944 resultados para logical structure method
Resumo:
In this work, a new design concept of SMS moving optics is developed, in which the movement is no longer lateral but follows a curved trajectory calculated in the design process. Curved tracking trajectory helps to broaden the incident angle?s range significantly. We have chosen an afocal-type structure which aim to direct the parallel rays of large incident angles to parallel output rays. The RMS of the divergence angle of the output rays remains below 1 degree for an incident angular range of ±450. Potential applications of this beam-steering device are: skylights to provide steerable natural illumination, building integrated CPV systems, and steerable LED illumination.
Resumo:
A new method to analyze the influence of possible hysteresis cycles in devices employed for optical computing architectures is reported. A simple full adder structure is taken as the basis for this method. Single units, called optical programmable logic cells, previously reported by the authors, compose this structure. These cells employ, as basic devices, on-off and SEED-like components. Their hysteresis cycles have been modeled by numerical analysis. The influence of the different characteristic cycles is studied with respect to the obtained possible errors at the output. Two different approaches have been adopted. The first one shows the change in the arithmetic result output with respect to the different values and positions of the hysteresis cycle. The second one offers a similar result, but in a polar diagram where the total behavior of the system is better analyzed.
Resumo:
Este trabajo propone una serie de algoritmos con el objetivo de extraer información de conjuntos de datos con redes de neuronas. Se estudian dichos algoritmos con redes de neuronas Enhenced Neural Networks (ENN), debido a que esta arquitectura tiene algunas ventajas cuando se aproximan funciones mediante redes neuronales. En la red ENN los pesos de la matriz principal varián con cada patrón, por lo que se comete un error menor en la aproximación. Las redes de neuronas ENN reúnen la información en los pesos de su red auxiliar, se propone un método para obtener información de la red a través de dichos pesos en formas de reglas y asignando un factor de certeza de dichas reglas. La red ENN obtiene un error cuadrático medio menor que el error teórico de una aproximación matemática por ejemplo mediante polinomios de Taylor. Se muestra como una red ENN, entrenada a partir un conjunto de patrones obtenido de una función de variables reales, sus pesos asociados tienen unas relaciones similares a las que se veri_can con las variables independientes con dicha función de variables reales. Las redes de neuronas ENN aproximan polinomios, se extrae conocimiento de un conjunto de datos de forma similar a la regresión estadística, resolviendo de forma más adecuada el problema de multicolionalidad en caso de existir. Las relaciones a partir de los pesos asociados de la matriz de la red auxiliar se obtienen similares a los coeficientes de una regresión para el mismo conjunto numérico. Una red ENN entrenada a partir de un conjunto de datos de una función boolena extrae el conocimiento a partir de los pesos asociados, y la influencia de las variables de la regla lógica de la función booleana, queda reejada en esos pesos asociados a la red auxiliar de la red ENN. Se plantea una red de base radial (RBF) para la clasificación y predicción en problemas forestales y agrícolas, obteniendo mejores resultados que con el modelo de regresión y otros métodos. Los resultados con una red RBF mejoran al método de regresión si existe colinealidad entre los datos que se dispone y no son muy numerosos. También se detecta que variables tienen más importancia en virtud de la variable pronóstico. Obteniendo el error cuadrático medio con redes RBF menor que con otros métodos, en particular que con el modelo de regresión. Abstract A series of algorithms is proposed in this study aiming at the goal of producing information about data groups with a neural network. These algorithms are studied with Enheced Neural Networks (ENN), owing to the fact that this structure shows sever advantages when the functions are approximated by neural networks. Main matrix weights in th ENN vary on each pattern; so, a smaller error is produced when approximating. The neural network ENN joins the weight information contained in their auxiliary network. Thus, a method to obtain information on the network through those weights is proposed by means of rules adding a certainty factor. The net ENN obtains a mean squared error smaller than the theorical one emerging from a mathematical aproximation such as, for example, by means of Taylor's polynomials. This study also shows how in a neural network ENN trained from a set of patterns obtained through a function of real variables, its associated weights have relationships similar to those ones tested by means of the independent variables connected with such functions of real variables. The neural network ENN approximates polynomials through it information about a set of data may be obtained in a similar way than through statistical regression, solving in this way possible problems of multicollinearity in a more suitable way. Relationships emerging from the associated weights in the auxiliary network matrix obtained are similar to the coeficients corresponding to a regression for the same numerical set. A net ENN trained from a boolean function data set obtains its information from its associated weights. The inuence of the variables of the boolean function logical rule are reected on those weights associated to the net auxiliar of the ENN. A radial basis neural networks (RBF) for the classification and prediction of forest and agricultural problems is proposed. This scheme obtains better results than the ones obtained by means of regression and other methods. The outputs with a net RBF better the regression method if the collineality with the available data and their amount is not very large. Detection of which variables are more important basing on the forecast variable can also be achieved, obtaining a mean squared error smaller that the ones obtained through other methods, in special the one produced by the regression pattern.
Resumo:
El deporte de la esgrima no siempre ha sido considerado como actualmente se conoce, ni tampoco el empleo de las armas ha sido el mismo en las diferentes épocas de la historia. Si nos centramos en la española, podemos decir que se hablaba de una forma particular de hacer esgrima, la cual era muy apreciada por el resto de los países europeos. También lo era la que se hacía en Italia. Como cualquier actividad que se desarrolla a lo largo del tiempo debe generarse desde unos comienzos. Estos comienzos siempre están en relación a alguna causa. Para centrarnos en nuestro estudio, los comienzos del manejo de la espada, de una manera lógica y razonada, se une en la persona y en la vida de Jerónimo Sánchez Carranza porque hasta que él no se decide a estudiar en profundidad la ciencia de las armas, no se ve con claridad si todo lo que se hacía con ellas era correcto o no y si todo lo que la inmensa mayoría hacía cuando tenía que utilizarlas estaba revestido de cierta coherencia y fundamento, es decir, tenía su verdad que se pudiera demostrar. Carranza estudia la esgrima que se empleaba en su época y en las anteriores y se da cuenta que tiene que dar una nueva visión de la forma de usar las armas, diferente a lo que la gran mayoría entendía hasta entonces. A Carranza se le ha considerado por muchos autores como el inventor de la esgrima española, hecho que se puede leer con bastante facilidad si se hojea algún tratado que hable de la esgrima española, sin embargo también se habla de Luis Pacheco de Narváez asignándole el mismo calificativo, aunn- ;o es posteriora Carranza. or tanto nuestro estudio se ha centrado en la vida de Jerónimo Sánchez Carranza y en ueva forma de emplear las armas por lo que hace que la tesis sea una tesis biográfica de dicho personaje, donde se ha resaltado mucho más el aspecto del manejo de las armas, de la Destreza. Partimos de las siguientes hipótesis: Carranza es el que sienta los principios técnicos dando forma y coherencia a la escuela de esgrima española gracias a sus aportaciones en los distintos aspectos metodológicos, técnicos y tácticos. La escuela de esgrima española tiene una estructura interna, responde a unas características determinadas y sirve de base a la esgrima que posteriormente se practica. Para que el estudio se pudiera llevar a cabo tuvimos que diseñar un esquema donde se pudieran recoger todos los aspectos que estuvieran relacionados con nuestro autor, de ahí surge el porqué de cada uno de los capítulos que hemos confeccionado. Dicho esquema responde a la visión actual de diferentes facetas de lo que hoy se estudia en diversas ciencias y que cuando Carranza vivía aún no se conocían. Para recoger información sobre su persona y su obra tuvimos en cuenta los distintos lugares donde se podía localizar la documentación necesaria, sobre todo Bibliotecas y Archivos, para ir confeccionando el método de trabajo que consistió en la recopilación de fuentes de todo tipo referidas al tema, pasando luego a la interpretación de las mismas. Esto nos dio una visión de conjunto que hizo que nos adentráramos en aquellos aspectos que más tarde tendríamos que analizar con mucho más detenimiento. En la tesis se puede observar dos partes bien diferenciadas que son las relacionadas; por un lado, a su vida y su tratado y, por otro, al contenido de sus teorías que son realmente las que se deben analizar necesariamente bajo unos conocimientos específicos de la actividad de la esgrima. En cuanto a su vida, se han destacado y estudiado los hechos más importantes de los que hay que resaltar, sobre todo, el que fuera considerado como el inventor de la destreza y de la manera tan particular de concebir dicho arte, diferente a lo que hasta ahora se venía haciendo y que dio paso a lo que se entendió por esgrima científica, quedando plasmada de tal manera que dio pie a la creación de una doctrina y una nueva forma de entender la esgrima la cual generó una línea de actuación que fue continuada por numerosos seguidores. Para todo ello tuvo mucho que ver el que Carranza fuera militar, la cultura y los estudios que poseía, así como la situación en la que se encontraba España además de la gente con quien se relacionaba, que por lo general, era gente culta y de clase social alta. Se ha estudiado también dentro del mismo apartado de su vida unos hechos que se le imputan y que en nuestra opinión son erróneos. Hemos considerado como más relevantes el que Carranza no fue quien riñó con Quevedo como se afirma en algunas de las obras que hemos tratado, sino que fue Pacheco quien tuvo dicha riña, ya que más bien Quevedo se mostraba partidario de las enseñanzas de Carranza, estando en contra de Pacheco. Tampoco fue quien inventó el florete como se dice en algunas ocasiones, ya que el florete aparece posteriormente como un arma de estudio de la técnica de la esgrima. Con respecto al apartado de su obra, se debe decir que tan solo escribió un único tratado que se publicó en 1582, aunque estaba acabado desde el año 1569. En el apartado de su escuela se debe destacar los fundamentos en los que basó sus postulados para que la destreza alcanzara el mismo nivel de las demás artes liberales y que lo hizo a través del estudio de la propia destreza. A lo largo del estudio que hemos realizado se puede apreciar cómo se está generando un arte que hasta ahora no había sido estudiado, viéndose los problemas que ello suponía, desde la organización de la materia a tratar, hasta cómo se debía enseñar, pasando a veces a tener que denominar conceptos de nueva aparición o renombrar y modificar antiguos que estaban anclados en puntos de partida equivocados, siendo éstos los que mayor trabajo le supuso. Diferencia bien dos aspectos básicos que debían existir en cualquier arte y más concretamente en la destreza que son: la teoría y la práctica, ambas deben estar en base a la razón ya que sería una de las formas por la que la destreza perduraría en el tiempo, junto con que esta razón estuviera apoyada en otras ciencias y con los principios de ellas. Carranza fue de la opinión de que el diestro debía conocer mediante el estudio, los elementos fundamentales con los que había que trabajar la destreza, estos elementos son el cuerpo del diestro y las armas, porque ambos van a intervenir en cualquier gesto o acción que se vaya a realizar. Del cuerpo estudió cada una de las partes que más importancia tiene cada vez que el diestro interviene y lo hace sobre todo en base a la medicina, relacionándolo con las matemáticas para poder sacar el máximo provecho, aconsejando que por el conocimiento del propio cuerpo, como el del contrario, se podrá emplear en determinadas situaciones, que si no se supiera de ello, no se sacaría el mismo resultado. De las armas lo que más resaltó fue, por un lado, que la espada debía ser el único arma que el diestro debía utilizar y, por otro, el hecho de que la espada la graduara para poder demostrar que no se hacia todo igual con las distintas partes de la misma porque no todo el arma tenía las mismas propiedades cuando se actuaba con ella. Una de las recomendaciones que dio fue que con la parte más próxima a la empuñadura se debía practicar la defensa por tener más fuerza con esta parte que con la punta y lo demostró con principios matemáticos. Se puede ver con la lectura de la tesis cómo Carranza aporta una nueva forma de trabajo en la que le da mucha importancia a la aplicación de los conocimientos, que previamente se han adquirido y para ello, es importante conocer bien los puntos fuertes y débiles del adversario. La adquisición de la práctica se debe realizar a través de la repetición para crear el hábito necesario que haga que el gesto salga fluido en cada uno de los movimientos que el diestro ejecute. Todo esto no sería posible si quien lo enseña no conoce cada uno de los elementos que intervienen en la destreza, por tanto, a la figura del maestro le da un lugar de una gran relevancia, ya que va a ser él quien tenga que guiar a los alumnos que enseñe. Lo primero que debe hacer los maestros es procurar saber lo máximo de la materia que va a enseñar, por lo que el maestro debe saber casi todo sobre la teoría y la práctica de la destreza, pero además esta teoría y práctica debe ser la correcta. Carranza persigue con su estudio, establecer los principios de la destreza, por lo menos, los más importantes, aunque fueran elementales, para que posteriormente se siguiera trabajando sobre ellos y poder conseguir que la destreza tenga cuerpo y forma de arte liberal, pudiéndose estudiar como cualquier otra, así de esta manera se haría un bien público, ya que los jóvenes se instruirían eficazmente en el uso de las armas, aunque el verdadero fin se encuentra en la conservación de la vida como manda la Fe Católica, siendo la destreza uno de los medios más eficaces para conseguirlo. Hemos dedicado un apartado de técnica y de táctica donde se refleja todo lo relacionado con las posiciones y movimientos que debe realizar el diestro para llegar a conseguir su objetivo, que es herir sin ser herido. Se han analizado las distintas tretas y el porqué de cada una desde el punto de vista del gesto y del movimiento. Si lo que se hace en destreza se relaciona con el adversario, nos adentramos en el terreno de la táctica donde se han estudiado como más importantes los conceptos del tiempo y la distancia, así como las energías que debe conservar el diestro para poder llevar a cabo un combate y del mismo salir victorioso sin llegar al agotamiento. Concluimos diciendo que de todo el estudio que se ha realizado, se ha podido comprobar que Carranza fue quien dotó a la destreza de unos principios técnicos, tácticos y metodológicos, por su forma de concebir este nuevo arte, así como que por la manera en que estableció sus teorías hizo que la destreza que se practicaba en España disfrutara de una estructura interna coherente que perduró a través de los años. SUMMARY The sport of fencing has not always been the respected sport that we know it to be today ñor has the use of weapons been the same throughout history. If we concéntrate on Spainish weapons, we can say that one particular type of sword ¡s spoken about. this sword being very respected by outher European countries, it was also the one that was respected and used in Italy. As with any activity that develops in time, it must evlove from some simple beginnings. Such basics beginnings are always in relation to a cause. To concéntrate on our study, the beginnings are, the use of the sword in a reasoned and logical manner, brought together in the life and times of Jerónimo Sánchez Carranza because until he decided to study in depth the science of weapons, we cannot see with calrity if their use was correct or not and if the vast majority , when they had to use them, used any foundation or coherence, that ¡s to say if any exactness of logical use could be demonstrated. Carranza studied the sword used in his time and those that had gone before, bearing in mind that he had a new visión of the form of use of weapons, different to what the vast majority had until then understood. Carranza has been considered by many historians as the inventor of the Spanish sword, a fact which can be seen with relative ease if one flicks through any work which deals with the Spanish sword, however, they also speak of Luis Pacheco de Narváez affording him the same title, even though he followed Carranza. In ar H our study has been centred on the life of Jerónimo Sánchez Carranza and his ne-" use of weapons. In effect this thesis is a biographical thesis of the said wherein the aspect of the use of weapons stands out more than their mastery. Given the following hypothesis: It was Carranza who evolved the first techniques giving form and coherence to the .Spanish School of Fencing, thanks to his contributions to the different aspects of method, íechnique and tactic. The Spanish School of Fencing had an ¡nternal structure anaswerable to pre-detremined characteristics and served as a base for the fencing that was to, in later days, be practised. For this study to come to a head, we had to design a plan wherein we could collate all of the aspects we could, related to our inventor. From there springs the reason for each of the chapters that we have put together. The said plan responding to the actual visión of different facets that are studied today in different sciences, that were not known in Carranza's lifetime. To collect information on his person and his works we bore in mind the different places in which we could lócate the necessary documentation, above all in libraries and archives. Developing the work-method that consisted in extracing from every source, every thing relative to the theme, re-writing later our interpretation of the same. This brought us closer and made us focus of those aspects that much later we would have to analize in greater detail. In the thesis one can observe two defferent parts that are related; on the one hand his life and works and on the other his theories, which are those that should be really analised and as such, necessarily analised within the confines of a specific knowledge of fencing. In that his life has been isolated and studied the most important facts that stand out above all, is that he was considered to be the inventor of swordmanship and the particular manner of interpreting the said art, different to its interpretaion uptil then. It gave a footing to what they understood as scientific fencing, giving shape and form to the creation of a doctrine and a new form of fencing which developed a line of action that was continued by numerious followers. For all that, much had to do with the facts that Carranza was a military man, the culture, the level of studies he had and the situation in which he found himself. What's more the people with whom he mixed were, in general, cultured and of high social standing. We have also seen in the same article on his life some dubious facts which in our opinión are erróneos. We have considered the most relevent to be that it wasnt Carranza who was in dispute with Quevedo as is stated in some of the works with which we have dealt but rather it was with Pacheco he had such disputes. What's more Quevedo demonstrated his partiality to the teachings of Carranza, going against Pacheco ñor was it him who invented The Florete, a famous Spanish sword, as was said on some ocassions, eventhough the florete appeared later as a weapon in the study of fencing technique. With respect to the article on his works, we must say that there was only one article which was published in 1582, even though it was finished in 1569. In the article on his life one must distinguish between the foundations on which he based his teachings in which swordmanship reached the same levéis as other libral art forms and what he did through the study of the self same mastery. Throughout the study which we have done, one can appreciate how he was developing an art which uptill then had not been studied, seeing for himself the problems he had fortold, from the organisation of materials at hand to how it should be taught, at times having to domínate comparative concepts again or clarify and modify ones which were anchored in erróneos points of a fencing match, feeling these to be the main forseeable jobs-at-hand. Differenciating between two basic concepts which must exist in whatever arte form and more concretly in the skill that is; the theory and practice , both being fundamental to the reason why the skill endured through time, together with this reason he was supported by other sciences and the beginnings of such. Carranza was of the opinión that the swordsman must acquired by way of study, the fundemental elements with which he had to work, these elements being the body of the swordsman and the weapons, because both were going to intervene in whatever movement or action that was going to be taken. The body studied, each of the parts having more importance each time the skill intervened and above all what it did based on medicne relating it to matemathics to exact the máximum advantage, one could employ in certain circumstances, that if they were not employed, the same advantages would not result. On weapons, what resulted best was, on the one hand, the sword should be the only weapon that the swordsman should use and on the other hand, the sword should be graded to show that one cannot do the same with the different parts of the same because not all of the weapon had the same properties when used. One of the recomendations he made was that the part nearest to the hand-guard should be used for defence because one could use more forcé with it than the point and he demonstrated this with mathematical principies. One can see on reading this thesis how Carranza brought forth a new work form, in which he put much importance on the application of experience that had previously been acquired and because of it, it was important to know well the strenghts and weaknesses of an adversery. The acquisition of technique should be realised through repetition to form the habit necessary for movement to flow freely each time the swordsman executed a movement. None of this would be possible if whoever was teaching did not know each one of the elements that intervened, affording the fencing master a great reverence, in that it was he who had to guide the students he was to teach. The first thing that the master had to do was to make sure he had the maximun knowledge over which he was going to teach, to that end, the master had to know almost everything about the theory and practice of the skill of fencing but what's more that such theory and practice had to be the correct one. Carranza persued his studies, establishing the principies of technique, at least, the most important ones even though they were elementary, so that later they could continué working on them and it could be seen that the technique had a shape and form of any other art form, allowing it to be studied like any other form, as such it had a good following, even young people could be instructed in the correct use of weapons, however the real end could be found in the conservaron of life as ordered by the Catholic Church, feeling that skill with the sword was one of the most effective methods for assuring it. We have dedicated an article to technique and tactics wherein is reflected everything related to positions and movement that the swordsman must do to achieve his objective, that is, wound without being wounded. We have analised the different tricks and the reasons from every point of view of movement and action. If what is done by technique is related with the adversery we enter in the territory of tactics wherein we have studied, most importantly, the concepts of time and distance just as, the energy the swordsman muse conserve to bring to a head a bout and arrive victorious without being exhausted. We conclude by saying that everything that has been realised by this study, has shown that it was Carranza who gave to the skill, the first basic techniques, tactics and methodology, by his conception of this new art form, just as the manner in which he established his theories, made possible the tecnhiques practiced in Spain would enjoy an intemal coherent structure, which would endure throughout the years.
Resumo:
Dynamic soil-structure interaction has been for a long time one of the most fascinating areas for the engineering profession. The building of large alternating machines and their effects on surrounding structures as well as on their own functional behavior, provided the initial impetus; a large amount of experimental research was done,and the results of the Russian and German groups were especially worthwhile. Analytical results by Reissner and Sehkter were reexamined by Quinlan, Sung, et. al., and finally Veletsos presented the first set of reliable results. Since then, the modeling of the homogeneous, elastic halfspace as a equivalent set of springs and dashpots has become an everyday tool in soil engineering practice, especially after the appearance of the fast Fourier transportation algorithm, which makes possible the treatment of the frequency-dependent characteristics of the equivalent elements in a unified fashion with the general method of analysis of the structure. Extensions to the viscoelastic case, as well as to embedded foundations and complicated geometries, have been presented by various authors. In general, they used the finite element method with the well known problems of geometric truncations and the subsequent use of absorbing boundaries. The properties of boundary integral equation methods are, in our opinion, specially well suited to this problem, and several of the previous results have confirmed our opinion. In what follows we present the general features related to steady-state elastodynamics and a series of results showing the splendid results that the BIEM provided. Especially interesting are the outputs obtained through the use of the so-called singular elements, whose description is incorporated at the end of the paper. The reduction in time spent by the computer and the small number of elements needed to simulate realistically the global properties of the halfspace make this procedure one of the most interesting applications of the BIEM.
Resumo:
In living bodies, the correct perceptual representation of size constancy requires that an object's size appear the same when it changes its location with respect to the observer. At the same time, it is necessary that objects at different locations appear to be the same size if they are. In order to do that, the perceptual system must recover from the stimuli impinging on the individual, from the light falling on the retina, a representation of the relative sizes of objects in the environment. Moreover, at the same time, image perception is related to another type of phenomena. It corresponds to the well known perceptual illusions. To analyze this facts, we propose a system based on a particular arrays of receptive points composed by optical fibers and dummy fibers. The structure is based on the first layers of the mammalians primary visual cortex. At that part of the brain, the neurons located at certain columns, respond to particular directions. This orientation changes in a systematic way as one moves across the cortical surface. In our case, the signals from the above-mentioned array are analyzed and information concerning orientation and size of a particular line is obtained. With this system, the Muelle-Lyer illusion has been studied and some rules to interpret why equal length objects give rise to different interpretations are presented.
Resumo:
The theoretical improvements performed since the last spacecraft and mechanical testing conference on the study of the pyrotechnic shock phenomena produced during the separation of the lower stage of the Ariane 5 Vehicle Equipment Bay (VEB) structure are described. The first theoretical approach used was based on the wave propagation method, including axial and shear waves. The method was changed, in order to capture the bending effects, as well as the influence of the frequency dependent damping values. In addition to the development of the theoretical method, efforts were made to improve the criteria used to model the structure. Comparison of the theoretical predictions with the test results of a flat test sample 1 m width, as well as a preliminary test performed on a small sample, are presented.
Resumo:
Among those damage identification methods, the Wavelet Packet Energy Curvature Difference (WPECD) Method is an effective one. However, most of the existing methods rely on numerical simulation and are unverified via experiment, and very few of them have been applied to practice. In this paper, the validity of WPECD in structural damage identification is verified by a numerical example. A damage simulation experiment is taken on a real replaced girder at the Ziya River New Bridge in Cangzhou. Two damage cases are applied and the acceleration responses at the measuring points are obtained, based on which the damages are identified with the WPECD Method, and the influence of wavelet function and decomposition level is studied. The results show that the WPECD Method can identify structure damage efficiently and can be put into practice.
Resumo:
In this paper, a fuzzy logic controller (FLC) based variable structure control (VSC) is presented. The main objective is to obtain an improved performance of highly non-linear unstable systems. New functions for chattering reduction and error convergence without sacrificing invariant properties are proposed. The main feature of the proposed method is that the switching function is added as an additional fuzzy variable and will be introduced in the premise part of the fuzzy rules; together with the state variables. In this work, a tuning of the well known weighting parameters approach is proposed to optimize local and global approximation and modelling capability of the Takagi-Sugeno (T-S) fuzzy model to improve the choice of the performance index and minimize it. The main problem encountered is that the T-S identification method can not be applied when the membership functions are overlapped by pairs. This in turn restricts the application of the T-S method because this type of membership function has been widely used in control applications. The approach developed here can be considered as a generalized version of the T-S method. An inverted pendulum mounted on a cart is chosen to evaluate the robustness, effectiveness, accuracy and remarkable performance of the proposed estimation approach in comparison with the original T-S model. Simulation results indicate the potential, simplicity and generality of the estimation method and the robustness of the chattering reduction algorithm. In this paper, we prove that the proposed estimation algorithm converge the very fast, thereby making it very practical to use. The application of the proposed FLC-VSC shows that both alleviation of chattering and robust performance are achieved.
Resumo:
One of the most important design constraints of a climbing robot is its own weight. When links or legs are used as a locomotion system they tend to be composed of special lightweight materials, or four-bars-linkage mechanisms are designed to reduce the weight with small rigidity looses. In these cases, flexibility appears and undesirable effects, such as dynamics vibrations, must be avoided at least when the robot moves at low speeds. The knowledge of the real tip position requires the computation of its compliance or stiffness matrix and the external forces applied to the structure. Gravitational forces can be estimated, but external tip forces need to be measured. This paper proposes a strain gauge system which achieves the following tasks: (i) measurement of the external tip forces, and (ii) estimation of the real tip position (including flexibility effects). The main advantages of the proposed system are: (a) the use of external force sensors is avoided, and (b) a substantial reduction of the robot weight is achieved in comparison with other external force measurement systems. The proposed method is applied to a real symmetric climbing robot and experimental results are presented.
Resumo:
This article describes a knowledge-based application in the domain of road traffic management that we have developed following a knowledge modeling approach and the notion of problem-solving method. The article presents first a domain-independent model for real-time decision support as a structured collection of problem solving methods. Then, it is described how this general model is used to develop an operational version for the domain of traffic management. For this purpose, a particular knowledge modeling tool, called KSM (Knowledge Structure Manager), was applied. Finally, the article shows an application developed for a traffic network of the city of Madrid and it is compared with a second application developed for a different traffic area of the city of Barcelona.
Resumo:
The recent establishment of a digital culture and society, together with current financial crisis and urgent energetic and climatic needs, has radically changed the architectural scene from the optimism of some years ago to a situation of uncertainty and huge social demands and challenges. In this context, it is suggested to rethink the role of structure in architecture, such as an enabler, a guide and a catalyst. The purpose of this paper is to present the economic, cultural and social context in which architecture develops nowadays. The method, to suggest a discussion on which role the structure may adopt in the architecture to come. The achievement, to highlight its potential to face current requirements and challenges.
Resumo:
In this dissertation a new numerical method for solving Fluid-Structure Interaction (FSI) problems in a Lagrangian framework is developed, where solids of different constitutive laws can suffer very large deformations and fluids are considered to be newtonian and incompressible. For that, we first introduce a meshless discretization based on local maximum-entropy interpolants. This allows to discretize a spatial domain with no need of tessellation, avoiding the mesh limitations. Later, the Stokes flow problem is studied. The Galerkin meshless method based on a max-ent scheme for this problem suffers from instabilities, and therefore stabilization techniques are discussed and analyzed. An unconditionally stable method is finally formulated based on a Douglas-Wang stabilization. Then, a Langrangian expression for fluid mechanics is derived. This allows us to establish a common framework for fluid and solid domains, such that interaction can be naturally accounted. The resulting equations are also in the need of stabilization, what is corrected with an analogous technique as for the Stokes problem. The fully Lagrangian framework for fluid/solid interaction is completed with simple point-to-point and point-to-surface contact algorithms. The method is finally validated, and some numerical examples show the potential scope of applications.
Resumo:
The study of granular systems is of great interest to many fields of science and technology. The packing of particles affects to the physical properties of the granular system. In particular, the crucial influence of particle size distribution (PSD) on the random packing structure increase the interest in relating both, either theoretically or by computational methods. A packing computational method is developed in order to estimate the void fraction corresponding to a fractal-like particle size distribution.
Resumo:
This article presents a new and computationally efficient method of analysis of a railway track modelled as a continuous beam of 2N spans supported by elastic vertical springs. The main feature of this method is its important reduction in computational effort with respect to standard matrix methods of structural analysis. In this article, the whole structure is considered to be a repetition of a single one. The analysis presented is applied to a simple railway track model, i.e. to a repetitive beam supported on vertical springs (sleepers). The proposed method of analysis is based on the general theory of spatially periodic structures. The main feature of this theory is the possibility to apply Discrete Fourier Transform (DFT) in order to reduce a large system of q(2N + 1) linear stiffness equilibrium equations to a set of 2N + 1 uncoupled systems of q equations each. In this way, a dramatic reduction of the computational effort of solving the large system of equations is achieved. This fact is particularly important in the analysis of railway track structures, in which N is a very large number (around several thousands), and q = 2, the vertical displacement and rotation, is very small. The proposed method allows us to easily obtain the exact solution given by Samartín [1], i.e. the continuous beam railway track response. The comparison between the proposed method and other methods of analysis of railway tracks, such as Lorente de Nó and Zimmermann-Timoshenko, clearly shows the accuracy of the obtained results for the proposed method, even for low values of N. In addition, identical results between the proposed and the Lorente methods have been found, although the proposed method seems to be of simpler application and computationally more efficient than the Lorente one. Small but significative differences occur between these two methods and the one developed by Zimmermann-Timoshenko. This article also presents a detailed sensitivity analysis of the vertical displacement of the sleepers. Although standard matrix methods of structural analysis can handle this railway model, one of the objectives of this article is to show the efficiency of DFT method with respect to standard matrix structural analysis. A comparative analysis between standard matrix structural analysis and the proposed method (DFT), in terms of computational time, input, output and also software programming, will be carried out. Finally, a URL link to a MatLab computer program list, based on the proposed method, is given