Tratamento termoquímico do titânio auxiliado por plasma de ar - N2 - O2

Discs were grade II cp Ti oxynitride by plasma of Ar - N2 - O2 using different proportions of individual gases. These ratios were established from analysis of optical emission spectroscopy (OES) of plasma species. The proportions that resulted in species whose spectra showed an abrupt change of light intensity were chosen for this study. Nanohardness tests revealed that there was a correlation between the intensity of N2 + species with the hardness, because the treatments where they had a higher intensity, obtained a higher value nanohardness, although the crystalline phases have remained unchanged. With respect to topography, it was observed that in general, the surface roughness is related to the intensities of plasma species, because they may have different values depending on the behavior of the species. Images obtained by optical microscopy revealed a surface with grains of different colors to optical reflectance showed a peak of reflection in the red area. Measures the contact angle and surface tension showed hydrophilic properties and hydrophilic with little variation of polar and dispersive components of surface tension

Influência das espécies ativas na absorção de intersticiais durante a carbonitretação a plasma do TI

Physical-chemical properties of Ti are sensible to the presence of interstitial elements. In the case of thermochemical treatments plasma assisted, the influence of different active species is not still understood. In order to contribute for such knowledge, this work purposes a study of the role played by the active species atmosphere into the Ar N2 CH4 carbonitriding plasma. It was carried out a plasma diagnostic by OES (Optical Emission Spectroscopy) in the z Ar y N2 x CH4 plasma mixture, in which z, y and x indexes represent gas flow variable from 0 to 4 sccm (cm3/min). The diagnostic presents abrupt variations of emission intensities associated to the species in determined conditions. Therefore, they were selected in order to carry out the chemical treatment and then to investigate their influences. Commercial pure Ti disks were submitted to plasma carbonitriding process using pre-established conditions from the OES measurements while some parameters such as pressure and temperature were maintained constant. The concentration profiles of interstitial elements (C and N atoms) were determined by Resonant Nuclear Reaction Analysis (NRA) resulting in a depth profile plots. The reactions used were 15N(ρ,αγ)12C and 12C(α,α)12C. GIXRD (Grazing Incidence X-Ray Diffraction) analysis was used in order to identify the presence of phases on the surface. Micro-Raman spectroscopy was used in order to qualitatively study the carbon into the TiCxN1 structure. It has been verified which the density species effectively influences more the diffusion of particles into the Ti lattice and characteristics of the layer formed than the gas concentration. High intensity of N2 + (391,4 nm) and CH (387,1 nm) species promotes more diffusion of C and N. It was observed that Hα (656,3 nm) species acts like a catalyzer allowing a deeper diffusion of nitrogen and carbon into the titanium lattice.

Manejo del dolor en un caso de neuromielitis óptica (enfermedad de Devic)

La neuromielitis óptica (NMO) o enfermedad de Devic es un trastorno autoinmune, inflamatorio y desmielinizante, que afecta principalmente al nervio óptico y la médula espinal. El cuadro clínico está caracterizado por dolor de tipo neuropático, patrón de pérdida de la visión y aparición de fenómenos visuales positivos, como fosfenos inducidos por movimiento. En lesiones activas se ha demostrado que hay amplificación del dolor, esencialmente por acción excitatoria por niveles excesivos de glutamato. En las lesiones establecidas, la pérdida de los astrocitos representa la generalidad del cuadro. El dolor en la enfermedad de Devic es más frecuente y grave que en la esclerosis múltiple, y tiene un grave impacto en la vida cotidiana. Hay literatura que refiere resultados aislados con carbamazepina. En este caso clínico, se ve claramente el efecto analgésico con disminución de los espasmos dolorosos de carbamazepina y neuromoduladores + opioides fuertes en combinación con psicoterapia para disminuir niveles de ansiedad y depresión y lograr un manejo integral del dolor.

Influência dos parâmetros de processo na deposição de nitreto de titânio por plasma em gaiola catódica

Titanium nitride films were grown on glass using the Cathodic Cage Plasma Deposition technique in order to verify the influence of process parameters in optical and structural properties of the films. The plasma atmosphere used was a mixture of Ar, N2 and H2, setting the Ar and N2 gas flows at 4 and 3 sccm, respectively and H2 gas flow varied from 0, 1 to 2 sccm. The deposition process was monitored by Optical Emission Spectroscopy (OES) to investigate the influence of the active species in plasma. It was observed that increasing the H2 gas flow into the plasma the luminescent intensities associated to the species changed. In this case, the luminescence of N2 (391,4nm) species was not proportional to the increasing of the H2 gas into the reactor. Other parameters investigated were diameter and number of holes in the cage. The analysis by Grazing Incidence X-Ray Diffraction (GIXRD) confirmed that the obtained films are composed by TiN and they may have variations in the nitrogen amount into the crystal and in the crystallite size. The optical microscopy images provided information about the homogeneity of the films. The atomic force microscopy (AFM) results revealed some microstructural characteristics and surface roughness. The thickness was measured by ellipsometry. The optical properties such as transmittance and reflectance (they were measured by spectrophotometry) are very sensitive to changes in the crystal lattice of the material, chemical composition and film thicknesses. Therefore, such properties are appropriate tools for verification of this process control. In general, films obtained at 0 sccm of H2 gas flow present a higher transmittance. It can be attributed to the smaller crystalline size due to a higher amount of nitrogen in the TiN lattice. The films obtained at 1 and 2 sccm of H2 gas flow have a golden appearance and XRD pattern showed peaks characteristics of TiN with higher intensity and smaller FWHM (Full Width at Half Maximum) parameter. It suggests that the hydrogen presence in the plasma makes the films more stoichiometric and becomes it more crystalline. It was observed that with higher number of holes in the lid of the cage, close to the region between the lid and the sample and the smaller diameter of the hole, the deposited film is thicker, which is justified by the most probability of plasma species reach effectively the sample and it promotes the growth of the film

Estudo da viabilidade técnica para obtenção de superfície duplex em aço inoxidável martensítico AISI 410 através do processo de deposição a plasma por gaiola catódica

The technique of plasma nitriding by the cathode cage mainly stands out for its ability to produce uniform layers, even on parts with complex geometries. In this study, it was investigated the efficiency of this technique for obtaining duplex surface, when used, simultaneously, to nitriding treatment and thin film deposition at temperatures below 500°C. For this, were used samples of AISI 41 0 Martensitic Stainless Steel and performed plasma treatment, combining nitriding and deposition of thin films of Ti and/or TiN in a plasma atmosphere containing N2-H2. It was used a cathodic cage of titanium pure grade II, cylindrical with 70 mm diameter and 34 mm height. Samples were treated at temperature 420ºC for 2 and 12 hours in different working pressures. Optical Microscopy (OM), Scanning Electron Microscopy (SEM) with micro-analysis by Energy Dispersive Spectroscopy (EDS), X-Ray Diffraction (XRD), Atomic Force Microscopy (AFM) and analysis of Vickers Microhardness were used to investigate coating properties such as homogeneity and surface topography, chemical composition, layer thickness, crystalline phase, roughness and surface microhardness. The results showed there is a direct proportionality between the presence of H2 in plasma atmosphere and the quantity of titanium in surface chemical composition. It was also observed that the plasma treatment at lowpressure is more effective in formation of TiN thin film

Diagnóstico das espécies ativas do plasma usado em tratamentos termoquímicos do titânio

Plasma diagnostics by Optical Emission Spectroscopy were performed for electrical discharge in three gas mixture respecting the combinations z N2 y Ar x H2, z N2 y Ar x O2 e z N2 y Ar x CH4, in which the indexes z and y systematically vary from 1 to 4 and x varies from 0 to 4, every one has dimension SCCM, resulting in 80 combinations. From the all obtained spectrums, the species CH (387,1 nm), N2+ (391,4 nm), Hβ (486,1 nm), Hα (656,3 nm), Ar (750,4 nm), O (777,4 nm) e O (842,6 nm) were analyzed because of their abundance and importance on the kinetic of reaction from the plasma to surface, besides their high dependences on the gases flows. Particularly interesting z, y and x combinations were chosen in order to study the influence of active species on the surface modification during the thermochemical treatment. From the mixtures N2 Ar O2 e N2 Ar CH4 were chosen three peculiar proportions which presented luminous intensity profile with unexpected maximum or minimum values, denominated as plasma anomaly. Those plasma concentrations were utilized as atmosphere of titanium treatment maintaining constant the control parameters pressure and temperature. It has been verified a relation among luminous intensity associated to N2+ and roughness, nanohardness and O atoms diffusion into the crystalline lattice of treated titanium and it has been seen which those properties becomes more intense precisely in the higher points found in the optical profile associated to the N2+ specie. Those parameters were verified for the mixture which involved O2 gas. For the mixture which involves CH4 gas, the relation was determinate by roughness, number of nitrogen and carbon atoms diffused into the titanium structure which presented direct proportionality with the luminous intensity referent to the N2+ and CH. It has been yet studied the formation of TiCN phases on the surface which presented to be essentially directly proportional to the increasing of the CH specie and inversely proportional to the increasing of the specie N2+

Desenvolvimento de método para discriminação entre marcas de uísque e identificação de adulteração por espectroscopia UV-Vis e PLS-DA

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2015.

Fabricación y caracterización de películas delgadas de óxidos transparentes con aplicaciones ópticas.

Los óxidos transparentes conductores (TCO′ s) son materiales compuestos conformados por oxígeno y un metal, que presentan una combinación única de alta estabilidad química, alta concentración electrónica y alta transparencia óptica. Por esta razón, el procesamiento de TCO′ s en película delgada va orientado hacia aplicaciones específicas tales como ventanas ópticas en celdas solares, sensores de gases, electrodos en dispositivos de pantallas planas, ventanas inteligentes. En este proyecto se trabajó en la síntesis experimental de dos TCO′ s relevantes tanto en investigación fundamental como en aplicaciones tecnológicas: el óxido de indio (In2O3) y el óxido de estaño (SnO2). Ambos TCO′ s se depositaron por la técnica de erosión iónica reactiva por corriente directa (DC). Para el análisis de las películas se utilizaron varias técnicas de caracterización: difracción de rayos X, espectroscopia UV-Visible, resistividad eléctrica, efecto Hall, así como microscopías electrónica de barrido y de fuerza atómica. Se fabricó también una bicapa de In2O3/SnO2, la cual se caracterizó además con espectroscopia de fotoemisión de rayos X (XPS).En esta tesis se reporta por primera vez la síntesis y caracterización de esta bicapa, la cual abre una línea de investigación en el área de interfaces. Asimismo, se desarrolló e implementó un procedimiento, basado en los modelos ópticos, tal que permite obtener parámetros que se utilizan para evaluar a cualquier película delgada TCO como potencial metamaterial. Las propiedades de las muestras se analizaron en función de la temperatura aplicada post-depósito: temperatura ambiente (TA), 100oC, 200oC, 300oC, bajo una atmósfera de argón o argón-oxígeno. Los resultados confirman que las películas presentan un crecimiento de tipo poli cristalino. Además, la calidad cristalina tiende a incrementarse como función del incremento de la temperatura. El In2O3 creció con estructura cúbica bcc (a=10.11 ˚A, ICDD #71-2195). A partir de 200C, se detectaron trazas de la fase romboédrica (a=5.490 ˚A, c=14.520 ˚A, ICDD #73-1809). Asimismo, el SnO2 creció con estructura tetragonal (a = 4.737 ˚A, c = 3.186 ˚A, ICDD #88-0287). Las películas de In2O3 poseen una transparencia promedio del 90 % en una ventana de 500 nm a 1100 nm. El borde de absorción se recorre al azul como función de la temperatura, de Eg=3.3 eV a Eg=3.7 eV por el efecto Burstein-Moss. Por otra parte, la bicapa presentó una interfaz claramente definida, sin difusión de especies metálicas. Al incrementarse la temperatura, de TA a 400oC, se detectaron dos fases de óxido de estaño: SnO2 y SnO, en un porcentaje atómico de ≈70 %:30 %, respectivamente. Se concluye que los parámetros y valores obtenidos de las películas como son el texturizado y espesor homogéneo, alta transparencia, crecimiento preferencial, ancho prohibido y resistividad eléctrica, son comparables a los que se requieren del In2O3 y SnO2 en película delgada para aplicaciones optoelectrónicas.

Análise de conversores de frequência óptica baseados em amplificadores ópticos semicondutores

Dissertação de mest. em Engenharia de Sistemas e Computação, Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2002

Construção de um aparato experimental para monitoramento in situ da deposição de filmes finos de titânio por magnetron sputtering

The technique of surface coating using magnetron sputtering is one of the most widely used in the surface engineering, for its versatility in obtaining different films as well as in the micro / nanometric thickness control. Among the various process parameters, those related to the active species of the plasma are of the most fundamental importance in the mechanism and kinetics of deposition. In order to identify the active species of the plasma, parameters such as gas flow, pressure and density of electric power were varied during titanium coating on glass substrate. By flowing argon gas of 10, 20, 30, 40 and 50 sccm (cubic centimeters per minute) for each gas flow a sequential scan of the electric current of 0.10, 0.20, 0.30, 0.40 , 0.50 A. The maximum value of 0.50 A was chosen based both on literature data and on limitations of the equipment. The monitoring of plasma species present during the deposition was carried out in situ by the technique of optical emission spectroscopy (OES) through the spectrometer Ocean Optics USB2000 Series. For this purpose, an apparatus was developed to adapt the OES inside the plasma reactor to stay positioned closest to the target. The radiations emitted by the species were detected by an optical fiber placed behind the glass substrate and their intensities as a function of wavelength were, displayed on a monitor screen. The acquisition time for each condition of the plain parameters was related to the minima of spectral lines intensities due to the film formed on the substrate. The intensities of different emission lines of argon and titanium were then analyzed as a function of time, to determine the active species and estimate the thickness of the deposited films. After the deposition, the coated glasses thin films were characterized by optical transmittance through an infrared laser. It was found that the thickness and deposition rate determined by in situ analysis were consistent with the results obtained by laser transmittance

Redução aluminotérmica do óxido de tântalo usando uma tocha de plasma como ignitor

In this work was used a plasma torch of non transferred arc with argon as work gas, using a power supply with maximum DC current of 250 A and voltage of 30 V to activate the plasma and keep it switched on. The flame temperature was characterized by optical emission spectroscopy, through Boltzmann-plot-method. The torch has been used like igniter in the aluminothermic reduction of the mixture tantalum oxide and aluminum, seeking to obtain metallic tantalum. In heating of the reagents only one particle will be considered to study interactions between plasma-particle, seeking to determinate its fusion and residence time. The early powders were characterized by laser granulometry, scanning electron microscopy (SEM) and X-ray diffraction analysis. The final product of this reaction was characterized by SEM and X-ray diffraction. Crystallite size was calculated by the Scherrer equation and microdeformation was determined using Willamsom-Hall graph. With Rietveld method was possible to quantify the percentile in weight of the products obtained in the aluminothermic reaction. Semi-quantitative chemical analysis (EDS) confirmed the presence of metallic tantalum and Al2O3 as products of the reduction. As was waited the particle size of the metallic tantalum produced, presents values in nanometric scale due the short cooling time of those particles during the process

Densidad óptica en embarazadas normales y madurez pulmonar fetal. Estudio en el líquido amniótico. Hospital Vicente Corral Moscoso. Cuenca -Ecuador 1999

Se realiza un estudio de tipo clínico-descriptivo con el objeto de determinar la presencia de pigmentos bilirrubinoides y la madurez pulmonar, comprado el Test de Clements con la edad gestacional y el estado clínico del recién nacido. Se tomó a cincuenta pacientes embarazadas entre 37 y 41 semanas de gestación, sin factores de riesgo y sus recién nacidos, atendidos mediante cesárea o parto vaginal, en el Centro Obstétrico del Hospital Vicente Corral Moscoso de la ciudad de Cuenca en 1999. Se realizaron las determinaciones basados en los parámetros recomendados a nivel internacional concluyendo que: 1 En las embarazadas a término de la gestación, la determinación de la presencia de pigmentos bilirrubinoides en líquido ammniótico corresponde a la zona 1 de la gráfica de Liley, interpretada como exenta de riesgo para los recién nacidos, de acuerdo con los parámetros que se registran en la literatura médica actual. 2. La prueba de Clements positiva guarda estrecha relación con la madurez del recién nacido expresada por Capurro y con una adecuada función respiratoria expresada por un puntaje normal de Silverman en todos los casos. 3. En caso de usarse la prueba de Clements, es la prueba de un tubo, suficiente para valorar la madurez pulmonar por su alta confiabilidad y bajo costo. 4. Por lo tanto los autores recomendamos que se incluya la aplicación de estas dos pruebas, que son de fácil realización, como parte del protocolo de atención materno-infantil en el Centro Obstétrico del Hospital Vicente Corral Moscoso

La enseñanza de la matemática desde una óptica vigotskiana

A partir de la pasada década comenzaron a tener auge, en el ámbito de la matemática educativa, las ideas de Vigotsky y su teoría psicológica; sin embargo, aún entre los docentes e investigadores latinoamericanos se conoce poco sobre los principales presupuestos de su teoría psicológica y lo más importante, de sus implicaciones para la enseñanza de las matemáticas. El enfoque histórico-cultural ha servido durante muchos años de referente teórico en las investigaciones educativas en Cuba, influidas por la formación de profesionales cubanos de alto nivel en la desaparecida Unión Soviética y enriquecidas por ese laboratorio permanente que es la práctica educacional cubana. Este trabajo tiene como objetivo divulgar entre los profesores e investigadores de la comunidad de educadores matemáticos latinoamericanos, los principales presupuestos teóricos de esta escuela psicológica, significándolos en el contexto de la enseñanza y aprendizaje de las matemáticas, aunque con énfasis especial en el nivel superior, a tono con el nivel de enseñanza donde el autor desarrolla sus investigaciones.

Elaboración de un plan de negocios para la implementación de una óptica con consultorio optométrico en la localidad de Suba, Bogotá

Tesis (Optometra). -- Universidad de La Salle, Facultad de Ciencias de La Salud. Programa de Optometria, 2014