956 resultados para Computer Modelling, Interstitial Fluid Flow, Transport Mechanism, Functional Adaptation
Resumo:
This work presents numerical simulations of two fluid flow problems involving moving free surfaces: the impacting drop and fluid jet buckling. The viscoelastic model used in these simulations is the eXtended Pom-Pom (XPP) model. To validate the code, numerical predictions of the drop impact problem for Newtonian and Oldroyd-B fluids are presented and compared with other methods. In particular, a benchmark on numerical simulations for a XPP drop impacting on a rigid plate is performed for a wide range of the relevant parameters. Finally, to provide an additional application of free surface flows of XPP fluids, the viscous jet buckling problem is simulated and discussed. (C) 2011 Elsevier B.V. All rights reserved.
Resumo:
The objective of this work is to predict the temperature distribution of partially submersed umbilical cables under different operating and environmental conditions. The commercial code Fluent (R) was used to simulate the heat transfer and the air fluid flow of part of a vertical umbilical cable near the air-water interface. A free-convective three-dimensional turbulent flow in open-ended vertical annuli was solved. The influence of parameters such as the heat dissipating rate, wind velocity, air temperature and solar radiation was analyzed. The influence of the presence of a radiation shield consisting of a partially submersed cylindrical steel tube was also considered. The air flow and the buoyancy-driven convective heat transfer in the annular region between the steel tube and the umbilical cable were calculated using the standard k-epsilon turbulence model. The radiative heat transfer between the umbilical external surface and the radiation shield was calculated using the Discrete Ordinates model. The results indicate that the influence of a hot environment and intense solar radiation may affect the umbilical cable performance in its dry portion.
Resumo:
This work presents major results from a novel dynamic model intended to deterministically represent the complex relation between HIV-1 and the human immune system. The novel structure of the model extends previous work by representing different host anatomic compartments under a more in-depth cellular and molecular immunological phenomenology. Recently identified mechanisms related to HIV-1 infection as well as other well known relevant mechanisms typically ignored in mathematical models of HIV-1 pathogenesis and immunology, such as cell-cell transmission, are also addressed. (C) 2011 Elsevier Ltd. All rights reserved.
Resumo:
This paper deals with the numerical analysis of saturated porous media, taking into account the damage phenomena on the solid skeleton. The porous media is taken into poro-elastic framework, in full-saturated condition, based on Biot's Theory. A scalar damage model is assumed for this analysis. An implicit boundary element method (BEM) formulation, based on time-independent fundamental solutions, is developed and implemented to couple the fluid flow and two-dimensional elastostatic problems. The integration over boundary elements is evaluated using a numerical Gauss procedure. A semi-analytical scheme for the case of triangular domain cells is followed to carry out the relevant domain integrals. The non-linear problem is solved by a Newton-Raphson procedure. Numerical examples are presented, in order to validate the implemented formulation and to illustrate its efficacy. (C) 2011 Elsevier Ltd. All rights reserved.
Resumo:
Full validation of the electrochemical mechanisms so far postulated as driving force of electric field-assisted non-spontaneous crystallization development in given glasses has suffered experimental restrictions. In this work, we looked into origin of this phenomenon in lead oxyfluoroborate glasses, resulting in beta-PbF2 growth even below the corresponding glass transition temperatures, through achieving a systematic study of not only Pt,Ag/Glass/Ag,Pt- but also Pt,Ag/Glass/YSZ:PbF2/Ag,Pt-type cells, where YSZ:PbF2 represents a two-phase system (formed by Y2O3-doped ZrO2 and PbF2). It is demonstrated that crystallization induction in these glasses involves Pb2+ ions reduction at the cathode, the phenomenon being, however, confirmed only when the F- ions were simultaneously also able to reach the anode for oxidation, after assuring either a direct glass-anode contact or percolation pathways for free fluoride migration across the YSZ:PbF2 mixtures. A further support of this account is that the electrochemically induced beta-PbF2 phase crystallizes showing ramified-like microstructure morphology that arises, accordingly, from development of electroconvective diffusion processes under electric field action.
Resumo:
The efficiency of the charge-carrier photogeneration processes in poly(2,5-bis(3',7'-dimethyl-octyloxy)-1,4-phenylene vinylene) (OC(1)OC10-PPV) has been analyzed by the spectral response of the photocurrent of devices in ITO/polymer/Al structures. The symbatic response of the photocurrent action spectra of the OC1OC10-PPV devices, obtained for light-excitation through the ITO electrode and for forward bias, has been fitted using a phenomenological model which considers that the predominant transport mechanism under external applied electric field is the drift of photogenerated charge-carriers, neglecting charge-carrier diffusion. The proposed model takes into account that charge-carrier photogeneration occurs via intermediate stages of bounded pairs (excitonic states), followed by dissociation processes. Such processes result in two different contributions to the photoconductivity: The first one, associated to direct creation of unbound polaron pairs due to intrinsic photoionization; and the second one is associated to secondary processes like extrinsic photoinjection at the metallic electrodes. The results obtained from the model have shown that the intrinsic component of the photoconductivity at higher excitation energies has a considerably higher efficiency than the extrinsic one, suggesting a dependence on the photon energy for the efficiency of the photogeneration process.
Resumo:
This paper presents a comparison of descriptive statistics obtained for brittle structural lineaments extracted manually from LANDSAT images and shaded relief images from SRTM 3 DEM at 1:100, 000 and 1:500, 000 scales. The selected area is located in the southern of Brazil and comprises Precambrian rocks and stratigraphic units of the Paraná Basin. The application of this methodology shows that the visual interpretation depends on the kind of remote sensing image. The resulting descriptive statistics obtained for lineaments extracted from the images do not follow the same pattern according to the scale adopted. The main direction obtained for Proterozoic rocks using both image types at a 1:500, 000 scale are close to NS±10, whereas at a 1:100, 000 scale N45E was obtained for shaded relief images from SRTM 3 DEM and N10W for LANDSAT images. The Paleozoic sediments yielded the best results for the different images and scales (N50W). On the other hand, the Mesozoic igneous rocks showed greatest differences, the shaded relief images from SRTM 3 DEM images highlighting NE structures and the LANDSAT images highlighting NW structures. The accumulated frequency demonstrated high similarity between products for each image type no matter the scale, indicating that they can be used in multiscale studies. Conversely, major differences were found when comparing data obtained using shaded relief images from SRTM 3 DEM and Landsat images at a 1:100, 000 scale.
Resumo:
The objective of this work is to predict the temperature distribution of partially submersed umbilical cables under different operating and environmental conditions. The commercial code Fluent® was used to simulate the heat transfer and the air fluid flow of part of a vertical umbilical cable near the air-water interface. A free-convective three-dimensional turbulent flow in open-ended vertical annuli was solved. The influence of parameters such as the heat dissipating rate, wind velocity, air temperature and solar radiation was analyzed. The influence of the presence of a radiation shield consisting of a partially submersed cylindrical steel tube was also considered. The air flow and the buoyancydriven convective heat transfer in the annular region between the steel tube and the umbilical cable were calculated using the standard k-ε turbulence model. The radiative heat transfer between the umbilical external surface and the radiation shield was calculated using the Discrete Ordinates model. The results indicate that the influence of a hot environment and intense solar radiation may affect the umbilical cable performance in its dry portion.
Resumo:
Small scale fluid flow systems have been studied for various applications, such as chemical reagent dosages and cooling devices of compact electronic components. This work proposes to present the complete cycle development of an optimized heat sink designed by using Topology Optimization Method (TOM) for best performance, including minimization of pressure drop in fluid flow and maximization of heat dissipation effects, aiming small scale applications. The TOM is applied to a domain, to obtain an optimized channel topology, according to a given multi-objective function that combines pressure drop minimization and heat transfer maximization. Stokes flow hypothesis is adopted. Moreover, both conduction and forced convection effects are included in the steady-state heat transfer model. The topology optimization procedure combines the Finite Element Method (to carry out the physical analysis) with Sequential Linear Programming (as the optimization algorithm). Two-dimensional topology optimization results of channel layouts obtained for a heat sink design are presented as example to illustrate the design methodology. 3D computational simulations and prototype manufacturing have been carried out to validate the proposed design methodology.
Resumo:
The object of the present study is the process of gas transport in nano-sized materials, i.e. systems having structural elements of the order of nanometers. The aim of this work is to advance the understanding of the gas transport mechanism in such materials, for which traditional models are not often suitable, by providing a correct interpretation of the relationship between diffusive phenomena and structural features. This result would allow the development new materials with permeation properties tailored on the specific application, especially in packaging systems. The methods used to achieve this goal were a detailed experimental characterization and different simulation methods. The experimental campaign regarded the determination of oxygen permeability and diffusivity in different sets of organic-inorganic hybrid coatings prepared via sol-gel technique. The polymeric samples coated with these hybrid layers experienced a remarkable enhancement of the barrier properties, which was explained by the strong interconnection at the nano-scale between the organic moiety and silica domains. An analogous characterization was performed on microfibrillated cellulose films, which presented remarkable barrier effect toward oxygen when it is dry, while in the presence of water the performance significantly drops. The very low value of water diffusivity at low activities is also an interesting characteristic which deals with its structural properties. Two different approaches of simulation were then considered: the diffusion of oxygen through polymer-layered silicates was modeled on a continuum scale with a CFD software, while the properties of n-alkanthiolate self assembled monolayers on gold were analyzed from a molecular point of view by means of a molecular dynamics algorithm. Modeling transport properties in layered nanocomposites, resulting from the ordered dispersion of impermeable flakes in a 2-D matrix, allowed the calculation of the enhancement of barrier effect in relation with platelets structural parameters leading to derive a new expression. On this basis, randomly distributed systems were simulated and the results were analyzed to evaluate the different contributions to the overall effect. The study of more realistic three-dimensional geometries revealed a prefect correspondence with the 2-D approximation. A completely different approach was applied to simulate the effect of temperature on the oxygen transport through self assembled monolayers; the structural information obtained from equilibrium MD simulations showed that raising the temperature, makes the monolayer less ordered and consequently less crystalline. This disorder produces a decrease in the barrier free energy and it lowers the overall resistance to oxygen diffusion, making the monolayer more permeable to small molecules.
Resumo:
Mit dem System KCo2-xCuxS2 wurde ein neues magnetoresistives System gefunden. Der negative Magnetowiderstand ist mit der Größenordnung von 10 % in 8 Tesla bei 4 K klein im Vergleich zu Mangan-Perowskiten, jedoch eindeutig intrinsisch.Die magnetische Struktur des Thiospinells Fe0.5Cu0.5Cr2S4 konnte durch Neutronenbeugung, Mößbauer-Spektroskopie sowie begleitende Bandstrukturrechnungen aufgeklärt werden. Ein negativen Magnetowiderstand von 5,5 % nahe der Curie-Temperatur in Magnetfeldern von 8 Tesla bei der isostrukturellen eisenreichen Verbindung Fe0.75Cu0.25Cr2S4 wurde gefunden.Die intermetallischen Verbindungen des Gadoliniums weisen alle hohe negative Magnetowiderstände bei TC auf. Sowohl bei GdAl2 als auch bei GdPdP und GdPtP werden Widerstandsabsenkungen in 8 Tesla beobachtet, die bei ~1,5 TC 4 % erreichen und bis zu Temperaturen von 5 K über 6 % liegen. Während der Transportmechanismus in GdAl2 offenbar auf einer direkten Gd-Gd Wechselwirkung beruht, ist bei GdPdP und GdPtP bei tiefen Temperaturen ein nicht eindeutiges Verhalten beobachtbar. Ein Einfluss von Fremdphasen kann jedoch ausgeschlossen werden.Unter den metallreichen Phosphiden hexagonaler Struktur zeigt Fe2P große negative MR-Effekte von 7 % schon bei Raumtemperatur in hohen Feldern. Nahe der ferromagnetischen Ordnung reagiert die Verbindung auf äußere Felder bei niedrigen Feldstärken von weniger als 2 Tesla mit einer Erhöhung der Leitfähigkeit um 10 bis 11 %.
Resumo:
Zusammenfassung der Dissertation von Markus Böhm 'Klonierung, Sequenzierung und Funktion der beiden SAPK-Mitglieder JNK und p38 MAPK des marinen Schwamms S. domuncula' am Fachbereich Biologie der Johannes Gutenberg-Universität Mainz: Da Schwämme zu den einfachsten Metazoen gehören, eignen sie sich gut zur Erforschung von Signaltransduktionsprozessen. Die SAPKs stellen hoch konservierte Signalmoleküle dar, die durch viele Zellstress-auslösende Faktoren aktiviert werden und in zahlreichen biologischen Prozessen involviert sind.Im Rahmen dieser Arbeit wurden zwei SAPK-Gene aus S. domuncula isoliert. Ihre abgeleiteten Aminosäuresequenzen wiesen die höchsten Homologien zu den Mitgliedern der SAPK1/JNK- und SAPK2/p38 MAPK-Subfamilie der Metazoen auf. Die geringste Übereinstimmung existierte gegenüber der einzigen SAPK der Hefe (HOG1). Beide Gene des Schwamms besaßen zudem eine außerordentlich hohe Übereinstimmung hinsichtlich ihrer Exon/Intron-Strukturen. Diese Ergebnisse deuten daraufhin, dass die SAPKs der multizellulären Tiere durch Duplikation eines HOG1-verwandten Vorläufergens entstanden sind. Durch den Vergleich der Intronpositionen mit denen von SAPK-Genen aus D. melanogaster, C. elegans und H. sapiens wurde ersichtlich, dass die Positionen der nichtkodierenden Sequenzbereiche dieser Gene hoch konserviert sind. Western Blot-Analysen demonstrierten, dass beide Schwamm-Kinasen durch hyperosmotischen Stress, LPS und den Phosphataseinhibitor Okadainsäure aktiviert werden. Außerdem wurde durch Versuche mit HOG1-defizienten Hefemutanten gezeigt, dass sie die Funktion des HOG1-Proteins in S. cerevisiae vollständig übernehmen können. Da die aktivierten Kinasen des Schwamms wie HOG1 im Nukleus der Hefezellen akkumuliert werden, müssen die Kerntransportmechanismen der SAPKs ebenfalls evolutionär erhalten sein.
Resumo:
ZusammenfassungIn dieser Arbeit konnte gezeigt werden, dass neben dem Oxytocinrezeptor auch die anderen Rezeptoren der Familie der Neurohypophysenhormone, die Vasopressinrezeptoren, in der gleichen Weise in ihren Bindungseigenschaften von Cholesterin beeinflusst werden. Im Gegensatz dazu zeigt der Cholecystokininrezeptor Typ B keine direkte Wechselwirkung mit Cholesterin. Durch Austausch der Transmembranhelices 6 und 7 des Oxytocinrezeptors mit entsprechenden Bereichen des Cholecystokininrezeptors wurde ein Rezeptor erzeugt, der bezüglich Bindungsverhalten und Cholesterinabhängigkeit keine Unterschiede zu dem Wildtyp-Oxytocinrezeptor zeigte. Durch den Einsatz von computergestütztem 'Modeling' wurde für die Interaktion des Oxytocinrezeptors mit Cholesterin eine Stelle zwischen den Transmembranhelices 5 und 6 vorgeschlagen. Um die Verteilung des Cholesterins in der Zelle zu untersuchen, wurde ein selbst synthetisiertes, fluoreszierendes Cholesterinderivat (Fluochol) eingesetzt. Die Komplexierung in Cyclodextrinen ermöglichte die Einlagerung von Fluochol in die Plasmamembran von Zellen. Der Einstrom des Fluochol in das ER erfolgte innerhalb von Minuten und war energieunabhängig. Schließlich wurde Fluochol in Lipidtröpfchen transportiert, die in fast allen Zellen für die Speicherung überschüssiger intrazellulärer Lipide dienen. Die Tröpfchen werden aus dem endoplasmatischen Retikulum gebildet und enthalten neben Phospholipiden auch Cholesterin, das durch das Enzym ACAT mit langkettigen Fettsäuren verestert wird.
Resumo:
This work investigates the slamming phenomenon experienced during the water entry of deformable bodies. Wedges are chosen as reference geometry due to their similarity to a generic hull section. Hull slamming is a phenomenon occurring when a ship re-enters the water after having been partially or completely lifted out the water. While the analysis of rigid structures entering the water has been extensively studied in the past and there are analytical solutions capable of correctly predicting the hydrodynamic pressure distribution and the overall impact dynamics, the effect of the structural deformation on the structural force is still a challenging problem to be solved. In fact, in case of water impact of deformable bodies, the dynamic deflection could interact with the fluid flow, changing the hydrodynamic load. This work investigates the hull-slamming problem by experiments and numerical simulations of the water entry of elastic wedges impacting on an initially calm surface. The effect of asymmetry due to horizontal velocity component or initial tilt angle on the impact dynamics is also studied. The objective of this work is to determine an accurate model to predict the overall dynamics of the wedge and its deformations. More than 1200 experiments were conducted by varying wedge structural stiffness, deadrise angle, impact velocity and mass. On interest are the overall impact dynamics and the local structural deformation of the panels composing the wedge. Alongside with the experimental analysis, numerical simulations based on a coupled Smoothed Particle Hydrodynamics (SPH) and FEM method are developed. The experimental results provide evidence of the mutual interaction between hydrodynamic load and structural deformation. It is found a simple criterion for the onset of fluid structure interaction (FSI), giving reliable information on the cases where FSI should been taken into account.
Resumo:
The carbonate outcrops of the anticline of Monte Conero (Italy) were studied in order to characterize the geometry of the fractures and to establish their influence on the petrophysical properties (hydraulic conductivity) and on the vulnerability to pollution. The outcrops form an analog for a fractured aquifer and belong to the Maiolica Fm. and the Scaglia Rossa Fm. The geometrical properties of fractures such as orientation, length, spacing and aperture were collected and statistically analyzed. Five types of mechanical fractures were observed: veins, joints, stylolites, breccias and faults. The types of fractures are arranged in different sets and geometric assemblages which form fracture networks. In addition, the fractures were analyzed at the microscale using thin sections. The fracture age-relationships resulted similar to those observed at the outcrop scale, indicating that at least three geological episodes have occurred in Monte Conero. A conceptual model for fault development was based on the observations of veins and stylolites. The fracture sets were modelled by the code FracSim3D to generate fracture network models. The permeability of a breccia zone was estimated at microscale by and point counting and binary image methods, whereas at the outcrop scale with Oda’s method. Microstructure analysis revealed that only faults and breccias are potential pathways for fluid flow since all veins observed are filled with calcite. According this, three scenarios were designed to asses the vulnerability to pollution of the analogue aquifer: the first scenario considers the Monte Conero without fractures, second scenario with all observed systematic fractures and the third scenario with open veins, joints and faults/breccias. The fractures influence the carbonate aquifer by increasing its porosity and hydraulic conductivity. The vulnerability to pollution depends also on the presence of karst zones, detric zones and the material of the vadose zone.