Det pedagogiska övervägandet : en uppmärksamhetsriktande studie i och genom humanvetenskaplig handlingsteori

Det övergripande syftet med avhandlingen är att bidra till en handlingsinriktad diskurs. Ambitionen är att rikta uppmärksamheten mot den pedagogiska övervägande handlingen genom att pröva konkreta exempel från en pedagogisk praktik mot en begreppsapparat inspirerad av den humanvetenskapliga handlingsteorin. Forskningsfrågorna lyder: Vad är en övervägande handling? Hur byggs den upp och vad förutsätter den? Bakgrunden till intresset att belysa den övervägande handlingen är en önskan att överbrygga klyftan mellan teori och praktik och att hitta ett sätt att samtala om ”tyst kunskap” och den konkreta pedagogiska verkligheten så att denna kan utvecklas på ett meningsfullt sätt. Förhållandet mellan intentionalitet och instrumentella handlingar är av särskilt intresse. Den aristoteliska begreppsapparaten som avser att belysa den mänskliga handlingen används i studien som både utgångspunkt och analysredskap. Retoriken ses som den vetenskap som kan beskriva och förklara hur vi skapar mening med hjälp av språket. Fyra fokussamtal med sammanlagt fem studerande på musikanimatörutbildningen genomfördes under vårterminen 2006. Referaten från samtalen bearbetades till en berättelse. I konstruktionen av berättelsen användes dels en fenomenologisk analys, dels narrativ bearbetning. De aristoteliska begreppen poíesis, praxis och theoria tillämpades och prövades på berättelsen varefter en retorisk analys genomfördes. Berättelsen visar två konkurrerande praxis. Utbildningen framstår i berättelsen dels som en horisontell ”alla kan”-utbildning, dels som en vertikal och lärarstyrd verksamhet. Berättelsen ger inte så många exempel på pedagogiska överväganden men tydliggör ändå den övervägande handlingen. Det pedagogiska övervägandet innebär ett väljande utifrån teoretiskt tänkbara och med praxis förenliga handlingsalternativ. Reflektion ingår i övervägandet men är inte detsamma som övervägande. Övervägandet är inte enbart en rationellt kalkylerande aktivitet. Holistiska och intuitiva procedurer är en viktig del i processen. Övervägande förutsätter dessutom ansvar.

Kropp, handling och ritual: hur förstå religion och personer med grava funktionshinder?

Arbetet som omsorgspräst sedan 1990 har väckt många frågor samband med mötet med personer som har grava funktionshinder. Det har skett framför allt i skriftskolor och konfirmationsundervisning från år 1984 framåt. Men speciellt samarbetet med fysioterapeut Karin Isaksson fick betydelse. Vi inbjöd personer med svåra spänningar och lite aktivitet att delta i en grupp med avslappning och kontemplativ sång. Gruppen (1997-2001)som höll på en timme gav uppmuntrande resultat. Men det var lättare för Isaksson att tänka på det i termer av avslappning och fysiskt välbefinnande då det för mig ingick sådant som helig närvaro och tystnad i mötet med deltagarna. Det resulterade så småningom i ett forskningsprojekt som jag kallar för Aaa-gruppen efter de kontemplativa intonationsövningar som ingår i ritualen. (AÅOM). Sex par (deltagare och handledare) anmälde sig till forskningsprojektet. Materialet samlades in åren 2002-2003. Aaa-gruppens ritual består av kontemplativ gregoriansk sång(intonationsövningar + antifoner som Kyrie eleison, Hosanna Filio David, Sanctus, Non i solo pane - Människan skall icke leva av bröd allenast och Fader Vår bönen.) Samarbetet i Aaa-gruppen mellan deltagare och handledare omfattade taktil stimulans (beröring enligt strykningar och ”Keep in Touch”) Materialet samlades in som observationsprotokoll, frågeformulär och intervjuer. Materialet har jag använt för att reflektera över hur vi kan förstå Aaa-gruppen och verklighet. I avhandlingen utgår jag från tankar om kontextens betydelse för en förståelse. Jag uppfattar att tre sammanhang är av betydelse för förståelsen. Dem har jag kallat för omsorgssammanhang, religiöst sammanhang och forskarsammanhang. I avhandlingen användes tre perspektiv som jag kallar för dialogfilosofi, neurofilosofi och livsformsfilosofi för att reflektera materialet. Den nära relationen mellan deltagare och handledare i Aaa-gruppen kan förstås ur olika sammanhang. Resultatet av den religionsfilosofiska reflektionen är att sammanhangen liksom de olika filosofiska perspektiven kompletterar och ger en mångsidig förståelse för religion och personer med grava funktionshinder. Reflektionen berör grundläggande frågeställningar kring kropp och medvetande och frågan om språk (nonverbalt och verbalt) och verklighet. En dualistisk uppfattning om jaget, som delbart i kropp och medvetande, avisas till förmån för ett så kallat ”kroppsjag”. Religion i Aaa-gruppen kan förstås som ett möte i en nära relation. Ett möte som är nonverbalt men inbegriper en mänskligt förhållningssätt som inom dialogfilosofin kan beskrivas med ordparet Jag-Du.

Hjärtats vanor, tankens välvilja och handens gärning : dygd som vårdetiskt grundbegrepp

The main aim of the study is to elucidate the meaning and dimensions of the concept of „virtue‟, and to find the place of virtue in a caritative caring ethics, i.e. a caring ethics based on human love and mercy. The intention is to create a theory model which utilizes the possibilities of virtue in developing the caritative caring ethics as a whole. The caritative caring ethics has a universal potential – it is primarily not a professional ethics, but it may form a frame of reference and basis for formulating ethical codes, and for ethical discussions within different caring contexts. The hermeneutic approach of the study is inspired by Gadamer‟s philosophical hermeneutics combined with the view of hermeneutics as a hypothetical-deductive process. The study is guided by Eriksson‟s model of definition of concepts. The concept of „virtue‟ is studied focusing on its ethical dimensions. These ethical dimensions of virtue are seen as anchored to an inner ethos, whereas ethos stands for the ontological goodness, a basic notion of the Good that permeates the entity of the human being, and forms the base of the culture where he lives and acts. The overarching research questions are: 1. What is virtue? 2. What is „virtue‟ as a basic concept in caring science? 3. What place does virtue have in caritative caring ethics? The answer of the first question is mainly searched for by an ontological determination comprising partly an etymologic and semantic analysis of „virtue‟, and partly a determination of the essence of virtue. The answer to the second and third questions are mainly searched for using a contextual determination, where the purposive context and pragmatic features of virtue are studied in relation to caring ethics. The ontological and contextual determinations are brought together through hermeneutical interpretation, forming a new whole, which constitutes the results of the study. The results of the study are depicted in a theory model, in which the movement of virtue from ethos to deed is moulded as caritative caring ethics. The material of the study consists of dictionaries, texts written by Aristotle and St. Thomas Aquinas, articles, dissertations, and books, as well as parts of a pilot survey answered by 33 nurses. The results of the study show that the essence of virtue is primarily functional, not ethical. The ethical emerges when virtue is contextualized in a human communion. Virtue makes something fulfil its function well; makes the human being good, and gives him morals and morality. The human being needs prudence, love, and humility to acquire and develop the moral virtues. Virtue is a power, related to a value, which considering a caritative caring ethics consists of the caritas motif. Human love is shown through deeds, making the human being do what he is expected to do. Virtue, as an active power of becoming, affirms and clarifies the human being‟s ability to develop in the direction of the Good. Virtue becomes essential and unifying when morality appears in the human mind as auctoritas, an inner, prompting power based on divinity or a transcendental ethos. Together ethos and virtue create opportunities for an inner ethics based on voluntariness and joy in being and doing the true, the good, and the beautiful.

Effects of Silica Based Biomaterials on Bone Marrow Derived Cells - Material Aspects of Bone Regeneration

Silica based biomaterials, such as melt-derived bioactive glasses and sol-gel glasses, have been used for a long time in bone healing applications because of their ability to form hydroxyapatite and to stimulate stem cell proliferation and differentiation. In this study, bone marrow derived cells were cultured with bioactive glass and sol-gel silica, and seeded into porous polymer composite scaffolds that were then implanted femorally and subcutaneously in rats to monitor their migration inside host tissue. Bone marrow derived cells were also injected intraperitoneally. Transplanted cells migrated to various tissues inside the host, including the lung, liver spleen, thymus and bone marrow. The method of transplantation affected the time frame of cell migration, with intraperitoneal injection being the fastest and femoral implantation the slowest, but not the target tissues of migration. Transplanted donor cells had a limited lifetime in the host and were later eliminated from all tested tissues. Bioactive glass, however, affected the implanted cells negatively. When it was present in the scaffold no donor cells were found in any of the tested host tissues. Bioactive glass S53P4 was found to support both osteoblastic and osteoclastic phenotype of bone marrow derived cells, but it was resistant to the resorbing effect of osteoclastic bone marrow derived cells, showing that bioactive glass is rather dissolved through physicochemical reactions than resorbed by cells. Fast-dissolving silica sol gel in microparticulate form was found to increase collagen formation by bone marrow derived cells, while slow dissolving silica microparticles enhanced their proliferation, suggesting that the dissolution rate of silica controls the response of bone marrow derived cells.

Experiences of Organising the Master of Science Programme in Packaging Technology

Organising the PT- programme for full-time working adult students is a challenging task as it is an international programme with both domestic and foreign students with different educational background. The purpose of this project work is to provide both student and lecturer feedback for improving Master Of Science Degree Programme in Packaging Technology to meet better the requirements of part-time studying. The objective of this work is in accordance with the Lappeenranta University of Technology’s strategy to improve continuously degree programmes and courses and to use student feedback in this development work of education. Matters, such as lecture schemes, distance material distribution, distance assignment handling, course assessments, and guidance of thesis work will be under scrutiny.

Uso de material didático sobre embriologia do sistema nervoso: avaliação dos estudantes

A Embriologia Humana é de extrema importância na formação de profissionais de saúde, porém seu estudo, muitas vezes, é considerado desestimulante, decorativo e sem significado prático para muitos estudantes, tornando-se pouco efetivo. Este trabalho objetivou produzir material didático interativo com modelos embrionários representativos do desenvolvimento embrionário do sistema nervoso. Para avaliar de forma qualitativa a real efetividade e capacidade de facilitar o processo de ensino-aprendizagem no contexto da Aprendizagem Baseada em Problemas, o material foi aplicado aos estudantes da primeira série de Medicina e Enfermagem da Faculdade de Medicina de Marília. Os estudantes consideraram que o material contribuiu para o entendimento do tema e facilitou a visualização dos eventos embrionários, além de despertar o interesse pelo estudo da disciplina. O material serviu como recurso para sedimentar o conhecimento e suscitou nos estudantes a integração dos conhecimentos com outras disciplinas. Em termos qualitativos, a análise dos questionários dos estudantes indicou que o material didático produzido foi efetivo na aprendizagem e funcionou como recurso na aprendizagem autodirigida, favorecendo a diversificação de fontes de busca e sendo complementar a livros-texto e outros materiais teóricos.

Inclusão de material herborizado em metacrilato para estudos de anatomia vegetal

As técnicas usuais empregadas no processamento de materiais herborizados são limitantes porque não permitem reproduzir um laminário permanente e porque o registro dos resultados é temporário. Em estudos de anatomia aplicada à taxonomia, muitas vezes, é necessário utilizar exsicatas. Este trabalho teve como objetivo testar a utilização de metacrilato (Historesin, Leica) na preparação e inclusão de material herborizado, visando a obtenção de laminário permanente. Foram utilizadas folhas de plantas herborizadas do gênero Senecio Tourn. ex L. (Asteraceae), previamente reidratadas em H2O e armazenadas em etanol 70%. As amostras foram desidratadas em série etanólica e submetidas à (1v:1v) mistura de AE 95% e resina pura. Durante a infiltração, com resina pura, o material foi submetido a vácuo durante 72 horas. Os blocos foram cortados em micrótomo de avanço automático, com navalhas de aço descartáveis, e os cortes foram corados com azul-de-toluidina (pH 4,0). As lâminas foram montadas em Permount. O laminário permanente obtido apresentou qualidade superior à dos produzidos pelas técnicas usuais, pois foi possível obter cortes seriados, com espessura determinada. Essa técnica possibilitou otimizar a obtenção de cortes, a partir de pequenos fragmentos de exsicatas.

Avaliação do processo produtivo de uma indústria de manufatura de painéis por meio do balanço de material e do rendimento da matéria-prima

O trabalho foi desenvolvido no setor de manufatura de painéis da Battistella Indústria e Comércio Ltda., localizada em Santa Catarina, e teve como objetivo a avaliação do processo produtivo de painéis, utilizando-se os princípios do balanço de material e do rendimento da matéria-prima. Além disso, pretendeu-se estabelecer uma metodologia para aplicação em outras indústrias madeireiras. Os dados foram obtidos através de visitas, aplicação de questionários e dados de escritório, e elaboraram-se equações e um fluxograma para representar o balanço de material. Concluiu-se que a indústria é integrada, representando vantagem competitiva. O balanço de material indicou que a atividade com maior potencial gerador de resíduos foi a preparação de sarrafos de madeira (55,71% do total de resíduos gerados). As atividades com maiores rendimentos foram a prensagem (97,44%), o seccionamento (93,92%), o esquadrejamento (93,51), o lixamento (90,97%) e a preparação de sarrafos (54,51%). O rendimento geral da manufatura foi de 63,16%, sendo os valores encontrados no trabalho similares aos da literatura. A metodologia desenvolvida para o trabalho é simples e pode ser aplicada em outras indústrias do setor madeireiro.

Determinação do fator de conversão em colônias de Atta sexdens rubropilosa (Hymenoptera: Formicidae) e sua relação com a qualidade do material vegetal cortado

As formigas cortadeiras (Atta e Acromyrmex) são consideradas importantes pragas na agricultura e silvicultura, mas pouco se sabe sobre os reais danos dessas espécies. Uma forma bastante difundida de avaliação do dano é por meio do cálculo da taxa de conversão, dividindo-se o peso do material cortado pelo peso de lixo produzido pelas colônias. Foi levantada a hipótese de que a qualidade do substrato cortado pode influenciar no forrageamento das operárias, alterando a taxa de conversão e dificultando as estimativas de dano. A taxa de conversão de oito colônias de Atta sexdens rubropilosa Forel (Hymenoptera: Formicidae) foi calculada com duas espécies vegetais com diferentes concentrações de lignina e celulose, para testar essa hipótese. Colônias mantidas com folhas de baixa qualidade (razão lignina/celulose elevada) tiveram maior forrageamento e produziram mais lixo. Entretanto, a taxa de conversão das colônias foi semelhante com essas duas plantas (média = 1,54). Esse valor está dentro da variação encontrada para outras espécies no campo (1,5-1,8), indicando um fator semelhante de conversão entre os gêneros Atta e Acromyrmex. O consumo médio de material vegetal, em termos de pesos seco e fresco, de uma colônia de A. sexdens rubropilosa com 4.500 operárias, foi estimado em 520 e 1.100 g/ano, respectivamente.

Hakun kulutusosien materiaalivaihtoehdot sellutehtaan puunkäsittelylaitoksen erilaisiin prosessiolosuhteisiin

Selluteollisuuden puunkäsittelylaitoksilla laitteiden kuluminen on prosessin luonteesta johtuen suurta ja kulumisen aiheuttamat kunnossapitokustannukset laitteiden elinkaaren aikana ovat huomattavia. Näissä olosuhteissa toimivan hakun osien kulumista on tutkittu ja tutkimusten pohjalta on kehitetty kulutusta kestäviä materiaalivaihtoehtoja. Vaihtoehtojen vertailut prosesseittain kuitenkin puuttuvat. Terävasteen osalta tutkimus- ja kehitystyötä on tehty vähän. Tässä diplomityössä selvitetään ja vertaillaan hakun kulutusosien kulumismekanismeja, osien materiaalivaihtoehtoja, valmistus- ja kunnostusmenetelmiä ja -kustannuksia laitteen elinkaaren aikana kolmessa erilaisessa puunkäsittelyprosessissa. Työssä annetaan suosituksia kuhunkin prosessiin ja kunnossapitostrategiaan parhaiten soveltuvista ratkaisuista. Työn Case-osuudessa tutkitaan uusia kulutusta kestäviä materiaalivaihtoehtoja terävasteelle. Case-tutkimuksen tuloksena löydettiin terävasteelle kolme uutta materiaalivaihtoehtoa sekä muita vaihtoehtoja, joiden käyttökelpoisuutta kannattaa tutkia lisää. Samalla saatiin terävasteelle parempaan laatuun pystyvä ja kilpailukykyisempi toimittaja. Tutkimuksen perusteella saatiin uusia suosituksia myös muiden kulutusosien materiaali- ja/tai pinnoitusvaihtoehdoiksi. Tuloksista voidaan mainita lisäksi, että kulutusosille löydettiin suositeltavimmat elinkaarikustannuksiltaan edullisimmat vaihtoehdot. Kulutusosien kunnostamiseen liittyen havaittiin, että kunnostaminen on kannattavaa yhtä poikkeusta lukuun ottamatta. Kunnostusprosessista löydettiin kehitettävää. Työn tuloksena saatiin myös useita uusia kehittämisideoita ja runsaasti suosituksia jatkotoimenpiteistä. Hakun kulutusosien nykytilasta saatiin hyvä käsitys ja kattava tietopaketti.

Wood as a model material for medical biomaterials. In vivo and in vitro studies with bone and Betula pubescens Ehrh

Novel biomaterials are needed to fill the demand of tailored bone substitutes required by an ever‐expanding array of surgical procedures and techniques. Wood, a natural fiber composite, modified with heat treatment to alter its composition, may provide a novel approach to the further development of hierarchically structured biomaterials. The suitability of wood as a model biomaterial as well as the effects of heat treatment on the osteoconductivity of wood was studied by placing untreated and heat‐treated (at 220 C , 200 degrees and 140 degrees for 2 h) birch implants (size 4 x 7mm) into drill cavities in the distal femur of rabbits. The follow‐up period was 4, 8 and 20 weeks in all in vivo experiments. The flexural properties of wood as well as dimensional changes and hydroxyl apatite formation on the surface of wood (untreated, 140 degrees C and 200 degrees C heat‐treated wood) were tested using 3‐point bending and compression tests and immersion in simulated body fluid. The effect of premeasurement grinding and the effect of heat treatment on the surface roughness and contour of wood were tested with contact stylus and non‐contact profilometry. The effects of heat treatment of wood on its interactions with biological fluids was assessed using two different test media and real human blood in liquid penetration tests. The results of the in vivo experiments showed implanted wood to be well tolerated, with no implants rejected due to foreign body reactions. Heat treatment had significant effects on the biocompatibility of wood, allowing host bone to grow into tight contact with the implant, with occasional bone ingrowth into the channels of the wood implant. The results of the liquid immersion experiments showed hydroxyl apatite formation only in the most extensively heat‐treated wood specimens, which supported the results of the in vivo experiments. Parallel conclusions could be drawn based on the results of the liquid penetration test where human blood had the most favorable interaction with the most extensively heat‐treated wood of the compared materials (untreated, 140 degrees C and 200 degrees C heat‐treated wood). The increasing biocompatibility was inferred to result mainly from changes in the chemical composition of wood induced by the heat treatment, namely the altered arrangement and concentrations of functional chemical groups. However, the influence of microscopic changes in the cell walls, surface roughness and contour cannot be totally excluded. The heat treatment was hypothesized to produce a functional change in the liquid distribution within wood, which could have biological relevance. It was concluded that the highly evolved hierarchical anatomy of wood could yield information for the future development of bulk bone substitutes according to the ideology of bioinspiration. Furthermore, the results of the biomechanical tests established that heat treatment alters various biologically relevant mechanical properties of wood, thus expanding the possibilities of wood as a model material, which could include e.g. scaffold applications, bulk bone applications and serving as a tool for both mechanical testing and for further development of synthetic fiber reinforced composites.

Spectrometrical Monitoring of Laser Sintering Process of Ceramic Material

This thesis is done as a part of project called FuncMama that is a project between Technical Research Centre of Finland (VTT), Oulu University (OY), Lappeenranta University of Technology (LUT) and Finnish industrial partners. Main goal of the project is to manufacture electric and mechanical components from mixed materials using laser sintering. Aim of this study was to create laser sintered pieces from ceramic material and monitor the sintering event by using spectrometer. Spectrometer is a device which is capable to record intensity of different wavelengths in relation with time. In this study the monitoring of laser sintering was captured with the equipment which consists of Ocean Optics spectrometer, optical fiber and optical lens (detector head). Light from the sintering process hit first to the lens system which guides the light in to the optical fibre. Optical fibre transmits the light from the sintering process to the spectrometer where wavelengths intensity level information is detected. The optical lens of the spectrometer was rigidly set and did not move along with the laser beam. Data which was collected with spectrometer from the laser sintering process was converted with Excel spreadsheet program for result’s evaluation. Laser equipment used was IPG Photonics pulse fibre laser. Laser parameters were kept mainly constant during experimental part and only sintering speed was changed. That way it was possible to find differences in the monitoring results without fear of too many parameters mixing together and affecting to the conclusions. Parts which were sintered had one layer and size of 5 x 5 mm. Material was CT2000 – tape manufactured by Heraeus which was later on post processed to powder. Monitoring of different sintering speeds was tested by using CT2000 reference powder. Moreover tests how different materials effect to the process monitoring were done by adding foreign powder Du Pont 951 which had suffered in re-grinding and which was more reactive than CT2000. By adding foreign material it simulates situation where two materials are accidently mixed together and it was studied if that can be seen with the spectrometer. It was concluded in this study that with the spectrometer it is possible to detect changes between different laser sintering speeds. When the sintering speed is lowered the intensity level of light is higher from the process. This is a result of higher temperature at the sintering spot and that can be noticed with the spectrometer. That indicates it could be possible to use spectrometer as a tool for process observation and support the idea of having system that can help setting up the process parameter window. Also important conclusion was how well the adding of foreign material could be seen with the spectrometer. When second material was added a significant intensity level raise could be noticed in that part where foreign material was mixed. That indicates it is possible to see if there are any variations in the material or if there are more materials mixed together. Spectrometric monitoring of laser sintering could be useful tool for process window observation and temperature controlling of the sintering process. For example if the process window for specific material is experimentally determined to get wanted properties and satisfying sintering speed. It is possible if the data is constantly recorded that the results can show faults in the part texture between layers. Changes between the monitoring data and the experimentally determined values can then indicate changes in the material being generated by material faults or by wrong process parameters. The results of this study show that spectrometer could be one possible tool for monitoring. But to get in that point where this all can be made possible much more researching is needed.

Avaliação do potencial do grits como material de construção na produção de tijolos de solo-cimento

O "grits" é um resíduo sólido de características arenosas e coloração acinzentada, gerado pela indústria de polpa kraft durante a etapa de recuperação do licor branco empregado no cozimento dos cavacos de madeira. O objetivo deste trabalho foi estudar o potencial do grits como material de construção, considerando-se a sua empregabilidade na fabricação de tijolos de solo-cimento. Para a determinação da quantidade ideal de resíduo a ser utilizada, foram estudados os traços em volume 1:14:0; 1:10,5:3,5; 1:7:7; 1:3,5:10,5; e 1:0:14 de cimento, solo e grits, respectivamente. Os materiais foram caracterizados por meio de ensaios de análise granulométrica, limite de liquidez e limite de plasticidade, e os resultados foram de acordo com as prescrições normativas. O ensaio prático da caixa também foi usado para verificar os materiais, e os resultados atenderam às recomendações. Uma vez realizado o ensaio de compactação para obter o teor de umidade ótima, os tijolos foram produzidos com 90% desse valor, pois a resistência à compressão é favorecida com o material do ramo seco. No entanto, durante a moldagem não foi possível produzir tijolos com os traços 1:3,5:10,5 e 1:0:14, pois, nesses casos, as misturas de solo-cimento-grits não apresentaram plasticidade suficiente. Os tijolos produzidos com os demais traços foram, então, submetidos a ensaios de resistência à compressão e de absorção. Em relação à resistência à compressão, aos 28 dias todos os traços apresentaram valores médios superiores ao estabelecido pela normalização, que é de 2,0 MPa. Os tijolos fabricados com maior quantidade de grits apresentaram melhor desempenho no que se refere à resistência mecânica. Assim, este estudo não apenas apresenta o benefício ambiental de destinar corretamente o resíduo, como também contribui com novos materiais para a construção civil.

Waste Stream Investigation from Perspective of Changing Waste Legislation at Green Sand Foundries

The update of the Finnish legislation concerning waste was unavoidable, to comply with the European Union (EU) requirements defined in the EU-Directive on Waste. The new waste law updates were enacted into the Finnish legislation on the 11.03.2011 and targeted for applicability by the 11.03.2012. This thesis investigates the implications of the new amendments to the waste legislation from the perspective of green sand foundries. The investigations are conducted by comparing two of Componenta’s green sand foundries and evaluating their waste streams. Additionally, the impacts of legislation amendments are critiqued on their environmental and economic aspects. The study’s comparison of waste fractions at the two foundries reveals that sand is dominant in absolute tonnage and costs. The increments of waste taxes forces foundries to focus on waste management, recycling and disposing. The new legislation’s promotion of material efficiency, also guides foundries towards the prevention of waste. A potential preventive measure is to regenerate waste sand resulting to cost savings on both raw-materials and waste management. However, the lack of absolute targets for waste prevention or recycling rates discourages the interests towards creating or adopting new technologies and methods for the waste handling.