Testing of Access Network's Internet Protocol Television Features

Testaus on tänä päivänä olennainen osa tuotekehitysprosessia koko tuotteen elinkaaren ajan, myös tietoliikennetekniikassa. Tietoverkoille asetetut tiukat vaatimukset ympärivuorokautisen toimivuuden suhteen nostavatmyös niiden testauksen tason ja laadun merkitystä. Erityisesti verkkojen uudet toiminnallisuudet, joilla ei ole vielä vuosia kestäneen käytön ja kehityksen tuomaa varmuus- ja laatutasoa, tuovat haasteita testauksen toteutukselle. Televisiokuvan välityksen Internetin yli mahdollistavat ominaisuudet ovat esimerkki tällaisista toiminnallisuuksista. Tässä diplomityössä käsitellään Tellabs Oy:n tuotekehitysosastolla vuosina 2005 ja 2006 toteutetun, erään operaattorin laajakaistaliityntäverkon päivitysprojektin testausosuutta. Kattavamman tarkastelun kohteena ovat erityisesti verkkoon lisättyjen laajakaistatelevisio- eli IPTV-toiminnallisuuksien integraatio- ja systeemitestausmenetelmät.

Pulmonary embolism severity index and troponin testing for the selection of low-risk patients with acute symptomatic pulmonary embolism.

Summary Background: The combination of the Pulmonary Embolism Severity Index (PESI) and troponin testing could help physicians identify appropriate patients with acute pulmonary embolism (PE) for early hospital discharge. Methods: This prospective cohort study included a total of 567 patients from a single center registry with objectively confirmed acute symptomatic PE. On the basis of the PESI, each patient was classified into 1 of 5 classes (I to V). At the time of hospital admission, patients had troponin I (cTnI) levels measured. The endpoint of the study was all-cause mortality within 30 days after diagnosis. We calculated the mortality rates in 4 patient groups: group 1: PESI class I-II plus cTnI <0.1 ng mL(-1); group 2: PESI classes III-V plus cTnI <0.1 ng mL(-1); group 3: PESI classes I-II plus cTnI >/= 0.1 ng mL(-1); and group 4: PESI classes III-V plus cTnI >/= 0.1 ng mL(-1). Results: The study cohort had a 30-day mortality of 10% (95% confidence interval [CI], 7.6 to 12.5%). Mortality rates in the 4 groups were 1.3%, 14.2%, 0% and 15.4%, respectively. Compared to non-elevated cTnl, the low-risk PESI had a higher negative predictive value (NPV) (98.9% vs 90.8%) and negative likelihood ratio (NLR) (0.1 vs 0.9) for predicting mortality. The addition of non-elevated cTnI to low-risk PESI did not improve the NPV or the NLR compared to either test alone. Conclusions: Compared to cTnl testing, PESI classification more accurately identified patients with PE who are at low risk of all-cause death within 30-days of presentation.

Automated detection of patient-ventilator asynchrony: new tool or new toy?

Although severe patient-ventilator asynchrony is frequent during invasive and non-invasive mechanical ventilation, diagnosing such asynchronies usually requires the presence at the bedside of an experienced clinician to assess the tracings displayed on the ventilator screen, thus explaining why evaluating patient-ventilator interaction remains a challenge in daily clinical practice. In the previous issue of Critical Care, Sinderby and colleagues present a new automated method to detect, quantify, and display patient-ventilator interaction. In this validation study, the automatic method is as efficient as experts in mechanical ventilation. This promising system could help clinicians extend their knowledge about patient-ventilator interaction and further improve assisted mechanical ventilation.

Development of a Testing Method for Convertibility of Paperboard

Työssä tutkittiin muovattujen kartonkivuokien sekä muovattujen kartonkinäytteiden rinnastettavuutta. Puristusvaiheen prosessiolosuhteiden miellettiin vaikuttavan eniten multidimensionaliseen muodonmuutokseen. Multidimensionaalista muodonmuutosta simuloitiin uudella muovaamiseen soveltuvalla muovauslaitteella. Kirjallisuusosassa keskeisiä teemoja ovat kartongin muovaus sekä kuitupohjaisen materiaalin reologinen käyttäytyminen. Kirjallisuusosassa esitellään lisäksi yksi tekninen sovellus, jonka avulla kyetään ennustamaan kuitumateriaalin muovautuvuutta sekä mittaamaan tapahtunutta muodonmuutosta. Prosessiparametrien teoreettista vaikutustakuituihin tarkastellaan myös kirjallisuusosassa. Kokeellisessa osassa toteutettiin kartonkivuokien valmistus puristamalla. Vastaavilla prosessiparametreilla muovattiin myös pienemmät testinäytteet. Perinteiset yksidimensionaliset deformaatiomittaukset toteutettiin lujuusominaisuuksien laboratoriomäärityksinä. Myös kitka, joka toimii tärkeänä muuttujana prässäysprosessissa, mitattiin laboratorio-olosuhteissa. Tämän työn tulokset osoittavat uuden kehitetyn muovausmenetelmän toimivuuden. Asema-voima kuvaajat ovat selkeitä sekä helposti luettavia. Tuloksissa havaittiin materiaalin muovauspotentiaalin sekä asema-voima kuvaajan välillä vallitseva yhteys. Erittäin merkittävä huomio oli myös, että muovipäällystetyllä kartongilla oli yhteys päällystämättömän kartongin asema-voima kuvaajaan. Tämä tulos osoittaa, että muovipäällystetyn kartongin muovautuvuutta voi olla mahdollista ennustaa pohjakartongin muovautuvuustulosten perusteella. Perinteiset yksidimensionaliset laboratoriomittaukset eivät kykene antamaan riittävää informaatiota muovautuvuuden ennustamiseen. Tästä näkökulmasta on tärkeää että kartongin multidimensionalista muotoutuvuutta voidaankin tutkia kehitetyllä muovausmenetelmällä.

Assessing Patient's belief on HIV testing before elective surgery: place for improvements in Switzerland

Background and aim of the study: In Switzerland no HIV test is performed without the patient's consent based on a Voluntary Counseling and Testing policy (VCT). We hypothesized that a substantial proportion of patients going through an elective surgery falsely believed that an HIV test was performed on a routine basis and that the lack of transmission of result was interpreted as being HIV negative. Material and method: All patients with elective orthopedic surgery during 2007 were contacted by phone in 2008. A structured questionnaire assessed their belief about routine preoperative blood analysis (glycemia, coagulation capacity, HIV serology and cholesterol) as well as result awareness and interpretation. Variables included age and gender. Analysis were conducted using the software JMP 6.0.3. Results: 1123 patients were included. 130 (12%) were excluded (i.e. unreachable, unable to communicate on the phone, not operated). 993 completed the survey (89%). Median age was 51 (16-79). 50% were female. 376 (38%) patients thought they had an HIV test performed before surgery but none of them had one. 298 (79%) interpreted the absence of result as a negative HIV test. A predictive factor to believe an HIV test had been done was an age below 50 years old (45% vs 33% for 16-49 years old and 50-79 years old respectively, p <0.001). No difference was observed between genders. Conclusion: In Switzerland, nearly 40% of the patients falsely thought an HIV test had been performed on a routine basis before surgery and were erroneously reassured about their HIV status. These results should either improve the information given to the patient regarding preoperative exams, or motivate public health policy to consider HIV opt-out screening, as patients are already expecting it.

Testing Weak-Form Efficiency of the Chinese Stock Market

Tämän tutkielman tavoitteena on tarkastella Kiinan osakemarkkinoiden tehokkuutta ja random walk -hypoteesin voimassaoloa. Tavoitteena on myös selvittää esiintyykö viikonpäiväanomalia Kiinan osakemarkkinoilla. Tutkimusaineistona käytetään Shanghain osakepörssin A-sarjan,B-sarjan ja yhdistelmä-sarjan ja Shenzhenin yhdistelmä-sarjan indeksien päivittäisiä logaritmisoituja tuottoja ajalta 21.2.1992-30.12.2005 sekä Shenzhenin osakepörssin A-sarjan ja B-sarjan indeksien päivittäisiä logaritmisoituja tuottoja ajalta 5.10.1992-30.12.2005. Tutkimusmenetelminä käytetään neljä tilastollista menetelmää, mukaan lukien autokorrelaatiotestiä, epäparametrista runs-testiä, varianssisuhdetestiä sekä Augmented Dickey-Fullerin yksikköjuuritestiä. Viikonpäiväanomalian esiintymistä tutkitaan käyttämällä pienimmän neliösumman menetelmää (OLS). Testejä tehdään sekä koko aineistolla että kolmella erillisellä ajanjaksolla. Tämän tutkielman empiiriset tulokset tukevat aikaisempia tutkimuksia Kiinan osakemarkkinoiden tehottomuudesta. Lukuun ottamatta yksikköjuuritestien saatuja tuloksia, autokorrelaatio-, runs- ja varianssisuhdetestien perusteella random walk-hypoteesi hylättiin molempien Kiinan osakemarkkinoiden kohdalla. Tutkimustulokset osoittavat, että molemmilla osakepörssillä B-sarjan indeksien käyttäytyminenon ollut huomattavasti enemmän random walk -hypoteesin vastainen kuin A-sarjan indeksit. Paitsi B-sarjan markkinat, molempien Kiinan osakemarkkinoiden tehokkuus näytti myös paranevan vuoden 2001 markkinabuumin jälkeen. Tutkimustulokset osoittavat myös viikonpäiväanomalian esiintyvän Shanghain osakepörssillä, muttei kuitenkaan Shenzhenin osakepörssillä koko tarkasteluajanjaksolla.

Observations on Software Testing Practice

This thesis investigates factors that affect software testing practice. The thesis consists of empirical studies, in which the affecting factors were analyzed and interpreted using quantitative and qualitative methods. First, the Delphi method was used to specify the scope of the thesis. Secondly, for the quantitative analysis 40industry experts from 30 organizational units (OUs) were interviewed. The survey method was used to explore factors that affect software testing practice. Conclusions were derived using correlation and regression analysis. Thirdly, from these 30 OUs, five were further selected for an in-depth case study. The data was collected through 41 semi-structured interviews. The affecting factors and their relationships were interpreted with qualitative analysis using grounded theory as the research method. The practice of software testing was analyzed from the process improvement and knowledge management viewpoints. The qualitative and quantitativeresults were triangulated to increase the validity of the thesis. Results suggested that testing ought to be adjusted according to the business orientation of the OU; the business orientation affects the testing organization and knowledge management strategy, and the business orientation andthe knowledge management strategy affect outsourcing. As a special case, the complex relationship between testing schedules and knowledge transfer is discussed. The results of this thesis can be used in improvingtesting processes and knowledge management in software testing.

Automated formulation of optimisation models for steel beam structures

Over 70% of the total costs of an end product are consequences of decisions that are made during the design process. A search for optimal cross-sections will often have only a marginal effect on the amount of material used if the geometry of a structure is fixed and if the cross-sectional characteristics of its elements are property designed by conventional methods. In recent years, optimalgeometry has become a central area of research in the automated design of structures. It is generally accepted that no single optimisation algorithm is suitable for all engineering design problems. An appropriate algorithm, therefore, mustbe selected individually for each optimisation situation. Modelling is the mosttime consuming phase in the optimisation of steel and metal structures. In thisresearch, the goal was to develop a method and computer program, which reduces the modelling and optimisation time for structural design. The program needed anoptimisation algorithm that is suitable for various engineering design problems. Because Finite Element modelling is commonly used in the design of steel and metal structures, the interaction between a finite element tool and optimisation tool needed a practical solution. The developed method and computer programs were tested with standard optimisation tests and practical design optimisation cases. Three generations of computer programs are developed. The programs combine anoptimisation problem modelling tool and FE-modelling program using three alternate methdos. The modelling and optimisation was demonstrated in the design of a new boom construction and steel structures of flat and ridge roofs. This thesis demonstrates that the most time consuming modelling time is significantly reduced. Modelling errors are reduced and the results are more reliable. A new selection rule for the evolution algorithm, which eliminates the need for constraint weight factors is tested with optimisation cases of the steel structures that include hundreds of constraints. It is seen that the tested algorithm can be used nearly as a black box without parameter settings and penalty factors of the constraints.

Metal surface and subsurface inspection using nondestructive optical methods

This thesis considers nondestructive optical methods for metal surface and subsurface inspection. The main purpose of this thesis was to study some optical methods in order to find out their applicability to industrial measurements. In laboratory testing the simplest light scattering approach, measurement of specular reflectance, was used for surface roughness evaluation. Surface roughness, curvature and finishing process of metal sheets were determined by specular reflectance measurements. Using a fixed angleof incidence, the specular reflectance method might be automated for industrialinspection. For defect detection holographic interferometry and thermography were compared. Using either holographic interferometry or thermography, relativelysmall-size defects in metal plates could be revealed. Holographic techniques have some limitations for industrial measurements. On the contrary, thermography has excellent prospects for on-line inspection, especially with scanning techniques.

Testing website usability in Spanish-Speaking Academia through heuristic evaluation and cognitive walkthroughs

Although usability evaluations have been focused on assessing different contexts of use, no proper specifications have been addressed towards the particular environment of academic websites in the Spanish-speaking context of use. Considering that this context involves hundreds of millions of potential users, the AIPO Association is running the UsabAIPO Project. The ultimate goal is to promote an adequate translation of international standards, methods and ideal values related to usability in order to adapt them to diverse Spanish-related contexts of use. This article presents the main statistical results coming from the Second and Third Stages of the UsabAIPO Project, where the UsabAIPO Heuristic method (based on Heuristic Evaluation techniques) and seven Cognitive Walkthroughs were performed over 69 university websites. The planning and execution of the UsabAIPO Heuristic method and the Cognitive Walkthroughs, the definition of two usability metrics, as well as the outline of the UsabAIPO Heuristic Management System prototype are also sketched.

Testing the influence of topography and material properties on catchment-scale soil moisture patterns using remotely sensed vegetation patterns in a humid temperate catchment, northern Britain

In order to evaluate the relationship between the apparent complexity of hillslope soil moisture and the emergent patterns of catchment hydrological behaviour and water quality, we need fine-resolution catchment-wide data on soil moisture characteristics. This study proposes a methodology whereby vegetation patterns obtained from high-resolution orthorectified aerial photographs are used as an indicator of soil moisture characteristics. This enables us to examine a set of hypotheses regarding what drives the spatial patterns of soil moisture at the catchment scale (material properties or topography). We find that the pattern of Juncus effusus vegetation is controlled largely by topography and mediated by the catchment's material properties. Characterizing topography using the topographic index adds value to the soil moisture predictions relative to slope or upslope contributing area (UCA). However, these predictions depart from the observed soil moisture patterns at very steep slopes or low UCAs. Copyright (c) 2012 John Wiley & Sons, Ltd.

Automated monitoring of medical protocols: a secure and distributed architecture

The control of the right application of medical protocols is a key issue in hospital environments. For the automated monitoring of medical protocols, we need a domain-independent language for their representation and a fully, or semi, autonomous system that understands the protocols and supervises their application. In this paper we describe a specification language and a multi-agent system architecture for monitoring medical protocols. We model medical services in hospital environments as specialized domain agents and interpret a medical protocol as a negotiation process between agents. A medical service can be involved in multiple medical protocols, and so specialized domain agents are independent of negotiation processes and autonomous system agents perform monitoring tasks. We present the detailed architecture of the system agents and of an important domain agent, the database broker agent, that is responsible of obtaining relevant information about the clinical history of patients. We also describe how we tackle the problems of privacy, integrity and authentication during the process of exchanging information between agents.

Optimal capital structure: a trade-off model and its empirical testing

In the present research we have set forth a new, simple, Trade-Off model that would allow us to calculate how much debt and, by default, how much equity a company should have, using easily available information and calculating the cost of debt dynamically on the basis of the effect that the capital structure of the company has on the risk of bankruptcy; in an attempt to answer this question. The proposed model has been applied to the companies that make up the Dow Jones Industrial Average (DJIA) in 2007. We have used consolidated financial data from 1996 to 2006, published by Bloomberg. We have used simplex optimization method to find the debt level that maximizes firm value. Then, we compare the estimated debt with real debt of companies using statistical nonparametric Mann-Whitney. The results indicate that 63% of companies do not show a statistically significant difference between the real and the estimated debt.

Optimizing the Testing Process in Module Testing – Functional Testing Interface

Today's business environment has become increasingly unexpected and fast changing because of the global competition. This new environment requires the companies to organize their control differently, e.g. by logistic process thinking. Logistic process thinking in software engineering applies the principles of production process to immaterial products. Processes must be optimized, so that every phase adds value to the customer, and the lead times can be cut shorter to meet the new customer requirements. The purpose of this thesis is to examine and optimize the testing processes of software engineering concentrating on module testing, functional testing and their interface. The concept of logistic process thinking is introduced through production process, value added model and process management. Also theory of testing based on literature is presented, concentrating on module testing and functional testing. The testing processes of the Case Company are presented together with the project models in which they are implemented. The real life practices in module testing and functional testing and their interface are examined through interviews. These practices are analyzed against the processes and the testing theory, through which ideas for optimizing the testing process are introduced. The project world of the Case Company is also introduced together with two example testing projects in different life cycle phases. The examples give a view of how much effort of the project is put in different types of testing.