Finite element studies of the mechanical behaviour of the diaphragm in normal and pathological cases

The diaphragm is a muscular membrane separating the abdominal and thoracic cavities, and its motion is directly linked to respiration. In this study, using data from a 59-year-old female cadaver obtained from the Visible Human Project, the diaphragm is reconstructed and, from the corresponding solid object, a shell finite element mesh is generated and used in several analyses performed with the ABAQUS 6.7 software. These analyses consider the direction of the muscle fibres and the incompressibility of the tissue. The constitutive model for the isotropic strain energy as well as the passive and active strain energy stored in the fibres is adapted from Humphrey's model for cardiac muscles. Furthermore, numerical results for the diaphragmatic floor under pressure and active contraction in normal and pathological cases are presented.

Re-entrant phase behaviour of network fluids: A patchy particle model with temperature-dependent valence

We study a model consisting of particles with dissimilar bonding sites ("patches"), which exhibits self-assembly into chains connected by Y-junctions, and investigate its phase behaviour by both simulations and theory. We show that, as the energy cost epsilon(j) of forming Y-junctions increases, the extent of the liquid-vapour coexistence region at lower temperatures and densities is reduced. The phase diagram thus acquires a characteristic "pinched" shape in which the liquid branch density decreases as the temperature is lowered. To our knowledge, this is the first model in which the predicted topological phase transition between a fluid composed of short chains and a fluid rich in Y-junctions is actually observed. Above a certain threshold for epsilon(j), condensation ceases to exist because the entropy gain of forming Y-junctions can no longer offset their energy cost. We also show that the properties of these phase diagrams can be understood in terms of a temperature-dependent effective valence of the patchy particles. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3605703]

A web-based intelligent tutoring system on teaching and learning electrical project

The Information and Communication Technology (ICT) provide new strategies for disseminating information and new communication models in order to change attitudes and human behaviour concerning to education. Nowadays the internet is crucial as a means of communication and information sharing. To education or tutorship will be required to use ICT, supported on the internet, to establish the communication of teacher-student and student-student, disseminating the content of the subjects, and as a way of teaching and learning process. This paper presents an intelligent tutor that aims to be a tool to support teaching and learning in the field of the electrical engineering project.

Importância e satisfação atribuídas pelos professores universitários às competências comunicacionais

O Processo de Bolonha enfatiza as competências de comunicação dos estudantes universitários, nomeadamente os da saúde. As conceções dos professores tendem a variar com a idade e são importantes na formação das conceções dos alunos. Objetivos – Analisar a importância e a satisfação que professores universitários atribuem a diversas competências de comunicação e a sua relação com a idade. Metodologia – Foram avaliados 79 professores universitários, entre os 29 e os 82 anos (M=41,89; DP=9,99), maioritariamente do sexo feminino (69,6%), através de um Questionário Sóciodemográfico e das Escalas de Importância (EI) e Satisfação (ES) do Questionário de Competências de Comunicação (QCC). Resultados – Entre 1 a 4 participantes atribuíram a 11 dos 26 itens da EI e a 7 dos 26 itens da ES o menor valor possível. Houve também pelo menos um participante a atribuir o maior valor possível a todos os itens da EI (entre 8 a 51 participantes) e da ES (entre 6 a 46 participantes). A competência “agradecer” foi considerada a mais importante e satisfatória. A idade não se correlacionou com os itens da EI, correlacionando-se com “responder a perguntas” (r(78)=0,27, p≤0,02) e “pedir feedback nas relações sociais” (r(78)=0,30, p≤0,008) da ES. Dado que competências imprescindíveis aos profissionais de saúde obtiveram scores indicadores de baixa importância (e.g., “discordar”, “recusar pedidos”, “fazer pedidos”, “parafrasear”), considera-se importante trabalhar a perceção de importância dos professores universitários que não parece variar com a idade. Competências importantes para o trabalho do professor (e.g., “recusar pedidos”, “pedir mudança de comportamento”) obtiveram das médias de satisfação mais baixas, sugerindo necessidade de treino.

Paul Auster and the music of change: building new stories

In the work of Paul Auster (Newark, 1947 - ), we find two main themes: the sense of loss and existential drift and the loneliness of the individual fully committed to the work of writing, as if he had been confined to the book that commands his life. However, this second theme is clearly the dominant one because the character's space of solitude may include its own wandering, because this wandering is also often performed inside the four walls of a room, just like it is narrated inside the space of the page and the book. Both in his poetry, essays and fiction, Auster seems to face the work of writing as an actual physical effort of effective construction, as if the words that are aligned in the poem-text were stones to place in a row when building a wall or some other structure in stone.

Detection of Change in Fluorescence Between Reactive Cyan and the Yellow Fluorophores Using a-SiC:H Multilayer Transducers

The transducer consists of a semiconductor device based on two stacked -i-n heterostructures that were designed to detect the emissions of the fluorescence resonance energy transfer between fluorophores in the cyan (470 nm) and yellow (588 nm) range of the spectrum. This research represents a preliminary study on the use of such wavelength-sensitive devices as photodetectors for this kind of application. The device was characterized through optoelectronic measurements concerning spectral response measurements under different electrical and optical biasing conditions. To simulate the fluorescence resonance energy transfer (FRET) pairs, a chromatic time-dependent combination of cyan and yellow wavelengths was applied to the device. The generated photocurrent was measured under reverse and forward bias to read out the output photocurrent signal. A different wavelength-biasing light was also superimposed. Results show that under reverse bias, the photocurrent signal presents four separate levels, each one assigned to the different wavelength combinations of the FRET pairs. If a blue background is superimposed, the yellow channel is enhanced and the cyan suppressed, while under red irradiation, the opposite behavior occurs. So, under suitable biasing light, the transducer is able to detect separately the cyan and yellow fluorescence pairs. An electrical model, supported by a numerical simulation, supports the transduction mechanism of the device.

Synthesis, structure and electrochemical behaviour of Na, Mg-II, Mn-II, Cd-II and Ni-II complexes of 3-(2-carboxyphenylhydrazone)pentane-2,4-dione

Mononuclear manganese(II) [Mn(kappa O-HL)(2)(CH3OH)(4)] (4), nickel(II) [Ni(kappa O-2, kappa N-L)(H2O)(3)] (5), cadmium(II) [Cd(kappa O-2-HL)(2)(CH3OH)(3)] (7), tetranuclear zinc(II) [Zn-4(mu-OH)(2)(1 kappa O:2 kappa O-HL)(4)(kappa O-HL)(2)(H2O)(4)] (6) and polynuclear aqua sodium(I) [Na(H2O)(2)(mu-H2O)(2)](n)(HL)(n) (2) and magnesium(II) [Mg(OH)(H2O)(mu-H2O)(2)](n)(-HL)(n) (3) complexes were synthesized using 3-(2-carboxyphenyl-hydrazone)pentane-2,4-dione (H2L, 1) as a ligand precursor. The complexes were characterized by single crystal X-ray diffraction, elemental analysis, IR, H-1 and C-13 NMR (for 2, 3, 6 and 7) spectroscopies. Mono- or dianionic deprotonated derivatives of H2L display different coordination modes and lead to topologies and nuclearities of the complexes depending on metal ions and conditions used for the syntheses. Extensive intermolecular H-bonds form supramolecular arrangements in 1D chains (4 and 6), 1D chains of the organic anion and 2D networks of the metal-aqua aggregates (2 and 3), 2D networks (7) or even 3D frameworks (5). Electrochemical studies, by cyclic voltammetry and controlled potential electrolysis, show ligand centred redox processes as corroborated by theoretical DFT calculations in terms of LUMO and HOMO compositions. (C) 2012 Elsevier Ltd. All rights reserved.

Wetting behaviour of femtosecond laser textured Ti-6Al-4V surfaces

The aim of the present work was to investigate the wetting behaviour of biomedical grade Ti-6Al-4V alloy surfaces textured by a femtosecond laser treatment. The material was treated in ambient atmosphere using an Yb: KYW chirped-pulse-regenerative amplification laser with a wavelength of 1030 nm and a pulse duration of 500 fs. Four main types of surface textures were obtained depending on the processing parameters and laser treatment method. These textures consist of: (1) nanoscale laser-induced periodic surface structures (LIPSS); (2) nanopillars; (3) a bimodal roughness distribution texture formed of LIPSS overlapping microcolumns; (4) a complex texture formed of LIPSS overlapping microcolumns with a periodic variation of the columns size in the laser scanning direction. The wettability of the surfaces was evaluated by the sessile drop method using distilled-deionized (DD) water and Hank's balanced salt solution (HBSS) as testing liquids. The laser treated surfaces present a hydrophilic behaviour as well as a high affinity for the saline solution, with equilibrium contact angles in the ranges 24.1-76.2. for DD water and 8.4-61.8. for HBSS. The wetting behaviour is anisotropic, reflecting the anisotropy of the surface textures. (c) 2012 Elsevier B.V. All rights reserved.

Computing the phase diagram of binary mixtures: A patchy particle case study

We investigate the phase behaviour of 2D mixtures of bi-functional and three-functional patchy particles and 3D mixtures of bi-functional and tetra-functional patchy particles by means of Monte Carlo simulations and Wertheim theory. We start by computing the critical points of the pure systems and then we investigate how the critical parameters change upon lowering the temperature. We extend the successive umbrella sampling method to mixtures to make it possible to extract information about the phase behaviour of the system at a fixed temperature for the whole range of densities and compositions of interest. (C) 2013 AIP Publishing LLC.

The effect of the angle of incidence on the aqueous corrosion of ion implanted M50 steel substrates

Following work on tantalum and chromium implanted flat M50 steel substrates, this work reports on the electrochemical behaviour of M50 steel implanted with tantalum and chromium and the effect of the angle of incidence. Proposed optimum doses for resistance to chloride attack were based on the interpretation of results obtained during long-term and accelerated electrochemical testing. After dose optimization from the corrosion viewpoint, substrates were implanted at different angles of incidence (15°, 30°, 45°, 60°, 75°, 90°) and their susceptibility to localized corrosion assessed using open-circuit measurements, step by step polarization and cyclic voltammetry at several scan rates (5–50 mV s-1). Results showed, for tantalum implanted samples, an ennoblement of the pitting potential of approximately 0.5 V for an angle of incidence of 90°. A retained dose of 5 × 1016 atoms cm-2 was found by depth profiling with Rutherford backscattering spectrometry. The retained dose decreases rapidly with angle of incidence. The breakdown potential varies roughly linearly with the angle of incidence up to 30° falling fast to reach -0.1 V (vs. a saturated calomel electrode (SCE)) for 15°. Chromium was found to behave differently. Maximum corrosion resistance was found for angles of 45°–60° according to current densities and breakdown potentials. Cr+ depth profiles ((p,γ) resonance broadening method), showed that retained doses up to an angle of 60° did not change much from the implanted dose at 90°, 2 × 1017 Cr atoms cm-2. The retained implantation dose for tantalum and chromium was found to follow a (cos θ)8/3 dependence where θ is the angle between the sample normal and the beam direction.

Impacto das campanhas publicitárias contra o tabagismo no comportamento do consumidor

Todos os anos, milhares de pessoas morrem vítimas de doenças causadas pelo consumo de produtos derivados do tabaco, este é considerado a principal causa de morte evitável. O tabaco também colabora com as seis das oito principais causas de mortes entre fumantes e não fumantes a nível mundial. Algumas medidas governamentais como as campanhas publicitárias antitabagistas, buscam alertar, conscientizar e mudar o pensamento e o interesse coletivo neste tipo de produto e consequentemente, diminuir a taxa de consumo. Avaliar se as crenças, pensamentos e atitudes dos brasileiros são influenciados por este tipo de publicidade e se o comportamento relacionado a não fumar ou deixar de fumar é uma consequência da persuasão das mensagens antitabagistas, ajudam a conhecer o real impacto destas campanhas e sua eficácia. Através dos métodos de investigação quantitativo e qualitativo e das análises extensiva e semiótica, a pesquisa inquiriu 272 indivíduos brasileiros à respeito das advertências sanitárias e das campanhas publicitárias antitabagistas, classificando-os como não fumantes, ex-fumantes e fumantes, identificando os elementos visuais e textuais que compõem a narrativa publicitária de 5 anúncios antitabagistas. Após a análise, a pesquisa concluiu que as campanhas publicitárias coordenadas pelo INCA – Instituto Nacional de Câncer, denominadas campanhas antitabagistas, são eficazes para alertar e conscientizar os indivíduos sobre os males causados pelo consumo do cigarro mas ineficazes para influenciar suas atitudes e comportamentos. Embora estas consigam persuadir à crença nas mensagens, fazendo com que os indivíduos as vejam como verdadeira, isto não é suficiente para que a intenção de deixar de fumar torne-se um ato prático. Todos os anúncios possuem o mesmo formato e a maioria utilizou o mesmo percurso visual, equilíbrio, enquadramento, luz, ângulo e função do personagem. Todos possuem textos com funções identificadora, ancoragem e apoio e a narrativa conota o cigarro como algo negativo, prejudicial, mortífero e destruidor.

Plano de comunicação: hábitos alimentares dos jovens portugueses

O intuito deste projecto de investigação é o de fazer um plano de comunicação para alterar o comportamento dos jovens face aos hábitos alimentares. O público-alvo desta comunicação são jovens entre os 16 e 21 anos. O problema em estudo neste trabalho são os hábitos alimentares dos jovens portugueses, tendo como objetivo a melhoria por parte dos jovens dos hábitos alimentares. Uma vez que estamos a alterar comportamentos e atitudes, este plano de comunicação insere-se no âmbito do marketing social. O presente projecto foi desenvolvido em três fases: primeiro foi feita uma revisão da literatura para perceber quais os hábitos alimentares dos jovens e o que já foi feito de comunicação para esta causa. Em seguida foi efectuado um questionário aos jovens para que fosse possível perceber o que consomem, as noções que têm de alimentação saudável e como se deve comunicar sobre hábitos alimentares com o target definido. Por fim, realizou-se uma estratégia de comunicação com base nas respostas dos inquiridos. A estratégia de comunicação é o mais adequada possível para os jovens, a fim de se conseguir passar a mensagem. De acordo com os resultados obtidos podemos perceber que muitos dos inquiridos não têm a melhor alimentação, contudo a maioria tem noção do que são bons hábitos alimentares. Relativamente aos meios para passar a mensagem, os inquiridos elegeram aqueles mais direcionados aos jovens. O resultado deste projecto foi um plano de comunicação com o objetivo dos jovens alterarem os seus hábitos alimentares. Este plano teve grande enfoque na publicidade, nas relações públicas e nos social media.

Oral health in the family health strategy: a change of practices or semantics diversionism

OBJECTIVE:To evaluate public health dentistry practices of two different family health models. METHODS: Qualitative study conducted with data obtained from focus groups consisting of 58 dentists working in the Family Health Strategy for at least three years between August-October, 2006. The Paideia Family Health Approach was used in the city of Campinas and the Oral Health Initiative as part of the Family Health Strategy was implemented in the city of Curitiba, Southeastern and Southern Brazil, respectively. Data was analyzed using the hermeneutic-dialectic method. Analysis indicators were employed to indicate backwardness, stagnation or progress in oral health practices effective from the implementation of the strategies referred. The indicators used were: work process; interdisciplinary approach; territorialization; capacity building of human resources; health promotion practices; and responsiveness to users' demands. RESULTS: There was progress in user access to services, humanization of health care, patient welcoming and patient-provider relationship. The results related to health promotion practices, territorialization, interdisciplinary approach and resource capacity building indicated a need for technical and operational enhancements in both cities. CONCLUSIONS: Both models have brought about important advances in terms of increased access to services and humanization of health care. Universal access to oral health at all levels of complexity was not achieved in both cities studied. Local health managers and oral health program coordinators must bring more weight to bear in the arena that defines public policy priorities.

Adaptive learning in agents behaviour: a framework for electricity markets simulation

Electricity markets are complex environments with very particular characteristics. A critical issue regarding these specific characteristics concerns the constant changes they are subject to. This is a result of the electricity markets’ restructuring, which was performed so that the competitiveness could be increased, but it also had exponential implications in the increase of the complexity and unpredictability in those markets scope. The constant growth in markets unpredictability resulted in an amplified need for market intervenient entities in foreseeing market behaviour. The need for understanding the market mechanisms and how the involved players’ interaction affects the outcomes of the markets, contributed to the growth of usage of simulation tools. Multi-agent based software is particularly well fitted to analyze dynamic and adaptive systems with complex interactions among its constituents, such as electricity markets. This dissertation presents ALBidS – Adaptive Learning strategic Bidding System, a multiagent system created to provide decision support to market negotiating players. This system is integrated with the MASCEM electricity market simulator, so that its advantage in supporting a market player can be tested using cases based on real markets’ data. ALBidS considers several different methodologies based on very distinct approaches, to provide alternative suggestions of which are the best actions for the supported player to perform. The approach chosen as the players’ actual action is selected by the employment of reinforcement learning algorithms, which for each different situation, simulation circumstances and context, decides which proposed action is the one with higher possibility of achieving the most success. Some of the considered approaches are supported by a mechanism that creates profiles of competitor players. These profiles are built accordingly to their observed past actions and reactions when faced with specific situations, such as success and failure. The system’s context awareness and simulation circumstances analysis, both in terms of results performance and execution time adaptation, are complementary mechanisms, which endow ALBidS with further adaptation and learning capabilities.

Alright: a distinctive pathway of change from the 18th century to the present day

The origins of the vast majority of the words we use in contemporary English go back as far as Old or Middle English. In contrast, alright and all right in their present-day application appear to be the result of a more recent evolution, as there is no evidence of their use, not even in the two-word form, in the published fiction before the 18th century. Furthermore, there are not in the research literature, at least to my knowledge, any previous linguistic studies on this specific subject matter. The present article is simply an attempt to describe the various processes of diachronic change that brought about the emergence of alright.