Efficient self-synchronised blind audio watermarking system based on time domain and FFT amplitude modification

Many audio watermarking schemes divide the audio signal into several blocks such that part of the watermark is embedded into each of them. One of the key issues in these block-oriented watermarking schemes is to preserve the synchronisation, i.e. to recover the exact position of each block in the mark recovery process. In this paper, a novel time domain synchronisation technique is presented together with a new blind watermarking scheme which works in the Discrete Fourier Transform (DFT or FFT) domain. The combined scheme provides excellent imperceptibility results whilst achieving robustness against typical attacks. Furthermore, the execution of the scheme is fast enough to be used in real-time applications. The excellent transparency of the embedding algorithm makes it particularly useful for professional applications, such as the embedding of monitoring information in broadcast signals. The scheme is also compared with some recent results of the literature.

High capacity robust audio watermarking scheme based on FFT and linear regression

Peer-reviewed

A robust audio watermarking scheme based on MPEG 1 Layer 3 Compression

This paper describes an audio watermarking scheme based on lossy compression. The main idea is taken from an image watermarking approach where the JPEG compression algorithm is used to determine where and how the mark should be placed. Similarly, in the audio scheme suggested in this paper, an MPEG 1 Layer 3 algorithm is chosen for compression to determine the position of the mark bits and, thus, the psychoacoustic masking of the MPEG 1 Layer 3compression is implicitly used. This methodology provides with a high robustness degree against compression attacks. The suggested scheme is also shown to succeed against most of the StirMark benchmark attacks for audio.

Developing customer-based e-solutions

Logistiikkapalveluiden markkinat ovat viime vuosina muuttuneet. Kilpailtu toimiala ja asiakasvaatimusten muuttuminen ovat pakottaneet yritykset pyrkimään entistä tehokkaampaan jakeluketjuun. Työn tarkoituksena oli tutkia sähköisten asiakasliittymien toimivuutta asiakkaan näkökulmasta Euro Express tuotannossa ja prosessissa. Tarkoituksena oli selvittää eri sidosryhmien vaatimukset prosessille huomioiden sähköisen liiketoiminnan tuomat edut ja ominaispiirteet. Tavoitteena oli kuvata olemassa oleva prosessi ja tutkia prosessin rajapinnat –asiakas, tuotanto ja ulkoiset sidosryhmät. Tutkielmassa sähköisten ratkaisujen ominaispiirteet on käyty läpi ja tulevaisuuden kehitysnäkökulmista keskusteltu. Kehittyneiden tietoteknisten ratkaisujen avulla jatkuva prosessien uudistaminen (Business Process Reengineering) on mahdollista. Yleisesti epäolennaisuudet asiakasrajapinnassa, informaation kulussa ja yhteyksissä eri järjestelmien välillä aiheuttavat ongelmia sähköisten ratkaisujen toteuttamisessa. Tulevaisuudessa logistiikka yritykset ottavat entistä enemmän käyttöönsä uudenaikaisia teknologisia ratkaisuja tilaukseen, tuotantoon ja asiakaspalveluun. Näiden uudenlaisten ratkaisujen kehittämisestä on hyötyä sekä käyttäjälle että tarjoajalle, mutta ne ovat myös pakollisia palveluntarjoajalle kehittyäkseen markkinoilla. Tulevaisuudessa kilpailun tiivistyessä ja asiakkaiden vaatimusten kasvaessa on kiinnitettävä entistä suurempaa huomiota koko prosessiketjun toimivuuteen. Uudet teknologiset ratkaisut ja niiden käyttäminen tehokkaasti tuovat yrityksille kilpailuetuja, joita ei muuten olisi saavutettavissa.

Uusien rajapintojen vaikutus Nokia TETRA –rajapintapalvelimen arkkitehtuuriin

Nokia TETRA –järjestelmä on digitaaliseen tekniikkaan pohjautuva radiopuhelinjärjestelmä, joka on tarkoitettu erityisvaatimuksia omaavien organisaatioiden ammattikäyttöön. Sen tyypillisiä käyttäjiä ovat erilaiset viranomaiset, kuten poliisi, palo- ja pelastuslaitos sekä rajavartiolaitos. Se perustuu avoimeen TETRA-standardiin, joka määrittelee tärkeimmät palvelut ja rajapinnat tiettyjen verkkoelementtien välillä. TETRA-järjestelmän käyttöpaikkatyöasemat ja palvelimet perustuvat kaikki samaan Nokia TETRA –rajapintapalvelimen arkkitehtuuriin. Käyttöpaikat tarjoavat tehokkaat toiminnot verkon operatiiviseen käyttöön ja hallintaan. Palvelimet puolestaan tarjoavat ohjelmointirajapintansa kautta kolmansille osapuolille mahdollisuuden luoda TETRA-järjestelmän palveluita käyttäviä sovelluksia. Työn tavoitteena oli tutkia uusien rajapintojen soveltuvuutta sekä selvittää niiden vaikutusta Nokia TETRA –rajapintapalvelimen arkkitehtuuriin. Ensin kartoitettiin nykyisen arkkitehtuurin ongelmat ja puutteet äänikommunikaatioon käytetyssä tiedonsiirrossa, ja äänikommunikaatiossa käyttäjään päin. Näiden ratkaisemiseksi tutkittiin uusia rajapinta-vaihtoehtoja. Parhaiten soveltuvista vaihtoehdoista muodostettiin ratkaisu, jonka vaikutus uuden sukupolven arkkitehtuuriin selvitettiin.

User-driven community-based service development

This final thesis project was carried out in the Industrial Management department of University of Applied Sciences Stadia for Forum Virium Helsinki. The purpose of this study was to answer to the question of how companies can use online customer community of co-creation in service development and what is the value gained from it. The paper combines a range of recently published theoretical works and ongoing customer community case development. The study aims to provide new information and action approaches to new service developers that may increase the success of the community building process. The paper also outlines the benefits of the use of online customer community and offers practical suggestions for maximizing the value gained from the community in service development projects. The concepts and suggestions introduced in the study appear to have notable new possibilities to the service development process but they have to be further tested empirically. This paper describes the online consumer community of co-creation to an important organizational process of innovation management suggesting that it possesses a great value to business. Online customer communities offer a potential of improving the success of new services or products enabling early, penetrable market entry and creating sustainable competitive advantage.

Secure logarithmic audio watermarking scheme based on the human auditory system

Peer-reviewed

Microcontroller-based interface circuit for inductive sensors

This work proposes a fully-digital interface circuit for the measurement of inductive sensors using a low-cost microcontroller (µC) and without any intermediate active circuit. Apart from the µC and the sensor, the circuit just requires an external resistor and a reference inductance so that two RL circuits with a high-pass filter (HPF) topology are formed. The µC appropriately excites such RL circuits in order to measure the discharging time of the voltage across each inductance (i.e. sensing and reference) and then it uses such discharging times to estimate the sensor inductance. Experimental tests using a commercial µC show a non-linearity error (NLE) lower than 0.5%FSS (Full-Scale Span) when measuring inductances from 1 mH to 10 mH, and from 10 mH to 100 mH.

Usability Centered Implementation of a Web Based Value Added Module

Customer specific functionalities are a challenging part of procurement and invoice automation environments. In Basware Enterprise Purchase to Payment product family the customer specific reports are supported only in a basic level without any seamless interface between all EPP products. Also other customer specific functionalities are not supported as there is no customizable interface between the applications and only the most common features are implemented to the products themselves. In this thesis foundations are created for a new web based value added module where it is possible to create seamless customer specific functionalities throughout the whole EPP product family. The work is implemented in a Proof of Concept type of piloting. The system is created in user centered way where the users are able to explain their requests and determine their needs. The result is an excellent foundation for a module that can be developed further.

A feature-based object-oriented expert system to model and support product design

In this paper a computer program to model and support product design is presented. The product is represented through a hierarchical structure that allows the user to navigate across the product’s components, and it aims at facilitating each step of the detail design process. A graphical interface was also developed, which shows visually to the user the contents of the product structure. Features are used as building blocks for the parts that compose the product, and object-oriented methodology was used as a means to implement the product structure. Finally, an expert system was also implemented, whose knowledge base rules help the user design a product that meets design and manufacturing requirements.

Kramerius - Fedora based open source system for a digital library

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Permutation entropy based real-time chatter detection using audio signal in turning process

Machine tool chatter is an unfavorable phenomenon during metal cutting, which results in heavy vibration of cutting tool. With increase in depth of cut, the cutting regime changes from chatter-free cutting to one with chatter. In this paper, we propose the use of permutation entropy (PE), a conceptually simple and computationally fast measurement to detect the onset of chatter from the time series using sound signal recorded with a unidirectional microphone. PE can efficiently distinguish the regular and complex nature of any signal and extract information about the dynamics of the process by indicating sudden change in its value. Under situations where the data sets are huge and there is no time for preprocessing and fine-tuning, PE can effectively detect dynamical changes of the system. This makes PE an ideal choice for online detection of chatter, which is not possible with other conventional nonlinear methods. In the present study, the variation of PE under two cutting conditions is analyzed. Abrupt variation in the value of PE with increase in depth of cut indicates the onset of chatter vibrations. The results are verified using frequency spectra of the signals and the nonlinear measure, normalized coarse-grained information rate (NCIR).

A Prototype for a Multimodal Biometric Security system based on Face and Audio Signatures

Any automatically measurable, robust and distinctive physical characteristic or personal trait that can be used to identify an individual or verify the claimed identity of an individual, referred to as biometrics, has gained significant interest in the wake of heightened concerns about security and rapid advancements in networking, communication and mobility. Multimodal biometrics is expected to be ultra-secure and reliable, due to the presence of multiple and independent—verification clues. In this study, a multimodal biometric system utilising audio and facial signatures has been implemented and error analysis has been carried out. A total of one thousand face images and 250 sound tracks of 50 users are used for training the proposed system. To account for the attempts of the unregistered signatures data of 25 new users are tested. The short term spectral features were extracted from the sound data and Vector Quantization was done using K-means algorithm. Face images are identified based on Eigen face approach using Principal Component Analysis. The success rate of multimodal system using speech and face is higher when compared to individual unimodal recognition systems

Evaluation of Auditory Displays Supporting Aircraft Approach and Landing

Abstract: The paper describes an auditory interface using directional sound as a possible support for pilots during approach in an instrument landing scenario. Several ways of producing directional sounds are illustrated. One using speaker pairs and controlling power distribution between speakers is evaluated experimentally. Results show, that power alone is insufficient for positioning single isolated sound events, although discrimination in the horizontal plane performs better than in the vertical. Additional sound parameters to compensate for this are proposed.