Materialities influencing the design process

The use of material artefacts within the design process is a long-standing and continuing characteristic of interaction design. Established methods, such as prototyping, which have been widely adopted by educators and practitioners, are seeing renewed research interest and being reconsidered in light of the evolving needs of the field. Alongside this, the past decade has seen the introduction and adoption of a diverse range of novel design methods into interaction design, such as cultural probes, technology probes, context mapping, and provotypes.

A New DER coordination in LV network based on the concept of distributed control

Given the paradigm of smart grid as the promising backbone for future network, this paper uses this paradigm to propose a new coordination approach for LV network based on distributed control algorithm. This approach divides the LV network into hierarchical communities where each community is controlled by a control agent. Different level of communication has been proposed for this structure to control the network in different operation modes.

Common DC link in residential LV network to improve the penetration level of Small-Scale Embedded Generators

This paper presents a new approach for network upgrading to improve the penetration level of Small Scale Generators in residential feeders. In this paper, it is proposed that a common DC link can be added to LV network to alleviate the negative impact of increased export power on AC lines, allowing customers to inject their surplus power with no restrictions to the common DC link. In addition, it is shown that the proposed approach can be a pathway from current AC network to future DC network.

Opportunities for forest finance under the International climate change regime

The international climate change regime has the potential to increase revenue available for forest restoration projects in Commonwealth nations. There are three mechanisms which could be used to fund forest projects aimed at forest conservation, forest restoration and sustainable forest management. The first forest funding opportunity arises under the clean development mechanism, a flexibility mechanism of the Kyoto Protocol. The clean development mechanism allows Annex I parties (industrialised nations) to invest in emission reduction activities in non-Annex 1 (developing countries) and the establishment of forest sinks is an eligible clean development mechanism activity. Secondly, parties to the Kyoto Protocol are able to include sustainable forest management activities in their national carbon accounting. The international rules concerning this are called the Land-Use, Land-Use Change and Forestry Guidelines. Thirdly, it is anticipated that at the upcoming Copenhagen negotiations that a Reduced Emissions from Deforestation and Degradation (REDD) instrument will be created. This will provide a direct funding mechanism for those developing countries with tropical forests. Payments made under a REDD arrangement will be based upon the developing country with tropical forest cover agreeing to protect and conserve a designated forest estate. These three funding options available under the international climate change regime demonstrate that there is potential for forest finance within the regime. These opportunities are however hindered by a number of technical and policy barriers which prevent the ability of the regime to significantly increase funding for forest projects. There are two types of carbon markets, compliance carbon markets (Kyoto based) and voluntary carbon markets. Voluntary carbon markets are more flexible then compliance markets and as such offer potential to increase revenue available for sustainable forest projects.

Creating 'saviour siblings' : the notion of harming by conceiving in the context of healthy children

Over the past decade there have been a number of families who have utilised assisted reproductive technologies (ARTs) to create a tissue-matched child, with the purpose of using the child’s tissue to cure an existing sick child. This inevitably brings such families a sense of hope as the ultimate aim is to overcome a family health crisis. However, this specific use of reproductive technologies has been the subject of significant criticism, most of which is levelled against the potential harm to the ‘saviour’ child. In Australia, families seeking to access reproductive technologies in this context are therefore required to justify their motives to an ethics committee in order to establish, amongst other things, whether the child will suffer harm once born. This paper explores the concept of harm in the context of conception, focusing on whether it is possible to ‘harm’ a healthy child who has been conceived to save another. To achieve this, the paper will evaluate the impact of the ‘non-identity’ principle in the ‘saviour sibling’ context, and assess the existing body of literature which addresses ‘harm’ in the context of conception. As will be established, the majority of such literature has focused on ‘wrongful life’ cases which seek to address whether an existing child who has been born with a disability, has been harmed. Finally, this paper will distinguish the harm arguments in the ‘saviour sibling’ context based on the fact that the harm evaluation concerns the ‘future-life’ assessment of a healthy child.

Culture as a driver of entrepreneurship : contrasting independent entrepreneurship versus employee entrepreneurship

Principal Topic Counties in Northern Europe, such as Sweden, Finland and Denmark, have comparatively low per capita rates of entrepreneurship as measured by independent new venture start-up rates – as for example measured by the Global Entrepreneurship Monitor (GEM) Total entrepreneurial activity (TEA) rate. However, the latest 2011 GEM data reveals that these same countries have comparatively very high Employee Entrepreneurship Activity (EEA) rates – that is a high rate per capita of employees involved in new product development or new enterprise activities. This observation has prompted us to investigate the role of national culture in driving independent versus employee entrepreneurial activities. Prior research has established that national (and regional) culture plays an important role in forming an “entrepreneurial culture” that encourages (or discourages) independent business start-ups and TEA (e.g. Davidsson, 1995; Beugelsdijk, 2007). However, the relationship of culture and EEA has not received research attention. Moreover, empirical relationships between elements of national culture and independent entrepreneurship have revealed some surprising results. For example, Wildeman et al. (1999) report an unexpected higher share of individual business ownership in countries that have higher uncertainty avoidance, higher power distance and lower individualism according to Hofstede’s dimensions of culture. They speculate that dissatisfaction can be a source of entrepreneurship: in countries with a high power distance, a high uncertainty avoidance and low individualism, there may be relatively more business owners since enterprising individuals cannot satisfy their needs within existing organizations. Yet it remains a rather open question whether entrepreneurial behaviour in existing organisations provides a satisfactory explanation for these empirical findings. Methods We will conduct a cross sectional study of the influence of national culture according to the five / six dimensions of Hofstede (1980; 2001) on both TEA and EEA for the 54 countries that participated in GEM 2011. Since it is well established that the opportunities for entrepreneurship vary substantially with a country’s level of economic development, we intend to conduct separate analyses for the three categories of development – innovation driven economies, efficient driven economies and factor driven economies. We also intend to restrict our assessment of TEA to opportunity driven entrepreneurship, as necessity driven entrepreneurship has a different relationship to the “entrepreneurial culture” that is the focus of our study. We will control for a range of factors such as GDP growth, ease of doing business index and unemployment. Results and Implications Descriptive analyses of the GEM TEA and EEA data reveal clusters of countries that appear to be have similar national culture. We are yet to conduct regression analyses.

Drying kinetics of two grape varieties of Italy

Two varieties of grapes, white grape and red grape grown in the Campania region of Italy were selected for the study of drying characteristics. Comparisons were made with treated and untreated grapes under constant drying condition of 50o C in a conventional drying system. This temperature was selected to represent farm drying conditions. Grapes were purchased from a local market from the same supplier to maintain the same size of grapes and same properties. An abrasive physical treatment was used as pretreatment. The drying curves were constructed and drying kinetics was calculated using several commonly available models. It was found that treated samples show better drying characteristics than untreated samples. The objective of this study is to obtain drying kinetics which can be used to optimize the drying operations in grape drying.

Drying condition effects on fluidization quality and fluidization velocity at initial and final stages of cubical particulates for pet food

In this research fluidization behavior of cubical Bovine intestine samples was studied. Bovine intestine samples were heat pump dried at atmospheric pressure and at emperatures below and above the material freezing points. Experiments were conducted to study fluidization characteristics and drying kinetics at different drying conditions. Bovine particles were characterized according to Geldart classification and minimum fluidization velocity was calculated using Ergun Equation and generalized equation for all drying conditions at the beginning of the trials and end of the trials. Walli’s model was used to categorize stability of the fluidization at the beginning and end of the drying for each trial. Walli’s values determined were positive at the beginning and end of all trials indicating stable fluidisation at the beginning and end for each drying condition.

Influence of drying conditions on the moisture diffusion during single stage and two stage fluidized bed drying of bovine intestine for pet food

Bovine intestine samples were heat pump fluidized bed dried at atmospheric pressure and at temperatures below and above the material freezing points equipped with a continuous monitoring system. The investigation of the drying characteristics has been conducted in the temperature range -10~25oC and the airflow in the range 1.5~2.5 m/s. Some experiments were conducted as a single temperature drying experiments and others as two stage drying experiments employing two temperatures. An Arrhenius-type equation was used to interpret the influence of the drying air parameters on the effective diffusivity, calculated with the method of slopes in terms of energy activation, and this was found to be sensitivity of the temperature. The effective diffusion coefficient of moisture transfer was determined by Fickian method using uni-dimensional moisture movement in both moisture, removal by evaporation and combined sublimation and evaporation. Correlations expressing the effective moisture diffusivity and drying temperature are reported.

Making space and place for knowledge communities : lessons for Australian practice

This paper aims to shed light on the planning and development processes of the knowledge-based urban development phenomenon, with respect to the construction of knowledge community precincts. We undertake policy and best practice analyses to learn from the planning and development processes of internationally renowned knowledge community precincts—from Copenhagen, Eindhoven and Singapore. In the light of this, we scrutinise major Australian knowledge community precinct initiatives—from Sydney, Melbourne and Brisbane—to better understand the dynamics of national practices, and benchmark them against the international best practice cases. The paper concludes with a discussion on the study findings and successfully establishing space and place for both knowledge economy and society in Australian cities.

A discourse on the non-method

In spite of the activism of professional bodies and researchers, empirical evidence shows that project management still does not deliver the expected benefits and promises. Hence, many have questioned the validity of the hegemonic rationalist paradigm anchored in the Enlightenment and Natural Sciences tradition supporting project management research and practice for the last 60 years and the lack of relevance to practice of the current conceptual base of project management. In order to address these limitations many authors, taking a post-modernist stance in social sciences, build on ‘pre-modern’ philosophies such as the Aristotelian one, specially emphasizing the role of praxis (activity), and phronesis (practical wisdom, prudence). Indeed, ‘Praxis … is the central category of the philosophy which is not merely an interpretation of the world, but is also a guide to its transformation …’ (Vazquez, 1977:. 149). Therefore, praxis offers an important focus for practitioners and researchers in social sciences, one in which theory is integrated with practice at the point of intervention. Simply stated, praxis can serve as a common ground for those interested in basic and applied research by providing knowledge of the reality in which action, informed by theory, takes place. Consequently, I suggest a ‘praxeological’ style of reasoning (praxeology being defined as study or science of human actions and conduct, including praxis, practices and phronesis) and to go beyond the ‘Theory-Practice’ divide. Moreover, I argue that we need to move away from the current dichotomy between the two classes ‘scholars experts-researchers’ and ‘managers/workers-practitioners-participants’. Considering one single class of ‘PraXitioner’, becoming a phronimos, may contribute to create new perspectives and open up new ways of thinking and acting in project situations. Thus, I call for a Perestroika in researching and acting in project management situations. My intent is to suggest a balanced praxeological view of the apparent opposition between social and natural science approaches. I explore, in this chapter, three key questions, covering the ontological, epistemological and praxeological dimensions of project management in action. 1. Are the research approaches being currently used appropriate for generating contributions that matter to both theory and practice with regards to what a ‘project’ is or to what we do when we call a specific situation ‘a project’? 2. On the basis of which intellectual virtues is the knowledge generated and what is the impact for theory and practice? 3. Are the modes of action of the practitioners ‘prudent’ and are they differentiating or reconciling formal and abstract rationality from substantive rationality and situated reasoning with regards to the mode of action they adopt in particular project situations? The investigation of the above questions leads me to debate about ‘Project Management-as-Praxis’, and to suggest ‘A’ (not ‘THE’) ‘praxeological’ style of reasoning and mode of inquiry – acknowledging a non-paradigmatic, subjective and kaleidoscopic perspective – for ‘Knowing-as-Practicing’ in project management. In short, this is about making a ‘Projects Science’ that matters.

Patient Safety Law: From Silos to Systems

Patient safety has become a significant and pressing policy issue. Around the world, governments, the health care sector and the public are increasingly cognizant of the need to improve the safety of care delivered by their health systems. Pressure for change has been created by highly publicized incidents in a number of countries involving unsafe acts that were significant both in scale and consequence and a number of empirical studies that revealed the high rates of unsafe acts and their consequences. The costs of unsafe health care – both personal and fiscal – to individuals, their families and their communities and to the state are massive. In this research project we explored one particular avenue for change – that is, the use of legal instruments by governments to improve patient safety. We did this through a comparative review of the use of legal instruments or frameworks in other countries (specifically Australia, Denmark, New Zealand, the United Kingdom, and the United States) as well as two non-health care related sectors in Canada (transportation and occupational health and safety). We began this research by reviewing the legal instruments and undertaking extensive literature reviews. Further information was gathered through in-person interviews with policy-makers and academics in the countries studied, and from policy-makers and academics expert in the health, occupational health and safety, and transportation sectors in Canada. Once descriptions of the various countries and sectors were drafted, we held small-group meetings with local experts on particular aspects of patient safety. We then hosted a national consultation meeting. We subsequently drafted this final report and the appendices, which fully describe the results of the background research. Finally, we prepared a summary version of the report as well as posters and papers to be published and delivered at conferences and meetings with relevant groups.

The role of HRM practices in building intellectual capital in knowledge-based teams

In this paper, we investigate the ways HRM systems support development of intellectual capital in teams in three case studies of knowledge-intensive firms (KIFs) in Denmark. By focusing on team composition and structure, findings build on the rapidly growing body of literature on HRM’s role in supporting intellectual capital development. Specifically, we make a theoretical contribution to this literature by identifying three distinct ways KIFs develop intellectual capital: 1) through HRM development systems that build relationship-centric team-based intellectual capital by targeting development of social capital; 2) through HRM employee relations systems that build human-centric team based intellectual capital by targeting human capital; 3) through a balanced approach to HRM that builds polycentric team-based intellectual capital through focusing on all aspects of intellectual capital. The findings also have managerial implications regarding the need to align team composition and structure, HRM systems, and intellectual capital focus to support development of team-based intellectual capital.

A flexible protection scheme for an islanded Multi-Microgrid

Multi-Microgrids (MMGs) have been proposed to connect distributed generators (DG), microgrids (MG), and medium-voltage (MV) loads with the distribution system. A flexible protection scheme that enables an islanded MMG to continue operation during fault conditions is yet to be developed. In this paper, a protection scheme for an islanded MMG that utilises MG controllers and communication links is proposed. The MMG model used includes two MGs connected to the distribution system. Each MG consists of diesel, wind, and photovoltaic (PV) microsources. The effectiveness of the proposed protection scheme is evaluated by simulation.

An improved protection strategy for microgrids

Microgrids (MG) enable the integration of low capacity renewable energy resources with distribution systems. A recently proposed protection scheme for MGs utilising undervoltage, High Impedance Fault (HIF) detection, directional protection modules, and communication links significantly reduces the fault clearing time compared to previous schemes. In this paper, the effect of replacing undervoltage protection with differential protection in a scheme that also contains HIF and directional protection modules is studied. The MG model used in this study includes a diesel, wind, and two photovoltaic (PV) microsources. The alternative protection schemes are evaluated by simulation. It is found that the protection scheme consisting of differential, HIF detection, and directional protection modules is more effective compared to the alternative in protecting the MG from some fault conditions such as the phase-A-to-ground, phase-B-to-C, and phase-B-to-C-to-ground.