Microsatellite instability in childhood rhabdomyosarcoma is locus specific and correlates with fractional allelic loss.

Replication errors (RERs) were initially identified in hereditary nonpolyposis colon cancer and other tumors of Lynch syndrome II. Mutations in genes involved in mismatch repair give rise to a mutator phenotype, resulting in RERs. The mutator phenotype is thought to predispose to malignant transformation. Here we show that in the embryonal form of childhood rhabdomyosarcoma, RERs also occur, but in contrast to hereditary nonpolyposis colon cancer, only a subset of the microsatellite loci analyzed show RERs. The occurrence of RERs is strongly correlated with increased fractional allelic loss (P < 0.001), suggesting that the occurrence of RERs is a secondary phenomenon in rhabdomyosarcoma. Coincidental loss of genes involved in mismatch repair, possibly due to their proximity to tumor suppressor genes involved in tumor progression of embryonal form of childhood rhabdomyosarcoma, could explain the observed phenomenon.

Mismatch repair in Escherichia coli enhances instability of (CTG)n triplet repeats from human hereditary diseases.

Long CTG triplet repeats which are associated with several human hereditary neuromuscular disease genes are stabilized in ColE1-derived plasmids in Escherichia coli containing mutations in the methyl-directed mismatch repair genes (mutS, mutL, or mutH). When plasmids containing (CTG)180 were grown for about 100 generations in mutS, mutL, or mutH strains, 60-85% of the plasmids contained a full-length repeat, whereas in the parent strain only about 20% of the plasmids contained the full-length repeat. The deletions occur only in the (CTG)180 insert, not in DNA flanking the repeat. While many products of the deletions are heterogeneous in length, preferential deletion products of about 140, 100, 60, and 20 repeats were observed. We propose that the E. coli mismatch repair proteins recognize three-base loops formed during replication and then generate long single-stranded gaps where stable hairpin structures may form which can be bypassed by DNA polymerase during the resynthesis of duplex DNA. Similar studies were conducted with plasmids containing CGG repeats; no stabilization of these triplets was found in the mismatch repair mutants. Since prokaryotic and human mismatch repair proteins are similar, and since several carcinoma cell lines which are defective in mismatch repair show instability of simple DNA microsatellites, these mechanistic investigations in a bacterial cell may provide insights into the molecular basis for some human genetic diseases.

Correction of chromosomal instability and sensitivity to diverse mutagens by a cloned cDNA of the XRCC3 DNA repair gene.

The mutagen-sensitive CHO line irs1SF was previously isolated on the basis of hypersensitivity to ionizing radiation and was found to be chromosomally unstable as well as cross-sensitive to diverse kinds of DNA-damaging agents. The analysis of somatic cell hybrids formed between irs1SF and human lymphocytes implicated a human gene (defined as XRCC3; x-ray repair cross-complementing), which partially restored mitomycin C resistance to the mutant. A functional cDNA that confers mitomycin C resistance was transferred to irs1SF cells by transforming them with an expression cDNA library and obtaining primary and secondary transformants. Functional cDNA clones were recovered from a cosmid library prepared from a secondary transformant. Transformants also showed partial correction of sensitivity to cisplatin and gamma-rays, efficient correction of chromosomal instability, and substantially improved plating efficiency and growth rate. The XRCC3 cDNA insert is approximately 2.5 kb and detects an approximately 3.0-kb mRNA on Northern blots. The cDNA was mapped by fluorescence in situ hybridization to human chromosome 14q32.3, which was consistent with the chromosome concordance data of two independent hybrid clone panels.

On the possibility of coherently stimulated recombination and cosmological structure generation: recombination instability.

Possible instabilities during cosmological recombination may produce an epoch of nonlinear density growth and fractal-like structural patterns out to the horizon scale at that epoch (approximately 200 Mpc today). With this motivation, we examine the consequences of the change in effective radiative recombination reaction rate coefficients produced by intense stimulated emission. The proton-electron recombination is considered as a natural laser, leading to the formation of spatially nonuniform distributions of neutral matter earlier than the recombination epoch.

Characterization of the instability mechanisms affecting slopes on carbonatic Flysch: Alicante (SE Spain), case study

The studied Flysch sequence of Alicante occupies a widely populated area crossed by main communication routes. The slopes existing on this area usually suffer slope instabilities that cause substantial damage and a very high maintenance cost. In order to assess the type of instability mechanisms affecting these heterogeneous carbonatic slopes, in this paper a wide inventory of 194 Flysch rock slopes has been performed, reporting the existing lithologies, their competence and their relative arrangement and the geometrical relationship between bedding and the slope and the associated instability mechanism. All these data have been jointly used for performing an instability mechanisms characterization. For systematically characterizing the wide type of complex rock exposures existing in the study area, they are divided into basic units referred as lithological pattern columns to which the different observed instability mechanisms are associated. Inventoried instability mechanisms are diverse and sometimes are combined with each other. Rockfalls are a very common instability mechanism associated to the differential weathering and sapping of the marly lithologies which are present in a wide number of geometrical combinations. The other instability mechanisms closely depend on the combination of the geometrical and lithological parameters. Therefore, this work provides a new basic tool which can be easily used during preliminary project stages for knowing the instability mechanisms which can affect rock slopes excavated on carbonatic Flysch heterogeneous geological formations.

Abordagem cirúrgica da luxação gleno-umeral em contexto desportivo

Trabalho Final do Curso de Mestrado Integrado em Medicina, Faculdade de Medicina, Universidade de Lisboa, 2014

The Penetration of Financial Instability in Agricultural Credit and Leveraging. Factor Markets Working Paper No. 2, September 2011

This paper describes the aggregate rural capital markets of the EU and the main differences between the markets of its member countries. The results of our study suggest that the agricultural credit markets are still quite segmented and the segments are country- rather than currency- or region specific. Financial instability in Europe is also penetrating the agricultural sector and the variation of interest rates for agricultural credit is increasing across countries. Perhaps the most dramatic signal of growing financial instability is that the financial leverage (gearing rate) of European farms rose in 2008 by almost 4 percentage points, from 14 to 18%. The 4 percentage-point annual rise was twice the 2 percentage-point rise observed during the economic recession in the late 1980s and early 1990s. The distribution of the financial leverage of agriculture across countries does not, however, reflect the distribution of country-specific risk premiums in the manner that they are observed in government bond yields. Therefore, in those countries that have the weakest financial situation in the public sector and in which the bond markets are encumbered with high country-specific risk premiums, the agricultural sector is not directly exposed to a very large risk of increasing interest rates, since it is not so highly leveraged. For example in Greek and Spanish agriculture, the financial leverage (gearing) rate is only 0.6% and 2.2% respectively, while the highest gearing rates are found elsewhere (in Denmark), reaching 50%.

Kazakhstan: the regional success story; Tajikistan: a trial period; Uzbekistan: the major source of instability in Central Asia? OSW Study 15/2004

Kazakhstan: Kazakhstan can boast economic development like no other country in Central Asia. In contrast to other countries of the region, which have rich natural resources, Kazakhstan has managed to use its economic potential in a way that yields concrete benefits now and, at the same time, creates prospects for further sustainable economic growth. Tajikistan: Tajikistan in its present state has been built on the civil war experiences and provisions of the peace accords signed in 1997. These have had a great impact on the present form of the state, its political scene and power mechanisms. President Emomali Rakhmonov is the central figure in the state. The political system, which he has cocreated, is based on - unique in this region - political pluralism (the existence of the Islamic party), decentralisation (far-going independence of the regions and relatively limited potential of the central structures) and compromise as the basic way of resolving conflicts. Such a system has so far guaranteed stabilisation and normalisation of the country. Uzbekistan: With its geographic location, potential, ambitions and political priorities, Uzbekistan could play a leading role in Central Asia. The international community has perceived the country as the pillar of stability in the region. This perception was further reinforced after 11th September 2001 and was certainly among the factors that inspired the United States to start closer political and military cooperation with Tashkent. The administration in Washington had expected that closer contacts might galvanise political, economic and social change in Uzbekistan, thus reinforcing positive trends in other countries of the region as well. But the relations between Washington and Tashkent are in crisis (which the United States will certainly try to overcome), and we have seen rapprochement between Uzbekistan and Russia and China.

Strain-induced structural instability in FeRh

We perform density functional calculations to investigate the structure of the intermetallic alloy FeRh under epitaxial strain. Bulk FeRh exhibits a metamagnetic transition from a low-temperature antiferromagnetic (AFM) phase to a ferromagnetic phase at 350 K, and its strain dependence is of interest for tuning the transition temperature to the room-temperature operating conditions of typical memory devices. We find an unusually strong dependence of the structural energetics on the choice of exchange-correlation functional, with the usual local density approximation yielding the wrong ground-state structure, and generalized gradient (GGA) extensions being in better agreement with the bulk experimental structure. Using the GGA we show the existence of a metastable face-centered-cubic-like AFM structure that is reached from the ground-state body-centered-cubic-like AFM structure by following the epitaxial Bain path. We show that the behavior is well described using nonlinear elasticity theory, which captures the softening and eventual sign change of the orthorhombic shear modulus under compressive strain, consistent with this structural instability. Finally, we predict the existence of an additional unit-cell-doubling lattice instability, which should be observable at low temperature.

Caractérisation tridimensionnelle de l’amplitude articulaire de l’épaule

L’épaule est l’articulation la plus mobile et la plus instable du corps humain dû à la faible quantité de contraintes osseuses et au rôle des tissus mous qui lui confèrent au moins une dizaine de degrés de liberté. La mobilité de l’épaule est un facteur de performance dans plusieurs sports. Mais son instabilité engendre des troubles musculo-squelettiques, dont les déchirures de la coiffe des rotateurs sont fréquentes et les plus handicapantes. L’évaluation de l’amplitude articulaire est un indice commun de la fonction de l’épaule, toutefois elle est souvent limitée à quelques mesures planaires pour lesquelles les degrés de liberté varient indépendamment les uns des autres. Ces valeurs utilisées dans les modèles de simulation musculo-squelettiques peuvent amener à des solutions non physiologiques. L’objectif de cette thèse était de développer des outils pour la caractérisation de la mobilité articulaire tri-dimensionnelle de l’épaule, en passant par i) fournir une méthode et son approche expérimentale pour évaluer l’amplitude articulaire tridimensionnelle de l’épaule incluant des interactions entre les degrés de liberté ; ii) proposer une représentation permettant d’interpréter les données tri-dimensionnelles obtenues; iii) présenter des amplitudes articulaires normalisées, iv) implémenter une amplitude articulaire tridimensionnelle au sein d’un modèle de simulation numérique afin de générer des mouvements sportifs optimaux plus réalistes; v) prédire des amplitudes articulaires sécuritaires et vi) des exercices de rééducation sécuritaires pour des patients ayant subi une réparation de la coiffe des rotateurs. i) Seize sujets ont été réalisé séries de mouvements d’amplitudes maximales actifs avec des combinaisons entre les différents degrés de liberté de l’épaule. Un système d’analyse du mouvement couplé à un modèle cinématique du membre supérieur a été utilisé pour estimer les cinématiques articulaires tridimensionnelles. ii) L’ensemble des orientations définies par une séquence de trois angles a été inclus dans un polyèdre non convexe représentant l’espace de mobilité articulaire prenant en compte les interactions entre les degrés de liberté. La combinaison des séries d’élévation et de rotation est recommandée pour évaluer l’amplitude articulaire complète de l’épaule. iii) Un espace de mobilité normalisé a également été défini en englobant les positions atteintes par au moins 50% des sujets et de volume moyen. iv) Cet espace moyen, définissant la mobilité physiologiques, a été utilisé au sein d’un modèle de simulation cinématique utilisé pour optimiser la technique d’un élément acrobatique de lâcher de barres réalisée par des gymnastes. Avec l’utilisation régulière de limites articulaires planaires pour contraindre la mobilité de l’épaule, seulement 17% des solutions optimales sont physiologiques. En plus, d’assurer le réalisme des solutions, notre contrainte articulaire tridimensionnelle n’a pas affecté le coût de calculs de l’optimisation. v) et vi) Les seize participants ont également réalisé des séries d’amplitudes articulaires passives et des exercices de rééducation passifs. La contrainte dans l’ensemble des muscles de la coiffe des rotateurs au cours de ces mouvements a été estimée à l’aide d’un modèle musculo-squelettique reproduisant différents types et tailles de déchirures. Des seuils de contrainte sécuritaires ont été utilisés pour distinguer les amplitudes de mouvements risquées ou non pour l’intégrité de la réparation chirurgicale. Une taille de déchirure plus grande ainsi que les déchirures affectant plusieurs muscles ont contribué à réduire l’espace de mobilité articulaire sécuritaire. Principalement les élévations gléno-humérales inférieures à 38° et supérieures à 65°, ou réalisées avec le bras maintenu en rotation interne engendrent des contraintes excessives pour la plupart des types et des tailles de blessure lors de mouvements d’abduction, de scaption ou de flexion. Cette thèse a développé une représentation innovante de la mobilité de l’épaule, qui tient compte des interactions entre les degrés de liberté. Grâce à cette représentation, l’évaluation clinique pourra être plus exhaustive et donc élargir les possibilités de diagnostiquer les troubles de l’épaule. La simulation de mouvement peut maintenant être plus réaliste. Finalement, nous avons montré l’importance de personnaliser la rééducation des patients en termes d’amplitude articulaire, puisque des exercices passifs de rééducation précoces peuvent contribuer à une re-déchirure à cause d’une contrainte trop importante qu’ils imposent aux tendons.

Tom Harmon adjusting Forest Evashevski 's shoulder pads in locker room

[for Chicago Daily News]

Vehicle shoulder encroachment and lateral placement study. Final report.

Mode of access: Internet.

Value engineering study of highway shoulder maintenance /

FCP category 7.

Development of an intervention program to encourage shoulder harness use and aircraft retrofit in general aviation aircraft: phases I and II.

Federal Aviation Administration, Office of Aviation Medicine, Washington, D.C.