Entwicklung von computergestützten Hangstabilitätsmodellen zur Erstellung einer Gefahrenhinweiskarte für die Region Rheinhessen

Das Ziel der Arbeit war die Entwicklung computergestützter Methoden zur Erstellung einer Gefahrenhinweiskarte für die Region Rheinhessen, zur Minimierung der Hangrutschungsgefährdung. Dazu wurde mit Hilfe zweier statistischer Verfahren (Diskriminanzanalyse, Lo­gistische Regression) und einer Methode aus dem Bereich der Künstlichen Intelligenz (Fuzzy Logik) versucht, die potentielle Gefährdung auch solcher Hänge zu klassifizieren, die bis heute noch nicht durch Massenbewegungen aufgefallen sind. Da ingenieurgeologische und geotechnische Hanguntersuchungen aus Zeit und Kostengründen im regionalen Maßstab nicht möglich sind, wurde auf punktuell vorhandene Datenbestände zu einzelnen Rut­schungen des Winters 1981/82, die in einer Rutschungsdatenbank zu­sammengefaßt sind, zurückgegriffen, wobei die daraus gewonnenen Erkenntnisse über Prozeßmechanismen und auslösende Faktoren genutzt und in das jeweilige Modell integriert wurden. Flächenhafte Daten (Lithologie, Hangneigung, Landnutzung, etc.), die für die Berechnung der Hangstabilität notwendig sind, wurden durch Fernerkundungsmethoden, dem Digitalisieren von Karten und der Auswertung von Digitalen Geländemodellen (Reliefanalyse) gewonnen. Für eine weiterführende Untersuchung von einzelnen, als rutschgefährdet klassifi­zierten Bereichen der Gefahrenhinweiskarte, wurde am Beispiel eines Testgebietes, eine auf dem infinite-slope-stability Modell aufbauende Me­thode untersucht, die im Maßstabsbereich von Grundkarten (1:5000) auch geotechnische und hydrogeologische Parameter berücksichtigt und damit eine genauere, der jeweiligen klimatischen Situation angepaßte, Gefahrenabschätzung ermöglicht.

Sintesi di polimeri funzionali per la catalisi asimmetrica

In recent years, the asymmetric organocatalysis has been recognized as an independent area of synthetic chemistry, where the goal is the preparation of any chiral molecule in an efficient, rapid, and stereoselective manner. In this context we have synthesized macromolecular catalysts soluble in the reaction conditions and that can finally recovered by simple precipitation and subsequent filtration. In particular different active compounds (9-epi-NH2 hyidroquinine and β –isocupreidine) have been linked to the terminal group of the main chain polyethylene glycol monomethyl ether (PEG-5000). The macromolecular catalysts have been tested in different reactions and the results have been compared with those of the correspondent low molecular compounds.

Le aziende vitivinicole: da “machines à produire” a elementi di attrazione nel paesaggio. Proposte e criteri progettuali per l’efficienza funzionale e la qualità architettonica ed ambientale delle strutture ed infrastrutture della trasformazione enologica.

La ricerca ha per oggetto la messa a punto e applicazione di un approccio metaprogettuale finalizzato alla definizione di criteri di qualità architettonica e paesaggistica nella progettazione di aziende vitivinicole medio-piccole, che effettuano la trasformazione della materia prima, prevalentemente di propria produzione. L’analisi della filiera vitivinicola, della letteratura scientifica, della normativa di settore, di esempi di “architetture del vino eccellenti” hanno esplicitato come prevalentemente vengano indagate cantine industriali ed aspetti connessi con l'innovazione tecnologica delle attrezzature. Soluzioni costruttive e tecnologiche finalizzate alla qualità architettonica ed ambientale, attuali dinamiche riguardanti il turismo enogastronomico, nuove funzionalità aziendali, problematiche legate alla sostenibilità dell’intervento risultano ancora poco esplorate, specialmente con riferimento a piccole e medie aziende vitivinicole. Assunto a riferimento il territorio ed il sistema costruito del Nuovo Circondario Imolese (areale rappresentativo per vocazione ed espressione produttiva del comparto vitivinicolo emiliano-romagnolo) è stato identificato un campione di aziende con produzioni annue non superiori ai 5000 hl. Le analisi svolte sul campione hanno permesso di determinare: modalità di aggregazione funzionale degli spazi costruiti, relazioni esistenti con il paesaggio, aspetti distributivi e materico-costruttivi, dimensioni di massima dei locali funzionali alla produzione. Il caso studio relativo alla riqualificazione di un’azienda rappresentativa del comparto è stato utilizzato per la messa a punto e sperimentazione di criteri di progettazione guidati da valutazioni relative alle prestazioni energetiche, alla qualità architettonica e alla sostenibilità ambientale, economica e paesaggistica. L'analisi costi-benefici (pur non considerando le ricadute positive in termini di benessere degli occupanti ed il guadagno della collettività in termini di danni collegati all’inquinamento che vengono evitati in architetture progettate per garantire qualità ambientale interna ed efficienza energetica) ha esplicitato il ritorno in pochi anni dell’investimento proposto, nonostante gli ancora elevati costi di materiali di qualità e dei componenti per il corretto controllo climatico delle costruzioni.

Algoritmi per la distribuzione dei dati in reti non cablate di sensori

Le reti di sensori non cablate producono una grande quantità di informazioni sotto forma di flusso continuo di dati, provenienti da una certa area fisica. Individualmente, ogni sensore è autonomo, dotato di batteria limitata e possiede una piccola antenna per la comunicazione; collettivamente, i sensori cooperano su un’ area più o meno vasta per far giungere i dati gene- rati ad un unità centrale. Poiché la sostituzione delle batterie è spesso un operazione troppo costosa o inattuabile, l’efficienza energetica è considerata una metrica prioritaria durante la progettazione delle reti di sensori non cablate. Si richiede non solo di ridurre le richieste energetiche di ogni singolo nodo, ma anche di massimizzare il tempo di vita dell’intera rete, considerando i costi di comunicazione tra sensori. Ciò ha portato allo studio di come rimuo- vere le inefficienze energetiche sotto ogni aspetto: dalla piattaforma hardware, al software di base, ai protocolli di comunicazione al software applicativo. Nella tesi è illustrata una tecnica per il risparmio energetico che consiste nell’applicare memorie fisiche ad alcuni nodi della rete, in modo da accumulare in esse porzioni dei dati ge- nerati; successivamente le informazioni possono essere recuperate dall’unità centrale tramite interrogazioni. Questo permette di ridurre il numero di dati trasmessi, e conseguentemente diminuire l’assorbimento energetico della rete. Scopo della presente tesi è individuare algo- ritmi per determinare la disposizione ottima delle memorie tra i nodi.

Petrogenesis of dunite, wehrlite and websterite xenoliths from Kimberley, South Africa: Origin as mantle peridotites of cumulates

Dunite, wehrlite and websterite xenoliths occur amongst a large abundance of mantle xenoliths in kimberlites of the Kimberley cluster in South Africa. Up to know they have mostly been neglected. On the basis of texture, major and trace elements, oxygen isotopes as well as Re-Os isotope characteristics, they can be subdivided into two groups. A coarse-grained mantle peridotite group, comprising dunite, wehrlite and websterite xenoliths, that are similar to fertile peridotites and represent upper mantle assemblages that are differently influenced by mantle metasomatism. And a cumulate group, containing fine-grained Fe-rich dunite xenoliths that represent cumulates of flood basalt magmatism related to ~183 Ma Karoo and ~2.7 Ga Ventersdorp events in southern Africa. Dunite, wehrlite and websterite xenoliths have preserved a complex history of melt depletion and metasomatic re-enrichment events, which gives information about the different re-enrichment stages of the subcratonic lithospheric mantle and the spatial differences within the Kaapvaal craton upper mantle. Websterite xenoliths comprise orthopyroxene (40-85 Vol. %), clinopyroxene (5-42 Vol. %), garnet (4-10 Vol. %) and subordinately olivine, while dunite and wehrlite xenoliths contain predominantly olivine (65-100 Vol %) and subordinately orthopyroxene, clinopyroxene and garnet. High melt depletion and a dunitic to harzburgitic protolith composition are reflected by high forsterite (Fo90-92) and high olivine NiO contents (2800-5000 ppm) and high orthopyroxene Mg# (Mg/(Mg+Fe)) of 0.91-0.93. Re-depletion ages of predominantly 2.9 Ga reflect a minimum age of melt depletion. Melt depletion ceased in conjunction with collision of the Kimberley block with the Witwatersrand block ~2.9 Ga ago. Subduction related re-fertilisation of the previously depleted mantle xenoliths is documented by i) amoeboid textured orthopyroxene, clinopyroxene and garnet, which crystallized in schlieren along olivine grain boundaries, ii) high whole-rock SiO2, Al2O3, CaO, TiO2, FeO contents, iii) low oxygen isotope ratios in clinopyroxene and garnet of 4.8-5.4 ‰ and 4.7-5.3 ‰, respectively and iv) trace element compositions of wehrlitic clinopyroxene and garnet in equilibrium with high-pressure partial melts of eclogite. Trace element disequilibrium of orthopyroxene with clinopyroxene and garnet indicates a separate origin for orthopyroxene, on one side as primary mantle orthopyroxene in dunite and wehrlite xenoliths and on the other side as reaction product with Si-rich melts produced by partial melting of eclogite. This reaction triggered replacement of olivine by orthopyroxene in the surrounding mantle and produced the typical Si-rich composition of Kaapvaal mantle peridotites. Partial melting of eclogite at higher temperatures produced a second metasomatic melt with lower SiO2, but higher Al2O3, CaO, FeO, Ti, Zr, Hf and a low oxygen isotope ratio. This melt triggered clinopyroxene and locally garnet and rutile crystallization in percolation veins, replacing olivine and orthopyroxene in the Kaapvaal upper mantle. Additionally, websterite xenoliths have experienced late stage cryptic metasomatism by the host kimberlite melt, changing the trace element composition of clinopyroxene, orthopyroxene and garnet to different extent. Hence websterite and most fertile lherzolite xenoliths have experienced three metasomatic events: i) reaction with high-Si melt, ii) percolation of subduction related silica melt with lower SiO2 content and iii) cryptic metasomatism by kimberlite. In contrast, dunite and wehrlite xenoliths have only experienced the second metasomatic event. They represent mantle lithologies further away from metasomatising agents. The Fe-rich dunites comprise olivine neoblasts with subordinate olivine porphyroclasts and parallel-orientated needles of ilmenite, which may enclose spinel. The lower forsterite and NiO contents of olivine in Fe-rich dunites compared to mantle peridotite xenoliths (Fo87-89 vs. Fo93-95 and 1300-2800ppm vs. 2200-3900 ppm, respectively), rules out a restitic origin. Cr-rich spinels are remnants of the original cumulate mineralogy that survived a late stage metasomatic overprint related to the production of the host kimberlite, producing ilmenite and phlogopite in some samples. Olivine porphyroclasts and neoblasts have different trace element compositions, the latter having high Ti, V, Cr and Ni and low Zn, Zr and Nb contents, indicating contrasting origins for neoblasts and porphyroclasts. The dunites have high 187Os/188Os ratios (0.11-0.15) indicating young (Phanerozoic) model ages for most samples, whereas three samples show isotopic mixtures between Phanerozoic neoblasts and ancient porphyroclastic material. Most Fe-rich dunite xenoliths can be interpreted as cumulates of fractional crystallization of Karoo magmatism, whereas the porphyroclasts are interpreted to be remnants from the much earlier Archaean Ventersdorp magmatism.

Strategies to identify and further characterize novel and known genes involved in regulation of skeletogenesis

372 osteochondrodysplasias and genetically determined dysostoses were reported in 2007 [Superti-Furga and Unger, 2007]. For 215 of these conditions, an association with one or more genes can be stated, while the molecular changes for the remaining syndromes remain illusive to date. Thus, the present dissertation aims at the identification of novel genes involved in processes regarding cartilage/ bone formation, growth, differentiation and homeostasis, which may serve as candidate genes for the above mentioned conditions. Two different approaches were undertaken. Firstly, a high throughput EST sequencing project from a human fetal cartilage library was performed to identify novel genes in early skeletal development (20th week of gestation until 2nd year of life) that could be investigated as potential candidate genes. 5000 EST sequences were generated and analyzed representing 1573 individual transcripts, corresponding to known (1400) and to novel, yet uncharacterized genes (173). About 7% of the proteins were already described in cartilage/ bone development or homeostasis, showing that the generated library is tissue specific. The remaining profile of this library was compared to previously published libraries from different time points (8th–12th, 18th–20th week and adult human cartilage) that also showed a similar distribution, reflecting the quality of the presented library analyzed. Furthermore, three potential candidate genes (LRRC59, CRELD2, ZNF577) were further investigated and their potential involvement in skeletogenesis was discussed. Secondly, a disease-orientated approach was undertaken to identify downstream targets of LMX1B, the gene causing Nail-Patella syndrome (NPS), and to investigate similar conditions. Like NPS, Genitopatellar syndrome (GPS) is characterized by aplasia or hypoplasia of the patella and renal anomalies. Therefore, six GPS patients were enrolled in a study to investigate the molecular changes responsible for this relatively rare disease. A 3.07 Mb deletion including LMX1B and NR5A1 (SF1) was found in one female patient that showed features of both NPS and GPS and investigations revealed a 46,XY karyotype and ovotestes indicating true hermaphroditism. The microdeletion was not seen in any of the five other patients with GPS features only, but a potential regulatory element between the two genes cannot be ruled out yet. Since Lmx1b is expressed in the dorsal limb bud and in podocytes, proteomic approaches and expression profiling were performed with murine material of the limbs and the kidneys to identify its downstream targets. After 2D-gel electrophoresis with protein extracts from E13.5 fore limb buds and newborn kidneys of Lmx1b wild type and knock-out mice and mass spectrometry analysis, only two proteins, agrin and carbonic anhydrase 2, remained of interest, but further analysis of the two genes did not show a transcriptional down regulation by Lmx1b. The focus was switched to expression profiles and RNA from newborn Lmx1b wild type and knock-out kidneys was compared by microarray analysis. Potential Lmx1b targets were almost impossible to study, because of the early death of Lmx1b deficient mice, when the glomeruli, containing podocytes, are still immature. Because Lmx1b is also expressed during limb development, RNA from wild type and knock-out Lmx1b E11.5 fore limb buds was investigated by microarray, revealing four potential Lmx1b downstream targets: neuropilin 2, single-stranded DNA binding protein 2, peroxisome proliferative activated receptor, gamma, co-activator 1 alpha, and short stature homeobox 2. Whole mount in situ hybridization strengthened a potential down regulation of neuropilin 2 by Lmx1b, but further investigations including in situ hybridization and protein-protein interaction studies will be needed.

Funktionelle Rolle von SNARE-Proteinen bei der Myelinisierung

Die Hauptfunktion der Oligodendrozyten im zentralen Nervensystem ist die Myelinisierung. Dabei umwickelt die Zelle mit Ausläufern ihrer Plasmamembran mehrmals die Axone. In den Phasen der aktiven Myelinisierung produziert ein Oligodendrozyt eine Fläche von 5000-50000 µm2 Myelin pro Tag, wobei große Mengen der Myelinkomponenten über vesikulären Transport zur Zelloberfläche transportiert werden müssen. Die Fusion der Vesikel mit ihrer Zielmembran wird duch SNARE-Proteine (soluble N-ethylmaleimide-sensitive-factor attachment protein receptor proteins) kontrolliert, die durch spezifische Interaktionen zwischen R- (Vesikel) und Q- (Zielmembran) SNAREs auch zur Spezifität der Fusion beitragen. Um die SNAREs den oligodendroglialen Transportrouten zuzuordnen, wurde deren Expression, Regulation und subzelluläre Lokalisation in primären Oligodendrozyten, in Oli-neu Zellen und im Myelin untersucht. Die Plasmamembran-Q-SNAREs Syntaxin 3, Syntaxin 4 und SNAP23, sowie das endosomale R-SNAREs VAMP3 zeigten eine zunehmende Expression im Verlauf der Oligodendrozytenreifung, die Expression von SNAP29 hingegen verminderte sich. Zudem akkumulierten die SNARE-Proteine Syntaxin 2, Syntaxin 3, Syntaxin 4 und VAMP7 im adulten Myelin, was für ihre Beteiligung an der Myelinisierung spricht. Co-Immunpräzipitationen ergaben u.a. Interaktionen zwischen den SNARE-Proteinen VAMP3 (R), Syntaxin 4 (Qa) und SNAP23 (Qbc). Anhand der beschriebenen Analyse konnten die SNARE-Proteine den oligodendroglialen Transportwegen zugeordnet werden. Immunzytochemische Analysen zeigten, dass das Hauptmyelinprotein PLP mit dem R-SNARE des Recycling Endosoms VAMP3, und mit dem spät endosomal, lysosomalen SNARE VAMP7 kolokalisiert. Um deren Rolle im PLP-Transport zu untersuchen, wurden verschiedene VAMP3- bzw. VAMP7-Silencing-Experimente durchgeführt. In beiden Fällen führte dies zu einer reduzierten Menge an PLP an der Zelloberfläche. Die Ergebnisse lassen somit auf zwei unabhängige Transportwege für PLP zur Plasmamembran von Oligodendrozyten schließen. Der VAMP7-abhängige PLP-Transport wurde zusätzlich in vivo in AP3-defizienten Mäusen, welche VAMP7 fehlsortieren, überprüft. Die Gehirne der mutanten Mäuse enthielten weniger Myelin, das isolierte Myelin enthielt weniger PLP und CNP. VAMP7 scheint also bei der Myelinisierung die Fusion von PLP- und CNP-enthaltenden Vesikeln mit der Myelinmembran zu vermitteln.

Interactions of G-quadruplex binders and Topoisomerase I inhibitors in cancer cells

Top1-DNA cleavage complexes (Top1ccs) trigger an accumulation of antisense RNAPII transcripts specifically at active divergent CpG-island promoters in a replication independent and Top1 dependent manner, leading to transcription-dependent genome instability and altered transcription regulation. Using different cancer cell lines of colon and osteo origins, we show that they display different sensitivity to CPT and G4 binder that is independent from Top1 level. To look at the interactions between Top1 and G4, we show that co-treatment with G4 binders potentiate the cell cytotoxicity of CPT regardless of the treatment sequences. Potentiation is indicated by a reduced inhibition concentration (IC50) with a more profound cytotoxicity in CPT-resistant cell lines, HCT15 and U2OS, hence, indicating an interaction between Top1inhibitor and G4 binders. Moreover, computational analysis confirmed the present of G4 motifs in genes with CPT-induced antisense transcription. G4 motifs are present mostly 5000 bp upstream from transcription start site and notably lower in genes. Comparisons between genes with no antisense transcription and genes with antisense transcription show that G4 motifs in this region are notably lower in the genes with antisense transcripts. Since CPT increases negative supercoils at promoters of intermediate activity, the formation of G4 is also increased in CPT-treated cells. Suprisingly, formation of G4 is regulated in parallel to the transient stabilization of R-loops, indicating a role in response to CPT-induced stress. G4 formation is highly elevated in Pyridostatin treated cells, which previous study shows increased formation of γH2Ax foci. This effect is also seen in the CPT-resistant cell lines, HCT15, indicating that the formation is a general event in response to CPT. We also show that R-loop formation is greatly increased in Pyridostatin treated cells. In order to study the role of R-loops and G4 structures in Top1cc-dependant repair pathway, we inhibited tyrosyl-phosphodiestrase 1 (TDP-1) using a TDP-1 inhibitor.

Synthese und Charakterisierung zylindrischer Poly(2-oxazolin)bürsten als Nanocarrier für Drug Delivery Systeme

Inspiriert durch natürlich vorkommende Peptide, sind Poly(2-oxazoline) vielversprechende Kandidaten für Anwendungen in Bereichen des kontrollierten Wirkstoff- bzw. Gentransportes, wie die moderne Biomedizin dies fordert. Da Polyoxazoline als strukturisomere Amide von natürlichen Polypeptiden aufgefasst werden können, zeigen diese synthetischen Polymere in direktem Vergleich erhebliche Vorteile etwa hinsichtlich Zytotoxizät und Effizienz, was wesentlich dazu beitragen kann, aktuelle Hürden biomedizinischer Fragestellungen hinsichtlich Transport und Targeting zu überwinden. Darüber hinaus sollten zylindrische Polymerbürsten aufgrund ihrer molekularen, architekturbedingten Formanisotropie und jüngsten Ergebnissen insbesondere zur formabhängigen Endozytose sehr aussichtsreiche Kandidaten für den Einsatz zum Wirkstofftransport sein.rnrnDie vorliegende Arbeit widmete sich deshalb der Synthese und Charakterisierung von biokompatiblen zylindrischen Poly(2-oxazolin)bürsten als potentielle Nanotransporter von Wirkstoffen, Biomolekülen oder genetischem Material. Als Monomer wurde zunächst 2-Isopropyloxazolin gewählt, da das Polymer eine Phasenübergangstemperatur von 37 °C besitzt, was für Konjugatsynthesen wie auch diverse biomedizinische Applikationen interessant sein kann. Durch terminierende Methacrylamid Funktionalisierung der lebenden kationischen Oxazolinpolymerisation bzw. nachfolgende Endgruppen Transferreaktionen sind Makromonomere im Bereich 1000-5000 g/mol zugänglich. Erstmals gelang es so 2-Oxazolin basierte, hochmolekulare zylindrische Bürsten mit Konturlängen im Bereich von 250 nm mittels „Grafting Through“ Technik in freier radikalischer Polymerisation herzustellen.rnrnAusgehend von der entwickelten Syntheseroute konnten so neben Homo- und Blockcopolymerbürsten von 2-Ethyl-2-oxazolin und 2-Isopropyl-2-oxazolin auch Bürstenmoleküle aus statistischen Copolymeren von 2-Ethyl-2-oxazolin und unsubstituiertem 2-Oxazolin hergestellt werden. Während letztere die Einführung kationischer Gruppen durch selektivere Abspaltmethoden der Formylreste erlauben und so etwa DNA/RNA Komplexierungen ermöglichen können, bietet andererseits der in dieser Arbeit erstmalig demonstrierte Einsatz Azid-funktionalisierter Initiatoren zur kationischen Oxazolinpolymerisation unter Beibehaltung aller anderen sonstigen Reaktionsschritte auch die Möglichkeit der Synthese Azid-Endgruppen-funktionalisierter Makromonomere. Die „Grafting Through“ Methodik der freien radikalischen Makromonomer Polymerisation ist selbst bei diesen funktionalisierten Systemen von großem Vorteil, erlaubt sie auch hier den Zugang zu hochmolekularen Substraten mit einem Pfropfungs- bzw. Funktionalisierungsgrad von 100 %, da jede Seitenkette dieser zylindrischen Bürsten die aussenliegende, und damit sterisch leichter zugängliche funktionale Gruppe trägt. Dabei gelang es die Syntheseroute so zu gestalten, dass es möglich war alle vorgestellten Polymerbürsten mittels statischer und dynamischer Lichtstreuung hinsichtlich absoluter Molmasse und molekularer Dimension zu charakterisieren.rnIn weitereren Reaktionen konnten dann reaktive Fluoreszenzfarbstoffe mit Hilfe kupferfreier 1,3 dipolarerer Addition (kupferfreie „Click-Chemie“) an die Azid-funktionalisierten Polymerbürsten angebunden werden, so dass eine wesentliche Voraussetzung für die Detektion in in vivo und in vitro Experimenten erfüllt werden kann. Darüber hinaus gelingt die quantitative polymeranaloge Umsetzung der Azid- zu Aminogruppen durch eine polymeranalog geführte Reduktion nach Staudinger; damit können an diesen Systemen auch etablierte Konjugationstechniken an Aminogruppen durchgeführt werden. Zudem erlauben die Aminogruppen-haltigen Polymerbürsten durch Protonierung schon bei physiologischem pH die Komplexierung von DNA oder RNA. rnrnErste Lichtstreumessungen in Blutserum zeigen im Falle der kationischen Aminogruppen tragenden Polymerbürsten zwar Aggregation, was aber durch entsprechende Umsetzung nach Konjugation wahrscheinlich unterdrückt werden kann, zeigen doch die entsprechenden Precursorpolymerbürsten mit Azidgruppen in Serum keinerlei Aggregation.rnrnZellaufnahmestudien in dendritische Zellen zeigen nur im Falle einer Azid-funktionalisierten Poly(2-isopropyl-2-oxazolin)bürste eine unspezifische Aufnahme. Die hydrophileren Poly(2-oxazolin)bürsten weise keine unspezifische Aufnahme auf, was eine wichtige Anfoderung für die Verwendung als Polymercarrier in der Krebsimmuntherapie ist.rn

Plasmonic nanoparticles as sensors : a novel approach to quantify adsorption and diffusion kinetics

Biosensors find wide application in clinical diagnostics, bioprocess control and environmental monitoring. They should not only show high specificity and reproducibility but also a high sensitivity and stability of the signal. Therefore, I introduce a novel sensor technology based on plasmonic nanoparticles which overcomes both of these limitations. Plasmonic nanoparticles exhibit strong absorption and scattering in the visible and near-infrared spectral range. The plasmon resonance, the collective coherent oscillation mode of the conduction band electrons against the positively charged ionic lattice, is sensitive to the local environment of the particle. I monitor these changes in the resonance wavelength by a new dark-field spectroscopy technique. Due to a strong light source and a highly sensitive detector a temporal resolution in the microsecond regime is possible in combination with a high spectral stability. This opens a window to investigate dynamics on the molecular level and to gain knowledge about fundamental biological processes.rnFirst, I investigate adsorption at the non-equilibrium as well as at the equilibrium state. I show the temporal evolution of single adsorption events of fibrinogen on the surface of the sensor on a millisecond timescale. Fibrinogen is a blood plasma protein with a unique shape that plays a central role in blood coagulation and is always involved in cell-biomaterial interactions. Further, I monitor equilibrium coverage fluctuations of sodium dodecyl sulfate and demonstrate a new approach to quantify the characteristic rate constants which is independent of mass transfer interference and long term drifts of the measured signal. This method has been investigated theoretically by Monte-Carlo simulations but so far there has been no sensor technology with a sufficient signal-to-noise ratio.rnSecond, I apply plasmonic nanoparticles as sensors for the determination of diffusion coefficients. Thereby, the sensing volume of a single, immobilized nanorod is used as detection volume. When a diffusing particle enters the detection volume a shift in the resonance wavelength is introduced. As no labeling of the analyte is necessary the hydrodynamic radius and thus the diffusion properties are not altered and can be studied in their natural form. In comparison to the conventional Fluorescence Correlation Spectroscopy technique a volume reduction by a factor of 5000-10000 is reached.

Titanate-based paraelectric glass-ceramics for applications in GHz electronics

Das Gebiet der drahtlosen Kommunikationsanwendungen befindet sich in einem permanenten Entwicklungsprozess (Mobilfunkstandards: GSM/UMTS/LTE/5G, glo-bale Navigationssatellitensysteme (GNSS): GPS, GLONASS, Galileo, Beidou) zu immer höheren Datenraten und zunehmender Miniaturisierung, woraus ein hoher Bedarf für neue, optimierte Hochfrequenzmaterialien resultiert. Diese Entwicklung zeigt sich besonders in den letzten Jahren in der zunehmenden Entwicklung und Anzahl von Smartphones, welche verschiedene Technologien mit unterschiedlichen Arbeitsfrequenzen innerhalb eines Geräts kombinieren (data: 1G-4G, GPS, WLAN, Bluetooth). Die für zukünftige Technologien (z.B. 5G) benötigte Performance-steigerung kann durch die Verwendung von auf MIMO basierenden Antennensystemen realisiert werden (multiple-input & multiple-output, gesteuerte Kombination von mehreren Antennen) für welche auf dielectric Loading basierende Technologien als eine der vielversprechendsten Implementierungslösungen angesehen werden. rnDas Ziel dieser Arbeit war die Entwicklung einer geeigneten paraelektrischen Glaskeramik ($varepsilon_{r}$ > 20, $Qf$ > 5000 GHz, |$tau_f$| < 20 ppm/K; im GHz Frequenzbe-reich) im $mathrm{La_{2}O_{3}}$-$mathrm{TiO_{2}}$-$mathrm{SiO_{2}}$-$mathrm{B_{2}O_{3}}$-System für auf dielectric Loading basierende Mobilfunkkommunikationstechnologien als Alternative zu existierenden kommerziell genutzten Sinterkeramiken. Der Fokus lag hierbei auf der Frage, wie die makroskopi-schen dielektrischen Eigenschaften der Glaskeramik mit ihrer Mikrostruktur korreliert bzw. modifiziert werden können. Es konnte gezeigt werden, dass die dielektrischen Materialanforderungen durch das untersuchte System erfüllt werden und dass auf Glaskeramik basierende Dielektrika weitere vorteilhafte nichtelektro-nische Eigenschaften gegenüber gesinterten Keramiken besitzen, womit dielektrische Glaskeramiken durchaus als geeignete Alternative angesehen werden können. rnEin stabiles Grünglas mit minimalen Glasbildneranteil wurde entwickelt und die chemische Zusammensetzung bezüglich Entglasung und Redoxinstabilitäten optimiert. Geeignete Dotierungen für dielektrisch verlustarme $mathrm{TiO_{2}}$-haltige Glaskeramiken wurden identifiziert.rnDer Einfluss der Schmelzbedingungen auf die Keimbildung wurde untersucht und der Keramisierungsprozess auf einen maximalen Anteil der gewünschten Kristallphasen optimiert um optimale dielektrische Eigenschaften zu erhalten. Die mikroskopische Struktur der Glaskeramiken wurde analysiert und ihr Einfluss auf die makroskopischen dielektrischen Eigenschaften bestimmt. Die Hochfrequenzverlustmechanismen wurden untersucht und Antennen-Prototypenserien wurden analysiert um die Eignung von auf Glaskeramik basierenden Dielektrika für die Verwendung in dielectric Loading Anwendungen zu zeigen.

A river runs through it - ancient DNA data on the neolithic populations of the Great Hungarian Plain

This thesis was part of a multidisciplinary research project funded by the German Research Foundation (“Bevölkerungsgeschichte des Karpatenbeckens in der Jungsteinzeit und ihr Einfluss auf die Besiedlung Mitteleuropas”, grant no. Al 287/10-1) aimed at elucidating the population history of the Carpathian Basin during the Neolithic. The Carpathian Basin was an important waypoint on the spread of the Neolithic from southeastern to central Europe. On the Great Hungarian Plain (Alföld), the first farming communities appeared around 6000 cal BC. They belonged to the Körös culture, which derived from the Starčevo-Körös-Criş complex in the northern Balkans. Around 5600 cal BC the Alföld-Linearbandkeramik (ALBK), so called due to its stylistic similarities with the Transdanubian and central European LBK, emerged in the northwestern Alföld. Following a short “classical phase”, the ALBK split into several regional subgroups during its later stages, but did not expand beyond the Great Hungarian Plain. Marking the beginning of the late Neolithic period, the Tisza culture first appeared in the southern Alföld around 5000 cal BC and subsequently spread into the central and northern Alföld. Together with the Herpály and Csőszhalom groups it was an integral part of the late Neolithic cultural landscape of the Alföld. Up until now, the Neolithic cultural succession on the Alföld has been almost exclusively studied from an archaeological point of view, while very little is known about the population genetic processes during this time period. The aim of this thesis was to perform ancient DNA (aDNA) analyses on human samples from the Alföld Neolithic and analyse the resulting mitochondrial population data to address the following questions: is there population continuity between the Central European Mesolithic hunter-gatherer metapopulation and the first farming communities on the Alföld? Is there genetic continuity from the early to the late Neolithic? Are there genetic as well as cultural differences between the regional groups of the ALBK? Additionally, the relationships between the Alföld and the neighbouring Transdanubian Neolithic as well as other European early farming communities were evaluated to gain insights into the genetic affinities of the Alföld Neolithic in a larger geographic context. 320 individuals were analysed for this study; reproducible mitochondrial haplogroup information (HVS-I and/or SNP data) could be obtained from 242 Neolithic individuals. According to the analyses, population continuity between hunter-gatherers and the Neolithic cultures of the Alföld can be excluded at any stage of the Neolithic. In contrast, there is strong evidence for population continuity from the early to the late Neolithic. All cultural groups on the Alföld were heavily shaped by the genetic substrate introduced into the Carpathian Basin during the early Neolithic by the Körös and Starčevo cultures. Accordingly, genetic differentiation between regional groups of the ALBK is not very pronounced. The Alföld cultures are furthermore genetically highly similar to the Transdanubian Neolithic cultures, probably due to common ancestry. In the wider European context, the Alföld Neolithic cultures also highly similar to the central European LBK, while they differ markedly from contemporaneous populations of the Iberian Peninsula and the Ukraine. Thus, the Körös culture, the ALBK and the Tisza culture can be regarded as part of a “genetic continuum” that links the Neolithic Carpathian Basin to central Europe and likely has its roots in the Starčevo -Körös-Criş complex of the northern Balkans.

Studio della stabilita spazio-temporale di G: modello di laboratorio di un apparato per sonde interplanetarie

L'isolamento gravitazionale delle sonde dello spazio profondo durante le loro fasi di crociera ed i loro esigui livelli di vibrazioni, le rendono la migliore collocazione possibile per mini-laboratori automatici di fisica fondamentale da installare su di esse come strumenti scientifici. Date le note difficoltà di misurazione della costante di gravitazione universale, probabilmente dovute alla collocazione terrestre dei laboratori, si propone di dedicare un mini-laboratorio alla misurazione del valore locale ed istantaneo della costante G ed alla sua stabilità spazio-temporale durante il moto della sonda. La misurazione di G nel mini-laboratorio può essere effettuata rilasciando con attuatori elettrostatici, senza velocità relativa, due masse campione, preferibilmente due sfere d’oro da 1Kg, a distanza di 1 mm, e monitorando il loro libero moto, dominato dall’attrazione gravitazionale reciproca, con un sensore di spostamento laser interferometrico multicanale. Dopo il congiungimento le masse dovrebbero essere riposizionate e rilasciate nuovamente per una misurazione quasi continua della costante. Un meccanismo dorrebbe invece bloccare le masse durante le fasi dinamiche della sonda. Un sensore di spostamento interferometrico a fibre ottiche, FPS3010 della Attocube, appariva adatto ed un esperimento è stato realizzato per provarlo in un apparato simulante il mini-laboratorio. In una campana del vuoto isolata dalle vibrazioni, due cilindri in tungsteno da 1Kg sono stati sospesi orizzontante tramite micro-Dyneema a piastre in allumino movimentate da nanoposizionatori piezoelettrici dotati di encoder ottico nanometrico. Il sensore ha monitorato il moto radiale dei cilindri, le cui basi combacianti sono state posizionate a distanze di separazione variabili da 10 micron a 5000 micron. Malgrado il rumore meccanico ed una sorgente ignota di errore sistematico, un moto attrattivo è stato riscontrato differenzialmente o direttamente in molte misurazioni e nessuna ha mostrato un moto repulsivo. In alcune misurazioni è direttamente visibile la rotazione dell’asse di oscillazione dei cilindri sospesi. Il sensore si è comportato egregiamente.

Push-out bond strength of CAD/CAM-ceramic luted to dentin with self-adhesive resin cements

OBJECTIVES: This study evaluated the initial and the artificially aged push-out bond strength between ceramic and dentin produced by one of five resin cements. METHODS: Two-hundred direct ceramic restorations (IPS Empress CAD) were luted to standardized Class I cavities in extracted human molars using one of four self-adhesive cements (SpeedCEM, RelyX Unicem Aplicap, SmartCem2 and iCEM) or a reference etch-and-rinse resin cement (Syntac/Variolink II) (n=40/cement). Push-out bond strength (PBS) was measured (1) after 24h water storage (non-aged group; n=20/cement) or (2) after artificial ageing with 5000 thermal cycles followed by 6 months humid storage (aged group; n=20/cement). Nonparametrical ANOVA and pairwise Wilcoxon rank-sum tests with Bonferroni-Holm adjustment were applied for statistical analysis. The significance level was set at alpha=0.05. In addition, failure mode and fracture pattern were analyzed by stereomicroscope and scanning electron microscopy. RESULTS: Whereas no statistically significant effect of storage condition was found (p=0.441), there was a significant effect of resin cement (p<0.0001): RelyX Unicem showed significantly higher PBS than the other cements. Syntac/Variolink II showed significantly higher PBS than SmartCEM2 (p<0.001). No significant differences were found between SpeedCEM, SmartCem2, and iCEM. The predominant failure mode was adhesive failure of cements at the dentin interface except for RelyX Unicem which in most cases showed cohesive failure in ceramic. SIGNIFICANCE: The resin cements showed marked differences in push-out bond strength when used for luting ceramic restorations to dentin. Variolink II with the etch-and-rinse adhesive Syntac did not perform better than three of the four self-adhesive resin cements tested.

Changes of coagulation parameters during high altitude expedition

Data on changes of haemostatic parameters at altitudes above 5000 m are very limited. So far it is unknown, whether altered coagulation could contribute to the development of acute mountain sickness.