992 resultados para driving simulation
Resumo:
Over the past several decades there has been a sharp increase in the number of studies focused on the relationship between vision and driving. The intensified attention to this topic has most likely been stimulated by the lack of an evidence basis for determining vision standards for driving licensure and a poor understanding about how vision impairment impacts driver safety and performance. Clinicians depend on the literature on vision and driving to advise visually impaired patients appropriately about driving fitness. Policy makers also depend on the scientific literature in order to develop guidelines that are evidence-based and are thus fair to persons who are visually impaired. Thus it is important for clinicians and policy makers alike to understand how various study designs and measurement methods should be interpreted so that the conclusions and recommendations they make are not overly broad, too narrowly constrained, or even misguided. We offer a methodological framework to guide interpretations of studies on vision and driving that can also serve as a heuristic for researchers in the area. Here, we discuss research designs and general measurement methods for the study of vision as they relate to driver safety, driver performance, and driver-centered (self-reported) outcomes.
Resumo:
A quantitative understanding of outdoor air quality in school environments is crucial given that air pollution levels inside classrooms are significantly influenced by outdoor pollution sources. To date, only a handful of studies have been conducted on this important topic in developing countries. The aim of this study was to quantify pollutant levels in the outdoor environment of a school in Bhutan and assess the factors driving them. Measurements were conducted for 16 weeks, spanning the wet and dry seasons, in a rural school in Bhutan. PM10, PM2.5, particle number (PN) and CO were measured daily using real-time instruments, while weekly samples for volatile organic compounds (VOCs), carbonyls and NO2 were collected using a passive sampling method. Overall mean PM10 and PM2.5 concentrations (µg/m3) were 27 and 13 for the wet, and 36 and 29 for the dry season, respectively. Only wet season data were available for PN concentrations, with a mean of 2.56 × 103 particles/cm3. Mean CO concentrations were below the detection limit of the instrumentation for the entire measurement period. Only low levels of eight VOCs were detected in both the wet and dry seasons, which presented different seasonal patterns in terms of the concentration of different compounds. The notable carbonyls were formaldehyde and hexaldehyde, with mean concentrations (µg/m3) of 2.37 and 2.41 for the wet, and 6.22 and 0.34 for the dry season, respectively. Mean NO2 cocentration for the dry season was 1.7 µg/m3, while it was below the detection limit of the instrumentation for the wet season. The pollutant concentrations were associated with a number of factors, such as cleaning and combustion activities in and around the school. A comparison with other school studies showed comparable results with a few of the studies, but in general, we found lower pollutant concentrations in the present study.
Resumo:
This paper explores novel driving experiences that make use of gamification and augmented reality in the car. We discuss our design considerations, which are grounded in road safety psychology and video game design theory. We aim to address the tension between safe driving practices and player engagement. Specifically, we propose a holistic, iterative thinking process inspired by game design cognition and share our insights generated through the application of this process. We present preliminary game concepts that blend digital components with physical elements from the driving environment. We further highlight how this design process helped us to iteratively evolve these concepts towards being safer while maintaining fun. These insights and game design cognition itself will be useful to the AutomotiveUI community investigating similar novel driving experiences.
Resumo:
Background The overrepresentation of young drivers in road crashes, injuries and fatalities around the world has resulted in a breadth of injury prevention efforts including education, enforcement, engineering, and exposure control. Despite multifaceted intervention, the young driver problem remains a challenge for injury prevention researchers, practitioners and policy-makers. The intractable nature of young driver crash risks suggests that a deeper understanding of their car use – that is, the purpose of their driving – is required to inform the design of more effective young driver countermeasures. Aims This research examined the driving purpose reported by young drivers, including the relationship with self-reported risky driving behaviours including offences. Methods Young drivers with a Learner or Provisional licence participated in three online surveys (N1 = 656, 17–20 years; N2 = 1051, 17–20 years; N3 = 351, 17–21 years) as part of a larger state-wide project in Queensland, Australia. Results A driving purpose scale was developed (the PsychoSocial Purpose Driving Scale, PSPDS), revealing that young drivers drove for psychosocial reasons such as for a sense of freedom and to feel independent. Drivers who reported the greatest psychosocial purpose for driving were more likely to be male and to report more risky driving behaviours such as speeding. Drivers who deliberately avoided on-road police presence and reported a prior driving-related offence had significantly greater PSPDS scores, and higher reporting of psychosocial driving purposes was found over time as drivers transitioned from the supervised Learner licence phase to the independent Provisional (intermediate) licence phase. Discussion and conclusions The psychosocial needs met by driving suggest that effective intervention to prevent young driver injury requires further consideration of their driving purpose. Enforcement, education, and engineering efforts which consider the psychosocial purpose of the driving are likely to be more efficacious than those which presently do not. Road safety countermeasures could reduce the young driver’s exposure to risk through such mechanisms as encouraging the use of public transport.
Resumo:
A long-period magnetotelluric (MT) survey, with 39 sites covering an area of 270 by 150 km, has identified melt within the thinned lithosphere of Pleistocene-Holocene Newer Volcanics Province (NVP) in southeast Australia, which has been variously attributed to mantle plume activity or edge-driven mantle convection. Two-dimensional inversions from the MT array imaged a low-resistivity anomaly (10-30Ωm) beneath the NVP at ∼40-80 km depth, which is consistent with the presence of ∼1.5-4% partial melt in the lithosphere, but inconsistent with elevated iron content, metasomatism products or a hot spot. The conductive zone is located within thin juvenile oceanic mantle lithosphere, which was accreted onto thicker Proterozoic continental mantle lithosphere. We propose that the NVP owes its origin to decompression melting within the asthenosphere, promoted by lithospheric thickness variations in conjunction with rapid shear, where asthenospheric material is drawn by shear flow at a "step" at the base of the lithosphere.
Resumo:
This program is a research based, guided intervention program, designed for first time drink driving offenders which provides them with information and strategies to avoid drink driving in the future. It is an innovative program with the ability to tailor specific information to different individuals based on their level of risk of reoffending and help them develop their own plan to prevent them from drink driving. It aims to teach offenders the skills to implement their own plan when they determine they are at risk of future drink driving. The program provides information about: What a standard drink is and how blood alcohol content (BAC) is determined; How alcohol affects the body, reaction time, and decision making; The consequences of drink driving and what happens after a second offence; How to deal with risky drink driving situations in the future; How to build a personalised plan to avoid drink driving in the future, and; Levels of alcohol consumption and its impact on daily life. It also includes access to a mobile friendly web app that can be used anytime after completing the program. This is tool that will aid offenders in tracking their drinks and build on plans to prevent future drink driving.
Resumo:
Objective The objective of this study was to determine the roadside prevalence of alcohol-impaired driving among drivers and riders in northern Ghana. The study also verifies motorists’ perception on their own alcohol use and knowledge of legal Blood Alcohol Concentration (BAC) limit of Ghana. Method With the assistance of police, the systematic random sampling was used to collect data at roadblocks using a cross-sectional study design. Breathalyzers were used to screen whether motorists had detectable alcohol in their breath and a follow-up breath tests conducted to measure the actual breath alcohol levels among positive participants. Results In all, 9.7% of the 789 participants had detectable alcohol among whom 6% exceeded the legal (BAC) limit of 0.08%. The prevalence of alcohol-impaired driving/riding was highest among cyclists (10% of all cyclists breath tested) followed by truck drivers 9% and motorcyclists (7% of all motorcyclists breath tested). The occurrence of a positive BAC among cyclists was about 8 times higher, (OR=7.73; p<0.001) and 2 times higher, among motorcyclists (OR=2.30; p=0.039) compared with private car drivers. The likelihood for detecting a positive BAC among male motorists/riders was higher than females (OR=1.67; p=0.354). The odds for detecting a positive BAC among weekend motorists/riders was significantly higher than weekdays (OR=2.62; p=0.001). Conclusion Alcohol-impaired driving/riding in Ghana is high by international standards. In order to attenuate the harmful effects of alcohol misuse such as alcohol-impaired driving/riding, there is the need to educate road users about how much alcohol they can consume and stay below the legal limit. The police should also initiate random breath testing to instil the deterrence of detection, certainty of apprehension and punishment, and severity and celerity of punishment among drink-driving motorists and riders.
Resumo:
Two experimental studies were conducted to examine whether the stress-buffering effects of behavioral control on work task responses varied as a function of procedural information. Study 1 manipulated low and high levels of task demands, behavioral control, and procedural information for 128 introductory psychology students completing an in-basket activity. ANOVA procedures revealed a significant three-way interaction among these variables in the prediction of subjective task performance and task satisfaction. It was found that procedural information buffered the negative effects of task demands on ratings of performance and satisfaction only under conditions of low behavioral control. This pattern of results suggests that procedural information may have a compensatory effect when the work environment is characterized by a combination of high task demands and low behavioral control. Study 2 (N=256) utilized simple and complex versions of the in-basket activity to examine the extent to which the interactive relationship among task demands, behavioral control, and procedural information varied as a function of task complexity. There was further support for the stress-buffering role of procedural information on work task responses under conditions of low behavioral control. This effect was, however, only present when the in-basket activity was characterized by high task complexity, suggesting that the interactive relationship among these variables may depend on the type of tasks performed at work.
Resumo:
Aims To better understand the knowledge and behaviors of drunk-driving offenders relating to alcohol use and driving in the context of recently amended Chinese legislation, and to investigate the involvement of alcohol-use disorders. Design The study was a cross-sectional survey conducted in 2012. Setting and participants: Data were collected at a local jail and 101 participants were recruited while in detention. Measures Questionnaire items examined demographic characteristics as well as practices and knowledge relating to alcohol use and driving. The Alcohol Use Disorders Identification Test (AUDIT) was used to assess hazardous drinking levels. Findings Knowledge about the two legal limits for “drink driving” and for “drunk driving” was low, at 28.3% and 41.4%, respectively. AUDIT scores indicated that a substantial proportion of the offenders had high levels of alcohol-use disorders. Higher AUDIT scores were found among the least experienced drivers, those who lacked knowledge about the legal limits, and recidivist drunk drivers. Conclusions Limited awareness of legal alcohol limits might contribute to offending; high AUDIT scores suggest that hazardous drinking levels may also contribute. This study provides important information to assist in refining community education and prevention efforts.
Resumo:
Objective: Drink driving contributes to significant levels of injury and economic loss in China but is not well researched. This study examined knowledge, drink-driving practices, and alcohol misuse problems among general drivers in Yinchuan. The objectives were to gain a better understanding of drink driving in Yinchuan, identify areas that need to be addressed, and compare the results with a similar study in Guangzhou. Methods: This was a cross-sectional study with a survey designed to collect information on participants’ demographic characteristics and their knowledge and practices in relation to drinking and driving. The survey was composed of questions on knowledge and practices in relation to drink driving and was administered to a convenience sample of 406 drivers. Alcohol misuse problems were assessed by using the Alcohol Use Disorders Identification Test (AUDIT). Results: Males accounted for the main proportion of drivers sampled from the general population (“general drivers”). A majority of general drivers in both cities knew that drunk driving had become a criminal offense in 2011; however, knowledge of 2 legal blood alcohol concentration (BAC) limits was quite low. Fewer drivers in Yinchuan (22.6%) than in Guangzhou (27.9) reported having been stopped by police conducting breath alcohol testing at least once in the last 12 months. The mean AUDIT score in Yinchuan (M = 8.2) was higher than that in Guangzhou (M = 7.4), and the proportion of Yinchuan drivers with medium or higher alcohol misuse problems (31.2%) was correspondingly higher than in Guangzhou (23.1%). In Yinchuan, males had a significantly higher AUDIT score than females (t = 3.454, P < .001), similar to Guangzhou. Multiple regression analyses were conducted on potential predictors of the AUDIT score (age, gender, monthly income, education level, years licensed, and age started drinking). There were significant individual contributions of gender (beta = 0.173, P = .09) and age at which drinking started (beta = 0.141, P = .033), but the overall model for Yinchuan was not significant, unlike Guangzhou. Conclusions: The results show that there are shortfalls in knowledge of the legislation and how to comply with it and deficiencies in police enforcement. In addition, there was evidence of drink driving and drink riding at high levels in both cities. Recommendations are made to address these issues.
Resumo:
The impairing effect from sleepiness is a major contributor to road crashes. The ability of a sleepy driver to perceive their level of sleepiness is an important consideration for road safety as well as the type of sleepiness countermeasure used by drivers as some sleepiness countermeasures are more effective than others. The aims of the current study were to determine the extent that the signs of driver sleepiness were associated with sleepy driving behaviours, as well as determining which individual factors (demographic, work, driving, and sleep-related factors) were associated with using a roadside or in-vehicle sleepiness countermeasure. A sample of 1518 Australian drivers from the Australian State of New South Wales and the neighbouring Australian Capital Territory took part in the study. The participants’ experiences with the signs of sleepiness were reasonably extensive. A number of the early signs of sleepiness (e.g., yawning, frequent eye blinks) were related with continuing to drive while sleepy, with the more advanced signs of sleepiness (e.g., difficulty keeping eyes open, dreamlike state of consciousness) associated with having a sleep-related close call. The individual factors associated with using a roadside sleepiness countermeasure included age (being older), education (tertiary level), difficulties getting to sleep, not continuing to drive while sleepy, and having experienced many signs of sleepiness. The results suggest that these participants have a reasonable awareness and experience with the signs of driver sleepiness. Factors related to previous experiences with sleepiness were associated with implementing a roadside countermeasure. Nonetheless, the high proportions of drivers performing sleepy driving behaviours, suggest that concerted efforts are needed with road safety campaigns regarding the dangers of driving while sleepy.
Resumo:
As a new research method supplementing the existing qualitative and quantitative approaches, agent-based modelling and simulation (ABMS) may fit well within the entrepreneurship field because the core concepts and basic premises of entrepreneurship coincide with the characteristics of ABMS (McKelvey, 2004; Yang & Chandra, 2013). Agent-based simulation is a simulation method based on agent-based models. The agentbased models are composed of heterogeneous agents and their behavioural rules. By repeatedly carrying out agent-based simulations on a computer, the simulations reproduce each agent’s behaviour, their interactive process, and the emerging macroscopic phenomenon according to the flow of time. Using agent-based simulations, researchers may investigate temporal or dynamic effects of each agent’s behaviours.
Resumo:
Purpose Traditional construction planning relies upon the critical path method (CPM) and bar charts. Both of these methods suffer from visualization and timing issues that could be addressed by 4D technology specifically geared to meet the needs of the construction industry. This paper proposed a new construction planning approach based on simulation by using a game engine. Design/methodology/approach A 4D automatic simulation tool was developed and a case study was carried out. The proposed tool was used to simulate and optimize the plans for the installation of a temporary platform for piling in a civil construction project in Hong Kong. The tool simulated the result of the construction process with three variables: 1) equipment, 2) site layout and 3) schedule. Through this, the construction team was able to repeatedly simulate a range of options. Findings The results indicate that the proposed approach can provide a user-friendly 4D simulation platform for the construction industry. The simulation can also identify the solution being sought by the construction team. The paper also identifies directions for further development of the 4D technology as an aid in construction planning and decision-making. Research limitations/implications The tests on the tool are limited to a single case study and further research is needed to test the use of game engines for construction planning in different construction projects to verify its effectiveness. Future research could also explore the use of alternative game engines and compare their performance and results. Originality/value The authors proposed the use of game engine to simulate the construction process based on resources, working space and construction schedule. The developed tool can be used by end-users without simulation experience.
Resumo:
Purpose Optical blur and ageing are known to affect driving performance but their effects on drivers' eye movements are poorly understood. This study examined the effects of optical blur and age on eye movement patterns and performance on the DriveSafe slide recognition test which is purported to predict fitness to drive. Methods Twenty young (27.1 ± 4.6 years) and 20 older (73.3 ± 5.7 years) visually normal drivers performed the DriveSafe under two visual conditions: best-corrected vision and with +2.00 DS blur. The DriveSafe is a Visual Recognition Slide Test that consists of brief presentations of static, real-world driving scenes containing different road users (pedestrians, bicycles and vehicles). Participants reported the types, relative positions and direction of travel of the road users in each image; the score was the number of correctly reported items (maximum score of 128). Eye movements were recorded while participants performed the DriveSafe test using a Tobii TX300 eye tracking system. Results There was a significant main effect of blur on DriveSafe scores (best-corrected: 114.9 vs blur: 93.2; p < 0.001). There was also a significant age and blur interaction on the DriveSafe scores (p < 0.001) such that the young drivers were more negatively affected by blur than the older drivers (reductions of 22% and 13% respectively; p < 0.001): with best-corrected vision, the young drivers performed better than the older drivers (DriveSafe scores: 118.4 vs 111.5; p = 0.001), while with blur, the young drivers performed worse than the older drivers (88.6 vs 95.9; p = 0.009). For the eye movement patterns, blur significantly reduced the number of fixations on road users (best-corrected: 5.1 vs blur: 4.5; p < 0.001), fixation duration on road users (2.0 s vs 1.8 s; p < 0.001) and saccade amplitudes (7.4° vs 6.7°; p < 0.001). A main effect of age on eye movements was also found where older drivers made smaller saccades than the young drivers (6.7° vs 7.4°; p < 0.001). Conclusions Blur reduced DriveSafe scores for both age groups and this effect was greater for the young drivers. The decrease in number of fixations and fixation duration on road users, as well as the reduction in saccade amplitudes under the blurred condition, highlight the difficulty experienced in performing the task in the presence of optical blur, which suggests that uncorrected refractive errors may have a detrimental impact on aspects of driving performance.