Fertility Rates Following Fixed-Time Artificial Insemination in Dairy Heifers in a Practical Progesterone-Based Protocol

Background: In bovines, more efficient management practices are important for maximizing profitability. In order to increase the pregnancy rates in artificial insemination (AI) programs, several hormonal protocols were developed to synchronize the follicular wave and the moment of ovulation in beef and dairy cattle. In dairy cattle, detection of estrus can be difficult due to a number of factors including the incidence of silent estrus. Hormonal treatments designed to control both luteal and follicular function has permitting efficient synchronizations of time of ovulation. Thus, the AI can be performed in a large number of animals on a fixed schedule without the need for detection of estrus. Using these management techniques, the fixed-time artificial insemination (TAI) can overcome the problem of accurate estrus detection and help in reducing the incidence of repeat breeding. In addition, with TAI in cattle operations, it is possible to facilitate management practices and commercialization, and to reduce the time and semen wasting with animals inseminated at incorrect times. The investigation of practical and efficient TAI protocols is important for reducing the labor and animal handling of TAI in dairy cattle, as well as for increasing the profitability of the cattle management system. This study was carried out in order to investigate the effectiveness of TAI in dairy heifers treated with a practical progesterone-based protocol.Materials, Methods & Results: This experiment was conducted at the university farm located in southwestern Brazil, during May 2009. Thirty-nine cycling crossbred dairy heifers were employed in this study. All animals received a single intramuscular injection of estradiol benzoate and intravaginal progesterone releasing device in a random stage of the estrous cycle (Day 0). on day 7 the animals were treated with PGF2a analogue and on day 9 the device was removed. Forty-eight hours after the device removal (day 11) a synthetic analogue of GnRH was administered and the animals were fixed-time artificially inseminated at the time of GnRH injection. The inseminations were performed using four different batches from the same Holstein bull. Among the heifers that were synchronized (87.2%), 30.8% ovulated until 24 h after TAI and 56.4% ovulated between 24 and 32 h after TAI. The conception rate was 61.5%. No effects of ovulation time in conception rates were detected. The conception rate from heifers that ovulated until 24 h after TAI was 58.3% and from heifers that ovulated between 24 and 32 h after TAI was 77.3%. The mean of ovulatory follicle in heifers that ovulated until 24 h was 14.3 mm and in heifers that ovulated between 24 and 32 h was 11.9 mm.Discussion: Taking together, the findings of the present study, along with those of others, emphasize the concept that development of practical methods for TAI offers significant advantages to dairy producers if conception rates are close or greater to those obtained after breeding at detected estrus. Thus, the results of the present study reinforce the possibility of making dairy cattle production more cost-effective using TAI. In conclusion, with the progesterone-based TAI protocol of the present experiment all synchronized animals ovulated up to 32 h after GnRH+TAI and no effects of ovulation time related to conception rate was detected. The exogenous control of luteal and follicular development facilitated the reproductive management and animal handling. Also, inseminating the heifers at the moment of GnRH injection in a progesterone-based TAI protocol is a practical strategy and provided satisfactory results regarding ovulation and conception rates in dairy heifers.

Educação inclusiva: práticas de professores frente à deficiência intelectual

The present work is a survey of pedagogical practices of teachers who experience the daily school with students with Intellectual Disability (ID) in their classrooms, considered inclusive. The study was conducted in academic year 2010 in a municipal school in Natal-RN, aimed at investigating the pedagogical practices developed by the participating teachers as well as its view of the front of Intellectual Disabilities students who are inserted in the initial years of Elementary School. In methodological choice, considering the nature of the phenomenon, we chose the qualitative approach and the case study method. The observation and semi-structured interview were used as procedures, which contributed to a significant collection of data in an attempt to answer the objectives. The study subjects were selected by convenience and were formed into two teachers from Elementary School I, linked to the public educational system, which volunteered to collaborate in this research. The analysis of the observations and of the speeches made possible build pedagogical considerations on the action with students with Intellectual Disabilities in a regular school. The results point to a practice covered with a traditional pedagogy, with a few adjustments, although there is an initial process of change, what we observe in the classroom and captured in the words, because, at various times, we saw an interest in developing a pedagogy of Freire. One aspect that caught our attention refers to the formative action at school for these teachers. We found its incipiency, because this does not happen in a systematic way at school. Throughout the years investigated, the teachers had no access to any form of training neither to any form of specialized monitoring. We realize that there is still a concept of Intellectual Disability that makes difficult to "see" this student as a human being having learning opportunities. The aspects that interfere in the formation hinder the development of a pedagogical practice that meets the uniqueness of its customers and promotes a truly effective school inclusion, consistent with social rights proclaimed in this century. We believe in the irreversibility of the inclusive process initiated a few decades ago and that obstacles to the practice of teaching students with ID are visible and possible to overcome if they are turned into challenges for all those who compose the school, the municipal education system and those who build public policies for inclusive education

O PROEJA ensino médio no ifrn, campus Caicó: causas da desistência e motivos da permanência

This dissertation deals about the theme of National Integration Program of the Professional Education to the Basic Education in the form of Youth and Adults Education - PROEJA, which was developed at the Federal Institute of Education Science and Technology of Rio Grande do Norte - IFRN - Campus Caicó. It aims to analyze the causes of the abandonment and the reasons for the permanence of students within the mentioned program. To substantiate this research, we used methodologically, some procedures such as bibliographical research, documentary analysis, semi-structured interviews and focus group. To analyze the data, we discussed the contradiction that involves duality and educational compensation based in the struggles and achievements of rights at the core of public policies for high schools, for vocational education and the education of youth and adults in the 2000s. We analyze the integrated high school under PROEJA, having as reference the conception of the total human formation; the inseparability of the primary education system and vocational education and the integration of knowledge and expertise as a whole, discussing the specificities of the modality EJA, discussing the causes of abandonment and the reasons for the permanence of the students of education for youth and adults (EJA) in the primary education system. As for the results, we found that although the PROEJA be a program that aims to provide a complete human formation to contribute to the full citizenship of their graduate members, what is announced in the document that guides its creation has not been materialized in Caicó Campus. The curriculum of the course was not designed for the students of EJA, nor teachers have had an adequate training to work with these specific individuals, and its specificities of being workers with differentiated learning times have not been considered. In addition, the courses are predominantly of instrumentalist characteristics. This indicates that the material and institutional conditions to achieve the promised total and complete training have not being fully materialized at the researched school. Associated with the difficulties concerning the intra-school and extra-school conditions, personal and socioeconomic conditions which are related to the obligation to work that implies in limitations to balance work, school and family, they influenced in the interruption of the school trajectory of these subjects. Through research, we confirmed that the motives of students who remain have to do also with intraescolares conditions the quality of education (qualification of technical staff and teachers) involved in the educational process, as well as socioeconomic and personal issues represented by the support of colleagues and family.Then it is concluded that the causes of abandonment and the reasons of the permanence are of institutional, socioeconomic and personal origins. Finally, it is observed that capitalist society demands as much as possible high levels of educated workers, and at the same time makes difficult the access to that education for much of the population, and it is not randomly. The objects of that exclusion are the popular worker classes and their children

Viabilidade da Utilização de Máquinas de Indução Convencionais como Motores sem Mancais Mecânicos

Electrical Motors transform electrical energy into mechanic energy in a relatively easy way. In some specific applications, there is a need for electrical motors to function with noncontaminated fluids, in high speed systems, under inhospitable conditions, or yet, in local of difficult access and considerable depth. In these cases, the motors with mechanical bearings are not adequate as their wear give rise to maintenance. A possible solution for these problems stems from two different alternatives: motors with magnetic bearings, that increase the length of the machine (not convenient), and the bearingless motors that aggregate compactness. Induction motors have been used more and more in research, as they confer more robustness to bearingless motors compared to other types of machines building with others motors. The research that has already been carried out with bearingless induction motors utilized prototypes that had their structures of stator/rotor modified, that differ most of the times from the conventional induction motors. The goal of this work is to study the viability of the use of conventional induction Motors for the beringless motors applications, pointing out the types of Motors of this category that can be more useful. The study uses the Finite Elements Method (FEM). As a means of validation, a conventional induction motor with squirrel-cage rotor was successfully used for the beringless motor application of the divided winding type, confirming the proposed thesis. The controlling system was implemented in a Digital Signal Processor (DSP)

Método não destrutivo de estimativa da área foliar de plantas daninhas de ambiente aquático: tanner-grass e capim-fino

The continuous inputs from agriculture areas and human or industrial sewer have been provided a widely demographic explosion of tropical tanner-grass and para grasss plants in the rivers and water reservoirs of Brazil. Considering the importance of these noxious weeds there is a vast necessity of basic studies on aspects related to reproduction, growing, development, nutritional requirements, responses to control systems and others. In most studies, leaf area knowledge is crucial and it is one of the most difficult characteristics to be measured because it usually requires expensive equipments or it uses a destructive technique. The objective of this work was to develop equations for leaf blade dimensional parameters to allow determination of the leaf area of African tanner-grass (Brachiaria subquadripara (Trin.) Hitchc) and para grass (Brachiaria mutica (Forsk.) Stapf.). Correlations between real leaf area and dimensional parameters of leaf blade such as length along the main vein (L) and maximum width (W) perpendicular to the main axis were studied. Only the linear equations allowed a good leaf area estimate. It is suggested to opt for a simple linear equation involving respective products of length times maximum width considering linear coefficient equal to zero. Thus, B. subquadripara (SS) and B. mutica (SM) non destructive leaf blade area estimates may be performed by the following formulas: SS = 0.7719 (L x W) and SM = 0.7479 (L x W), with coefficients of determination (R(2)) of 0.9594 and 0.9408, respectively.

Stochastic stability for Markovian jump linear systems associated with a finite number of jump times

This paper deals with a stochastic stability concept for discrete-time Markovian jump linear systems. The random jump parameter is associated to changes between the system operation modes due to failures or repairs, which can be well described by an underlying finite-state Markov chain. In the model studied, a fixed number of failures or repairs is allowed, after which, the system is brought to a halt for maintenance or for replacement. The usual concepts of stochastic stability are related to pure infinite horizon problems, and are not appropriate in this scenario. A new stability concept is introduced, named stochastic tau-stability that is tailored to the present setting. Necessary and sufficient conditions to ensure the stochastic tau-stability are provided, and the almost sure stability concept associated with this class of processes is also addressed. The paper also develops equivalences among second order concepts that parallels the results for infinite horizon problems. (C) 2003 Elsevier B.V. All rights reserved.

Comparative in vitro study of the inhibition of human and hen esterases by methamidophos enantiomers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of the dimensions of double-torsion test specimens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O médico diante da morte na urgência e emergência:reflexões sobre o ser médico

The literature pointed that the way which people deal with death have been changing along centuries, and nowadays what is realized it is that, each time more, the human being have difficulties to deal with death. Due to the fact that the main function of the physician is to save their patients lives; responsibility that is aggravated by the necessity of to take decisions quickly, once he need to deal with the unexpected situations of the urgency and emergency, many times these professional have to face of impotency and fail situations, when he lose a patient. The main goal of this study was to understand the experience of physicians that work in the urgency and emergency, in front of death. These questioning it justified by the fact of the physicians do not have, many times, a space to express their suffering and anguish about the issues related to death in their work routine, despite lifedeath question to be often present their everyday. It is still possible to verify in the literature, an appointment of the necessity of to include in the curriculum of Medicine courses, subjects that approach such questions. The method used was based on the existential-phenomenological perspective, using as instrument the participant observation, to the intent of understand the routine in the urgency and emergency context, and semi-structured interview. It was interviewed six physicians that work in the urgency and emergency of the most important hospital of public health system of Natal-RN. The results showed that the physicians reported pleasure in work in the urgency and emergency, despite of they presented stress and the difficulties that they deal with in the public system. Despite of the fact that the death to be considered as a phenomenon that make part of the physician s routine, sometimes, deals with these one is more difficult. Many times losses generate an impotency and guilty feeling, as well as questionings about their performance during the attempts to save lives. We verified, from this study, the importance of the existence of some kind of intervention in the emergency, in order to the physicians can elaborate the questions about death and die emerged in their work. We consider yet that this study corroborates and reiterates the discussions concerning the importance of this thematic to be approached in a more effective way, during the academic formation of these professionals, as well as, the importance of a larger investment from the part of Government in the urgency and emergency sector, in order to propitiate to these professionals a work that brings less harmful for their health

Cuidados paliativos e ser-para-morte: reflexões sobre um atendimento psicológico

Death is a theme that fascinates, though at the same time, frightens and uneasy the human being, despite the finitude being present at our daily lives. In each historical time, death has been represented in a peculiar way, from familiar death (at Middle Ages), to interdicted death (at contemporary times). Through this path it‟s possible to recognize several attitudes and stages front of death and the process of dying as possibilities of coping and the understanding of these occurrences. In other hand, the palliative care proposal came as a humanized attention, front of the human finitude, recognizing death as a part of the vital cycle. The Brazilian reality, in this context, still faces a lot of political, economic and social barriers that makes difficult the consolidation of palliative care at the death process in the Brazilian Health Care policies. Currently, according to the Brazilian Palliative Care Association, Brazil presents an average of 40 services with this proposal. Such data portray our inexpressive condition in relation to these cares when considering the territorial extension and population of our country. Considering this scenario is relevant think about death and the process of dying at contemporary times, at a health context in which palliative care, when trying to humanize the process of dying, bring to light the issue of human finitude and the beingtowards- death, as thought by the philosopher Martin Heidegger. According to him, the human being (Dasein) is constituted as a being-towards-death, once death is its most own potentiality-for-bein and its last possibility to be lived. In view of the ideas presented, the proposed study appears as a qualitative research of existential-phenomenological inspiration and aims to understand the experience of being-toward-death from the psychological care to a person out of possibilities of cure living on palliative cares. The psychological care happened at the patient‟s home, understanding the clinical process of being-with-the-other from the written reports of the psychology/researcher, by the accompanying sessions, configured as an experience report. These reports are focused on the experiences lived by the patient, as well as apprehended by the psychologist at the intersubjectivity relation and its own experience with Dasein and, therefore, being-toward-death. The reports were hermeneutically interpreted, from the senses that emerged in this process, considering the notion of being-toward-death proposed by Heidegger. Furthermore, it was important to dialogue with other authors that approached the studied theme. It is perceived, through brief and meaningful reflections about the clinical treatments started, that the experience of illness with no possibilities of cure makes the Dasein revises feelings and experiences that were marked at the temporality and historicity of existence. It is a stage of life in which the cultural dimension and the common sense of finitude, often gains ground in the human condition, taken in its ordinary sense, unlike the way it has been thought from an ontological and existential perspective of death. Thus, there are singulars and revealing paths in the palliative care scenery as possible ways for authenticity of being-toward-death

Application times, sources and doses of nitrogen on wheat cultivars under no till in the Cerrado region

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Stroke in ancient times - a reinterpretation of Psalms 137 : 5,6

Stroke was probably first described in Psalms 136: 5-6 of the Catholic Bible, and Psalms 137:5-6 of the Evangelical Bible. Based on the Portuguese, Spanish, English, German, Dutch, Russian, Greek, and original Hebrew Bible, the significance of this Psalm is the invocation of a punishment, of which the final result would be a stroke of the left middle cerebral artery, causing motor aphasia and right hemiparesis.

EFFECT of ULTRASONIC EXCITATION on THE MICROTENSILE BOND STRENGTH of GLASS IONOMER CEMENTS TO DENTIN AFTER DIFFERENT WATER STORAGE TIMES

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of alternative photostimulable phosphor plates erasing times on subjective digital image quality

Objective: To evaluate the influence of alternative erasing times of DenOptix (R) (Dentsply/Gendex, Chicargo, IL) digital plates oil subjective image quality and the probability of double exposure image not Occurring.Methods: Human teeth were X-rayed with phosphor plates using tell different erasing times. Two observers evaluated the images for subjective Image quality (sharpness, brightness, contrast, enamel definition, dentin definition and dentin-enamal Junction definition) and for the presence or absence of double exposure image. Spearman's correlation analysis and ANOVA was performed to verify the existence ora linear association between the subjective image quality parameters and the alternative erasing times. A contingency table was constructed to evaluate the agreement among the observers, and a binominal logistic regression was performed to verify the correlation between the erasing time and the probability of double exposure image not occurring.Results: All 6 parameters or image quality were rated high by the examiners for the erasing times between 25 s and 130 s. The same erasing time range, from 25 to 130 s, was considered a safe erasing time interval, with no probability of a double exposure image Occurring.Conclusions: The alternative erasing times from 25 s to 130 s showed high quality and no probability of double image Occurrence. Thus, it is possible to reduce the operating time or the DenOptix (R) digital system Without jeopardizing the diagnostic task.Dentomaxillofacial Radiology (2010) 39, 23-27. doi: 10.1259/dmfr/49065239.

Flexural strength and hardness of reline and denture base acrylic resins after different exposure times of microwave disinfection

Objectives: To evaluate the effect of microwave disinfection on the flexural strength and Vickers hardness of 4 autopolymerized resins (Kooliner [K], Tokuso Rebase Fast [T], Ufi Gel Hard [U], and New Truliner [N]) and 1 denture base resin (Lucitone 550 [L]). Method and Materials: For each material, 48 specimens (64 x 10 x 3.3 mm) were made and divided into 6 equal groups (n = 8). In the control group, specimens were untreated. Before testing, specimens were immersed in 200 mL of distilled water and submitted to disinfection for 1 of the following irradiation times: 1, 2, 3, 4, or 5 minutes. The irradiation procedure was performed twice. The flexural strength was determined using a testing machine MTS-810 and measurements of Vickers hardness were made on Micromet 2100. The values were submitted to ANOVA and Tukey's test (P = .05). Results: The K material showed a significant increase (P = .0010) in flexural strength following 5 minutes of disinfection compared to control specimens. The flexural strength mean values of materials T, U, and N were not significantly affected (P > .05) by disinfection. Compared to the control group, the K material showed a significant increase in hardness (P < .001) following disinfection for 3, 4, and 5 minutes. For material U, disinfection for 4 and 5 minutes produced specimens with significantly increased hardness values (P < .001) compared to the control group. For material N, disinfection for 5 minutes resulted in significantly higher hardness values (P < .001) than the control group. Conclusion: Regardless of the irradiation time, the flexural strength and hardness of the materials evaluated were not detrimentally affected by microwave disinfection. (Quintessence Int 2008;39:833-840)