Comparative electrical behavior at low and high current of SnO(2)- and ZnO-based varistors

The complete I-V characteristics of SnO(2)-based varistors, particularly of the Pianaro system SCNCr consisting in 98.9%SnO(2)+1%CoO+0.05%Nb(2)O(5)+0.05%Cr(2)O(3), all in mol%, have been seldom reported in the literature. A comparative study at low and high currents of the nonohmic behavior of SCNCr- and ZnO-based varistors (modified Matsuoka system) is proposed in this work. The SCNCr system showed higher nonlinearity coefficients in the whole range of measured current. The electrical breakdown field (E(b)) was twice as high for the SCNCr system (5400 V/cm) than for the ZnO varistor (2600 V/cm) due to a smaller average grain size of the former (4.5 mu m) with respect to the latter (8.5 mu m). Nevertheless, we consider that another important factor responsible for the high E(b) in the SCNCr system is the great number of electrically active interfaces (85%) as determined with electrostatic force microscopy (EFM). It was also established that the SCNCr system might be produced in disks of smaller dimensions than that of commercial ZnO-based product, with a 5.0 cm(-1) minimal area-volume (A/V) ratio. The SCNCr reached the saturation current in a short time because of the high resistivity of the grains, which is five times higher than that of the grains in ZnO-based varistors.

Ageing behavior in the Cu-10 wt.%Al and Cu-10 wt.%Al-4 wt.%Ag alloys

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal behavior of cellulose acetate produced from homogeneous acetylation of bacterial cellulose

Cellulose acetate (CA) is one of the most important cellulose derivatives and its main applications are its use in membranes, films, fibers, plastics and filters. CAs are produced from cellulose sources such as: cotton, sugar cane bagasse, wood and others. One promissory source of cellulose is bacterial cellulose (BC). In this work, CA was produced from the homogeneous acetylation reaction of bacterial cellulose. Degree of substitution (DS) values can be controlled by the acetylation time. The characterization of CA samples showed the formation of a heterogeneous structure for CA samples submitted to a short acetylation time. A more homogeneous structure was produced for samples prepared with a long acetylation time. This fact changes the thermal behavior of the CA samples. Thermal characterization revealed that samples submitted to longer acetylation times display higher crystallinity and thermal stability than samples submitted to a short acetylation time. The observation of these characteristics is important for the production of cellulose acetate from this alternative source. (C) 2008 Elsevier B.V. All rights reserved.

Redox Behavior of molybdenum and tungsten in phosphate glasses

In this work, vitreous samples were prepared in the binary system (100 - x)NaPO3-xMO(3) with M = Mo and W and x varying from 10 to 60. The transmittance properties in the UV, visible, and near-infrared were monitored as a function of MO3 concentration. In both cases, an increase in the amount of transition metal results in an intense and broad absorption band in the visible and near-infrared attributed to metal reduction under synthesis conditions. It was shown that this large absorption can be partially or totally removed using specific oxidizing agents or by improving synthesis parameters such as melting temperature or cooling rate of the melt. In addition, structural investigations by Raman and X-ray absorption spectroscopy suggest that reduction only occurs when the metal cation is in octahedral geometry and that the transmittance improvement is not related with any structural changes. These results were explained in terms of thermodynamic equilibrium of redox species in the melt and allowed to obtain for the first time transparent and chemically stable glasses containing high concentrations of MO3 with transition metals in octahedral geometry inside the glass network.

Reproductive behavior and parental roles of the cichlid fish Laetacara araguaiae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Guiana dolphins (Sotalia guianensis) displaying beach hunting behavior in the Cananéia Estuary, Brazil: social context and conservation issues

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Image analysis for assessing broiler breeder behavior response to thermal environment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ingestive behavior and performance of female lambs grazing on Marandu palisadegrass under different stocking rates

The ingestive behavior and performance of female lambs grazing on Marandu pasture submitted to different stocking rates during the rainy and transition season were evaluated. The experimental area with 4,500 m² was divided into 45 paddocks of 100 m². Twenty-seven Santa Ines female lambs (purebred) with 4 months age and 22 kg of initial body weight were distributed in a completely randomized design, with nine replicates. Lambs were divided into 9 groups with the same initial weight and submitted to three stocking rates: 2, 3 and 4 lambs/paddock, which corresponded to 40, 60 and 80 lambs/ha, respectively. Each group of animals had a module of five paddocks, managed on intermittent grazing system, with 7 days of occupation and 28 d of rest. Increase on time grazing and reduction on time ruminating and resting were observed as stocking rates increased. There was 14% raise in time grazing and 41% decline on time resting by lambs subjected to the highest stocking rate compared with those in the lower stocking rate. The number of animals/ha promoted linear effect on average daily gain, which was higher for animals in the lowest stocking rate of 90 g/d. For gain per area, the best result was obtained with 60 animals/ha featuring an average value of 426 kg/ha.

Electrochemical behavior of metallic chromium in chloride media

The electrochemical behavior of metallic chromium in aqueous solutions containing chloride ions at different pH was studied by means of open-circuit potential vs. time measurements, cyclic voltammetry and electrochemical impedance spectroscopy. The composition of the surface oxides was analyzed by XPS. For solutions with pH<3 the formation of a passive layer occurs via a dissolution/precipitation process while for pH>3 the mechanism changes. XPS analysis revealed that Cr2O3 basically constitutes the passive layer.

THAUMATOMYRMEX STRIPS MILLIPEDES FOR PREY - A NOVEL PREDATORY BEHAVIOR IN ANTS, AND THE 1ST CASE OF SYMPATRY IN THE GENUS (HYMENOPTERA, FORMICIDAE)

We describe, for the first time, the predatory behaviour of Thaumatomyrmex ants on millipedes of the family Polyxenidae, based on field observations of T. atrox and a field and laboratory study of T. contumax. The capture of the prey and the removal process of its body-covering setae by the ants before they eat the millipede are described. This specialized behaviour in at least two species of the genus, belonging to two distinct groups of species, indicates a general trend in Thaumatomyrmex. We coupled this study with a comparative morphological analysis of the mouthparts and digestive tube of these and other Thaumatomyrmex species. Also, we report the first case of sympatry in the genus, which suggests that Thaumatomyrmex includes several species. and not only one highly variable taxon, as hypothesized earlier.

ETHOPHARMACOLOGICAL ANALYSIS OF RAT BEHAVIOR ON THE ELEVATED PLUS-MAZE

Behavioral categories were measured in rats left on an elevated plus-maze for 5 min, in addition to the traditional measures. Four independent factors emerged from a factor analysis. The variables that loaded highly and positively on Factor 1, seemingly related with anxiety, were: number of entries onto open arms, time spent on open arms, percentage of open/total arm entries, percentage of time on open arms, scanning over the edge of an open arm, and open arm end-exploring. The time spent on enclosed arms loaded highly, but negatively on the same factor. Risk-assessment from an enclosed arm also loaded negatively on Factor 1. Number of enclosed arm entries, total number of arm entries and rearing loaded highly on Factor 2, probably related to motor activity. However, the total number of entries also loaded on Factor 1, being thus a mixed index. Similarly, the number of open arm entries loaded on both Factors 1 and 2. As expected, the variables having high loads on Factor 1 were changed to one direction by administration of two anxiolytics (nitrazepam and midazolam) and to the opposite direction by two anxiogenic drugs (pentylenetetrazol and FG 7142). Such pattern of drug effects was not observed with the remaining variables.

Genotypic evaluation of Dent composite (Zea mays L) half-sib progenies in late harvest crop conditions

The present work was conducted at FCAV-UNESP, Campus de Jaboticabal, in late harvest crop time of 1991. One hundred interpopulational hybrids obtained from a top-cross between Dent Composite and Flint Composite populations were evaluated. The analyzed characteristics were: Spodoptera frugiperda damages, lodging, damaged ears percentage, and productivity. Estimates of heritability, variance between progenies and genetical gain for each character of available population were determined. Estimates of the progenies variance, like those from heritability for the different analysed characters, indicate that there is an adequate genetical variance for the utilization of that material on subsequent genetic breeding programs, though allowing genetical gains, on the following selection cycles for the characteristics: grain weight, lodging and damages caused by armyworm larvae, whereas for the other characteristics the obtained results were not satisfactory.

Visual timing and adaptive behavior in a road-crossing simulation study

In this road-crossing simulation study, we assessed both participant's ability to visually judge whether or not they could cross a road, and their adaptive walking behavior. To this end, participants were presented with a road inside the laboratory on which a bike approached with different velocities from different distances. Eight children aged 5-7, ten children aged 10-12, and ten adults were asked both to verbally judge whether they could cross the road, and to actually walk across the road if possible. The results indicated that the verbal judgments were not similar to judgments to actually cross the road. With respect to safety and accuracy of judgments, groups did not differ from each other, although the youngest group tended to be more cautious. All groups appeared to use a strategy to cross the road based both on the distance and the velocity of the approaching bike. Young children waited longer on the curb before crossing the road than older children and adults. All groups adjusted their crossing time to the time-to-arrival of the bike. These findings are discussed in relation to the ecological psychological approach and the putative dissociation between vision for perception (i.e. verbal judgment) and vision for action (i.e. actual crossing). (c) 2004 Elsevier Ltd. All rights reserved.

UNIFORMLY ACCELERATED FINITE-TIME DETECTORS

The behavior of uniformly accelerated detectors in the Minkowski and Rindler vacua is analyzed when the detector is coupled to a scalar field during a finite amount of time T. We point out that the logarithmic ultraviolet divergences reported in the literature are due to the instantaneous switching of the detector. We explicitly show this by considering a detector switched on and off continuously. The usual Planckian spectrum for the excitation probability is recovered in the limit T --> infinity.

Extraction and exchange behavior of metal species in therapeutically applied peat

The binding and availability of metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) in therapeutically applied peat (GroBes Gifhorner Moor, Sassenburg/North Germany) was characterized by means of a versatile extraction approach. Aqueous extracts of peat were obtained by a standardized batch equilibrium procedure using high-purity water (pH 4.5 and 5.0), 0.01 mol l(-1) calcium chloride solution, 0.0 1 mol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.01 mol l(-1) diethylenetriarnine pentaacetic acid (DTPA) solution as metal extractants. In addition, the availability of peat-bound metal species was kinetically studied by collecting aliquots of extracts after different periods of extraction time (5, 10, 15, 30, 60 and 120 min). Metal determinations were performed by atomic spectrometry methods (AAS, ICP-OES) and dissolved organic matter (DOM) was characterized by UV/Vis measurements at 254 and 436 nm, respectively. of the extractants studied Ca, Mg and Mn were the most available metals, in contrast to peat-bound Fe and Al. The relative standard deviation s(r) of the developed extraction procedures was mostly in the range of 4 to 20%, depending on the metal and its concentration in peat. A pH increase favored the extraction of metals and DOM from peat revealing complex extraction kinetics. Moreover, a competitive exchange between peat-bound metal species and added Cu(II) ions showed that > 100 mg of Cu(II) per 50 g wet peat was necessary to exchange the maximum of bound metals (e.g. 21.8% of Al, 3.9% of Fe, 79.0% of Mn, 81.9% of Sr, related to their total content). (C) 2002 Elsevier B.V. B.V. All rights reserved.