Optimisation of the glycerol-to-ornithine molar ratio in the feed medium for the continuous production of clavulanic acid by Streptomyces clavuligerus

Amino acids are well metabolized by Streptomyces clavuligerus during the production of clavulanic acid using glycerol as main carbon and energy source. However, only a few amino acids such as arginine and ornithine are favorable for CA biosynthesis. The aim of this work was to optimize the glycerol:ornithine molar ratio in the feed medium containing only these compounds to maximize CA production in continuous cultivation. A minimum number of experiments were performed by means of a simple two-level full-factorial central composite design to investigate the combined effect of glycerol and ornithine feeding on the CA concentration during the intermittent and continuous process in shake-flasks. Statistical analysis of the experimental data using the response surface methodology showed that a glycerol-to-ornithine molar ratio of approximately 40:1 in the feed medium resulted in the highest CA concentration when fermentation was stopped. Under these optimized conditions, in bench-scale fermentor runs, the CA concentration reached more than double the concentration obtained in shake-flasks runs. (C) 2009 Elsevier B.V. All rights reserved.

Austenite decomposition of C-Mn steel containing boron by continuous cooling

The austenite decomposition in C-Mn steel containing boron was studied by continuous cooling from 1100 and 845 degreesC using the Jominy test. The results indicate that the different cooling speeds and the presence of boron refine and change the percentage of ferrite microstructure, martensite, and fine pearlite. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Electrochemical, Spectrophotometric and Liquid-Chromatographic Approaches for Analysis of Tropical Disease Drugs

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

High-Performance Liquid Chromatographic Quantification of Flavonoids in Eriocaulaceae Species and Their Antimicrobial Activity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Purification of an antibacterial compound from Lantana lilacina

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Multivariate calibrations in gas chromatographic profiles for prediction of several physicochemical parameters of Brazilian commercial gasoline

Several Brazilian commercial gasoline physicochemical parameters, such as relative density, distillation curve (temperatures related to 10%, 50% and 90% of distilled volume, final boiling point and residue), octane numbers (motor and research octane number and anti-knock index), hydrocarbon compositions (olefins, aromatics and saturates) and anhydrous ethanol and benzene content was predicted from chromatographic profiles obtained by flame ionization detection (GC-FID) and using partial least square regression (PLS). GC-FID is a technique intensively used for fuel quality control due to its convenience, speed, accuracy and simplicity and its profiles are much easier to interpret and understand than results produced by other techniques. Another advantage is that it permits association with multivariate methods of analysis, such as PLS. The chromatogram profiles were recorded and used to deploy PLS models for each property. The standard error of prediction (SEP) has been the main parameter considered to select the "best model". Most of GC-FID-PLS results, when compared to those obtained by the Brazilian Government Petroleum, Natural Gas and Biofuels Agency - ANP Regulation 309 specification methods, were very good. In general, all PLS models developed in these work provide unbiased predictions with lows standard error of prediction and percentage average relative error (below 11.5 and 5.0, respectively). (C) 2007 Elsevier B.V. All rights reserved.

Development, optimization and validation of gas chromatographic fingerprinting of Brazilian commercial gasoline for quality control

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Development, Optimization and Validation of Gas Chromatographic Fingerprinting of Brazilian Commercial Diesel Fuel for Quality Control

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Isotopic fractionation and trophic position of zooplankton species in the Upper Paraná River floodplain

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Identification of Mycobacteria by Thin Layer Chromatographic Analysis of Mycolic Acids and Conventional Biochemical Method: Four Years of Experience

Mycolic acids analysis by thin-layer chromatography (TLC) has been employed by several laboratories worldwide as a method for fast identification of mycobacteria. This method was introduced in Brazil by our laboratory in 1992 as a routine identification technique. Up to the present, 861 strains isolated were identified by mycolic acids TLC and by standard biochemical tests; 61% out of these strains came as clinical samples, 4% isolated from frogs and 35% as environmental samples. Mycobacterium tuberculosis strains identified by classical methods were confirmed by their mycolic acids contents (I, III and IV). The method allowed earlier differentiation of M. avium complex - MAC (mycolic acids I, IV and VI) from M. simiae (acids I, II and IV), both with similar biochemical properties. The method also permitted to distinguish M. fortuitum (acids I and V) from M. chelonae (acids I and II) , and to detect mixed mycobacterial infections cases as M. tuberculosis with MAC and M. fortuitum with MAC. Concluding, four years experience shows that mycolic acids TLC is an easy, reliable, fast and inexpensive method, an important tool to put together conventional mycobacteria identification methods.

Myocardial protection by continuous, blood, antegrade-retrograde cardioplegia in rabbits

OBJETIVO: Estudar a eficácia e a segurança da cardioplegia sanguínea, aterógrada-retrógrada contínua, por meio da avaliação da função ventricular. MÉTODOS: Os coelhos foram divididos em quatro grupos: Controle-C(n=10); isquêmico e cardioplegia cristaloide-IC(n=10; isquêmico e cardioplegia sanguínea-IB(n=10; isquêmico sem cardioplegia-INC(n=10. Após o período isquêmico do protocolo a função ventricular foi analisada pela técnica do balão intra-ventricular. RESULTADOS: a pressão desenvolvida intra-ventricular (IVDP) foi: C(92,90± 6,86mmHg); IC(77,78± 6,15mmHg); IB(93,64 ±5,09mmHg); INC(39,46 ±8,91mmHg) p<0,005. a primeira derivada temporal da pressão ventricular na sua deflexão positiva: C(1137,50± 92,23mmHg/sec); IC(1130,62 ±43,78mmHg/sec); IB(1187,58± 88,38mmHg/sec); INC(620,02± 43,80mmHg/se) p<0,005. A primeira derivada da pressão ventricular na sua deflexão negativa: C(770,00± 73,41mmHg/sec); IC(610,03 ±47,43mmg/sec); IB(762,53 ±46,02mmHg/sec); INC(412,35 ±84,36mmHg/sec) p<0,005. A relação do coeficiente angular logarítmico foi: C(0,108± 0,02); IC(0,159± 0,038); IB(0,114 ±0,016); INC(0,175± 0,038) p<0,05. CONCLUSÃO: No modelo experimental estudado o grupo isquêmico protegido pela cardioplegia sanguínea apresentou melhor função ventricular que os grupos protegidos por cardioplegia cristalóide e não protegido.

Continuous infusion in adult females dogs submitted to ovariohysterectomy with midazolam-xylazine and/or medetomidine pre-treated with methotrimeprazine and buprenorphine

OBJETIVO: Comparar através de infusão contínua de xilazina ou medetomidina associada à metotrimeprazina e buprenorfina, cetamina e midazolam, o grau de hipnose, miorrelaxamento e qualidade anestésica e a viabilidade cirúrgica, avaliando eventuais alterações paramétricas e qualidade de recuperação. MÉTODOS: Foram utilizados 20 cães fêmeas, adultas, hígidas (3 a 5 anos de idade) com peso corporal entre 7 e 15 quilos, escolhidas e distribuídas aleatoriamente de forma homogênea em 2 grupos de 10 animais cada, (n=10) sendo estes designados por Grupo 1 (G1), e Grupo 2 (G 2). em G1, os animais foram submetidos a um pré-tratamento com metotrimeprazina na dose de 1,0 mg/kg e buprenorfina na dose de 0,003mg/kg ou 3 µg/kg intravenoso. Decorridos 15 minutos, administrou-se cetamina na dose de 5,0 mg/kg e midazolam na dose de 0,2 mg/kg intravenoso. Imediatamente após a indução iniciou-se administração contínua, por um período de 30 minutos, da associação anestésica de midazolam 0,4 mg/kg/h, cetamina 20mg/kg/h e xilazina 1,0 mg/kg/h IV. em G 2 utilizou-se a mesma técnica empregada em G1 substituindo-se, a xilazina pela medetomidina na dose de 30µg/kg/h. RESULTADOS: Verificou-se em G1 bloqueio átrio-ventricular de primeiro e segundo grau, período de recuperação mais longo além de menor qualidade. em G 2 observou-se bloqueio átrio-ventricular de primeiro grau isolado e de ação fugaz. CONCLUSÕES: Ao se aplicar o método de infusão contínua, além da redução dos fármacos aplicados, evitaram-se efeitos colaterais permitindo uma recuperação mais tranqüila e isenta de excitações, ambos os protocolos permitiram a realização do ato cirúrgico (ovário-salpingo-histerectomia), causando uma redução da hipnose e um miorrelaxamento acentuado. A xilazina e a medetomidina apresentam um comportamento farmacodinâmico semelhante, porém com aspectos clínicos diferentes, as alterações eletrocardiográficas observadas em G 2 e em menor grau em G1 devem ser melhor estudadas.

Interpolating EFGM for computing continuous and discontinuous electromagnetic fields

Purpose - This paper proposes an interpolating approach of the element-free Galerkin method (EFGM) coupled with a modified truncation scheme for solving Poisson's boundary value problems in domains involving material non-homogeneities. The suitability and efficiency of the proposed implementation are evaluated for a given set of test cases of electrostatic field in domains involving different material interfaces.Design/methodology/approach - the authors combined an interpolating approximation with a modified domain truncation scheme, which avoids additional techniques for enforcing the Dirichlet boundary conditions and for dealing with material interfaces usually employed in meshfree formulations.Findings - the local electric potential and field distributions were correctly described as well as the global quantities like the total potency and resistance. Since, the treatment of the material interfaces becomes practically the same for both the finite element method (FEM) and the proposed EFGM, FEM-oriented programs can, thus, be easily extended to provide EFGM approximations.Research limitations/implications - the robustness of the proposed formulation became evident from the error analyses of the local and global variables, including in the case of high-material discontinuity.Practical implications - the proposed approach has shown to be as robust as linear FEM. Thus, it becomes an attractive alternative, also because it avoids the use of additional techniques to deal with boundary/interface conditions commonly employed in meshfree formulations.Originality/value - This paper reintroduces the domain truncation in the EFGM context, but by using a set of interpolating shape functions the authors avoided the use of Lagrange multipliers as well Mathematics in Engineering high-material discontinuity.

Continuous pasteurization of egg yolk: Thermophysical properties and process simulation

This article presents empirical correlations to predict the density, specific heat, thermal conductivity and rheological power-law parameters of liquid egg yolk over a temperature range compatible with its industrial thermal processing (0-61 C). Moreover, a mathematical model for a pasteurizer that takes into account the spatial variation of the overall heat transfer coefficient throughout the plate heat exchanger is presented, as are two of its simplified forms. The obtained correlations of thermophysical properties are applied for the simulation of the egg yolk pasteurization, and the obtained temperature profiles are used for evaluating the extent of thermal inactivation. A detailed simulation example shows that there is a considerable deviation between the designed level of heat treatment and that this is predicted through process simulation. It is shown that a reliable mathematical model, combined with specialized thermophysical property correlations, provide a more accurate design of the pasteurization equipment that ensures effective inactivation, while preserving nutritional and sensorial characteristics.

Morphofunctional changes in Leydig cells throughout the continuous spermatogenesis of the freshwater teleost fish, Serrasalmus spilopleura (Characiformes, Characidae): an ultrastructural and enzyme study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)