The processing of fish and other marine resources

The preservation of freshness in fish (commonly referred to as fish handling) and the conversion of fresh fish into other products can both be considered as methods of processing. In commercial practice, however, the term "processing" is confined to the conversion of fresh fish into other products.

Mode control in vertical-cavity surface-emitting lasers by post-processing using focused ion-beaih etching

Single-mode emission is achieved in previously multimode gain-guided vertical-cavity surface-emitting lasers (VCSEL's) by localized modification of the mirror reflectivity using focused ion-beam etching. Reflectivity engineering is also demonstrated to suppress transverse mode emission in an oxide-confined device, reducing the spectral width from 1.2 nm to less than 0.5 nm.

The establishment of a commercial fishery for Haplochromis in the Uganda waters of Lake Victoria

Lake Victoria, straddling the Equator, is the second largest lake in the world, with a surface area of approximately 26,000 square miles (41,500 square kilometers) and a maximum depth of about 300 feet. Uganda possesses most of the north end of the lake which consists of a long, indented coastline and a chain of offshore islands on the edge of a 'continental shelf' separating relatively shallow sheltered inshore waters from the deeper open waters of the lake. At the present time the lake is harvested mainly by a native gill net fishery confined almost entirely to the shallow sheltered inshore waters. The annual production of all species from Uganda waters is in the region of 24,000 tons per annum, and Tilapia(Cichlidae)is commercially the most important genus. Haplochromis, a close relative of Tilapia, but generally much smaller, contributes only a small amount to this annual production; see Table 1, although they are probably the most abundant group of fish present in the lake. Through international aid programmes Uganda has been offered a canning plant and it is thought that Haplochromis is the most suitable type of fish to be utilized by such a plant. The Uganda Fisheries Department are conducting research into processing techniques and marketing and the East African Freshwater Fisheries Research Organization was asked to conduct a survey of the Haplochromis stocks of the lake with a view to estimating the ability or otherwise of these stocks to support a commercial canning industry.

Performance of 10 Gbit/s VCSELs operating at 85°C

Oxide-confined VCSELs that are able to operate at modulation speeds of 10 Gbit/s at operating temperatures up to 85°C are demonstrated. This level of performance makes these VCSELs attractive sources for commercial applications in the computer interconnect industry.

Shock / boundary-layer interaction control using three-dimensional bumps for transonic wings

Three-dimensional bumps have been developed and investigated, aiming at the two major objectives of shock-wave / boundary-layer interaction control, i.e. drag reduction and suppression of separation, simultaneously. An experimental investigation has been conducted for a default rounded bump in channel now at University of Cambridge and a computational study has been performed for a spanwise series of rounded bumps mounted on a transonic aerofoil at University of Stuttgart. Observed in both cases are wave drag reduction owing to A-shock structures produced by three-dimensional surface bumps and mild control effects on the boundary layer. The effects of rough surface and tall extension have been investigated as well as several geometric variations and multiple bump configurations. A double configuration of narrow rounded bumps has been found to best perform amongst the tested, considerably reducing wave drag through a well-established A-shock structure with little viscous penalty and thus achieving substantial overall drag reduction. Counter-rotating streamwise vortex pairs have been produced by some configurations as a result of local flow separation, but they have been observed to be confined in relatively narrow wake regions, expected to be beneficial in suppressing large-scale separation under off-design condition despite increase of viscous drag. On the whole a large potential of three-dimensional control with discrete rounded bumps has been demonstrated both experimentally and numerically, and experimental investigation of bumps fitted on a transonic aerofoil or wing is suggested toward practical application.

Impact of dead and sunken water hyacinth on biotic communities, the aquatic environment and socio-economic activities

The mobile water hyacinth, which was produced in growth zones, especially Murchison Bay, was mainly exported to three sheltered storage bays (Thruston, Hannington and Waiya). Between 1996 and May 1998, the mobile form of water hyacinth occupied about 800 ha in Thruston Bay, 750 ha in Hannington Bay and 140 ha in Waiya Bay). Biological control weevils and other factors, including localised nutrient depletion, weakened the weed that was confined to the bays and it sunk around October 1998. The settling to the bottom of such huge quantities of organic matter its subsequent decomposition and the debris from this mass was likely to have environmental impacts on biotic communities (e.g. fish and invertebrate), physico-chemical conditions (water quality), and on socio-economic activities (e.g. at fish landings, water abstraction, and hydro-power generation points). Sunken water. hyacinth debris could also affect nutrient levels in the water column and lead to reduction in the content of dissolved oxygen. The changes in nutrient dynamics and oxygen levels could affect algal productivity, invertebrate composition and fish communities. Socio-economic impacts of dead sunken weed were expected from debris deposited along the shoreline especially at fish landings, water abstraction and hydropower generation points. Therefore, environmental impact assessment studies were carried out between 1998 and 2002 in selected representative zones of Lake Victoria to identify the effects of the sunken water hyacinth biomass

High-density comparative BAC mapping in the black muntjac (Muntiacus crinifrons): Molecular cytogenetic dissection of the origin of MCR 1p+4 in the X1X2Y1Y2Y3 sex chromosome system

The black muntjac (Muntiacus crinifrons, 2n = 8 female/9 male) is a critically endangered mammalian species that is confined to a narrow region of southeastern China. Male black muntjacs have an astonishing X1X2Y1Y2Y3 sex chromosome system, unparalleled i

Durability study of eleven years old cement-bentonite cut-off wall material

Comprehensive understanding of the long-term performance of cement-bentonite slurry trench cut-off walls is essential as these mixes may degrade when exposed to aggressive environments or when subjected to prolonged drying. A series of wetting-drying and immersion experiments was carried out to evaluate the durability characteristics of laboratory mixed samples and block field samples from 40 days to 11 years of age. For the wetting-drying tests, the samples buried in medium graded sand were subjected to periodical flooding and drying cycles. They were then used for permeability testing and unconfined compressive strength (UCS) testing. For the immersion tests, the samples confined in perforated molds were submerged in magnesium sulfate solution for 16 weeks and their microstructures were then analyzed using X-ray diffraction (XRD) technique. This paper identifies the effects of contaminant exposure on durability of cement-bentonite and the effects of aging by comparing 11 years old samples to younger samples. Test results showed that young or previously contaminated cement-bentonite mixes are more susceptible to sulfate attack than old or less contaminated mixes. Copyright ASCE 2008.

Modelling of long-term ground response to tunnelling under St James's Park, London

Following a tunnel excavation in low-permeability soil, it is commonly observed that the ground surface continues to settle and ground loading on the tunnel lining changes, as the pore pressures in the ground approach a new equilibrium condition. The monitored ground response following the tunnelling under St James's Park, London, shows that the mechanism of subsurface deformation is composed of three different zones: swelling, consolidation and rigid body movement. The swelling took place in a confined zone above the tunnel crown, extending vertically to approximately 5 m above it. On the sides of the tunnel, the consolidation of the soil occurred in the zone primarily within the tunnel horizon, from the shoulder to just beneath the invert, and extending laterally to a large offset from the tunnel centreline. Above these swelling and consolidation zones the soil moved downward as a rigid body. In this study, soil-fluid coupled three-dimensional finite element analyses were performed to simulate the mechanism of long-term ground response monitored at St James's Park. An advanced critical state soil model, which can simulate the behaviour of London Clay in both drained and undrained conditions, was adopted for the analyses. The analysis results are discussed and compared with the field monitoring data. It is found that the observed mechanism of long-term subsurface ground and tunnel lining response at St James's Park can be simulated accurately only when stiffness anisotropy, the variation of permeability between different units within the London Clay and non-uniform drainage conditions for the tunnel lining are considered. This has important implications for future prediction of the long-term behaviour of tunnels in clays.

Distribution, biology and behaviour of the giant trevally, Caranx ignobilis- a candidate species for mariculture

Fishery and biology of the giant trevally, Caranx ignobilis exploited along the Tuticorin coast of Tamilnadu were monitored during 2001-2006. Fishery occurred round the year with peak landings during April-August. Spawning and recruitment occur almost round the year with peak during November-December. Young ones are abundant in shallow coastal waters and as grows, they move to deeper waters. Growth parameters, L"' and K are estimated respectively as 143.6 cm and 0.69/year and 'to' as -0.0242 year. Estimates show that they grow fast and attain 73, 108, 126 and 134 cm in total length by first, second, third and fourth year respectively. Their weight increment is also fast and attains 5.5 kg, 16.8 kg, 25.9 kg and 33.7 kg respectively during the period. Stock assessment indicated that the stock at present is over exploited and under heavy fishing pressure. Rearing trial in aquarium tank showed that they are compatible to confined rearing conditions. Based on the distribution and biology of the species, their mariculture potential is discussed.

Degradation of tropical forest in Hainan, China, 1991-2008: Conservation implications for Hainan Gibbon (Nomascus hainanus)

The Hainan gibbon (Nomascus hainanus) is one of the most endangered primates in the world, confined to mature natural forest in Hainan Island, China. We assessed changes in habitat condition on the island between 1991 and 2008, using vegetation maps generated by remote-sensing images. We defined forest suitable for gibbons based on composition, tree size and canopy cover. During the 17-year period, the area of suitable gibbon forest decreased by 540 km(2) (35%) across the whole island, and by 6.3 km(2) (7%) in the locality of the sole remaining gibbon population at Bawangling National Nature Reserve. The forest patches large enough (>1 km(2)) to support a gibbon group decreased from 754 km(2) to 316 km(2) in total area, and from 92 to 64 in number. Suitable natural forest was mainly replaced by plantations below 760 m, or degraded by logging, grazing and planting of pines above 760 m. Meanwhile, forests in former confirmed gibbon areas became more fragmented: mean area of patches decreased by 53%. We mapped the patches of natural forest in good condition which could potentially support gibbons. We recommend a freeze on further expansion of plantations between core patches at Bawangling, Jiaxi-Houmiling and Yinggeling Nature Reserves in accordance with forest protection regulations; establishment of nature reserves in currently unprotected natural forest patches elsewhere in line with the local government's nature reserve expansion policy; and active natural-forest restoration between remaining fragments at Bawangling. (C) 2010 Elsevier Ltd. All rights reserved.

Shifting rice farming to fish culture in some selected areas of Mymensingh, Bangladesh: the process, conflicts and impacts

The evolutionary process of converting low-lying paddy fields into fish farms and its impact on agrarian communities in some selected areas of Mymensingh district were studied. This study was conducted through participatory rural appraisal (PRA) covering 12 villages from each of selected upazillas viz. Fulpur and Haluaghat of Mymensing [sic] district. A total of 12 PRA sessions were conducted where 90 farmers participated during 29 July to 26 August 2004. It is seen that the use of low-lying paddy fields was mostly confined to Broadcast Aman (B. Aman) rice production until 1960s. With the introduction of modern rice farming technology, the farmers started to produce Boro rice in Rabi season and B. Aman rice in Kharif season. With the passage of time, aquaculture technologies have been evolved and the farmers realized that fish farming is more profitable than rice cultivation, and then they started to utilize their paddy fields for alternate rice-fish farming and rice-cum-fish farming. Now a days, aquaculture based crop production system is in practice in more than 25% of the low-lying paddy fields. Conversion of rice fields in to fish ponds has brought up a change in the livelihood patterns of the rural farmers. The areas where the farmers involved themselves in the new production systems were fingerling collection, transportation and marketing of fry and fingerlings. During 1960s to 1970s, a few people used to culture fish in the permanent ponds for their own consumption, the species produced were rohu, catla, mrigal, ghainna, long whiskered catfish, freshwater shark (boal), snake head (shol) etc. Small fishes like climbing perch, stinging catfish, walking catfish, barb, minnows etc. were available in the rice fields during monsoon season. In 1980s to mid 1990s, some rice fields were converted into fish ponds and the people started to produce fish for commercial purposes. When rice-fish farming became profitable, a large number of people started converting their rice fields in to rice-fish culture ponds. Culture of some exotic fishes like silver carp, tilapia, grass carp, silver barb etc. also started in the paddy fields. Higher income from fish farming contributed positively in improving the housing, sanitation and education system in the study areas. It is seen that the medium and medium high lands were only used for alternate rice fish farming. The net income was high in any fish based cropping system that motivated the farmers to introduce fish based cropping system in the low-lying inland areas. As a result, the regional as well as communal income disparities occurred. However, the extraction of ground water became common during the dry period as the water was used for both rice and fish farming. Mass conversion of paddy fields into rice-fish culture ponds caused water logging in the study areas. In most cases, the participated farmers mentioned that they could be easily benefited by producing fish with T. Aman or only fish during the monsoon season. They agreed that this was an impressive technology to them and they could generate employment opportunities throughout the year. Finally, the social, economic and technical problems which are acting as constraints to rapid expansion of fish production system were reported from the interviewee.

Study on the quality of beche-de-mer in trade and shrinkage of specimens during processing

The beche-de-mer industry in India is a cent percent export oriented industry being confined to south east coast in Palk Bay and Gulf of Mannar in Tamil Nadu. Chemical quality of 180 trade samples of beche-de-mer of four sizes collected from the beche-de-mer curing centres of Ramanathapuram district was studied. Moisture ranged from 6.2 to 24.4% and sand content from 0.11 to 20.42% for all grades. Mean values of sand content are for grade 1=3.47%, grade 2=4.50%, grade 3=3.68%, grade 4=6.87%. Sodium chloride was almost constant for all grades at 5.7%. TVBN values ranged from 10 to 78.4 mg%. 44 laboratory samples of different grades were prepared following trade practice and examined for chemical quality. Mean moisture values are for grade 1=13.4%, grade 2=12.44%, grade 3=12.62%, grade 4=12.08% and mean values of sand are for grade 1=0.70%, grade 2=0.90%, grade 3=1.16%, grade 4=2.15%. The percentage of shrinkage of the animals ranged from 56% to 60% for dried beche-de-mer of 7.5 cm size and above.

Tolerance of Penaeus monodon larvae to cupric sulfate added in bath

Copper is used to deter the growth of bacterial, fungal and protozoan disease organism in fishes. Zoeae (Z SUB-1 ), myses (M SUB-1 ) and postlarvae (P SUB-1 ) were exposed to copper sulfate at concentrations of 0 . 025, 0 . 05, 0 . 75, 0 . 1 and 0 . 2 ppm from 24 to 96 hours. The number of surviving larvae were counted at the end of each 24-hour period and the percentage of survival is determined for each dose level. The LC SUB-50 for each of the larval stages was interpolated from the data whenever possible. Three trials with 2 replicates per trial were conducted. The physico-chemical characteristics of the bath taken before and at the end of the experimental period show insignificant differences between initial and final values in each trial. Results indicate that mortality rates of all larval stages increased with exposure time and that mortality rates of the experimental group is higher than the control. Interpolation of the LC SUB-50 is possible only for the 48-h and 72-h exposure times for both zoeae and myses and for the 48-h exposure time for the postlarvae. This is due to the high survival percentage of the 24-h group and the low survival percentage (below 50%) of the larvae exposed for 96 hours. The 48-hour LC SUB-50 for Z SUB-1 , M SUB-1 and P SUB-1 are 0 . 225, 0 . 350 and 0 . 125 ppm respectively. Postlarvae seem to be more sensitive than either of the 2 larval stages having a lower 48-h LC SUB-50 and a low survival rate after 72 hours. The larvae were observed to lose their balance and were lethargic, producing few swimming movements so that they were mostly confined to the bottom of the aquaria. Moribund larvae observed under the microscope had a faster but weak heartbeat compared to healthy larvae. Slight or complete loss of feeding ability indicated by empty guts and delayed molting of Z SUB-1 to Z SUB-2 were also noted.

Corner effect and asymmetry in transonic channel flows

An experimental and numerical investigation into transonic shock/boundary-layer interactions in rectangular ducts has been performed. Experiments have shown that flow development in the corners of transonic shock/boundary-layer interactions in confined channels can have a significant impact on the entire flowfield. As shock strength is increased from M∞ = 1:3 to 1.5, the flowfield becomes very slightly asymmetrical. The interaction of corner flows with one another is thought to be a potential cause of this asymmetry. Thus, factors that govern the size of corner interactions (such as interaction strength) and their proximity to one another (such as tunnel aspect ratio) can affect flow symmetry. The results of the computational study show reasonable agreement with experiments, although simulations with particular turbulence models predict highly asymmetrical solutions for flows that were predominantly symmetrical in experiments. These discrepancies are attributed to the tendency of numerical schemes to overprediction corner-interaction size, and this also accounts for why computational fluid dynamics predicts the onset of asymmetry at lower shock strengths than in experiments. The findings of this study highlight the importance of making informed decisions about imposing artificial constraints on symmetry and boundary conditions for internal transonic flows. Future effort into modeling corner flows accurately is required. Copyright © 2011 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.