Asphalt Cement Concrete Longitudinal Joint Adhesive Crafco PN 34524 (Iowa DOT New Product C-98-7), HR-2084, 2000

The joint between two lanes of asphalt pavement is often the first area of a roadway which shows signs of deterioration and requires maintenance. As the final lift of hot asphalt is being placed in a construction project, it is being forced p against the adjoining lane of cold asphalt, forming the longitudinal joint. The mating of the two lanes, to form a high quality seal, is often not fully successful and later results in premature stripping or raveling as water enters the unsealed joint. The application of a hot poured rubberized asphaltic joint sealant along the joint face in the final stage of construction should help to form a watertight joint seal. A new product, especially formulated for the longitudinal joint in asphalt pavements was proposed to improve joint sealing. The following describes the experimental application of the new product, Crafco, PN 34524.

Ralumac Latex Modified Asphalt, HR-2041, 1994

Some asphalt roadways tend to develop wheelpath ruts over time when exposed to heavy traffic. As the rutting increases in depth, the travel comfort and levels of safety decrease. A variety of remedies involving major or minor operations can be applied to eliminate ruts and renew the roadway surface. One of the simple remedies, called Ralumac microsurfacing, involves only a longitudinal band over the rut. For better coverage, ruts are filled initially and followed by a complete thin surface wearing cover over the roadway.

Development of an Improved Agricultural-Based Deicing Product, TR-581, 2010

Snow and ice removal on public streets is a critical part of the work of departments of transportation in northern U.S. states, including Iowa. Iowa is also a state rich in agricultural resources, some of which undergo industrial processes that generate a number of byproducts, e.g., in converting corn to ethanol or soy to biodiesel. It would be desirable to find those that, with a minimum of additional processing, can be used as a deicing compound, either alone or in combination with products currently in use. The focus of this work is therefore to investigate by-products from agricultural processes that may be suitable for use as deicing applications. This topic has been investigated in the past by others, with many patented products described in the literature. An initial screening was carried out to assess the potential acceptability of selected commercial products, as well as a glycerol developed for this project. Based on the variety of parameters tested, the product combination that shows the greatest promise for future application consists of 80% glycerol with 20% NaCl.

Evaluation of Fly Ash in Portland Cement Concrete Paving in Woodbury County, Iowa, HR-201, Construction Report, 1979

The earliest overall comprehensive work on the use of fly ash in concrete was reported by Davis and Associates of the University of California in 1937. Since that time there have been numerous applications of the use and varying proportions of fly ash in portland cement concrete mixes. Fly ash is a pozzolanic powdery by-product of the coal combustion process which is recovered from flue gases and is generally associated with electric power generating plants. Environmental regulations enacted in recent years have required that fly ash be removed from the flue gases to maintain clean air standards. This has resulted in an increased volume of high quality fly ash that is considered a waste product or a by-product that can be utilized in products such as portland cement concrete. There are several sources of the high quality fly ash located in Iowa currently producing a combined total of 281,000 tons of material annually. Due to recent cement shortages and the rapidly increasing highway construction costs, the Iowa Department of Transportation has become interested in utilizing fly ash in portland cement concrete paving mixes. A preliminary review of the Iowa Department of Transportation Materials Laboratory study indicates that a substitution of fly ash for portland cement, within limits, is ·not detrimental to the overall concrete quality. Also the use of fly ash in concrete would reduce the cement consumption as well as provide a potential cost savings in areas where high quality fly ash is available without excessive transportation costs. The previously expressed concerns have shown the need for a research project to develop our knowledge of fly ash replacement in the Iowa Department of Transportation portland cement concrete paving mixes.

Audit report on the Delaware County Solid Waste Disposal Commission for the year ended June 30, 2013

Audit report on the Delaware County Solid Waste Disposal Commission for the year ended June 30, 2013

Time-Temperature Strength-Reaction Product Relationships in Lime-Bentonite-Water Mixtures, HR-111, 1965

The interrelation of curing time, curing temperature, strength, and reactions in lime-bentonite-water mixtures was examined. Samples were molded at constant density and moisture content and then cured for periods of from 1 to 56 days at constant temperatures that ranged from 5C to 60C. After the appropriate curing time the samples were tested for unconfined compressive strength. The broken samples were then analyzed by x-ray diffractometer and spectrophotometer to determine the identity of the reaction products present after each curing period. It was found that the strength gain of lime-clay mixtures cured at different temperatures is due to different phases of the complex reaction, lime & clay to CSH(gel) to CSH(II) to CSH(I) to tobermorite. The farther the reaction proceeds, the higher the strength. There was also evidence of lattice substitutions in the structure of the calcium silicate hydrates at curing temperatures of 50C and higher. No consistent relationship between time, temperature, strength, and the S/A ration of reaction products existed, but in order to achieve high strengths the apparent C/S ration had to be less than two. The curing temperature had an effect on the strength developed by a given amount of reacted silica in the cured lime-clay mixture, but at a given curing temperature the cured sample that had the largest amount of reacted silica gave the highest strength. Evidence was found to indicate that during the clay reaction some calcium is indeed adsorbed onto the clay structure rather than entering into a pozzolanic reaction. Finally, it was determined that it is possible to determine the amount of silica and alumina in lime-clay reaction products by spectrophotometric analysis with sufficient accuracy for comparison purposes. The spectrophotometric analysis techniques used during the investigation were simple and were not time consuming.

Audit report on the Waste Authority of Jackson County for the year ended June 30, 2013

Audit report on the Waste Authority of Jackson County for the year ended June 30, 2013

Audit report on the North Central Iowa Regional Solid Waste Agency for the year ended June 30, 2013

Audit report on the North Central Iowa Regional Solid Waste Agency for the year ended June 30, 2013

Evaluation of Fly Ash in Portland Cement Concrete Paving in Woodbury County, Iowa, Final Report, HR-201, 1980

The earliest overall comprehensive work on the use of fly ash in concrete was reported by Davis and Associates of the University of California in 1937. Since that time, there have been numerous applications of the use and varying propertions of fly ash in portland cement concrete mixes. Fly ash is a pozzolanic powdery by-product of the coal combustion process which is recovered from flue gases and is, generally associated with electric power generating plants. Environmental regulations enacted in recent years have required that fly ash be removed from the flue gases to maintain clean air standards. This has resulted in an increased volume of high quality fly ash that is considered a waste product or a by-product that can be utilized in products such as portland cement concrete. There are several sources of the high quality fly ash located in Iowa currently producing a combined total of 281,000 tons of material annually.

Audit report on the Great River Regional Waste Authority for the year ended June 30, 2013

Audit report on the Great River Regional Waste Authority for the year ended June 30, 2013

SEPT4, a p53 target gene product, implicates p 53 in the regulation of exocytosis

Résumé : Le cancer, qui est responsable d'un quart des décès en Suisse, exhibe un état cellulaire désordonné, qui lui-même, est la conséquence d'un dérèglement des gènes. Le gène le plus fréquemment altéré, dans les cas de cancers humains, est p53. Ce gène encode un facteur de transcription, impliqué dans la régulation de nombreux gènes impliqués dans le cycle cellulaire, l'apoptose ou la différenciation. Notre laboratoire a récemment identifié seize nouveaux gènes, dont l'expression est régulée par p53, parmi lesquels sept4, su jet de cette thèse. La protéine 5EPT4 appartient à la famille des septines, qui est impliquée dans la cytokinèse. Dans ce travail, nous avons confirmé la régulation de l'expression de sept4 par p53 dans des tissus de souris, et étonnamment, seul un des deux promoteurs du gène sept4 est contrôlé par p53. En outre, l'approche immunohistologique nous a permis de supposer une implication de la protéine SEPT4 dans le mécanisme de l'exocytose. Cette hypothèse a été confirmée par l'interaction de SEPT4 avec la protéine syntaxine 1A, et par son activité inhibitrice sur la sécrétion stimulée. En élargissant l'étude de la protéine SEPT4, nous avons découvert que celle-ci avait comme partenaire fonctionnel, la protéine Pinl, une enzyme qui catalyse l'isomérisation cis-trans du lien peptidique précédant une proline. bans ce contexte, nous avons démontré que l'interaction entre ces deux protéines reposait sur le domaine WW de Pinl, un type de domaine reconnaissant les motifs phosphoséryl-prolyl et phosphothréonyl-prolyl. Ce dernier résultat nous a conduit à examiner la phosphorylation de 5EPT4. Nous avons démontré que la partie N-terminale de SEPT4 était phosphorylée par la kinase Cdk5. La co¬expression de Cdk5 et de SEPT4 stimule la dégradation de SEPT4, indépendamment de la voie du protéasome. Ainsi, l'ensemble de nos observations fournissent l'évidence de l'engagement de la protéine SEPT4 dans la régulation de l'exocytose, et soutiennent le rôle de p53 dans le contrôle de l'exocytose, via SEPT4, ce qui constituerait un nouveau rôle fonctionnel pour ce gardien du génome. Summary: Cancer, which is responsible for a quarter of the deaths in Switzerland, exhibits a disordered cellular state, which itself, is the consequence of an altered state of genes. The most frequently altered gene in human cancer is p53. This gene encodes a transcription factor, implicated in the regulation of numerous genes involved in cell cycle, apoptosis or differentiation. Our laboratory has recently identified sixteen new genes whose expression is regulated by p53, amongst them septin 4, which is the subject of this thesis. The SEPT4 protein belongs to the septin family which is implicated in cytokinesis. In the present work, we have confirmed the regulation of sept4 expression by p53 in mouse tissues, and surprisingly, only one of the two sept4 promoters is regulated by p53. In addition, the immunohistologic approach enabled us to suppose a role of SEPT4 in exocytosis. This assumption was confirmed by the interaction of SEPT4 with syntaxin 1A, and by its inhibiting activity on stimulated secretion. By widening the analysis of SEPT4, we identified Pin1 as an interacting protein. Pin1 is an enzyme which catalyzes the cis-trans isomerization of the peptide bond preceding a proline residue. In this context, we showed that the interaction between these two proteins depends on the WW domain of Pin 1. This domain has been shown to function as a phosphoserine- or phosphothreonine¬binding module. This last result prompted us to examine phosphorylation of SEPT4. We demonstrated that the N-terminal portion of SEPT4 was phosphorylated by the Cdk5 kinase. The co-expression of Cdk5 with 5EPT4 stimulates SEPT4 degradation, independently of the proteasome pathway. Thus, these observations provide evidence for the engagement of SEPT4 in the regulation of exocytosis, and supports the role of p53 in the control of exocytosis, via SEPT4, which constitutes a new functional role for this guardian of the genome.

Audit report on the Rathbun Area Solid Waste Commission for the year ended June 30, 2014

Audit report on the Rathbun Area Solid Waste Commission for the year ended June 30, 2014

Audit report on the Shelby County Area Solid Waste Agency for the year ended June 30, 2014

Audit report on the Shelby County Area Solid Waste Agency for the year ended June 30, 2014

Lactate and the injured brain: friend or foe?

PURPOSE OF REVIEW: Energy metabolism is increasingly recognized as a key factor in the pathogenesis of acute brain injury (ABI). We review the role of cerebral lactate metabolism and summarize evidence showing that lactate may act as supplemental fuel after ABI. RECENT FINDINGS: The role of cerebral lactate has shifted from a waste product to a potentially preferential fuel and signaling molecule. According to the astrocyte-neuron lactate shuttle model, glycolytic lactate might act as glucose-sparing substrate. Lactate also is emerging as a key signal to regulate cerebral blood flow (CBF) and a neuroprotective agent after experimental ABI. Clinical investigation using cerebral microdialysis shows the existence of two main lactate patterns, ischemic - from anaerobic metabolism - and nonischemic, from activated glycolysis, whereby lactate can be used as supplemental energy fuel. Preliminary clinical data suggests hypertonic lactate solutions improve cerebral energy metabolism and are an effective treatment for elevated intracranial pressure (ICP) after ABI. SUMMARY: Lactate can be a supplemental fuel for the injured brain and is important to regulate glucose metabolism and CBF. Exogenous lactate supplementation may be neuroprotective after experimental ABI. Recent clinical data from ABI patients suggest hypertonic lactate solutions may be a valid therapeutic option for secondary energy dysfunction and elevated ICP.

A semi-grand canonical Monte Carlo simulation model for ion binding to ionizable surfaces: proton binding of carboxylated latex particles as a case study

In this paper, we present a computer simulation study of the ion binding process at an ionizable surface using a semi-grand canonical Monte Carlo method that models the surface as a discrete distribution of charged and neutral functional groups in equilibrium with explicit ions modelled in the context of the primitive model. The parameters of the simulation model were tuned and checked by comparison with experimental titrations of carboxylated latex particles in the presence of different ionic strengths of monovalent ions. The titration of these particles was analysed by calculating the degree of dissociation of the latex functional groups vs. pH curves at different background salt concentrations. As the charge of the titrated surface changes during the simulation, a procedure to keep the electroneutrality of the system is required. Here, two approaches are used with the choice depending on the ion selected to maintain electroneutrality: counterion or coion procedures. We compare and discuss the difference between the procedures. The simulations also provided a microscopic description of the electrostatic double layer (EDL) structure as a function of p H and ionic strength. The results allow us to quantify the effect of the size of the background salt ions and of the surface functional groups on the degree of dissociation. The non-homogeneous structure of the EDL was revealed by plotting the counterion density profiles around charged and neutral surface functional groups.