Pollutant emissions during pyrolysis and combustion of waste printed circuit boards, before and after metal removal

The constant increase in the production of electronic devices implies the need for an appropriate management of a growing number of waste electrical and electronic equipment. Thermal treatments represent an interesting alternative to recycle this kind of waste, but particular attention has to be paid to the potential emissions of toxic by-products. In this study, the emissions from thermal degradation of printed circuit boards (with and without metals) have been studied using a laboratory scale reactor, under oxidizing and inert atmosphere at 600 and 850 °C. Apart from carbon oxides, HBr was the main decomposition product, followed by high amounts of methane, ethylene, propylene, phenol and benzene. The maximum formation of PAHs was found in pyrolysis at 850 °C, naphthalene being the most abundant. High levels of 2-, 4-, 2,4-, 2,6- and 2,4,6-bromophenols were found, especially at 600 °C. Emissions of PCDD/Fs and dioxin-like PCBs were quite low and much lower than that of PBDD/Fs, due to the higher bromine content of the samples. Combustion at 600 °C was the run with the highest PBDD/F formation: the total content of eleven 2,3,7,8-substituted congeners (tetra- through heptaBDD/Fs) was 7240 and 3250 ng WHO2005-TEQ/kg sample, corresponding to the sample with and without metals, respectively.

Capillary microreactors based on hierarchical SiO2 monoliths incorporating noble metal nanoparticles for the Preferential Oxidation of CO

Novel hierarchical SiO2 monolithic microreactors loaded with either Pd or Pt nanoparticles have been prepared in fused silica capillaries and tested in the Preferential Oxidation of CO (PrOx) reaction. Pd and Pt nanoparticles were prepared by the reduction by solvent method and the support used was a mesoporous SiO2 monolith prepared by a well-established sol–gel methodology. Comparison of the activity with an equivalent powder catalyst indicated that the microreactors show an enhanced catalytic behavior (both in terms of CO conversion and selectivity) due to the superior mass and heat transfer processes that take place inside the microchannel. TOF values at low CO conversions have been found to be ∼2.5 times higher in the microreactors than in the powder catalyst and the residence time seems to have a noticeable influence over the selectivity of the catalysts designed for this reaction. The Pd and Pt flexible microreactors developed in this work have proven to be effective for the CO oxidation reaction both in the presence and absence of H2, standing out as a very interesting and suitable option for the development of CO purification systems of small dimensions for portable and on-board applications.

Electrocatalytic reduction of CO2 to formate using particulate Sn electrodes: Effect of metal loading and particle size

The development of electrochemical processes for the conversion of CO2 into value-added products allows innovative carbon capture & utilization (CCU) instead of carbon capture & storage (CCS). In addition, coupling this conversion with renewable energy sources would make it possible to chemically store electricity from these intermittent renewable sources. The electroreduction of CO2 to formate in aqueous solution has been performed using Sn particles deposited over a carbon support. The effect of the particle size and Sn metal loading has been evaluated using cyclic voltammetry and chronoamperometry. The selected electrode has been tested on an experimental filter-press type cell system for continuous and single pass CO2 electroreduction to obtain formate as main product at ambient pressure and temperature. Experimental results show that using electrodes with 0.75 mg Sn cm−2, 150 nm Sn particles, and working at a current density of 90 mA cm−2, it is possible to achieve rates of formate production over 3.2 mmol m−2 s−1 and faradaic efficiencies around 70% for 90 min of continuous operation. These experimental conditions allow formate concentrations of about 1.5 g L−1 to be obtained on a continuous mode and with a single pass of catholyte through the cell.

Large spin splitting in the conduction band of transition metal dichalcogenide monolayers

We study the conduction band spin splitting that arises in transition metal dichalcogenide (TMD) semiconductor monolayers such as MoS2, MoSe2, WS2, and WSe2 due to the combination of spin-orbit coupling and lack of inversion symmetry. Two types of calculation are done. First, density functional theory (DFT) calculations based on plane waves that yield large splittings, between 3 and 30 meV. Second, we derive a tight-binding model that permits to address the atomic origin of the splitting. The basis set of the model is provided by the maximally localized Wannier orbitals, obtained from the DFT calculation, and formed by 11 atomiclike orbitals corresponding to d and p orbitals of the transition metal (W, Mo) and chalcogenide (S, Se) atoms respectively. In the resulting Hamiltonian, we can independently change the atomic spin-orbit coupling constant of the two atomic species at the unit cell, which permits to analyze their contribution to the spin splitting at the high symmetry points. We find that—in contrast to the valence band—both atoms give comparable contributions to the conduction band splittings. Given that these materials are most often n-doped, our findings are important for developments in TMD spintronics.

Electronic properties of transition metal atoms on Cu2N/Cu(100)

We study the nature of spin excitations of individual transition metal atoms (Ti, V, Cr, Mn, Fe, Co, and Ni) deposited on a Cu2N/Cu(100) surface using both spin-polarized density functional theory (DFT) and exact diagonalization of an Anderson model derived from DFT. We use DFT to compare the structural, electronic, and magnetic properties of different transition metal adatoms on the surface. We find that the average occupation of the transition metal d shell, main contributor to the magnetic moment, is not quantized, in contrast with the quantized spin in the model Hamiltonians that successfully describe spin excitations in this system. In order to reconcile these two pictures, we build a zero bandwidth multi-orbital Anderson Hamiltonian for the d shell of the transition metal hybridized with the p orbitals of the adjacent nitrogen atoms, by means of maximally localized Wannier function representation of the DFT Hamiltonian. The exact solutions of this model have quantized total spin, without quantized charge at the d shell. We propose that the quantized spin of the models actually belongs to many-body states with two different charge configurations in the d shell, hybridized with the p orbital of the adjacent nitrogen atoms. This scenario implies that the measured spin excitations are not fully localized at the transition metal.

The hours of work problem in five major industries

Includes bibliographical references.

Metal-free catalysts derived from lignin for efficient wet peroxide oxidation

In this work, a wheat and hemp lignin (Sarkanda, Granit S.A.) has been used as raw material for the development of metal-free activated carbons. These materials were tested in the catalytic wet peroxide oxidation (CWPO) of 4-nitrophenol (4-NP; 5 g L-1) during 24 h experiments conducted at relatively mild operating conditions (p = 1 atm, t = 50 °C, pH = 3, catalyst load = 2.5 g L-1 and [H2O2]0 = 17.8 g L-1). First, the lignin was carbonized under N2 atmosphere followed by the activation of the obtained non-porous carbon (LG) under air atmosphere at different temperatures (150 to 350 ºC), leading to the generation of significant porosity.

Nenhuma ferida fala por si mesma. Sofrimento e estratégias de cura dos imigrantes por meio de práticas de ethnography-based art

Neste ensaio fotográfico, apresento “Woundscapes. Suffering, creativity and bare life”, uma exibição de arte baseada em etnografia, produzida de forma colaborativa por 11 antropólogos e artistas de diferentes países, cujo trabalho se concentra na reprodução de olhares e estereótipos pós-coloniais e de memórias individuais que são ligadas às respetivas dinâmicas diaspóricas e às estratégias de cura dos imigrantes no amplo Mercado terapêutico da Grande Lisboa.

The Criminalisation of Migration in Europe: A State-of-the-Art of the Academic Literature and Research. CEPS Liberty and Security in Europe No. 61, October 2013

In the last 30 years, a clear trend has come to define modern immigration law and policy. A set of seemingly disparate developments concerning the constant reinforcement of border controls, tightening of conditions of entry, expanding capacities for detention and deportation and the proliferation of criminal sanctions for migration offences, accompanied by an anxiety on the part of the press, public and political establishment regarding migrant criminality can now be seen to form a definitive shift in the European Union towards the so-called ‘criminalisation of migration’. This paper aims to provide an overview of the ‘state-of-the-art’ in the academic literature and EU research on criminalisation of migration in Europe. It analyses three key manifestations of the so-called ‘crimmigration’ trend: discursive criminalisation; the use of criminal law for migration management; and immigrant detention, focusing both on developments in domestic legislation of EU member states but also the increasing conflation of mobility, crime and security which has accompanied EU integration. By identifying the trends, synergies and gaps in the scholarly approaches dealing with the criminalisation of migration, the paper seeks to provide a framework for on-going research under Work Package 8 of the FIDUCIA project.

The Art of Enduring Contradictory Goals: Challenges in the Institutional Co‐construction of a ‘Good Death’

This paper focuses on the normative notion of ‘good death’, its practical relevance as a frame of reference for ‘death work’ procedures in institutional elder care in Switzerland and the ways in which it may be challenged within migrant ‘dying trajectories’. In contemporary palliative care, the concept of ‘good death’ focuses on the ideal of an autonomous dying person, cared for under a specialised biomedical authority. Transferred to the nursing home context, characterised by long-term basic care for the very old under conditions of scarce resources, the notion of ‘good death’ is broken down into ready-to-use, pragmatic elements of daily routines. At the same time, nursing homes are increasingly confronted with socially and culturally diversified populations. Based on ethnographic findings, we give insight into current practices of institutional ‘death work’ and tensions arising between contradicting notions of a ‘good death’, by referring to decision-making, life-prolonging measures, notions on food/feeding and the administration of sedative painkillers.

(Table 2) Trace element contents in ancient Black Sea sapropelic muds

The study of vertical distribution of Mo, V, Co, Ni, and Cu in mass of Black Sea sediments showed that maximum concentrations occur in sapropelic muds of ancient Black Sea deposits. A special study of sapropels samples showed a sufficiently clear correlation of Cu, Ni, Mo, and V contents with organic carbon contents; Co contents do not show such a correlation, but show one with contents of pyrite sulfur. A study of fractions of bitumen, free humic and fulvic acids showed that some part of metal contents in the sediments is bound with organic matter. It is shown that increased concentrations of trace elements in sapropels result from removing of dissolved metals from seawater by organic detritus during deposition on the bottom, in vivo concentration of metals in plankton organisms is of secondary importance.