Bulk sediment parameters and coarse-fraction analysis of ODP Leg 178 holes

The area west of the Antarctic Peninsula is a key region for studying and understanding the history of glaciation in the southern high latitudes during the Neogene with respect to variations of the western Antarctic continental ice sheet, variable sea-ice cover, induced eustatic sea level change, as well as consequences for the global climatic system (Barker, Camerlenghi, Acton, et al., 1999). Sites 1095, 1096, and 1101 were drilled on sediment drifts forming the continental rise to examine the nature and composition of sediments deposited under the influence of the Antarctic Peninsula ice sheet, which has repeatedly advanced to the shelf edge and subsequently released glacially eroded material on the continental shelf and slope (Barker et al., 1999). Mass gravity processes on the slope are responsible for downslope sediment transport by turbidity currents within a channel system between the drifts. Furthermore, bottom currents redistribute the sediments, which leads to final build up of drift bodies (Rebesco et al., 1998). The high-resolution sedimentary sequences on the continental rise can be used to document the variability of continental glaciation and, therefore, allow us to assess the main factors that control the sediment transport and the depositional processes during glaciation periods and their relationship to glacio-eustatic sea level changes. Site 1095 lies in 3840 m of water in a distal position on the northwestern lower flank of Drift 7, whereas Site 1096 lies in 3152 m of water in a more proximal position within Drift 7. Site 1101 is located at 3509 m water depth on the northwestern flank of Drift 4. All three sites have high sedimentation rates. The oldest sediments were recovered at Site 1095 (late Miocene; 9.7 Ma), whereas sediments of Pliocene age were recovered at Site 1096 (4.7 Ma) and at Site 1101 (3.5 Ma). The purpose of this work is to provide a data set of bulk sediment parameters such as CaCO3, total organic carbon (TOC), and coarse-fraction mass percentage (>63 µm) measured on the sediments collected from the continental rise of the western Antarctic Peninsula (Holes 1095A, 1095B, 1096A, 1096B, 1096C, and 1101A). This information can be used to understand the complex depositional processes and their implication for variations in the climatic system of the western Pacific Antarctic margin since 9.7 Ma (late Miocene). Coarse-fraction particles (125-500 µm) from the late Pliocene and Pleistocene (4.0 Ma to recent) sediments recovered from Hole 1095A were microscopically analyzed to gather more detailed information about their variability and composition through time. These data can yield information about changes in potential source regions of the glacially eroded material that has been transported during repeated periods of ice-sheet movements on the shelf.

Distributed Extremum-Seeking Control with Applications to High-Altitude Balloons

The real-time optimization of large-scale systems is a difficult problem due to the need for complex models involving uncertain parameters and the high computational cost of solving such problems by a decentralized approach. Extremum-seeking control (ESC) is a model-free real-time optimization technique which can estimate unknown parameters and can optimize nonlinear time-varying systems using only a measurement of the cost function to be minimized. In this thesis, we develop a distributed version of extremum-seeking control which allows large-scale systems to be optimized without models and with minimal computing power. First, we develop a continuous-time distributed extremum-seeking controller. It has three main components: consensus, parameter estimation, and optimization. The consensus provides each local controller with an estimate of the cost to be minimized, allowing them to coordinate their actions. Using this cost estimate, parameters for a local input-output model are estimated, and the cost is minimized by following a gradient descent based on the estimate of the gradient. Next, a similar distributed extremum-seeking controller is developed in discrete-time. Finally, we consider an interesting application of distributed ESC: formation control of high-altitude balloons for high-speed wireless internet. These balloons must be steered into a favourable formation where they are spread out over the Earth and provide coverage to the entire planet. Distributed ESC is applied to this problem, and is shown to be effective for a system of 1200 ballons subjected to realistic wind currents. The approach does not require a wind model and uses a cost function based on a Voronoi partition of the sphere. Distributed ESC is able to steer balloons from a few initial launch sites into a formation which provides coverage to the entire Earth and can maintain a similar formation as the balloons move with the wind around the Earth.

Efficacy and Safety of Cannabidiol and Tetrahydrocannabivarin on Glycemic and Lipid Parameters in Patients With Type 2 Diabetes: A Randomized, Double-Blind, Placebo-Controlled, Parallel Group Pilot Study

OBJECTIVE Cannabidiol (CBD) and D9-tetrahydrocannabivarin (THCV) are nonpsychoactive phytocannabinoids affecting lipid and glucose metabolism in animal models. This study set out to examine the effects of these compounds in patients with type 2 diabetes. RESEARCH DESIGN AND METHODS In this randomized, double-blind, placebo-controlled study, 62 subjects with noninsulin-treated type 2 diabetes were randomized to five treatment arms: CBD (100 mg twice daily), THCV (5 mg twice daily), 1:1 ratio of CBD and THCV (5 mg/5 mg, twice daily), 20:1 ratio of CBD and THCV (100 mg/5 mg, twice daily), or matched placebo for 13 weeks. The primary end point was a change in HDL-cholesterol concentrations from baseline. Secondary/tertiary end points included changes in glycemic control, lipid profile, insulin sensitivity, body weight, liver triglyceride content, adipose tissue distribution, appetite, markers of inflammation, markers of vascular function, gut hormones, circulating endocannabinoids, and adipokine concentrations. Safety and tolerability end points were also evaluated. RESULTS Compared with placebo, THCV significantly decreased fasting plasma glucose (estimated treatment difference [ETD] = 21.2 mmol/L; P < 0.05) and improved pancreatic b-cell function (HOMA2 b-cell function [ETD = 244.51 points; P < 0.01]), adiponectin (ETD = 25.9 3 106 pg/mL; P < 0.01), and apolipoprotein A (ETD = 26.02 mmol/L; P < 0.05), although plasma HDL was unaffected. Compared with baseline (but not placebo), CBD decreased resistin (2898 pg/ml; P < 0.05) and increased glucose-dependent insulinotropic peptide (21.9 pg/ml; P < 0.05). None of the combination treatments had a significant impact on end points. CBD and THCV were well tolerated. CONCLUSIONS THCV could represent a newtherapeutic agent in glycemic control in subjects with type 2 diabetes.

Monitoring Infection Risk for Air and Soil Borne Fungal Plant Pathogens using Antibody and DNA Techniques and Mathematical Models describing Environmental Parameters

Economic losses resulting from disease development can be reduced by accurate and early detection of plant pathogens. Early detection can provide the grower with useful information on optimal crop rotation patterns, varietal selections, appropriate control measures, harvest date and post harvest handling. Classical methods for the isolation of pathogens are commonly used only after disease symptoms. This frequently results in a delay in application of control measures at potentially important periods in crop production. This paper describes the application of both antibody and DNA based systems to monitor infection risk of air and soil borne fungal pathogens and the use of this information with mathematical models describing risk of disease associated with environmental parameters.

Recommendations for in-situ data Near Real Time Quality Control

With the construction of operational oceanography systems, the need for real-time has become more and more important. A lot of work had been done in the past, within National Data Centres (NODC) and International Oceanographic Data and Information Exchange (IODE) to standardise delayed mode quality control procedures. Concerning such quality control procedures applicable in real-time (within hours to a maximum of a week from acquisition), which means automatically, some recommendations were set up for physical parameters but mainly within projects without consolidation with other initiatives. During the past ten years the EuroGOOS community has been working on such procedures within international programs such as Argo, OceanSites or GOSUD, or within EC projects such as Mersea, MFSTEP, FerryBox, ECOOP, and MyOcean. In collaboration with the FP7 SeaDataNet project that is standardizing the delayed mode quality control procedures in NODCs, and MyOcean GMES FP7 project that is standardizing near real time quality control procedures for operational oceanography purposes, the DATA-MEQ working group decided to put together this document to summarize the recommendations for near real-time QC procedures that they judged mature enough to be advertised and recommended to EuroGOOS.

Estimates of genetic parameters for growth and wood properties in Eucalyptus pellita F. Muell. to support tree breeding in Vietnam

Eucalyptus pellita demonstrated good growth and wood quality traits in this study, with young plantation grown timber being suitable for both solid and pulp wood products. All traits examined were under moderate levels of genetic control with little genotype by environment interaction when grown on two contrasting sites in Vietnam. Eucalyptus pellita currently has a significant role in reforestation in the tropics. Research to support expanded of use of this species is needed: particularly, research to better understand the genetic control of key traits will facilitate the development of genetically improved planting stock. This study aimed to provide estimates of the heritability of diameter at breast height over bark, wood basic density, Kraft pulp yield, modulus of elasticity and microfibril angle, and the genetic correlations among these traits, and understand the importance of genotype by environment interactions in Vietnam. Data for diameter and wood properties were collected from two 10-year-old, open-pollinated progeny trials of E. pellita in Vietnam that evaluated 104 families from six native range and three orchard sources. Wood properties were estimated from wood samples using near-infrared (NIR) spectroscopy. Data were analysed using mixed linear models to estimate genetic parameters (heritability, proportion of variance between seed sources and genetic correlations). Variation among the nine sources was small compared to additive variance. Narrow-sense heritability and genetic correlation estimates indicated that simultaneous improvements in most traits could be achieved from selection among and within families as the genetic correlations among traits were either favourable or close to zero. Type B genetic correlations approached one for all traits suggesting that genotype by environment interactions were of little importance. These results support a breeding strategy utilizing a single breeding population advanced by selecting the best individuals across all seed sources. Both growth and wood properties have been evaluated. Multi-trait selection for growth and wood property traits will lead to more productive populations of E. pellita both with improved productivity and improved timber and pulp properties.

Assessments of body composition and bone parameters of lactating rats treated with diet containing flaxseed meal (Linum usitatissinum) during post-weaning period

Introduction: There are few studies on body composition and the effects of diet on weight postpartum women. The aim was to evaluate the body composition and bone parameters in lactating rats treated with diet containing flaxseed flour during postweaning period. Methods: After weaning, the lactating rat were divided in control (n = 6) and experimental (F, n = 6) group, treated with 25% flaxseed flour diet. After 30 days, body composition by dual-energy X-ray absorptiometry, serum analysis, organs and intra-abdominal fat mass, femur and lumbar vertebra parameters were determined. Results: The groups showed similar food intake, body mass and bone parameters. While F group showed the following: lower body (-5%), gonadal (-17%), mesenteric (-23%) and intra-abdominal (-6%) fat mass. Increase of HDL-cholesterol (+10%) and lower glucose (-15%), triglycerides (P < 0.05, -37%) and cholesterol (P < 0.05, -21%). Conclusions: The findings highlight the effects of flaxseed for control of adiposity and to maintain a healthy biochemical profile during the postnatal period.

Quantification of the human postural control system to perturbations

Human standing posture is inherently unstable. The postural control system (PCS), which maintains standing posture, is composed of the sensory, musculoskeletal, and central nervous systems. Together these systems integrate sensory afferents and generate appropriate motor efferents to adjust posture. The PCS maintains the body center of mass (COM) with respect to the base of support while constantly resisting destabilizing forces from internal and external perturbations. To assess the human PCS, postural sway during quiet standing or in response to external perturbation have frequently been examined descriptively. Minimal work has been done to understand and quantify the robustness of the PCS to perturbations. Further, there have been some previous attempts to assess the dynamical systems aspects of the PCS or time evolutionary properties of postural sway. However those techniques can only provide summary information about the PCS characteristics; they cannot provide specific information about or recreate the actual sway behavior. This dissertation consists of two parts: part I, the development of two novel methods to assess the human PCS and, part II, the application of these methods. In study 1, a systematic method for analyzing the human PCS during perturbed stance was developed. A mild impulsive perturbation that subjects can easily experience in their daily lives was used. A measure of robustness of the PCS, 1/MaxSens that was based on the inverse of the sensitivity of the system, was introduced. 1/MaxSens successfully quantified the reduced robustness to external perturbations due to age-related degradation of the PCS. In study 2, a stochastic model was used to better understand the human PCS in terms of dynamical systems aspect. This methodology also has the advantage over previous methods in that the sway behavior is captured in a model that can be used to recreate the random oscillatory properties of the PCS. The invariant density which describes the long-term stationary behavior of the center of pressure (COP) was computed from a Markov chain model that was applied to postural sway data during quiet stance. In order to validate the Invariant Density Analysis (IDA), we applied the technique to COP data from different age groups. We found that older adults swayed farther from the centroid and in more stochastic and random manner than young adults. In part II, the tools developed in part I were applied to both occupational and clinical situations. In study 3, 1/MaxSens and IDA were applied to a population of firefighters to investigate the effects of air bottle configuration (weight and size) and vision on the postural stability of firefighters. We found that both air bottle weight and loss of vision, but not size of air bottle, significantly decreased balance performance and increased fall risk. In study 4, IDA was applied to data collected on 444 community-dwelling elderly adults from the MOBILIZE Boston Study. Four out of five IDA parameters were able to successfully differentiate recurrent fallers from non-fallers, while only five out of 30 more common descriptive and stochastic COP measures could distinguish the two groups. Fall history and the IDA parameter of entropy were found to be significant risk factors for falls. This research proposed a new measure for the PCS robustness (1/MaxSens) and a new technique for quantifying the dynamical systems aspect of the PCS (IDA). These new PCS analysis techniques provide easy and effective ways to assess the PCS in occupational and clinical environments.

Effects of organic fertilizers on the vegetative, nutritional, and productive parameters of blueberries ‘Corona’, ‘Legacy’, and ‘Liberty’

Organic farming does not allow using certain inputs, such as N, which differ in nutrient release rates and dynamics. To evaluate the effect of different organic fertilizers on the vegetative, nutritional, and productive parameters of blueberries ( Vaccinium corymbosum L.), a pot experiment was conducted in three consecutive seasons in a sandy soil of south-central Chile using ‘Corona’, ‘Legacy’ and ‘Liberty’. The following fertilizers were evaluated: compost (CM), Purely Grow (PG), Purely Lysine (PL), Fertil (F), blood meal (BM), lupine meal (LM), along with a control treatment without fertilization (C) and two conventional treatments with urea (CF) and sodium nitrate (S). Results indicate that vegetative growth and leaf N concentration prior to senescence were different among cultivars in the three evaluated seasons. The highest leaf N concentration was recorded in ‘Corona’ followed by ‘Legacy’ and ‘Liberty’ while levels tended to increase in the seasons. Quick-release N sources had greater effects on these parameters but with differences among cultivars. Fruit yield and weight were higher in ‘Corona’ followed by ‘Legacy’ and ‘Liberty’. Fruit yield was generally higher when using LM and F and showed no effect on fruit weight. Leaf chlorophyll content was higher in ‘Corona’ followed by ‘Legacy’ and ‘Liberty’, which increased when using CF, LM, BM, and PG. Finally, the organic fertilizer and blueberry cultivar that obtained the highest values for most of the evaluated parameters were LM and Corona, respectively.

Effects of electron-beam irradiation on chemical and antioxidation parameters of wild Macrolepiota procera dried samples

Mushrooms are very perishable foods due to their high susceptibility to moisture loss, changes in color and texture, or microbiological spoilage. Drying is considered as the most appropriate method to prevent these alterations, but it has some limitations, such as shrinkage, enzymatic and non-enzymatic browning reactions, and oxidation of lipids and vitamins. Irradiation might effectively attenuate the undesirable changes caused by drying process, ensuring also higher shelf-life of mushrooms and their decontamination [I]. In the present work, the combined effects of electron-beam irradiation (at 0, 0.5, 1 and 6 kGy doses) and storage time (at 0, 6 and 12 months) were evaluated and compared. Macrolepiota procera (Scop.) Singer wild samples were obtained in Tnis-os-Montes, in the Northeast of Portugal, and dried at 30 •c in an oven. Subsequently, the samples were divided in four groups: control (non-irradiated, 0 kGy); sample 1 (0.5 kGy); sample 2 (1 kGy) and sample 3 (6 kGy). The irradiation was performed at the lNCTInstitute of Nuclear Chemistry and Technology (lNCT), in Warsaw, Poland. Moisture, protein, fat, carbohydrates and ash were determined following standard procedures. Free sugars and tocopherols were determined by high performance liquid chromatography coupled to a refraction index detector (HPLC-RI) and a fluorescence detector, respectively; fatty acids were determined by gas-liquid chromatography with flame ionization detection (GC-FID). Antioxidant activity was evaluated in the methanolic extracts by in vitro assays measuring DPPH (1,1-diphenyl-2- picrylhydrazyl) radical scavenging activity, reducing power, inhibition of ~-carotene bleaching and inhibition oflipid peroxidation using thiobarbituric acid reactive substances (TBARS) assay. Total phenolics were also determined by the Folin-Ciocalteu assay. All the parameters showed a decrease tendency with storage time. Trehalose and y-tocopherol were preserved with 1 kGy dose. Electron-beam irradiation did not impart additional changes to most of the chemical and antioxidant parameters of M. procera dried samples. This is a very promising result, since electron-beam irradiation might attenuate most unwanted changes caused by drying, maintaining its long-term effectiveness.

Modular continuous crystallizer: operation, experimental arrangement and identification of process parameters

Crystallization is employed in different industrial processes. The method and operation can differ depending on the nature of the substances involved. The aim of this study is to examine the effect of various operating conditions on the crystal properties in a chemical engineering design window with a focus on ultrasound assisted cooling crystallization. Batch to batch variations, minimal manufacturing steps and faster production times are factors which continuous crystallization seeks to resolve. Continuous processes scale-up is considered straightforward compared to batch processes owing to increase of processing time in the specific reactor. In cooling crystallization process, ultrasound can be used to control the crystal properties. Different model compounds were used to define the suitable process parameters for the modular crystallizer using equal operating conditions in each module. A final temperature of 20oC was employed in all experiments while the operating conditions differed. The studied process parameters and configuration of the crystallizer were manipulated to achieve a continuous operation without crystal clogging along the crystallization path. The results from the continuous experiment were compared with the batch crystallization results and analysed using the Malvern Morphologi G3 instrument to determine the crystal morphology and CSD. The modular crystallizer was operated successfully with three different residence times. At optimal process conditions, a longer residence time gives smaller crystals and narrower CSD. Based on the findings, at a constant initial solution concentration, the residence time had clear influence on crystal properties. The equal supersaturation criterion in each module offered better results compared to other cooling profiles. The combination of continuous crystallization and ultrasound has large potential to overcome clogging, obtain reproducible and narrow CSD, specific crystal morphologies and uniform particle sizes, and exclusion of milling stages in comparison to batch processes.

Influence of magnesium on biochemical parameters of iron and oxidative stress in patients with type 2 diabetes

Introduction: Studies have shown that oxidative stress, found in patients with type 2 diabetes, may be due to changes in the metabolism of minerals, such as magnesium and iron. Data related to compartmentalization of these minerals in diabetes are scarce and controversial. Objective: This study assessed the influence of magnesium on biochemical parameters of iron and oxidative stress in patients with type 2 diabetes. Methods: A case-control study in male and female subjects aged 27-59 years, divided into two groups: type 2 diabetes (n=40) and control (n=48). Intake of magnesium and iron was assessed by three-day food record. Plasma, erythrocyte and urinary levels of magnesium, serum iron, ferritin, total iron binding capacity, fasting glucose, glycated hemoglobin, insulin, creatinine clearance and plasma thiobarbituric acid reactive substances (TBARS) were analyzed. Results and Discussion: Magnesium intake and plasma magnesium were lower in diabetic subjects. There was low urinary magnesium excretion, with no difference between groups. Although normal, the diabetic group had lower serum iron and ferritin concentrations compared to control subjects. Plasma TBARS in diabetic patients was higher than control while creatinine clearance was lower. An inverse correlation between erythrocyte magnesium and serum iron and ferritin was observed in the diabetes group. Conclusions: Diabetes induced hypomagnesemia and this, associated with chronic hyperglycemia, may have enhanced oxidative stress. Erythrocyte magnesium may have contributed to prevent iron overload and worsening of oxidative stress and hyperglycemic status.

Semen profiles of young men involved as bicycle taxi cyclists in Mangochi District, Malawi: A case-control study

Aim The purpose of this study was to evaluate the semen profiles of bicycle taxi cyclists and healthy controls in Mangochi district, Malawi. Methods Semen samples were collected from young bicycle taxi cyclists after two to three days of sexual abstinence. A control group, comprising young men who were not bicycle taxi operators also submitted semen samples. Samples were left to liquefy for 30 minutes before measurements were conducted of volume, concentration, total motility, and progressive motility. This was followed by preparation of morphology slides. Light microscopy was used for sperm analysis. Results Semen parameters such as volume (1.66 ± 0.18 mL vs. 3.64 ± 0.17 mL; p = 0.0001), concentration (28.31 ± 4.33 x 106/mL vs. 54.95 ± 5.93 x 106/ mL; p = 0.02) , total motility (56.98% ± 8.22% vs. 56.98% ± 8.22%; p = 0.03), progressive motility (22.57% ± 3.35% vs. 59.69% ± 4.82%; p = 0.004), and morphology (6.98% ± 3.23% vs. 19.73% ± 2.32%; p = 0.006) were significantly reduced in the bicycle taxi cyclists compared to the healthy controls. Conclusion In this case-control study, bicycle taxi operators had lower semen volume, concentration, total motility, and progressive motility, as well as a higher concentration of abnormally shaped spermatocytes, compared to healthy controls.

Copernicus In Situ TAC, Real Time Quality Control for WAVES

In April 2017, CMEMS plans to launch the WAVES NRT products. This document is focused in the automatic RTQC of the collected wave data. The validation procedure includes the delayed mode quality control of the data and will be specified in another guideline. To perform any kind of quality control to wave data, first it’s necessary to know the nature of the measurements and the analysis performed to those measurements to obtain the wave parameters. For that reason next chapter is dedicated to show the usual wave analysis and the different parameters and estimators obtained.

Diseño de un sistema de control de costos para el proceso de construcción de vivienda popular

El objetivo,para el desarrollo de este proyecto de graduación, es establecer un control de costos en las viviendas de interés social que se desarrollan en el Ecuador, a nivel de proyectos, ejecutados por empresas constructoras o contratistas. Se tomarán datos de la ejecución en campo de viviendas de 42 m2 de construcción, en la comunidad de Macas provincia del Cañar. Se verificarán materiales reales, rendimiento de mano de obra reales y rendimientos de equipo y transporte reales, con el afán de determinar el costo real de la obra. Todos estos datos se registrarán en el modelo desarrollado con lo que se comparará lo ejecutado contra lo programado. En el caso de existir un desfase entre estos dos parámetros, el modelo proyectará un nuevo presupuesto, asegurándose de que los gastos no excedan el financiamiento autorizado para el proyecto. El modelo almacenará datos de rendimientos de mano de obra, precios de materiales, equipos y transporte. Esto permitirá plantear presupuestos para futuros proyectos con precios cada vez más cercanos a los reales en la ejecución del proyecto, ayudando, de manera permanente, a instituciones gubernamentales profesionales de la construcción dedicadas a la proyección de viviendas.