Desenvolvimento de bloco de vedação com barita na composição de partida para blindagem de radiação X

This work main objective is to study the use of bricks in barium X-rays rooms in order to contribute to the optimization of shielding rooms diagnosis. The work was based on experimental measurements of X-ray attenuation (40 to 150 kV), using ceramic seal bearing the incorporation of barium sulfat (BaSO4). Different formulations were studied in three different firing temperatures and evaluated for incorporation in the ceramic body. The composition of 20% of barite processed at a temperature of 950 ° C showed better physical and mechanical properties, is considered the most suitable for the purpose of this work. Were produced bricks sealing composition formulated based on that presented the best technological features. These blocks were tested physically as a building material and wall protective barrier. Properties such as visual, deviation from the square, face flatness, water absorption and compressive strength were evaluated for all the blocks produced. The behavior of this material as attenuator for X-rays was investigated by experimental results which take into account mortar manufacturers barium through the different strains and compared with the reference material (Pb). The simulation results indicated that the ceramic block barium shows excellent properties of attenuation equivalence lead taking into account the energy used in diagnostic X-ray

Estudo da incorporação da cal em composições binárias de solo-cimento para produção de tijolos maciços

The use of binders in the soil for the production of solid bricks is an old construction technique that has been used by several civilizations over time. At the same time, the need for environmental preservation and the tendency of scarcity of natural resources make the construction invest in researching new concepts, methods and materials for building systems for the sustainability of their economic activities. Thus arises the need to obtain building materials with low power consumption, capable of reducing the growing housing shortage of rural and urban population. Currently, research has been conducted on this topic to better understand the cementitious and pozzolanic reactions that occur in the formation of the microstructure of the soil-cement when added to other materials such as, for example, lime, and the relationship between microstructure and formed interfaces with the physical, mechanical and chemical analysis in compounds made from these ternary compositions. In this context, this study aimed to analyze the results of the influence of the incorporation of lime to the soil-cement to form a ternary mixture to produce soil-cement bricks and mortar without structural purposes. From the inclusion of contents of 6 %, 8 %, 10% and 12% lime to the soil, and soil-cement mixes in amounts of 2 %, 3 %, 4 % and 5 % were shaped-bodies of -cylindrical specimens to determine the optimum moisture content and maximum dry apparent specific weight. Then they were cured, and subjected to the tests of compressive strength, absorption and durability modified. Compositions obtained the best results in the tests performed on the bodies-of-proof cylindrical served as a parameter for molding of solid bricks, which underwent the same experimental methodology previously cited. The raw materials used, as well as compositions in which the bricks were molded solid, were characterized by physical and chemical tests, X-ray diffraction and scanning electron microscopy. The results obtained in the study indicate that the compositions studied, that showed the best results in terms of compressive strength, water absorption and durability ternary composition was soil, 10 % cement and 2 % lime

Simulador radiográfico antropomórfico de mama humana

Mammography is a diagnostic imaging method in which interpretation depends on knowledge of radiological aspects as well as the clinical exam and pathophysiology of breast diseases. In this work a mammography phantom was developed to be used for training in the operation of mammographic x-ray equipment, image quality evaluation, self-examination and clinical examination of palpation. Polyurethane was used for the production of the phantoms for its physical and chemical properties and because it is one of the components normally used in prostheses. According to the range of flexibility of the polyurethane, it was possible to simulate breasts with higher or lower amount of adipose tissue. Pathologies such as areolar necrosis and tissue rejection due to surgery reconstruction after partial mastectomy were also simulated. Calcifications and nodules were simulated using the following materials: polyethylene, poly (methyl methacrylate), polyamide, polyurethane and poly (dimethyl silicone). Among these, polyethylene was able to simulate characteristics of calcification as well as breast nodules. The results from mammographic techniques used in this paper for the evaluation of the phantoms are in agreement with data found in the literature. The image analyses of four phantoms indicated significant similarities with the human skin texture and the female breast parenchyma. It was possible to detect in the radiographic images produced regions of high and low radiographic optical density, which are characteristic of breasts with regions of different amount of adipose tissue. The stiffnesses of breast phantoms were adjusted according to the formulation of the polyurethane which enabled the production of phantoms with distinct radiographic features and texture similar to human female breast parenchyma. Clinical palpation exam of the phantoms developed in this work indicated characteristics similar to human breast in skin texture, areolar region and parenchyma

Efeito das variáveis laboratoriais protéticas na adesão da porcelana com ligas de níquel-cromo

The metalceramic crowns are usually used in dentistry because they provide a resistant structure due to its metallic base and its aesthetics from the porcelain that recovers this structure. To manufacture these crowns, a series of stages should be accomplished in the prosthetic laboratories, and many variables can influence its success. Changes in these variables cause alterations in the metallic alloy and in the porcelain, so, as consequence, in the adhesion between them. The composition of the metal alloy can be modified by recasting alloys, a common practice in some prosthetic laboratories. The aim of this paper is to make a systematic study investigating metalceramic crowns as well as analyzing the effect of recasting Ni-Cr alloys. Another variable which can influence the mechanism of metalceramic union is the temperature used in firing porcelain procedure. Each porcelain has to be fired in a fixed temperature which is determined by the manufacturer and its change can cause serious damages. This research simulate situations that may occur on laboratory procedures and observe their consequences in the quality of the metalceramic union. A scanning eletron microscopy and an optic microscopy were accomplish to analyse the metal-ceramic interface. No differences have been found when remelting alloys were used. The microhardness were similar in Ni-Cr alloys casted once, twice and three times. A wettability test was accomplished using a software developed at the Laboratório de Processamento de Materiais por Plasma, on the Universidade Federal do Rio Grande do Norte. No differences were found in the contact angle between the solid surface (metallic substratum) and the tangencial plane to the liquid surface (opaque). To analyse if the temperature of porcelain firing procedure could influence the contact area between metal and porcelain, a variation in its final temperature was achieve from 980° to 955°C. Once more, no differences have been found

Desenvolvimento e otimização de snacks saudáveis à base de iogurte

Mestrado em Engenharia Alimentar - Instituto Superior de Agronomia - UL

Conservação e restauro de azulejo: metodologias de intervenção vs indicadores de compatibilidade

A escassez de parâmetros técnicos e científicos e o caráter subjetivo que em regra preside à escolha de determinado material, produto ou técnica suscitaram o interesse pelo presente tema onde se procurou aumentar as ferramentas de análise e de apoio à decisão em intervenções de conservação do património azulejar. Procurou compreender-se o azulejo a nível histórico, estético, técnico e material, estudando-o do ponto de vista físico, químico e mineralógico. Comparando o azulejo com as réplicas produzidas para intervenções de conservação e restauro estudadas, concluiu-se que as suas composições, química e mineralógica, são diferentes, embora não se verifiquem tantas dissemelhanças ao nível das propriedades físicas. As linhas orientadoras da conservação e restauro de azulejo foram lançadas por Santos Simões a partir dos anos 40 do séc. XX e, desde então, foi-se desenvolvendo um pouco à margem das restantes áreas de especialidade, mesmo ao nível do ensino. Os resultados do inquérito internacional junto dos profissionais que trabalham em conservação e restauro de azulejo in situ corroboram de certo modo este facto e, simultaneamente, permitem uma apreensão da situação atual. Constatou-se uma quase total ausência de documentação sobre intervenções realizadas, mas a análise de casos de estudo e de relatórios permitiu uma primeira sistematização da informação disponível segundo os materiais correntemente utilizados. Procedeu-se a uma identificação e tipificação de patologias decorrentes das intervenções procurando entender qual o papel que tiveram os materiais utilizados e as técnicas de intervenção no desempenho das intervenções. Os processos de reintegração volumétrica e cromática mereceram uma maior atenção, procedendo-se à simulação de todo o sistema, em contexto laboratorial, com base nos materiais correntemente utilizados. Os resultados revelam comportamento diferenciado dos materiais de origem orgânica e inorgânica, evidenciando estes últimos uma maior compatibilidade com o azulejo, mas um pior desempenho a médio/longo prazo. O reconhecimento das soluções mais ou menos compatíveis permitiu delinear uma metodologia de avaliação da compatibilidade, da eficácia e do desempenho dos materiais e das técnicas utilizadas, contribuindo também para a definição de algumas recomendações e de critérios de atuação; Abstract The lack of information found, when selecting a material, product or technique, to apply on a specific conservation treatment contributed to the interest on this topic. The historical, aesthetic and technical characteristics of the azulejo was researched by studying their physical, chemical and mineralogical properties. Comparing original azulejos with the replicas produced for conservation treatments studied, it was concluded that the chemical and mineralogical composition is different, although there are less dissimilarities in terms of physical properties. The guidelines for conservation and restoration were launched by Santos Simões in the 40s and since then, it has been developing a bit on the sidelines of the remaining areas of expertise, even at an educational level. The results of an international survey, near professionals working in conservation and restoration of azulejo in situ, corroborate this fact and simultaneously allow an insight of the current situation. It was found an almost complete lack of technical documentation about previous conservation interventions, but the analysis of existent case studies and intervention reports permitted a systematization of the available information, also considering the materials commonly used. The identification and characterization of damages resulting from interventions, was performed trying to establish a correlation with the materials used and intervention techniques. The attention focused on the study of the infills and chromatic reintegration and a simulation of the entire system was developed, in a laboratory context, on the basis of commonly used materials. The results reveal a distinct behavior between the organic and inorganic materials, showing the latter greater compatibility with the azulejos but a worse medium/long-term performance. The recognition of more or less compatible solutions allowed to outline a methodology to evaluate the compatibility, efficiency and performance of materials and techniques used, also contributing to define some recommendations and action criteria.

Establishment of a protocol for the cryopreservation of cell sheets of adipose tissue stem cells

Dissertação de Mestrado, Ciências Biomédicas, Departamento de Ciências Biomédicas e Medicina, Universidade do Algarve, 2016

Estudo da molhabilidade de tecidos 100% poliéster tratados em plasma N2/O2 em função do seu envelhecimento natural

This work reports the influence of the poly (ethylene terephthalate) textile surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min. Other parameters, such as working gas composition and treatment time, were modified as the following: to the O2 plasma modified samples only the treatment time was changed (10, 20, 30, 40, 50 and 60 minutes). To the plasma with O2 and N2 only the chemical concentrations were changed. Through Capillary tests (vertical) an increase in textile wettability was observed as well as its influence on aging time and its consequence on wettability. The surface functional groups created after plasma treatments were investigated using X-ray Photoelectron Spectroscopy (XPS). The surface topography was examined by scanning electron microscope (SEM)

Estudo termo-mecânico de interconector metálico recoberto com filme de La0,8Ca0,2CrO3 e de interconector cerâmico de La0,8Sr0,2Cr0,92Co0,08O3 para PaCOS

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test

Sinterização de matrizes cerâmicas à base de alumina reforçadas por carbetos a partir de precursores poliméricos

Ceramic composites produced with polymerics precursors have been studied for many years, due to the facility of obtaining a complex shape, at low temperature and reduces cost. The main objective of this work is to study the process of sintering of composites of ceramic base consisting of Al2O3 and silicates, reinforced for NbC, through the technique of processing AFCOP, as well as the influence of the addition of LZSA, ICZ and Al as materials infiltration in the physical and mechanical properties of the ceramic composite. Were produced ceramic matrix composites based SiCxOy e Al2O3 reinforced with NbC, by hidrosilylation reaction between D4Vi and D1107 mixtured with Al2O3 as inert filler, Nb and Al as reactive filler. The specimens produced were pyrolised at 1200, 1250 and 1400°C and infiltred with Al, ICZ and LZSA, respectively. Density, porosity, flexural mechanical strength and fracture surface by scanning electron microscopy were evaluated. The microstructure of the composites was investigated by X-ray diffraction to identify the presence of crystalline phases. The composites presented apparent porosity varying of 31 up to 49% and mechanical flexural strength of 14 up to 34 MPa. The infiltration process improviment of the densification and reduction of the porosity, as well as increased the values of mechanical flexural strength. The obtained phases had been identified as being Al3Nb, NbSi2, Nb5S3, Nb3Si and NbC. The samples that were submitted the infiltration process presented a layer next surface with reduced pores number in relation to the total volume

Correlações nos dfa de diversos perfis geológicos. estudo de caso: Bacia de Campos - RJ

This work aims to study the fluctuation structure of physical properties of oil well profiles. It was used as technique the analysis of fluctuations without trend (Detrended Fluctuation Analysis - DFA). It has been made part of the study 54 oil wells in the Campo de Namorado located in the Campos Basin in Rio de Janeiro. We studied five sections, namely: sonic, density, porosity, resistivity and gamma rays. For most of the profiles , DFA analysis was available in the literature, though the sonic perfile was estimated with the aid of a standard algorithm. The comparison between the exponents of DFA of the five profiles was performed using linear correlation of variables, so we had 10 comparisons of profiles. Our null hypothesis is that the values of DFA for the various physical properties are independent. The main result indicates that no refutation of the null hypothesis. That is, the fluctuations observed by DFA in the profiles do not have a universal character, that is, in general the quantities display a floating structure of their own. From the ten correlations studied only the profiles of density and sonic one showed a significant correlation (p> 0.05). Finally these results indicate that one should use the data from DFA with caution, because, in general, based on geological analysis DFA different profiles can lead to disparate conclusions

Pirólise termoquímica de pós da fibra de coco seco em um reator de cilindro rotativo para produção de bio-óleo

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Avaliação do fracionamento húmico em solo tratado com lodo de esgoto.

Entre as diversas alternativas existentes para a utilização do lodo de esgoto, a para fins agrícolas apresenta-se como uma das mais convenientes. Uma das vantagens de sua aplicação repousa no fato de que esse composto contém substâncias húmicas que aumentam a capacidade de retenção de água e nutrientes, além de contribuirem para a melhoria das propriedades físicas do solo, funcionando, nesse caso, como um condicionador. Essas substâncias são encontradas em lodo de esgoto proveniente de estações de tratamento de esgoto, o qual pode ser empregado como fertilizante, com certas restrições. Este trabalho pretende avaliar a distribuição das substâncias húmicas em solo adubado com lodo de esgoto de duas origens (industrial e doméstico), através de dois métodos extrativos de matéria orgânica: Kononova e uma modificação brasileira do protocolo da Sociedade Internacional de Substânicas Húmicas (IHSS). Os resultados obtidos indicaram que a extração de Kononova foi o método que melhor evidenciou a influência dos dois diferentes tipos de lodo na distribuição diferencial das substâncias húmicas no solo estudado.

Soil organic carbon, carbon stock and their relationships to physical attributes under forest soils in Central Amazonia.

The soil carbon under Amazonian forests has an important roles in global changing, making information on the soil content and depths of these stocks are considerable interest in efforts to quantify soil carbon emissions to the atmosphere.This study quantified the content and soil organic carbon stock under primary forest up to 2 m depth, at different topographic positions, at Cuieiras Biological Reserve, Manaus/ ZF2, km 34, in the Central Amazon, evaluating the soil attributes that may influence the permanence of soil carbon. Soil samples were collected along a transect of 850 m on topographic gradient Oxisol (plateau), Ultisol (slope) and Spodosol (valley). The stocks of soil carbon were obtained by multiplying the carbon content, soil bulk density and trickiness of soil layers. The watershed was delimited by using STRM and IKONOS images and the carbon contend obtained in the transects was extrapolated as a way to evaluate the potential for carbon stocks in an area of 2678.68 ha. The total SOC was greater in Oxisol followed by Spodosol and Ultisol. It was found direct correlations between the SOC and soil physical attributes. Among the clay soils (Oxisol and Ultisol), the largest stocks of carbon were observed in Oxisol at both the transect (90 to 175.5 Mg C ha-1) as the level of watershed (100.2 to 195.2 Mg C ha-1). The carbon stocks under sandy soil (Spodosol) was greater to clay soils along the transect (160-241 Mg C ha-1) and near them in the Watershed (96.90 to 146.01 Mg C ha-1).

Movimento da atrazina numa terra roxa estruturada eutrófica.

Verificou-se o deslocamento de atrazina no perfil do solo, em função do movimento da água e do tempo de aplicação, e possíveis influencias de fluxos preferenciais sobre a lixiviação. O trabalho foi conduzido em uma Terra Roxa Estruturada eutrófica de textura argilosa, em Piracicaba-SP, no período de junho de 92 a fevereiro de 93. Foram instalados 2 experimentos, sendo um com a cultura do milho irrigado (experimento 1) e o outro em solo nu (experimento 2). O experimento 1 foi instalado em uma área de 1000m2 sobre a qual se demarcou duas parcelas de 12m x 12m separadas uma da outra por 18m. Uma parcela foi irrigada e a outra fertirrigada . O experimento 2 foi instalado em duas parcelas de 7m x 7m, separadas uma da outra por 5m. Em uma das parcelas do experimento 2 aplicou-se previamente 1000kg de calcario/ha para elevar a saturação de bases para 88%, alem de 500kg de gesso/ha. Cada parcela do experimento 2 foi constituída de 3 linhas de instrumentos e os resultados obtidos para cada linha foram comparados entre si para verificação de fluxo preferencial. A atrazina foi aplicada na dosagem de 6,3l/ha no experimento 1 e 6kg do principio ativo/ha no experimento 2. Os resultados mostraram intensa lixiviação da atrazina em todo o perfil do solo ate 150cm de profundidade já na primeira coleta efetuada 7 dias apos a aplicação. A parcela 2 do experimento 2 , apesar de não ter recebido calcario, mostrou perdas de atrazina por lixiviação muito maiores que a parcela 1. O solo apresentou pequena capacidade de adsorção de atrazina (máximo em torno de 10% na camada de 0-30cm).