An Empirically Based Stochastic Turbulence Simulator with Temporal Coherence for Wind Energy Applications

In this dissertation, we develop a novel methodology for characterizing and simulating nonstationary, full-field, stochastic turbulent wind fields.

In this new method, nonstationarity is characterized and modeled via temporal coherence, which is quantified in the discrete frequency domain by probability distributions of the differences in phase between adjacent Fourier components.

The empirical distributions of the phase differences can also be extracted from measured data, and the resulting temporal coherence parameters can quantify the occurrence of nonstationarity in empirical wind data.

This dissertation (1) implements temporal coherence in a desktop turbulence simulator, (2) calibrates empirical temporal coherence models for four wind datasets, and (3) quantifies the increase in lifetime wind turbine loads caused by temporal coherence.

The four wind datasets were intentionally chosen from locations around the world so that they had significantly different ambient atmospheric conditions.

The prevalence of temporal coherence and its relationship to other standard wind parameters was modeled through empirical joint distributions (EJDs), which involved fitting marginal distributions and calculating correlations.

EJDs have the added benefit of being able to generate samples of wind parameters that reflect the characteristics of a particular site.

Lastly, to characterize the effect of temporal coherence on design loads, we created four models in the open-source wind turbine simulator FAST based on the \windpact turbines, fit response surfaces to them, and used the response surfaces to calculate lifetime turbine responses to wind fields simulated with and without temporal coherence.

The training data for the response surfaces was generated from exhaustive FAST simulations that were run on the high-performance computing (HPC) facilities at the National Renewable Energy Laboratory.

This process was repeated for wind field parameters drawn from the empirical distributions and for wind samples drawn using the recommended procedure in the wind turbine design standard \iec.

The effect of temporal coherence was calculated as a percent increase in the lifetime load over the base value with no temporal coherence.

Physical Insights, Steady Aerodynamic Effects, and a Design Tool for Low-Pressure Turbine Flutter

The successful, efficient, and safe turbine design requires a thorough understanding of the underlying physical phenomena. This research investigates the physical understanding and parameters highly correlated to flutter, an aeroelastic instability prevalent among low pressure turbine (LPT) blades in both aircraft engines and power turbines. The modern way of determining whether a certain cascade of LPT blades is susceptible to flutter is through time-expensive computational fluid dynamics (CFD) codes. These codes converge to solution satisfying the Eulerian conservation equations subject to the boundary conditions of a nodal domain consisting fluid and solid wall particles. Most detailed CFD codes are accompanied by cryptic turbulence models, meticulous grid constructions, and elegant boundary condition enforcements all with one goal in mind: determine the sign (and therefore stability) of the aerodynamic damping. The main question being asked by the aeroelastician, ``is it positive or negative?'' This type of thought-process eventually gives rise to a black-box effect, leaving physical understanding behind. Therefore, the first part of this research aims to understand and reveal the physics behind LPT flutter in addition to several related topics including acoustic resonance effects. A percentage of this initial numerical investigation is completed using an influence coefficient approach to study the variation the work-per-cycle contributions of neighboring cascade blades to a reference airfoil. The second part of this research introduces new discoveries regarding the relationship between steady aerodynamic loading and negative aerodynamic damping. Using validated CFD codes as computational wind tunnels, a multitude of low-pressure turbine flutter parameters, such as reduced frequency, mode shape, and interblade phase angle, will be scrutinized across various airfoil geometries and steady operating conditions to reach new design guidelines regarding the influence of steady aerodynamic loading and LPT flutter. Many pressing topics influencing LPT flutter including shocks, their nonlinearity, and three-dimensionality are also addressed along the way. The work is concluded by introducing a useful preliminary design tool that can estimate within seconds the entire aerodynamic damping versus nodal diameter curve for a given three-dimensional cascade.

Performance of a single liquid column damper for the control of dynamic responses of a tension leg platform

Tuned liquid column dampers have been proved to be successful in mitigating the dynamic responses of civil infrastructure. There have been some recent applications of this concept on wind turbines and this passive control system can help to mitigate responses of offshore floating platforms and wave devices. The control of dynamic responses of these devices is important for reducing loads on structural elements and facilitating operations and maintenance (O&M) activities. This paper outlines the use of a tuned single liquid column damper for the control of a tension leg platform supported wind turbine. Theoretical studies were carried out and a scaled model was tested in a wave basin to assess the performance of the damper. The tests on the model presented in this paper correspond to a platform with a very low natural frequency for surge, sway and yaw motions. For practical purposes, it was not possible to tune the liquid damper exactly to this frequency. The consequent approach taken and the efficiency of such approach are presented in this paper. Responses to waves of a single frequency are investigated along with responses obtained from wave spectra characterising typical sea states. The extent of control is quantified using peak and root mean squared dynamic responses respectively. The tests present some guidelines and challenges for testing scaled devices in relation to including response control mechanisms. Additionally, the results provide a basis for dictating future research on tuned liquid column damper based control on floating platforms.

Dynamic effects of anchor positional tolerance on tension moored floating wind turbine

For water depths greater than 60m floating wind turbines will become the most economical option for generating offshore wind energy. Tension mooring stabilised units are one type of platform being considered by the offshore wind energy industry. The complex mooring arrangement used by this type of platform means that the dynamics are greatly effected by offsets in the positioning of the anchors. This paper examines the issue of tendon anchor position tolerances. The dynamic effects of three positional tolerances are analysed in survival state using the time domain FASTLink. The severe impact of worst case anchor positional offsets on platform and turbine survivability is shown. The worst anchor misposition combinations are highlighted and should be strongly avoided. Novel methods to mitigate this issue are presented.

Description of an 8 MW reference wind turbine

An 8 MW wind turbine is described in terms of mass distribution, dimensions, power curve, thrust curve, maximum design load and tower configuration. This turbine has been described as part of the EU FP7 project LEANWIND in order to facilitate research into logistics and naval architecture efficiencies for future offshore wind installations. The design of this 8 MW reference wind turbine has been checked and validated by the design consultancy DNV-GL. This turbine description is intended to bridge the gap between the NREL 5 MW and DTU 10 MW reference turbines and thus contribute to the standardisation of research and development activities in the offshore wind energy industry.

Wind Resource Mapping Using Landscape Roughness and Spatial Interpolation Methods

Energy saving, reduction of greenhouse gasses and increased use of renewables are key policies to achieve the European 2020 targets. In particular, distributed renewable energy sources, integrated with spatial planning, require novel methods to optimise supply and demand. In contrast with large scale wind turbines, small and medium wind turbines (SMWTs) have a less extensive impact on the use of space and the power system, nevertheless, a significant spatial footprint is still present and the need for good spatial planning is a necessity. To optimise the location of SMWTs, detailed knowledge of the spatial distribution of the average wind speed is essential, hence, in this article, wind measurements and roughness maps were used to create a reliable annual mean wind speed map of Flanders at 10 m above the Earth’s surface. Via roughness transformation, the surface wind speed measurements were converted into meso- and macroscale wind data. The data were further processed by using seven different spatial interpolation methods in order to develop regional wind resource maps. Based on statistical analysis, it was found that the transformation into mesoscale wind, in combination with Simple Kriging, was the most adequate method to create reliable maps for decision-making on optimal production sites for SMWTs in Flanders (Belgium).

Predictable hydrodynamic conditions explain temporal variations in the density of benthic foraging seabirds in a tidal stream environment

Tidal stream turbines could have several direct impacts upon pursuit-diving seabirds foraging within tidal stream environments (mean horizontal current speeds > 2 ms−1), including collisions and displacement. Understanding how foraging seabirds respond to temporally variable but predictable hydrodynamic conditions immediately around devices could identify when interactions between seabirds and devices are most likely to occur; information which would quantify the magnitude of potential impacts, and also facilitate the development of suitable mitigation measures. This study uses shore-based observational surveys and Finite Volume Community Ocean Model outputs to test whether temporally predictable hydrodynamic conditions (horizontal current speeds, water elevation, turbulence) influenced the density of foraging black guillemots Cepphus grylle and European shags Phalacrocorax aristotelis in a tidal stream environment in Orkney, United Kingdom, during the breeding season. These species are particularly vulnerable to interactions with devices due to their tendency to exploit benthic and epi-benthic prey on or near the seabed. The density of both species decreased as a function of horizontal current speeds, whereas the density of black guillemots also decreased as a function of water elevation. These relationships could be linked to higher energetic costs of dives in particularly fast horizontal current speeds (>3 ms−1) and deeper water. Therefore, interactions between these species and moving components seem unlikely at particularly high horizontal current speeds. Combining this information, with that on the rotation rates of moving components at lower horizontal current speeds, could be used to assess collision risk in this site during breeding seasons. It is also likely that moderating any device operation during both lowest water elevation and lowest horizontal current speeds could reduce the risk of collisions for these species in this site during this season. The approaches used in this study could have useful applications within Environmental Impact Assessments, and should be considered when assessing and mitigating negative impacts from specific devices within development sites.

Unstructured grid modelling of offshore wind farm impacts on seasonally stratified shelf seas

Shelf seas comprise approximately 7% of the world’s oceans and host enormous economic activity. Development of energy installations (e.g. Offshore Wind Farms (OWFs), tidal turbines) in response to increased demand for renewable energy requires a careful analysis of potential impacts. Recent remote sensing observations have identified kilometrescale impacts from OWFs. Existing modelling evaluating monopile impacts has fallen into two camps: small-scale models with individually resolved turbines looking at local effects; and large-scale analyses but with sub-grid scale turbine parameterisations. This work straddles both scales through a 3D unstructured grid model (FVCOM): wind turbine monopiles in the eastern Irish Sea are explicitly described in the grid whilst the overall grid domain covers the south-western UK shelf. Localised regions of decreased velocity extend up to 250 times the monopile diameter away from the monopile. Shelf-wide, the amplitude of the M2 tidal constituent increases by up to 7%. The turbines enhance localised vertical mixing which decreases seasonal stratification. The spatial extent of this extends well beyond the turbines into the surrounding seas. With significant expansion of OWFs on continental shelves, this work highlights the importance of how OWFs may impact coastal (e.g. increased flooding risk) and offshore (e.g. stratification and nutrient cycling) areas.

Unstructured grid modelling of offshore wind farm impacts on seasonally stratified shelf seas

Shelf seas comprise approximately 7% of the world’s oceans and host enormous economic activity. Development of energy installations (e.g. Offshore Wind Farms (OWFs), tidal turbines) in response to increased demand for renewable energy requires a careful analysis of potential impacts. Recent remote sensing observations have identified kilometrescale impacts from OWFs. Existing modelling evaluating monopile impacts has fallen into two camps: small-scale models with individually resolved turbines looking at local effects; and large-scale analyses but with sub-grid scale turbine parameterisations. This work straddles both scales through a 3D unstructured grid model (FVCOM): wind turbine monopiles in the eastern Irish Sea are explicitly described in the grid whilst the overall grid domain covers the south-western UK shelf. Localised regions of decreased velocity extend up to 250 times the monopile diameter away from the monopile. Shelf-wide, the amplitude of the M2 tidal constituent increases by up to 7%. The turbines enhance localised vertical mixing which decreases seasonal stratification. The spatial extent of this extends well beyond the turbines into the surrounding seas. With significant expansion of OWFs on continental shelves, this work highlights the importance of how OWFs may impact coastal (e.g. increased flooding risk) and offshore (e.g. stratification and nutrient cycling) areas.

Combustion Noise

Combustion noise is becoming increasingly important as a major noise source in aeroengines and ground based gas turbines. This is partially because advances in design have reduced the other noise sources, and partially because next generation combustion modes burn more unsteadily, resulting in increased external noise from the combustion. This review reports recent progress made in understanding combustion noise by theoretical, numerical and experimental investigations. We first discuss the fundamentals of the sound emission from a combustion region. Then the noise of open turbulent flames is summarized. We subsequently address the effects of confinement on combustion noise. In this case not only is the sound generated by the combustion influenced by its transmission through the boundaries of the combustion chamber, there is also the possibility of a significant additional source, the so-called ‘indirect’ combustion noise. This involves hot spots (entropy fluctuations) or vorticity perturbations produced by temporal variations in combustion, which generate pressure waves (sound) as they accelerate through any restriction at the exit of the combustor. We describe the general characteristics of direct and indirect noise. To gain further insight into the physical phenomena of direct and indirect sound, we investigate a simple configuration consisting of a cylindrical or annular combustor with a low Mach number flow in which a flame zone burns unsteadily. Using a low Mach number approximation, algebraic exact solutions are developed so that the parameters controlling the generation of acoustic, entropic and vortical waves can be investigated. The validity of the low Mach number approximation is then verified by solving the linearized Euler equations numerically for a wide range of inlet Mach numbers, stagnation temperature ratios, frequency and mode number of heat release fluctuations. The effects of these parameters on the magnitude of the waves produced by the unsteady combustion are investigated. In particular the magnitude of the indirect and direct noise generated in a model combustor with a choked outlet is analyzed for a wide range of frequencies, inlet Mach numbers and stagnation temperature ratios. Finally, we summarize some of the unsolved questions that need to be the focus of future research

Investigation of the effects of flow conditions at rotor inlet on mixed flow turbine performance for automotive applications

Current trends in the automotive industry have placed increased importance on engine downsizing for passenger vehicles. Engine downsizing often results in reduced power output and turbochargers have been relied upon to restore the power output and maintain drivability. As improved power output is required across a wide range of engine operating conditions, it is necessary for the turbocharger to operate effectively at both design and off-design conditions. One off-design condition of considerable importance for turbocharger turbines is low velocity ratio operation, which refers to the combination of high exhaust gas velocity and low turbine rotational speed. Conventional radial flow turbines are constrained to achieve peak efficiency at the relatively high velocity ratio of 0.7, due the requirement to maintain a zero inlet blade angle for structural reasons. Several methods exist to potentially shift turbine peak efficiency to lower velocity ratios. One method is to utilize a mixed flow turbine as an alternative to a radial flow turbine. In addition to radial and circumferential components, the flow entering a mixed flow turbine also has an axial component. This allows the flow to experience a non-zero inlet blade angle, potentially shifting peak efficiency to a lower velocity ratio when compared to an equivalent radial flow turbine.
This study examined the effects of varying the flow conditions at the inlet to a mixed flow turbine and evaluated the subsequent impact on performance. The primary parameters examined were average inlet flow angle, the spanwise distribution of flow angle across the inlet and inlet flow cone angle. The results have indicated that the inlet flow angle significantly influenced the degree of reaction across the rotor and the turbine efficiency. The rotor studied was a custom in-house design based on a state-of-the-art radial flow turbine design. A numerical approach was used as the basis for this investigation and the numerical model has been validated against experimental data obtained from the cold flow turbine test rig at Queen’s University Belfast. The results of the study have provided a useful insight into how the flow conditions at rotor inlet influence the performance of a mixed flow turbine.

Konzeption, Implementierung und Anwendung eines automatisierten aerothermodynamischen Vorentwurfsprozesses für Axialturbinen

In dieser Arbeit wird ein Prozess für den frühen aerothermodynamischen Entwurf von Axialturbinen konzipiert und durch Kopplung einzelner Computerprogramme im DLR Göttingen realisiert. Speziell für die Erstauslegung von Geometrien und die Vorhersage von globalen Leistungsdaten beliebiger Axialturbinen wurde ein neues Programm erzeugt. Dessen effiziente Anwendung wird mit einer zu diesem Zweck konzipierten grafischen Entwurfsumgebung ausgeführt. Kennzeichnend für den Vorentwurfsprozess in dieser Arbeit ist die Anwendung von ein- und zweidimensionaler Strömungssimulation sowie der hohe Grad an Verknüpfung der verwendeten Programme sowohl auf prozesstechnischer wie auch auf datentechnischer Ebene. Dabei soll dem sehr frühen Entwurf eine deutlich stärkere Rolle zukommen als bisher üblich und im Gegenzug die Entwurfszeit mit höher auflösenden Vorentwurfsprogrammen reduziert werden. Die Anwendung der einzelnen Programme im Rahmen von Subprozessen wird anhand von exemplarischen Turbinenkonfigurationen in der Arbeit ebenso dargestellt, wie die Validierung des gesamten Entwurfsprozesses anhand der Auslegung einer folgend realisierten und erfolgreich operierenden Axialturbine eines Triebwerkssimulators für Flugzeug-Windkanalmodelle (TPS). Neben der Erleichterung von manueller Entwurfstätigkeit durch grafische Benutzerinteraktion kommt in einzelnen Subprozessen eine automatisierte Mehrziel-Optimierung zum Einsatz.

Diseño de una turbina experimental de vapor de baja potencia.

Este trabajo se enfoca en el diseño de una turbina de vapor de carácter experimental para simular, en un laboratorio de transferencia térmica, la dinámica propia de una turbina de mayor tamaño en el circuito secundario de un ciclo de potencia. La máquina diseñada produciría 185 kW de potencia en el eje a 9.000 RPM con un rendimiento interno del 88 %, tomando en la entrada 0,4 kg/s de vapor saturado a 40 bar y descargando a una presión de 1,5 bar. Se desarrolló la teoría de turbomáquinas necesaria para realizar los cálculos fuidodinámicos y se propuso un método de diseño apropiado para el alcance del trabajo. Se decidió que la turbina sería de tres etapas, dos Curtis y una de impulso, y se realizaron los cálculos correspondientes. Una vez que el diseño fluidodinámico estaba definido, se procedió a dimensionar los distintos elementos mecánicos, con el alcance correspondiente a ingeniería conceptual y básica. Se realizaron detalladamente los cálculos propios del dimensionado del rotor (eje y discos), rodamientos, carcasa, válvula de seguridad de presión y asociados. Además se presentó el diseño conceptual de los elementos restantes, sistema de control y otros auxiliares. Finalmente, se realizaron los modelos en software 3D de todas las piezas y se produjeron los planos correspondientes.

Integración de aerogeneradores de baja potencia en la red de baja tensión

[EN] The current energy model is unsustainable economically, environmentally and socially forcing develop renewable technologies that modify the concept to the responsible use. The use of low-power wind turbines has generally been limited to isolated which has slowed their development systems. The study addresses this technological niche to deepen their study of integration of electricity on a low voltage network. For this first wind potential with Homer software is evaluated. Various scenarios are simulated in "The IEEE European Test Low Voltage Feeder" network using the software OpenDSS widely used in studies of Generation Distributed by EPRI (Electric Power Research Institute).

Renar och vindkraft II : Vindkraft i drift och effekter på renar och renskötsel

Utbyggnaden av vindkraft inom renskötselområdet har ökat markant det senaste decenniet, trots att kunskapen om påverkan av vindkraftsetableringar ännu inte är fullt utredd och dokumenterad. I den här rapporten beskriver vi framförallt hur vindkraftparker i driftsfas påverkar renarna och renskötseln i tre olika områden. I Malå sameby har vi studerat kalvningsområdet kring Storliden och Jokkmokkslidens vindkraftparker. I Vilhelmina Norra sameby har vi studerat vinterbetesområdet kring Stor-Rotlidens vindkraftpark, samt Lögdeålandets betesområde med Gabrielsbergets vindkraftpark som används av Byrkije reinbetesdistrikt från Norge. För att få en helhetsbild av hur renarna använder sitt betesområde är det viktigt att studera renarnas betes- och förflyttningsmönster långsiktigt och över hela deras betesområde och inte bara inom det lokala området nära parken. Det är också viktigt att ta hänsyn till att renarnas betesutnyttjande skiftar från år till år och mellan olika årstider beroende på väderlek och andra yttre förutsättningar. Vi vill också understryka vikten av att kombinera den traditionella kunskapen från renskötarna med vedertagna vetenskapliga analysmetoder för att besvara de frågor som är viktiga för att kunna bedriva en hållbar renskötsel. Vi har undersökt renarnas användning av områdena genom att utföra spillningsinventeringar under åren 2009-2015 (endast i Malå sameby), och genom att följa renar utrustade med GPS-halsband under åren 2005-2015. Datat är insamlat före och under byggfas och under driftsfas (för Gabrielsberget finns GPS-data endast för driftsfasen). Vi har analyserat data genom att utveckla statistiska modeller för val av betesområde för varje område där vi har beräknat hur renarna förhåller sig till vindkraftparksområdet före, under och efter byggnation, och på Gabrielsberget när parken varit avstängd under 40 dagar och under drift vid olika renskötselsituationer. Genom intervjuer, möten och samtal, samt information från Gabrielsbergets vindkraftparks kontrollprogram, har vi tagit del av renskötarnas erfarenheter av hur renarnas beteende, och därmed även renskötseln, påverkats av vindkraftsutbyggnaden i respektive område. Våra resultat visar att renarna både på kalvnings- och på vinterbetesområden påverkas negativt av vindkraftsetableringarna (Tabell a). Renarna undviker att beta i områden där de kan se och/eller höra vindkraftsverken och föredrar att vistas i områden där vindkraftverken är skymda. I kalvningsområdet i Malå ökade användningen av skymda områden med 60 % under driftsfas. I vinterbetesområdet på Gabrielsberget, när renarna utfodrades i parken och kantbevakades intensivt för att stanna i parkområdet under driftsfas, ökade användningen av skymda områden med 13 % jämfört med när de inte var utfodrade och fick ströva mer fritt. Resultaten visar också att renarna minskar sin användning av området nära vindkraftparkerna. I kalvningslandet i Malå minskar renarna sin användning av områden inom 5 km från parkerna med 16-20 %. Vintertid vid Gabrielsbergets vindkraftpark undvek renarna parken med 3 km. Våra resultat visar även att renarnas betesro minskar inom en radie på 4 km från vindkraftparkerna under kalvningsperioden och tiden därefter i jämförelse med perioden före byggfas. Exakta avstånd som renarna påverkas beror på förutsättningarna i respektive område, exempelvis hur topografin ser ut eller om området är begränsat av stängsel eller annan infrastruktur. Förändringarna i habitatutnyttjande i våra studieområden blev tydligare när parkerna var centralt belägna i renarnas betesområde, som i kalvningsområdet i Malå eller i vinterbeteslandet på Gabrielsberget, medan det inte var lika tydliga effekter kring Stor-Rotlidens park, som ligger i utkanten av ett huvudbetesområde. Oftast är snöförhållandena bättre ur betessynpunkt högre upp i terrängen än nere i dalgångarna, på grund av stabilare temperatur, vind som blåser bort snötäcket och mer variation i topografin. Därför kan etablering av vindkraftparker i höglänta områden försämra möjligheten att använda sådana viktiga reservbetesområden under vintrar med i övrigt dåliga snöförhållanden, vilka blir allt vanligare i och med klimatförändringarna. Våra resultat tyder inte direkt på att renarna påverkats negativt under dåliga betesvintrar men fler år av studier behövs för att ytterligare klargöra hur vindkraft påverkar renarna under dessa vintrar. Våra studier har visat att etablering av vindkraft har konsekvenser för renskötseln under både barmarkssäsongen och under vintern, men effekterna förmodas få störst inverkan inom vinterbetesområdet där det är svårt att hitta alternativa betesområden för renarna. Under sommaren är betestillgången oftast mindre begränsad och renarna kan lättare hitta alternativa områden. En direkt konsekvens av Gabrielsbergets vindkraftpark som är placerad mitt i ett vinterbetesområde har blivit att renarna behöver tillskottsutfodras och bevakas intensivare för att de inte ska gå ut ur området. När den naturliga vandringen mellan olika betesområden störs för att renarna undviker att vistas i ett område kan det leda till att den totala tillgången till naturligt bete minskar och att man permanent måste tillskottsutfodra, alternativt minska antalet renar. Annan infrastruktur som vägar och kraftledningar påverkar också renarna. Vid Storliden och Jokkmokksliden och vid Stor-Rotliden där data samlats in innan vindkraftparken uppfördes visar våra resultat att renarna undviker de omkringliggande landsvägarna redan innan parkerna etablerades. Vid Stor-Rotliden ökar dock renarna användningen av områden nära vägarna efter att parken är byggd. På Gabrielsberget, där vi endast har data under drifttiden, är renarna närmare vägarna (även stora vägar som E4) när renskötarna minskar på kantbevakningen för att inte hålla renarna nära parken. Detta ökar naturligtvis risken för trafikolyckor och innebär att renskötarna måste bevaka dessa områden intensivare. Sist i rapporten presenterar vi förslag till åtgärder som kan användas för att underlätta arbetet för renskötseln om det är så att en vindkraftpark redan är byggd. Några exempel på åtgärder som är direkt kopplat till parken är att stänga av vägarna in i vindkraftparken för att förhindra nöjeskörning med skoter och bil under den tiden renarna vistas i området samt tät dialog mellan vindkraftsbolag och sameby angående vinterväghållningen av vägarna till och inom vindkraftparken. Andra mer regionala åtgärder för att förbättra förutsättningarna för renskötselarbetet på andra platser för samebyn, kan vara att sätta stängsel längst större vägar och järnvägar (t.ex. E4:an eller stambanan) i kombination med strategiskt utplacerade ekodukter. Detta för att underlätta och återställa möjligheterna till renarnas fria strövning och renskötarnas flytt av renar mellan olika betesområden.