THz Plasma Waves in Field-Effect-Transistors: A Monte Carlo Study

Sensing with electromagnetic waves having frequencies in the Terahertz-range is a very attractive investigative method with applications in fundamental research and industrial settings. Up to now, a lot of sources and detectors are available. However, most of these systems are bulky and have to be used in controllable environments such as laboratories. In 1993 Dyakonov and Shur suggested that plasma waves developing in field-effect-transistors can be used to emit and detect THz-radiation. Later on, it was shown that these plasma waves lead to rectification and allows for building efficient detectors. In contrast to the prediction that these plasma waves lead to new promising solid-state sources, only a few weak sources are known up to now. This work studies THz plasma waves in semiconductor devices using the Monte Carlo method in order to resolve this issue. A fast Monte Carlo solver was developed implementing a nonparabolic bandstructure representation of the used semiconductors. By investigating simplified field-effect-transistors it was found that the plasma frequency follows under equilibrium conditions the analytical predictions. However, no current oscillations were found at room temperature or with a current flowing in the channel. For more complex structures, consisting of ungated and gated regions, it was found that the plasma frequency does not follow the value predicted by the dispersion relation of the gated nor the ungated device.

Contact Sensing: A Sequential Decision Approach to Sensing Manipulation Contact

This paper describes a new statistical, model-based approach to building a contact state observer. The observer uses measurements of the contact force and position, and prior information about the task encoded in a graph, to determine the current location of the robot in the task configuration space. Each node represents what the measurements will look like in a small region of configuration space by storing a predictive, statistical, measurement model. This approach assumes that the measurements are statistically block independent conditioned on knowledge of the model, which is a fairly good model of the actual process. Arcs in the graph represent possible transitions between models. Beam Viterbi search is used to match measurement history against possible paths through the model graph in order to estimate the most likely path for the robot. The resulting approach provides a new decision process that can be use as an observer for event driven manipulation programming. The decision procedure is significantly more robust than simple threshold decisions because the measurement history is used to make decisions. The approach can be used to enhance the capabilities of autonomous assembly machines and in quality control applications.

Pose Determination of a Grasped Object Using Limited Sensing

This report explores methods for determining the pose of a grasped object using only limited sensor information. The problem of pose determination is to find the position of an object relative to the hand. The information is useful when grasped objects are being manipulated. The problem is hard because of the large space of grasp configurations and the large amount of uncertainty inherent in dexterous hand control. By studying limited sensing approaches, the problem's inherent constraints can be better understood. This understanding helps to show how additional sensor data can be used to make recognition methods more effective and robust.

Non-linear mechanical behavior of the elastomer polydimethylsiloxane (PDMS) used in the manufacture of microfluidic devices

Polydimethylsiloxane (PDMS) is the elastomer of choice to create a variety of microfluidic devices by soft lithography techniques (eg., [1], [2], [3], [4]). Accurate and reliable design, manufacture, and operation of microfluidic devices made from PDMS, require a detailed characterization of the deformation and failure behavior of the material. This paper discusses progress in a recently-initiated research project towards this goal. We have conducted large-deformation tension and compression experiments on traditional macroscale specimens, as well as microscale tension experiments on thin-film (≈ 50µm thickness) specimens of PDMS with varying ratios of monomer:curing agent (5:1, 10:1, 20:1). We find that the stress-stretch response of these materials shows significant variability, even for nominally identically prepared specimens. A non-linear, large-deformation rubber-elasticity model [5], [6] is applied to represent the behavior of PDMS. The constitutive model has been implemented in a finite-element program [7] to aid the design of microfluidic devices made from this material. As a first attempt towards the goal of estimating the non-linear material parameters for PDMS from indentation experiments, we have conducted micro-indentation experiments using a spherical indenter-tip, and carried out corresponding numerical simulations to verify how well the numerically-predicted P(load-h(depth of indentation) curves compare with the corresponding experimental measurements. The results are encouraging, and show the possibility of estimating the material parameters for PDMS from relatively simple micro-indentation experiments, and corresponding numerical simulations.

Fabrication of Controlled Release Devices Using Supercritical Antisolvent Method

In this study, the supercritical antisolvent with enhanced mass transfer method (SASEM) is used to fabricate micro and nanoparticles of biocompatible and biodegradable polymer PLGA (poly DL lactide co glycolic acid). This process may be extended to the encapsulation of drugs in these micro and nanoparticles for controlled release purposes. Conventional supercritical antisolvent (SAS) process involves spraying a solution (organic solvent + dissolved polymer) into supercritical fluid (CO[subscript 2]), which acts as an antisolvent. The high rate of mass transfer between organic solvent and supercritical CO[subscript 2] results in supersaturation of the polymer in the spray droplet and precipitation of the polymer as micro or nanoparticles occurs. In the SASEM method, ultrasonic vibration is used to atomize the solution entering the high pressure with supercritical CO[subscript 2]. At the same time, the ultrasonic vibration generated turbulence in the high pressure vessel, leading to better mass transfer between the organic solvent and the supercritical CO₂. In this study, two organic solvents, acetone and dichloromethane (DCM) were used in the SASEM process. Phase Doppler Particle Analyzer (PDPA) was used to study the ultrasonic atomization of liquid using the ultrasonic probe for the SASEM process. Scanning Electron Microscopy (SEM) was used to study the size and morphology of the polymer particles collected at the end of the process.

Preguntas de los estudiantes sobre dispositivos científicos = Students’ questions about scientific devices

¿Cuáles son, en realidad, las ventajas de los dispositivos científicos usados en laboratorios escolares y en museos de ciencia interactivos, para el aprendizaje de las ciencias en los estudiantes? Un aprendizaje eficaz de las ciencias requiere comprensión. La generación de preguntas para obtener información es uno de los procesos que indican la intención de los estudiantes de comprender una determinada información. Además, la construcción de nuevo conocimiento científico comienza con una buena pregunta. Por tanto, estimular la generación de preguntas destinadas a obtener información (ISQ) podría ser un elemento que mejorara el aprendizaje profundo de las ciencias escolares

Silicon Chips and Nano Devices

A look at the Southampton Nanfabrication Centre where electro-photonic research is carried out and the AMD company's industrial processes for creating commercial quantities of silicon computing devices.

Teleconsultation in sexual and reproductive health for young adults through mobile devices: Experience in Colombia

Background: Sexual risk behaviors associated with poor information on sexuality have contributed to major public health problems in the area of sexual and reproductive health in teenagers and young adults in Colombia. Objective: To measure the perception of changes in sexual and reproductive risk behavior after the use of a teleconsultation service via mobile devices in a sample of young adults. Methods: A before and after observational study was designed, where a mobile application to inquire about sexual and reproductive health was developed. The perception of changes in sexual and reproductive health risk behaviors in a sample of young adults after the use of the application was measured using the validated survey “Family Health International (FHI) – Behavioral Surveillance Survey (BSS) – Survey for Adults between 15 to 40 Years”. Non-probabilistic convenience recruitment was undertaken through the study´s web page. Participants answered the survey online before and after the use of the mobile application for a six month period (intervention). For the inferential analysis, data was divided into three groups (dichotomous data, discrete quantitative data, and ordinal data), to compare the results of the questions between the first and the second survey. For all tests, a confidence interval of 95% was established. For dichotomous data, the Chi-squared test was used. For quantitative data, we used the Student’s t-test, and for ordinal data, the Mann-Whitney-Wilcoxon test. Results: A total of 257 subjects were registered in the study and met the selection criteria. The pre-intervention survey was answered by 232 subjects, and 127 completely answered the post-intervention survey, of which 54.3% did not use the application, leaving an effective population of 58 subjects for analysis. 53% (n=31) were female, and 47% (n=27) were male. The mean age was 21 years, ranging between 18 and 40 years. The differences between the answers on the first and the second survey were not statistically significant. The main risk behaviors identified in the population were homosexual relations, non-use of condoms, sexual relations with non-regular and commercial partners, the use of psychoactive substances, and ignorance about the symptoms of sexually transmitted diseases and HIV transmission. Conclusions: Although there were no differences between the pre- and post-intervention results, the study revealed different risk behaviors among the participating subjects. These findings highlight the importance of promoting educational strategies on this matter and the importance of providing patients with easily accessible tools with reliable health information.

Understanding mobile learning : devices, pedagogical implications and research lines

Resumen basado en el de la publicaci??n

Development of a historic hearing devices exhibit

This paper discusses historic hearing devices and their benefits to users.

Training hearing impaired consumer advocates of assistive listening devices

This paper contains a manual for training advocates of assistive listening devices.

Teaching deaf children how to use telecommunication devices for the deaf

This paper discusses the use of telecommunication devices for the deaf (TDD) and teaching children how to use such devices.

A consumer survey designed to identify attitudes, knowledge, acceptance, and use of assistive listening devices in public facilities

This paper presents a consumer survey of hearing-impaired persons used to identify their attitudes, knowledge, acceptance, and use of assistive listening devices in public facilities.

Stapling and Energy Devices

PowerPoint presentation on electrosurgery and surgical stapling