Therefore, this study tells how important to choose a suitable constant for deriving VEWs at Millstone Hill.

Utilização de lodo de esgoto na cultura de soja.

Avaliou-se o efeito da utilização de lodo de esgoto, como fonte de fósforo, na fixação do N2 e na produção da soja. Os experimentos foram conduzidos em duas etapas: uma sob condição de casa de vegetação e outra a campo. Em casa-devegetação, oito tratamentos foram impostos: sem fertilização ou aplicação de lodo, adubação química completa, inoculação com rizóbio mais fertilização fosfatada, inoculação com rizóbio sem adição de adubos fosfatados, inoculação mais dose 1 de lodo, inoculação mais dose 2 de lodo, sem inoculação mais dose 1 de lodo, sem inoculação mais dose 2 de lodo. As doses 1 e 2 corresponderam, respectivamente, a 11.2 e 22,4 t ha-1 (base úmida). O experimento a campo foi constituído dos seguintes tratamentos: ausência de adubação química ou lodo, adubação química completa, inoculação mais dose 0 de lodo, inoculação mais dose 1 de lodo, inoculação mais dose 2 de lodo, inoculação mais dose 3 de lodo, inoculação mais adubação química, exceto a nitrogenada. As doses 1, 2 e 3 de lodo, corresponderam a 1,5, 3,0 e 6,0 t ha-1 (base seca), respectivamente. Os experimentos demonstraram que a necessidade de P na cultura da soja pode ser suprida por meio da aplicação de pequenas doses de lodo de esgoto, sem prejuízo para o processo simbiótico ou mesmo para a produção.

An Accelerated Chow and Liu Algorithm: Fitting Tree Distributions to High Dimensional Sparse Data

Chow and Liu introduced an algorithm for fitting a multivariate distribution with a tree (i.e. a density model that assumes that there are only pairwise dependencies between variables) and that the graph of these dependencies is a spanning tree. The original algorithm is quadratic in the dimesion of the domain, and linear in the number of data points that define the target distribution $P$. This paper shows that for sparse, discrete data, fitting a tree distribution can be done in time and memory that is jointly subquadratic in the number of variables and the size of the data set. The new algorithm, called the acCL algorithm, takes advantage of the sparsity of the data to accelerate the computation of pairwise marginals and the sorting of the resulting mutual informations, achieving speed ups of up to 2-3 orders of magnitude in the experiments.

Trauma and the Memory of Politics

Edkins, Jenny, Trauma and the Memory of Politics (Cambridge: Cambridge University Press, 2003), pp.xvii+265 RAE2008

Qualidade do ar interior e os requisitos de ar novo numa unidade hospitalar

Dissertação apresentada à Universidade Fernando Pessoa como parte dos requisitos para obtenção do Grau de Mestre em Engenharia e Gestão Ambiental, ramo de Sistemas Industriais

Qual a eficácia clínica do sistema CEREC com os seus diferentes materiais para reabilitação em prótese fixa e sobre implantes?

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

Determinação de cádmio e chumbo em brinquedos para crianças com idade inferior a 3 anos

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Ciências Farmacêuticas

The day-breaking, if not the sun-rising of the Gospell with the Indians in New-England.

University of California Libraries

PeriScope: An Active Internet Probing and Measurement API

Growing interest in inference and prediction of network characteristics is justified by its importance for a variety of network-aware applications. One widely adopted strategy to characterize network conditions relies on active, end-to-end probing of the network. Active end-to-end probing techniques differ in (1) the structural composition of the probes they use (e.g., number and size of packets, the destination of various packets, the protocols used, etc.), (2) the entity making the measurements (e.g. sender vs. receiver), and (3) the techniques used to combine measurements in order to infer specific metrics of interest. In this paper, we present Periscope: a Linux API that enables the definition of new probing structures and inference techniques from user space through a flexible interface. PeriScope requires no support from clients beyond the ability to respond to ICMP ECHO REQUESTs and is designed to minimize user/kernel crossings and to ensure various constraints (e.g., back-to-back packet transmissions, fine-grained timing measurements) We show how to use Periscope for two different probing purposes, namely the measurement of shared packet losses between pairs of endpoints and for the measurement of subpath bandwidth. Results from Internet experiments for both of these goals are also presented.

On variable frequency microwave processing of heterogeneous chip-on-board assemblies

Variable Frequency Microwave (VFM) processing of heterogeneous chip-on-board assemblies is assessed using a multiphysics modelling approach. The Frequency Agile Microwave Oven Bonding System (FAMOBS) is capable of rapidly processing individual packages on a Chip-On-Board (COB) assembly. This enables each package to be processed in an optimal manner, with temperature ramp rate, maximum temperature and process duration tailored to the specific package, a significant benefit in assemblies containing disparate package types. Such heterogeneous assemblies may contain components such as large power modules alongside smaller modules containing low thermal budget materials with highly disparate processing requirements. The analysis of two disparate packages has been assessed numerically to determine the applicability of the dual section microwave system to curing heterogeneous devices and to determine the influence of differing processing requirements of optimal process parameters.

Revolution and the ritual year: religious conflict and innovation in Cristero Mexico

This article analyses Catholic responses to persecution of the Church by the Mexican state during Mexico's cristero rebellion (1926–9) and seeks to make a new contribution to the revolt's religious history. Faced with the Calles regime's anticlericalism, the article argues, Mexico's episcopate developed an alternative cultic model premised on a revitalised lay religion. The article then focuses on changes and continuities in lay – clerical relations, and on the new religious powers of the faithful, now empowered to celebrate ‘white’ masses and certain sacraments by themselves. The article concludes that persecution created new spaces for lay religious participation, showing the 1910–40 Revolution to be a period of religious, as well as social, upheaval.

Estudio sobre la eficacia del régimen fiscal cooperativo portugués

El ordenamiento jurídico portugués consagra un régimen fiscal especial para el sector cooperativo, basado, al igual que otros ordenamientos como el español o el italiano, en la protección de la mutualidad como forma de organización empresarial especialmente benéfica en el plano social. Para alcanzar ese objetivo, el régimen fiscal cooperativo debe ser selectivo, lo que significa que al legislador se le plantea el reto de establecer criterios para separar, dentro del marco cooperativo, lo que debe ser protegido de lo que no merece protección fiscal. El legislador portugués optó por un modelo basado en dos grupos de ramos cooperativos claramente diferenciados según los beneficios fiscales aplicables, ambos con amplias exenciones fiscales. El presente trabajo no se centra en el contenido de los beneficios aplicables sino en las condiciones que las cooperativas deben reunir para acogerse a esos regímenes fiscales favorables. Estos criterios son: i) una división entre operaciones con socios y operaciones con terceros; ii) una delimitación de las operaciones o actividades cooperativas según estén o no vinculadas con el “fin propio de la cooperativa”; y iii) una estructura prevalentemente mutualista del factor trabajo. Esta fórmula legal tiene su raíz en una legislación de 1929 y se ha mantenido hasta el día de hoy debido en parte a un fenómeno de inercia legislativa. El presente trabajo, basándose en la metodología de la sociología jurídica, asienta en una encuesta dirigida a 64 cooperativas, por la que se buscaba indagar hasta qué punto estos criterios (de acuerdo con los que se seleccionan las cooperativas que pueden acogerse a los regímenes fiscales favorables) cuadran con la realidad cooperativa actual. Como era de esperar, la vetustez del régimen hizo que se encontraran desajustes muy significativos, que reclaman una reforma urgente.

Biaxial deformation behavior and mechanical properties of a polypropylene/clay nanocomposite

Polymer nanocomposites offer the potential of enhanced properties such as increased modulus and barrier properties to the end user. Much work has been carried out on the effects of extrusion conditions on melt processed nanocomposites but very little research has been conducted on the use of polymer nanocomposites in semi-solid forming processes such as thermoforming and injection blow molding. These processes are used to make much of today’s packaging, and any improvements in performance such as possible lightweighting due to increased modulus would bring signi?cant bene?ts both economically and environmentally. The work described here looks at the biaxial deformation of polypropylene–clay nanocomposites under industrial forming conditions in order to determine if the presence of clay affects processability, structure and mechanical properties of the stretched material. Melt compounded polypropylene/clay composites in sheet form were biaxially stretched at a variety of processing conditions to examine the effect of high temperature, high strain and high strain rate processing on sheet structure
and properties.

A biaxial test rig was used to carry out the testing which imposed conditions on the sheet that are representative of those applied in injection blow molding and thermoforming. Results show that the presence of clay increases the yield stress relative to the un?lled material at typical processing temperatures and that the sensitivity of the yield stress to temperature is greater for the ?lled material. The stretching process is found to have a signi?cant effect on the delamination and alignment of clay particles (as observed by TEM) and on yield stress and elongation at break of the stretched sheet.