Influence of organic matter in road deposited particulates in heavy metal accumulation and transport

The research study discussed in the paper investigated the influence of organic matter on heavy metal adsorption for different particle size ranges of build-up solids. Samples collected from road surfaces were assessed for organic matter content, mineral composition, particle size distribution and effective cation exchange capacity. It was found that the organic matter plays a key role in >75µm particles in the adsorption of Zinc, Lead, Nickel and Copper, which are generated by traffic activities. Clay forming minerals and metal oxides of Iron, Aluminium and Manganese was found to be important for heavy metal adsorption to <75µm particles. It was also found that heavy metals adsorbed to organic matter are strongly bound to particles and these metal ions will not be bio-available if the chemical quality of the media remains stable.

Poly[mu3-aqua-aqua(mu3-3,5-dinitrobenzoato-kO1:O3:O5)caesium]

In the structure of the title complex [Cs(C7H3N2O6)(H2O)2]n, the Cs salt of 3,5-dinitrobenzoic acid, the metal complex centres have have irregular CsO8 coordination, comprising two water molecules (one triply bridging, the other monodentate) and four O-donors from two nitro groups and one bridging carboxyl-O donor group from the ligand. Intra-unit O-H...O hydrogen-bonding interactions involving both water molecules are observed in the three-dimensional polymeric complex structure.

Current status and future prospects for cultured limbal tissue transplants in Australia and New Zealand

Cultured limbal tissue transplants have become widely used over the last decade as a treatment for limbal stem cell deficiency (LSCD). While the number of patients afflicted with LSCD in Australia and New Zealand is considered to be relatively low, the impact of this disease on quality of life is so severe that the potential efficacy of cultured transplants has necessitated investigation. We presently review the basic biology and experimental strategies associated with the use of cultured limbal tissue transplants in Australia and New Zealand. In doing so, we aim to encourage informed discussion on the issues required to advance the use of cultured limbal transplants in Australia and New Zealand. Moreover, we propose that a collaborative network could be established to maintain access to the technology in conjunction with a number of other existing and emerging treatments for eye diseases.

Beat phenomena in metal nanowires, and their implications for resonance-based elastic property measurements

The elastic properties of 1D nanostructures such as nanowires are often measured experimentally through actuation of the nanowire at its resonance frequency, and then relating the resonance frequency to the elastic stiffness using elementary beam theory. In the present work, we utilize large scale molecular dynamics simulations to report a novel beat phenomenon in [110]oriented Ag nanowires. The beat phenomenon is found to arise from the asymmetry of the lattice spacing in the orthogonal elementary directions of the [110] nanowire, i.e. the [-110] and [001] directions, which results in two different principal moments of inertia. Because of this, actuations imposed along any other direction are found to decompose into two orthogonal vibrational components based on the actuation angle relative to these two elementary directions, with this phenomenon being generalizable to <110> FCC nanowires of different materials (Cu, Au, Ni, Pd and Pt). The beat phenomenon is explained using a discrete moment of inertia model based on the hard sphere assumption, the model is utilized to show that surface effects enhance the beat phenomenon, while the effect is reduced with increasing nanowires cross-sectional size or aspect ratio. Most importantly, due to the existence of the beat phenomena, we demonstrate that in resonance experiments only a single frequency component is expected to be observed, particularly when the damping ratio is relatively large or very small. Furthermore, for a large range of actuation angles, the lower frequency is more likely to be detected than the higher one, which implies that experimental predictions of Young’s modulus obtained from resonance may in fact be under predictions. The present study therefore has significant implications for experimental interpretations of Young’s modulus as obtained via resonance testing.

Positive emotional experiences with portable interactive products

Positive emotions are central to human life and have implications to the overall quality of people's life (Fredrickson, 1998). This paper reports on positive experiences with two types of portable interactive devices (PIDs), specifically media/entertainment and medical/health devices. The study is based on a six-month longitudinal study exploring people's emotional experience and how PIDs mediate these experiences in everyday contexts. Previous findings by the authors (Gomez, Popovic & Blackler, 2011) presented four categories of activities including Feature, Functional, Mediation and Auxiliary activities and their relationship to emotional experience. The paper presents emotional experiences with specific activities reported with a focus on positive emotions. It concludes with a discussion of the findings on positive experiences and the implications for the future design of PIDs.

Battling in a virtual world: a proposal for increased copyright protection of multimedia products in Australia

This article discusses the adequacy of copyright protection afforded to multimedia products pursuant to the Copyright Act 1968 (Cth) and in response to international obligations. The paper critically evaluates the effect that the most recent amendments to the Copyright Act have had on the protection of copyright in multimedia products. An outline of some practical measures of protection available to copyright owners as alternatives or complements to the current statutory regime is provided, ultimately concluding that the current legislative protection is ineffective. The paper closes by considering possible future reform by way of statutory amendments to the Copyright Act aimed at increasing protection of copyright in multimedia products.

Basic education for offenders

ILLITERACY is now increasingly recognised as a serious social problem. UNESCO defines literacy in the following way :- "A person is literate when he has acquired the essential knowledge skills that enable him to engage in all those activities in which literacy is required for effective functioning in his group and community" This is in fact seeing the problem in terms of functional literacy. As the demands of an increasingly industrial society grow, more and more people who are functionally illiterate are appearing. Many do not have the functional skills required to enable them to apply for a job. This inability to obtain work is common among clients of the probation service. Literacy has become so important in our society, that to be unable to read and write causes great feeling of isolation, of being different and inferior, which often leads the illiterate to join a group where this deficiency is unknown and where he can gain some status. This is often a delinquent group.

Riding the tide of biopharming in Africa: Considerations for risk assessment

In the past few years, plant biotechnology has gone beyond traditional agricultural production of food, feed and fibre, and moved to address more complex contemporary health, social and industrial challenges. The new era involves production of novel pharmaceutical products, speciality and fine chemicals, phytoremediation and production of renewable energy resources to replace non-renewable fossil fuels. Plants have been shown to provide a genuine and low-cost alternative production system for high-value products. Currently, the principal plant-made products include antibodies, feed additives, vaccine antigens and hormones for human and animal health, and industrial proteins. Despite the unique advantages of scalability, cost and product safety, issues of politics, environmental impact, regulation and socioeconomics still limit the adoption of biopharmaceuticals, especially in the developing world. Plant-based production systems have further complicated biosafety, gene flow and environmental impact assessments with generally genetically modified plants, topics that are already partially understood. This article provides a background to biopharming, highlighting basic considerations for risk assessment and regulation in developing countries, with an emphasis on plant-based vaccine production in South Africa.

Briefing paper on eTextbooks and third party eLearning products and their implications for Australian university libraries

The briefing paper was commissioned by the Council of Australian University Librarians (CAUL) to examine the current picture and evolving role of electronic textbooks (eTextbooks) and third party eLearning products in the academic arena. The study reviews industry trends, identifies the major players and considers the different stakeholder perspectives of eTextbook adoption. Within the context of learning and teaching in the digital age, specific areas of research, policy and practice are highlighted to consider the implications that eTextbooks might have for universities in general and for university libraries in particular. An environmental scan focused on the analysis of current developments and the anticipated future directions of digital learning resources in Australia, as well as in other major English speaking countries such as the United Kingdom and the United States. This research guided the development of key interview questions aimed at examining, at a deeper level, diverse stakeholder perspectives about the roles university libraries can play in the adoption of digital learning content.

Innovative Products Focus Group Report 2012. Brisbane: QUT

This report presents the results of Phase 3 of the Innovative Road Products Project: National Focus Groups. The groups developed solutions to address the most important obstacles constraining the adoption of innovative products in Australian road construction projects. The Innovative Products Survey, the major Project deliverable in 2011, and the largest innovation survey ever undertaken in the Australian road consutrction industry, results in the identification of key obstacles constraining the adoption of innovative products on road projects.

Innovative Products Survey Report

This report presents the results of the 2011 Australian road and bridge product innovation survey, the largest survey of its kind ever undertaken. The survey sample was defined as key organisations involved in the Australian road and bridge construction industry. The survey focused on four sectors across the road and bridge product supply chain: suppliers (comprising manufacturers and distributors), consultants (primarily engineering consultant firms), contractors (comprising head and trade contractors and subcontractors) and clients (state government road agencies). The sample comprised the four sectors in Queensland, New South Wales and Victoria.

Innovative Products Project: Background Study

The Australian Research Council (ARC) Innovative Products Project aims to facilitate project innovation by exploring means to improve the diffusion of innovative products to road and bridge projects. It adopts a highly novel approach to achieve this end, developing three different ways of viewing the problem: (1) as a relational governance issue, (2) as an absorptive capacity issue and (3) as a knowlege intermediation issue. This report presents teh results of teh first phase of a three phase fieldwork program.

The Quattrocento as a Waltz

Poem

A Reliability test system for educational purposes-basic data

The IEEE Subcommittee on the Application of Probability Methods (APM) published the IEEE Reliability Test System (RTS) [1] in 1979. This system provides a consistent and generally acceptable set of data that can be used both in generation capacity and in composite system reliability evaluation [2,3]. The test system provides a basis for the comparison of results obtained by different people using different methods. Prior to its publication, there was no general agreement on either the system or the data that should be used to demonstrate or test various techniques developed to conduct reliability studies. Development of reliability assessment techniques and programs are very dependent on the intent behind the development as the experience of one power utility with their system may be quite different from that of another utility. The development and the utilization of a reliability program are, therefore, greatly influenced by the experience of a utlity and the intent of the system manager, planner and designer conducting the reliability studies. The IEEE-RTS has proved to be extremely valuable in highlighting and comparing the capabilities (or incapabilities) of programs used in reliability studies, the differences in the perception of various power utilities and the differences in the solution techniques. The IEEE-RTS contains a reasonably large power network which can be difficult to use for initial studies in an educational environment.